MATERIAL SAFETY DATA SHEET CWT-11

Size: px

Start display at page:

Download "MATERIAL SAFETY DATA SHEET CWT-11"

Brendan Conley
5 years ago
Views:

1 1. Product and Manufacturer Identification Product Name: Manufacturer: Apollo Technologies, Inc Santa Margarita Parkway, Suite A-219 Rancho Santa Margarita, Ca For more information call: (949) In case of emergency call: (24 hours per day, 7 days per week) Chem-Tel (800) Composition- Ingredients INGREDIENT NAME CAS NUMBER Phosphonobutane-tricarboxylic acid Maleic Acid Phosphoric Acid TT This product contains materials which are considered a trade secret. This Material Safety Data Sheet conveys all of the relevant safety information for the ingredients. 3. Hazards Identification Potential Health Hazards Skin: Mist and solutions will cause severe skin irritation. May cause permanent skin damage. Eyes: Mist or solutions will cause burns to the eyes. Inhalation: May cause irritation to the respiratory tract. Ingestion: Do not induce vomiting. Rinse with large quantities of water or milk first. 1

2 4. First Aid Measures Skin: Immediately wash skin with soap and water. Remove contaminated clothing and wash in an industrial laundry before reusing. Get medical attention if the irritation persists. Bring this MSDS to the health care provider. Eyes: Flush eyes immediately with water for at least 15 minutes. Hold the lids back and allow water to thoroughly irrigate the eye. Seek prompt medical attention. Inhalation: Remove to fresh air. Seek prompt medical attention if signs of suffocation, irritation or anaphylactic shock occur. Ingestion: If the person is conscious, give plenty of milk or water. Get immediate medical attention. 5. Fire Fighting Measures Flammable Properties Flash Point: Not Flammable Auto ignition temperature Not Applicable Extinguishing Media: Material is not flammable. Use extinguishing media appropriate for surrounding fire. Unusual Fire and Explosion Hazards:. Special Fire Fighting Measures: Wear positive pressure self-contained breathing apparatus. Use water spray to keep containers cool. 6. Accidental Release Measures In case of spill or other material release: Wear appropriate personal protective equipment. Dike spills and recover material. 7. Handling and Storage Normal Handling: Avoid contact with eyes, skin and clothing. Do not eat or drink in the material handling and storage area. Practice good personal hygiene and housekeeping. 2

3 Storage Recommendations: Store in a cool, dry, well ventilated area away from strong alkalis and oxidizers. Keep container closed when not in use. 8. Exposure Controls/ Personal Protective Equipment Engineering Controls: Use local exhaust if misting occurs or during a release. Do not handle within an unventilated space. Personal Protective Equipment Skin Protection: When handling solutions, wear Nitrile rubber gloves and a rubber apron or other impervious clothing. Eye Protection: Wear a head covering and chemical safety goggles. Do not wear contact lenses or impact resistant safety glasses. Respiratory Protection: Use a NIOSH approved respirator for dusts and mists. Wear a respirator approved for use with acid gas in the event of a release. A self contained or supplied air respirator may be required. An eye wash and safety shower is also required. 9. Exposure Controls/ Personal Protective Equipment- Continued Exposure Guidelines: Ingredient ACGIH TLV OSHA PEL Sodium Sulfite Sodium Metabisulfite 5 mg/kg 5 mg/kg Exposure Limit for hazardous decomposition products: Sulfur Dioxide- 2 ppm 5 ppm 10. Physical and Chemical Properties Appearance: Clear to hazy color Physical State: Liquid Odor: Slight odor Specific Gravity: (water = 1) 3

4 11. Stability and Reactivity Normally Stable. Avoid high temperatures. Incompatibilities: Strong Oxidizers and alkalis. Hazardous Decomposition Products: Oxides of carbon and phosphorous. 12. Toxicology Information Acute (Immediate) Effects: Corrosive. Causes severe skin irritation and can cause severe burns. Delayed Effects: None expected. 13. Ecological Information None found 14. Disposal Considerations RCRA: This material is not a listed hazardous waste. Dispose of in accordance with federal, state and local regulations. Do not neutralize for disposal or send to sewer. 15. Transport Information US DOT: UN3265, CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. (phosphinocarboxylic Acid copolymer), Class 8, P.G. III (ERG guide 153) 4

5 16. Regulatory Information Toxic Substances Control Act TSCA: All components are listed on the TSCA Inventory of Chemical Substances SARA Title III/CERCLA There are no reportable quantities (RQ s) or Threshold Planning Quantities (TPQ s) for any of the ingredients. Section 312 Hazard Class: Immediate (Irritant) Chronic : None SARA 313 Toxic Chemicals: None State Right to Know Lists 17. Other Information NFPA = Health -3 Fire -0 Reactivity 1 Warning label: Corrosive Current Issue Date: March 3, 2009 Revision Date: March 3, 2011 unless otherwise noted 5

SAFETY DATA SHEET BWT-12 L

SAFETY DATA SHEET BWT-12 L 1. Product and Manufacturer Identification Product Name: Manufacturer: Apollo Technologies, Inc. 31441 Santa Margarita Parkway, Suite A-219 Rancho Santa Margarita, Ca. 92688 For more information call: