May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic skin reaction

Size: px
Start display at page:

Download "May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic skin reaction"

Transcription

1 SECTION 1: Identification 1.1. Identification Product form Product name SDS0011 Date of issue: 04/12/2017 Version: 1.0 : Mixtures 1.2. Recommended use and restrictions on use Use of the substance/mixture 1.3. Supplier Manufacturer Bisco, Inc W. Irving Park Rd. Schaumburg, IL T F sales@bisco.com Emergency telephone number : : For Rx Only Emergency number : CHEMTREC - 24-Hour Hazmat Emergency Communications Center Domestic: Outside the U.S.: , collect calls accepted SECTION 2: Hazard(s) identification 2.1. Classification of the substance or mixture GHS-US classification Flammable liquids Category 2 Skin corrosion/irritation Category 2 Serious eye damage/eye irritation Category 2 Respiratory sensitization, Category 1 Skin sensitization, Category 1 H225 H315 H319 H334 H317 Full text of H statements : see section 16 Highly flammable liquid and vapor Causes skin irritation Causes serious eye irritation May cause allergy or asthma symptoms or breathing difficulties if inhaled May cause an allergic skin reaction 2.2. GHS Label elements, including precautionary statements GHS-US labeling Hazard pictograms (GHS-US) : Signal word (GHS-US) Hazard statements (GHS-US) Precautionary statements (GHS-US) : Danger GHS02 04/12/2017 EN (English US) SDS ID: SDS0011 Page 1 GHS08 : H225 - Highly flammable liquid and vapor H315 - Causes skin irritation H317 - May cause an allergic skin reaction H319 - Causes serious eye irritation H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled : P210 - Keep away from heat/sparks/open flames/hot surfaces. - No smoking P233 - Keep container tightly closed P240 - Ground/Bond container and receiving equipment P241 - Use explosion-proof ventilating equipment P242 - Use only non-sparking tools P243 - Take precautionary measures against static discharge P261 - Avoid breathing vapors P264 - Wash hands thoroughly after handling P272 - Contaminated work clothing must not be allowed out of the workplace P280 - Wear protective gloves, face protection, eye protection P284 - wear a mask P302+P352 - If on skin: Wash with plenty of water

2 2.3. Other hazards which do not result in classification 2.4. Unknown acute toxicity (GHS US) SECTION 3: Composition/Information on ingredients 3.1. Substances 3.2. Mixtures P303+P361+P353 - If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower P304+P341 - If inhaled: If breathing is difficult, remove person to fresh air and keep comfortable for breathing P305+P351+P338 - If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P321 - Specific treatment (see First aid measures on this label) P332+P313 - If skin irritation occurs: Get medical advice/attention P337+P313 - If eye irritation persists: Get medical advice/attention P342+P311 - If experiencing respiratory symptoms: Call Call a doctor, a POISON CENTER P362+P364 - Take off contaminated clothing and wash it before reuse P363 - Wash contaminated clothing before reuse P370+P378 - In case of fire: Use foam, sand to extinguish P403+P235 - Store in a well-ventilated place. Keep cool P501 - Dispose in a safe manner in accordance with local/national regulations Name Product identifier % GHS-US classification Ethanol (CAS-No.) Flam. Liq. 2, H225 Eye Irrit. 2A, H319 Bisphenol A Diglycidylmethacrylate (CAS-No.) Skin Irrit. 2, H315 Eye Irrit. 2A, H319 2-Hydroxyethyl Methacrylate (CAS-No.) Skin Irrit. 2, H315 Eye Irrit. 2A, H319 Skin Sens. 1, H317 Proprietary (CAS-No.) Proprietary 1-5 Skin Irrit. 2, H315 Eye Irrit. 2A, H319 Resp. Sens. 1, H334 MDP (CAS-No.) Acute Tox. 4 (Oral), H302 Skin Corr. 1B, H314 Aquatic Acute 3, H402 Full text of hazard classes and H-statements : see section 16 SECTION 4: First-aid measures 4.1. Description of first aid measures First-aid measures general First-aid measures after inhalation First-aid measures after skin contact First-aid measures after eye contact First-aid measures after ingestion : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice (show the label where possible). Call a poison center/doctor/physician if you feel unwell. : Remove person to fresh air and keep comfortable for breathing. Allow victim to breathe fresh air. Allow the victim to rest. If experiencing respiratory symptoms: Call a poison center or a doctor. : Rinse skin with water/shower. Remove/Take off immediately all contaminated clothing. Wash with plenty of soap and water. Wash contaminated clothing before reuse. If skin irritation occurs: Get medical advice/attention. Specific treatment (see First aid measures on this label). If skin irritation or rash occurs: If skin irritation or rash occurs: Get medical advice/attention. : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. Call a poison center/doctor/physician if you feel unwell Most important symptoms and effects (acute and delayed) Symptoms/effects after inhalation Symptoms/effects after skin contact Symptoms/effects after eye contact : May cause an allergic skin reaction. May cause allergy or asthma symptoms or breathing difficulties if inhaled. : Causes skin irritation. Irritation. May cause an allergic skin reaction. : Causes serious eye irritation. Eye irritation Immediate medical attention and special treatment, if necessary Treat symptomatically. 04/12/2017 EN (English US) SDS ID: SDS0011 2/9

3 SECTION 5: Fire-fighting measures 5.1. Suitable (and unsuitable) extinguishing media Suitable extinguishing media Unsuitable extinguishing media 5.2. Specific hazards arising from the chemical Fire hazard Explosion hazard Reactivity : Foam. Dry powder. Carbon dioxide. Water spray. Sand. : Do not use a heavy water stream. : Highly flammable liquid and vapor. : May form flammable/explosive vapor-air mixture. : Highly flammable liquid and vapor Special protective equipment and precautions for fire-fighters Firefighting instructions Protection during firefighting SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures General measures : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire-fighting water from entering environment. : Do not enter fire area without proper protective equipment, including respiratory protection. Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing. : Remove ignition sources. Use special care to avoid static electric charges. No open flames. No smoking For non-emergency personnel Emergency procedures For emergency responders Protective equipment Emergency procedures : Ventilate spillage area. Evacuate unnecessary personnel. No open flames, no sparks, and no smoking. Avoid contact with skin and eyes. Avoid breathing mist, vapors. : Do not attempt to take action without suitable protective equipment. Equip cleanup crew with proper protection. For further information refer to section 8: "Exposure controls/personal protection". : Ventilate area Environmental precautions Avoid release to the environment. Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters Methods and material for containment and cleaning up Methods for cleaning up Other information 6.4. Reference to other sections : Take up liquid spill into absorbent material. Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage. Store away from other materials. Notify authorities if product enters sewers or public waters. : Dispose of materials or solid residues at an authorized site. See Heading 8. Exposure controls and personal protection. For further information refer to section 13. SECTION 7: Handling and storage 7.1. Precautions for safe handling Additional hazards when processed Precautions for safe handling Hygiene measures : Handle empty containers with care because residual vapors are flammable. : Ensure good ventilation of the work station. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapor. No open flames. No smoking. Use only non-sparking tools. Avoid breathing mist, vapors. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground/bond container and receiving equipment. Take precautionary measures against static discharge. Flammable vapors may accumulate in the container. Use explosion-proof equipment. Wear personal protective equipment. Avoid contact with skin and eyes. : Wash hands thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Wash contaminated clothing before reuse. Do not eat, drink or smoke when using this product. Always wash hands after handling the product Conditions for safe storage, including any incompatibilities Technical measures Storage conditions Incompatible products : Ground/bond container and receiving equipment. : Keep in fireproof place. Keep container tightly closed. Store in a well-ventilated place. Keep cool. : Strong bases. Strong acids. 04/12/2017 EN (English US) SDS ID: SDS0011 3/9

4 Incompatible materials : Sources of ignition. Direct sunlight. Heat sources. SECTION 8: Exposure controls/personal protection 8.1. Control parameters ACGIH ACGIH STEL (ppm) 1000 ppm (Ethanol; USA; Short time value; TLV - Adopted Value) MDP ( ) 8.2. Appropriate engineering controls Appropriate engineering controls Environmental exposure controls : Ensure good ventilation of the work station. : Avoid release to the environment Individual protection measures/personal protective equipment Personal protective equipment: Avoid all unnecessary exposure. Hand protection: Wear protective gloves Eye protection: Chemical goggles or safety glasses. Safety glasses Skin and body protection: Wear suitable protective clothing Respiratory protection: Wear appropriate mask. Wear respiratory protection Other information: Do not eat, drink or smoke during use. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state : Liquid Appearance : Liquid. Color : Pale Yellow Odor : Ethanol odor Odor threshold ph Melting point : Freezing point Boiling point Flash point Relative evaporation rate (butyl acetate=1) 04/12/2017 EN (English US) SDS ID: SDS0011 4/9

5 Flammability (solid, gas) Vapor pressure Relative vapor density at 20 C Relative density Solubility Log Pow Auto-ignition temperature Decomposition temperature Viscosity, kinematic Viscosity, dynamic Explosion limits Explosive properties Oxidizing properties : Highly flammable liquid and vapor Other information SECTION 10: Stability and reactivity Reactivity Highly flammable liquid and vapor Chemical stability Highly flammable liquid and vapor. May form flammable/explosive vapor-air mixture Possibility of hazardous reactions Not established Conditions to avoid Direct sunlight. Extremely high or low temperatures. Open flame. Avoid contact with hot surfaces. Heat. No flames, no sparks. Eliminate all sources of ignition Incompatible materials Strong acids. Strong bases Hazardous decomposition products fume. Carbon monoxide. Carbon dioxide. May release flammable gases. SECTION 11: Toxicological information Information on toxicological effects Acute toxicity LD50 oral rat LD50 dermal rabbit ATE US (oral) mg/kg (Rat; Experimental value,rat; Experimental value) > mg/kg (Rabbit; Literature study) mg/kg body weight MDP ( ) LD50 oral rat > > 2000 mg/kg ATE US (oral) mg/kg body weight LD50 oral rat LD50 dermal rabbit ATE US (oral) LD50 oral rat LD50 dermal rat LD50 dermal rabbit LC50 inhalation rat (ppm) Skin corrosion/irritation 5564 mg/kg body weight (Rat; Experimental value) > 5000 mg/kg body weight (Rabbit; Experimental value) mg/kg body weight N/A N/A N/A N/A : Causes skin irritation. 04/12/2017 EN (English US) SDS ID: SDS0011 5/9

6 Serious eye damage/irritation Respiratory or skin sensitization Germ cell mutagenicity Carcinogenicity IARC group MDP ( ) IARC group IARC group Reproductive toxicity Specific target organ toxicity single exposure : Causes serious eye irritation. : May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic skin reaction. 1 - Carcinogenic to humans 4 - Probably not carcinogenic to humans 4 - Probably not carcinogenic to humans LOAEL (oral,rat) LOAEL (dermal,rat/rabbit) LOAEC (inhalation,rat,gas) LOAEC (inhalation,rat,vapour ) LOAEC (inhalation,rat,dust/mist/fume) Specific target organ toxicity repeated exposure N/A mg/kg body weight N/A mg/kg body weight N/A ppmv/4h N/A mg/l/4h N/A mg/l/4h LOAEL (oral,rat,90 days) LOAEL (dermal,rat/rabbit,90 days) LOAEC (inhalation,rat,gas,90 days) LOAEC (inhalation,rat,vapour,90 days) LOAEC (inhalation,rat,dust/mist/fume,90 days) Aspiration hazard Potential Adverse human health effects and symptoms Symptoms/effects after inhalation Symptoms/effects after skin contact Symptoms/effects after eye contact SECTION 12: Ecological information Toxicity Ecology - general LC50 fish 1 MDP ( ) EC50 Daphnia 1 NOEC chronic fish N/A mg/kg bodyweight/day N/A mg/kg bodyweight/day N/A ppmv/6h/day N/A mg/l/6h/day N/A mg/l/6h/day : Based on available data, the classification criteria are not met. : May cause an allergic skin reaction. May cause allergy or asthma symptoms or breathing difficulties if inhaled. : Causes skin irritation. Irritation. May cause an allergic skin reaction. : Causes serious eye irritation. Eye irritation. : The product is not considered harmful to aquatic organisms or to cause long-term adverse effects in the environment mg/l (LC50; US EPA; 96 h; Pimephales promelas; Flow-through system; Fresh water; Experimental value) > 100 mg/l 48h 10 mg/l LC50 fish mg/l (LC50; 96 h) EC50 Daphnia 1 EC50 Daphnia mg/l (NOEC; OECD 202: Daphnia sp. Acute Immobilisation Test; 48 h; Daphnia magna; Static system; Fresh water; Experimental value) 380 mg/l (EC50; OECD 202: Daphnia sp. Acute Immobilisation Test; 48 h; Daphnia magna; Static system; Fresh water; Experimental value) 04/12/2017 EN (English US) SDS ID: SDS0011 6/9

7 Threshold limit algae 1 Threshold limit algae mg/l (ErC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella subcapitata; Static system; Fresh water; Experimental value) 345 mg/l (EbC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella subcapitata; Static system; Fresh water; Experimental value) Persistence and degradability Persistence and degradability Not established. Persistence and degradability Readily biodegradable in water. Biodegradable in the soil. Highly mobile in soil. Biochemical oxygen demand (BOD) g O₂/g substance Chemical oxygen demand (COD) 1.7 g O₂/g substance ThOD 2.1 g O₂/g substance BOD (% of ThOD) 0.43 Persistence and degradability Readily biodegradable in water. Biodegradability in soil: no data available. Adsorbs into the soil. Persistence and degradability Biodegradability in water: no data available Bioaccumulative potential Bioaccumulative potential Not established. BCF fish 1 Log Pow 1 (BCF; Other; 72 h; Cyprinus carpio; Static system; Fresh water; Read-across) (Experimental value) Bioaccumulative potential Low potential for bioaccumulation (Log Kow < 4). BCF fish (BCF) Log Pow (0.42; Experimental value; OECD 107: Partition Coefficient (n-octanol/water): Shake Flask Method; 25 C) Bioaccumulative potential Low potential for bioaccumulation (BCF < 500). Log Pow Bioaccumulative potential Mobility in soil 4.94 (Estimated value) No bioaccumulation data available. Surface tension Log Koc N/m (20 C) Koc,PCKOCWIN v1.66; 1; Read-across Other adverse effects Effect on the global warming GWPmix comment Other information : No known effects from this product. : No known effects from this product. : Avoid release to the environment. SECTION 13: Disposal considerations Disposal methods Waste treatment methods Product/Packaging disposal recommendations : Dispose of contents/container in accordance with licensed collector s sorting instructions. : Dispose in a safe manner in accordance with local/national regulations. Dispose in a safe manner in accordance with local/national regulations. 04/12/2017 EN (English US) SDS ID: SDS0011 7/9

8 Additional information Ecology - waste materials : Handle empty containers with care because residual vapors are flammable. Flammable vapors may accumulate in the container. : Avoid release to the environment. SECTION 14: Transport information Department of Transportation (DOT) In accordance with DOT Transport document description : UN1170 Ethyl alcohol, 3, III UN-No.(DOT) : UN1170 Proper Shipping Name (DOT) : Ethyl alcohol Class (DOT) : 3 - Class 3 - Flammable and combustible liquid 49 CFR Packing group (DOT) : III - Minor Danger Hazard labels (DOT) : 3 - Flammable liquid DOT Packaging Non Bulk (49 CFR 173.xxx) : 203 DOT Packaging Bulk (49 CFR 173.xxx) : 242 DOT Special Provisions (49 CFR ) DOT Packaging Exceptions (49 CFR 173.xxx) : 4b;150 DOT Quantity Limitations Passenger aircraft/rail (49 CFR ) DOT Quantity Limitations Cargo aircraft only (49 CFR ) DOT Vessel Stowage Location Other information Transportation of Dangerous Goods Transport by sea : 24 - Alcoholic beverages containing more than 70 percent alcohol by volume must be transported as materials in Packing Group II. Alcoholic beverages containing more than 24 percent but not more than 70 percent alcohol by volume must be transported as materials in Packing Group III. B1 - If the material has a flash point at or above 38 C (100 F) and below 93 C (200 F), then the bulk packaging requirements of of this subchapter are applicable. If the material has a flash point of less than 38 C (100 F), then the bulk packaging requirements of of this subchapter are applicable. IB3 - Authorized IBCs: Metal (31A, 31B and 31N); Rigid plastics (31H1 and 31H2); Composite (31HZ1 and 31HA2, 31HB2, 31HN2, 31HD2 and 31HH2). Additional Requirement: Only liquids with a vapor pressure less than or equal to 110 kpa at 50 C (1.1 bar at 122 F), or 130 kpa at 55 C (1.3 bar at 131 F) are authorized, except for UN2672 (also see Special Provision IP8 in Table 2 for UN2672). T (d)(2) Normal (d)(3) TP1 - The maximum degree of filling must not exceed the degree of filling determined by the following: Degree of filling = 97 / 1 + a (tr - tf) Where: tr is the maximum mean bulk temperature during transport, and tf is the temperature in degrees celsius of the liquid during filling. : 60 L : 220 L : A - The material may be stowed on deck or under deck on a cargo vessel and on a passenger vessel. : No supplementary information available. Transport document description (IMDG) : UN 1170, 3 UN-No. (IMDG) : 1170 Class (IMDG) : 3 - Flammable liquids Air transport Transport document description (IATA) : UN 1170, 3 UN-No. (IATA) : /12/2017 EN (English US) SDS ID: SDS0011 8/9

9 Class (IATA) SECTION 15: Regulatory information US Federal regulations : 3 - Flammable Liquids Listed on the United States TSCA (Toxic Substances Control Act) inventory Listed on the United States TSCA (Toxic Substances Control Act) inventory International regulations CANADA Listed on the Canadian DSL (Domestic Substances List) EU-Regulations National regulations US State regulations SECTION 16: Other information Revision date : 04/12/2017 Other information Full text of H-phrases: H225 H302 H314 H315 H317 H319 H334 H402 : None. Highly flammable liquid and vapor Harmful if swallowed Causes severe skin burns and eye damage Causes skin irritation May cause an allergic skin reaction Causes serious eye irritation May cause allergy or asthma symptoms or breathing difficulties if inhaled Harmful to aquatic life SDS US (GHS HazCom 2012) This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as guaranteeing any specific property of the product 04/12/2017 EN (English US) SDS ID: SDS0011 9/9

: Duo-Link Universal Base

: Duo-Link Universal Base SECTION 1: Identification 1.1. Identification Product form Product name Duo-Link Universal Base Date of issue: 03/02/2018 Version: 2.0 : Mixture 1.2. Recommended use and restrictions on use Use of the

More information

: Aelite Aesthetic Enamel

: Aelite Aesthetic Enamel SECTION 1: Identification 1.1. Identification Product form Product name Aelite Aesthetic Enamel Date of issue: 01/19/2018 Version: 1.0 : Mixture 1.2. Recommended use and restrictions on use Use of the

More information

: One-Step. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use

: One-Step. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use SECTION 1: Identification 1.1. Identification Product form Product name One-Step Date of issue: 01/02/2018 Version: 3.0 : Mixture : One-Step 1.2. Recommended use and restrictions on use Use of the substance/mixture

More information

SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use

SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use SECTION 1: Identification 1.1. Identification Product form Product name Band Lok (with and without Fluoride) Part A Date of issue: 3/5/2018 Version: 9 : Mixture 1.2. Recommended use and restrictions on

More information

: Reveal HD Bulk. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use

: Reveal HD Bulk. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use SECTION 1: Identification 1.1. Identification Product form Product name Reveal HD Bulk Date of issue: 12/07/2017 Version: 1.0 : Mixture 1.2. Recommended use and restrictions on use Use of the substance/mixture

More information

: Duo-Link Base. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use

: Duo-Link Base. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use SECTION 1: Identification 1.1. Identification Product form Product name Duo-Link Base Date of issue: 01/03/2018 Version: 2.0 : Mixture 1.2. Recommended use and restrictions on use Use of the substance/mixture

More information

: One-Step Plus. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use

: One-Step Plus. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use SECTION 1: Identification 1.1. Identification Product form Product name One-Step Plus Date of issue: 01/02/2018 Version: 2.0 : Mixture 1.2. Recommended use and restrictions on use Use of the substance/mixture

More information

: TheraCal LC. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use

: TheraCal LC. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use SECTION 1: Identification 1.1. Identification Product form Product name TheraCal LC Date of issue: 01/19/2018 Version: 3.0 : Mixture 1.2. Recommended use and restrictions on use Use of the substance/mixture

More information

SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use

SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use SECTION 1: Identification 1.1. Identification Product form Product name : Mixture : GoTo 1.2. Recommended use and restrictions on use Use of the substance/mixture 1.3. Supplier : For Rx Only Manufacturer

More information

SECTION 1: Identification. SECTION 2: Hazard(s) identification. SECTION 3: Composition/Information on ingredients. 1.1.

SECTION 1: Identification. SECTION 2: Hazard(s) identification. SECTION 3: Composition/Information on ingredients. 1.1. Date of issue: 1/17/2018 Version: 8 SECTION 1: Identification 1.1. Identification Product form Product name : Mixture : O.V.S. (Ortho Veneer System) Pastes 1.2. Recommended use and restrictions on use

More information

: ALL-BOND SE/ACE ALL-BOND SE PART II

: ALL-BOND SE/ACE ALL-BOND SE PART II ALL-BOND SE/ACE ALL-BOND SE PART II Date of issue: 11/21/2014 Revision date: 05/28/2015 Version: 1.2 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier

More information

: ALL-BOND SE LINER. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use

: ALL-BOND SE LINER. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use SECTION 1: Identification 1.1. Identification Product form Product name ALL-BOND SE LINER Date of issue: 08/28/2017 Version: 1.0 : Mixture 1.2. Recommended use and restrictions on use Use of the substance/mixture

More information

: CHEMTREC - 24-Hour Hazmat Emergency Communications Center Domestic: Outside the U.S.: , collect calls accepted

: CHEMTREC - 24-Hour Hazmat Emergency Communications Center Domestic: Outside the U.S.: , collect calls accepted SECTION 1: Identification 1.1. Identification Product form Product name Ultra Band Lok Date of issue: 03/07/2017 Version: 10 : Mixture 1.2. Recommended use and restrictions on use Use of the substance/mixture

More information

: Phase II Paste B. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use

: Phase II Paste B. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use SECTION 1: Identification 1.1. Identification Product form Product name Phase II Paste B Date of issue: 3/21/2018 Version: 9 : Mixture 1.2. Recommended use and restrictions on use Use of the substance/mixture

More information

: Aeliteflo. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification

: Aeliteflo. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification Date of issue: 12/03/2014 Revision date: 02/19/2015 Version: 1.1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name : Mixture

More information

: Resinomer Catalyst. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification

: Resinomer Catalyst. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification Date of issue: 11/25/2014 Revision date: 03/06/2015 Version: 1.1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name : Mixture

More information

: D/E Resin. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use

: D/E Resin. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use SECTION 1: Identification 1.1. Identification Product form Product name Date of issue: 07/17/2017 Version: 2.0 : Mixture 1.2. Recommended use and restrictions on use Use of the substance/mixture 1.3. Supplier

More information

: ALL-BOND 2 PRIMER B

: ALL-BOND 2 PRIMER B Date of issue: 11/21/2014 Revision date: 04/09/2015 Version: 1.1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name : Mixture

More information

: Bis-Core Base. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification

: Bis-Core Base. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification Date of issue: 12/03/2014 Revision date: 02/06/2015 Version: 1.1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name : Mixture

More information

: BisCem Catalyst. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use

: BisCem Catalyst. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use SECTION 1: Identification 1.1. Identification Product form Product name BisCem Catalyst Date of issue:01/17/2018 Version: 3.0 : Mixture 1.2. Recommended use and restrictions on use Use of the substance/mixture

More information

TheraCem Base SECTION 1: Identification 1.2. Relevant identified uses of the substance or mixture and uses advised against

TheraCem Base SECTION 1: Identification 1.2. Relevant identified uses of the substance or mixture and uses advised against SECTION 1: Identification 1.1. Identification Product form Product name TheraCem Base Date of issue: 01/20/2017 Version: 2 : Mixture : TheraCem Base 1.2. Relevant identified uses of the substance or mixture

More information

SECTION 1: Identification. SECTION 2: Hazard(s) identification. SECTION 3: Composition/Information on ingredients. 1.1.

SECTION 1: Identification. SECTION 2: Hazard(s) identification. SECTION 3: Composition/Information on ingredients. 1.1. SECTION 1: Identification 1.1. Identification Product form Product name Light Cure Retainer (LCR) Date of issue: 10/19/2016 Version: 8 : Mixture : Light-Cured Retainer 1.2. Relevant identified uses of

More information

SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification

SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification Date of issue: 12/03/2014 Revision date: 02/19/2015 Version: 1.1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form: Mixture Product

More information

SECTION 1: Identification. SECTION 2: Hazard(s) identification. SECTION 3: Composition/Information on ingredients. 1.1.

SECTION 1: Identification. SECTION 2: Hazard(s) identification. SECTION 3: Composition/Information on ingredients. 1.1. SECTION 1: Identification 1.1. Identification Product name RelyA Bond Primer with and without Fluoride Date of issue: 10/18/2016 Version 8 : RELY A PRIMER (with & without Fluoride) 1.2. Relevant identified

More information

: Core-Flo DC/Core-Flo DC Lite Base

: Core-Flo DC/Core-Flo DC Lite Base SECTION 1: Identification 1.1. Identification Product form Product name Core-Flo DC/Core-Flo DC Lite Base Date of issue: 01/27/2017 Version: 2 : Mixture 1.2. Recommended use and restrictions on use Use

More information

: Pre-Bond. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use

: Pre-Bond. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use SECTION 1: Identification 1.1. Identification Product form Product name Date of issue: 07/17/2017 Version: 2.0 : Mixture : 1.2. Recommended use and restrictions on use Use of the substance/mixture 1.3.

More information

OIL, CINNAMON STICKS*

OIL, CINNAMON STICKS* Date of issue: 08/28/2017 Revision date: 08/28/2017 Version: 1.0 SECTION 1: Identification 1.1. Identification Product form Product name : Mixture : OIL, CINNAMON STICKS* 1.2. Recommended use and restrictions

More information

SECTION 1: Identification. SECTION 2: Hazard(s) identification. SECTION 3: Composition/Information on ingredients. 1.1.

SECTION 1: Identification. SECTION 2: Hazard(s) identification. SECTION 3: Composition/Information on ingredients. 1.1. SECTION 1: Identification 1.1. Identification Product form Mighty Bowl 64 Date of issue: 03/09/2017 Revision date: 03/21/2017 Supersedes: 03/21/2017 Version: 2.0 : Mixtures Trade name : Mighty Bowl 64

More information

: All-Bond SE / ACE All-Bond SE Part II

: All-Bond SE / ACE All-Bond SE Part II SECTION 1: Identification 1.1. Identification Product form Product name All-Bond SE / ACE All-Bond SE Part II Date of issue: 02/14/2018 Version: 2.0 : Mixture 1.2. Recommended use and restrictions on use

More information

: Assure Paste. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification

: Assure Paste. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification Date of issue: 5/20/2015 Version: 7 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Assure Paste 1.2. Relevant identified uses of

More information

SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification

SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification SECTION 1: Identification 1.1. Identification Product form Polyethylene glycol diacrylate (PEGDA 200) Date of issue: 06/07/2018 Version: 1.0 : Substance Substance name : Polyethylene glycol diacrylate

More information

: Excel Fast Part A. May cause an allergic skin reaction. H317 - May cause an allergic skin reaction H320 - Causes eye irritation

: Excel Fast Part A. May cause an allergic skin reaction. H317 - May cause an allergic skin reaction H320 - Causes eye irritation SECTION 1: Identification 1.1. Identification Product form Product name Excel Fast Part A Date of issue: 2/6/2018 Version: 1 : Mixture 1.2. Recommended use and restrictions on use Use of the substance/mixture

More information

: Bonide Fruit Tree and Plant Guard Concentrate

: Bonide Fruit Tree and Plant Guard Concentrate SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name Product code : 4488 : Bonide Fruit Tree and Plant Guard Concentrate 1.2. Relevant

More information

Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : PHT Entry : M77725 Other means of identification

More information

Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : PHT Ad-Sorb RST : M77435 1.2. Relevant identified

More information

: Resinomer Base. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification

: Resinomer Base. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification Date of issue: 11/25/2014 Revision date: 03/06/2015 Version: 1.1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name : Mixture

More information

: Sulfosalicylic Acid, 20% w/v

: Sulfosalicylic Acid, 20% w/v SECTION 1: Identification 1.1. Identification Product form Product name Product code Date of issue: 08/21/2014 Revision date: 05/03/2018 Supersedes: 08/21/2014 Version: 1.1 : Mixtures : : LC25545 1.2.

More information

: Nature s Defense Water-Based Fly Repellent Spray

: Nature s Defense Water-Based Fly Repellent Spray SECTION 1: Identification 1.1. Identification Product form Trade name Nature s Defense Water-Based Fly Repellent Spray Date of issue: 09/19/2017 Version: 1.0 : Mixture Synonyms : 12012 1.2. Recommended

More information

Rapture Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

Rapture Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations SECTION 1: Identification 1.1. Identification Product form : Mixture Product name : Rapture 4-0-4 Product code : M77612 1.2. Recommended use and restrictions on use 1.3. Supplier JR Simplot Company P.O.

More information

1875-A Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Date of issue: 04/30/2017

1875-A Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Date of issue: 04/30/2017 SECTION 1: Identification 1.1. Identification Product form Date of issue: 04/30/2017 : Mixture Product name : Product code : Other means of identification 1.2. Recommended use and restrictions on use 1.3.

More information

H320 - Causes eye irritation H335 - May cause respiratory irritation

H320 - Causes eye irritation H335 - May cause respiratory irritation Oolitic Aragonite (Calcium Carbonate) Date of issue: 04/05/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking Product form : Substance Substance name :

More information

: Juniper Wood & Lavender

: Juniper Wood & Lavender SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Product name : Juniper Wood & Lavender Product code : 1.2. Relevant identified

More information

: Iodine, Lugol's, 5% w/v

: Iodine, Lugol's, 5% w/v SECTION 1: Identification 1.1. Identification Product form Product name Product code Date of issue: 12/16/2013 Revision date: 11/01/2017 Supersedes: 11/01/2017 Version: 1.2 : Mixtures : : LC15675 1.2.

More information

: Sweat Controls for Cystic Fibrosis Testing

: Sweat Controls for Cystic Fibrosis Testing SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : Sweat Controls for Cystic Fibrosis Testing : SS-150 1.2. Relevant identified uses of the substance or mixture

More information

Babassu Oil Safety Data Sheet

Babassu Oil Safety Data Sheet Babassu Oil Safety Data Sheet SECTION 1: Identification of the substance/mixture and of the company/undertaking Product name: Babassu Oil Product code: 301-482X Supplier: Majestic Mountain Sage Inc 2490

More information

S-Scents Cinnamon Crisp Safety Data Sheet

S-Scents Cinnamon Crisp Safety Data Sheet SECTION 1: Product and company identification Product name : S-Scents Cinnamon Crisp Use of the substance/mixture : Odorant Product code : 018401 Company : Share Corporation P.O. Box 245013 Milwaukee,

More information

: Benzocaine Ointment

: Benzocaine Ointment SECTION 1: Identification 1.1. Product identifier Benzocaine Ointment Revision date: 10/07/2014 Date of issue: 10/07/2014 Version: 1.0 Product form : Mixture Product name : Benzocaine Ointment 1.2. Relevant

More information

: 805 BIG GAP FILLER PU FOAM

: 805 BIG GAP FILLER PU FOAM SECTION 1: Identification 1.1. Identification Product form Trade name : Mixture Product code : 805 : 1.2. Relevant identified uses of the substance or mixture and uses advised against 1.3. Details of the

More information

SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification

SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Trade name : Product code : 1.2. Relevant identified uses of the substance

More information

: ORANGE CITRUS TCELL

: ORANGE CITRUS TCELL Date of issue: 03/20/2015 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name Product code : 425680 SKU # : 2024260 : ORANGE

More information

: Esomeprazole Sodium for Injection

: Esomeprazole Sodium for Injection SECTION 1: Identification 1.1. Identification Product name Other means of identification : Esomeprazole Sodium for Injection : NDC 55150-184-05 (20 mg) NDC 55150-185-05 (40 mg) 1.2. Relevant identified

More information

: Pro 1 Oil Supplement

: Pro 1 Oil Supplement Date of issue: 03/18/2016 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name : Mixture Product code : 93400

More information

: Sodium 9,10-dihydro-3,4-dihydroxy-9,10-dioxoanthracene-2-sulfonate monohydrate

: Sodium 9,10-dihydro-3,4-dihydroxy-9,10-dioxoanthracene-2-sulfonate monohydrate SECTION 1: Identification 1.1. Identification Product form Substance name Chemical name Alizarin Red S Date of issue: 10/05/2004 Revision date: 09/27/2016 Supersedes: 06/20/2013 Version: 1.1 : Substance

More information

: Sulfanilamide. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification

: Sulfanilamide. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification Date of issue: 12/12/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Substance Substance name : Sulfanilamide

More information

: Tea Leaf & Jasmine

: Tea Leaf & Jasmine Date of issue: 04/23/2015 Revision date: 06/27/2017 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Trade name Product

More information

: Messy Pet Allergen Blocker

: Messy Pet Allergen Blocker Date of issue: 07/04/2017 Revision date: 07/04/2017 Version: 1.0 SECTION 1: Identification 1.1. Identification Product form Product name : Mixture : Messy Pet Allergen Blocker 1.2. Recommended use and

More information

: 10% Neutral Buffered Formalin with Eosin

: 10% Neutral Buffered Formalin with Eosin Version: 1.0 SECTION 1: Identification 1.1. Identification Trade name Product code : : 3800650E 1.2. Recommended use and restrictions on use Recommended use Restrictions on use 1.3. Supplier : Preservation

More information

SECTION 1: IDENTIFICATION 1.1. Product Identifier

SECTION 1: IDENTIFICATION 1.1. Product Identifier SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Mixture Product Name: 1.2. Intended Use of the Product Use of the Substance/Mixture: Waterproofing. 1.3. Name, Address, and Telephone of

More information

: Whitecap Contractor Strength

: Whitecap Contractor Strength SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Whitecap Contractor Strength 1.2. Relevant identified uses of the substance or mixture

More information

Provectus Aerobic Bioremediation Reagent Safety Data Sheet

Provectus Aerobic Bioremediation Reagent Safety Data Sheet Provectus Aerobic Bioremediation Reagent SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Substance name CAS No Formula Provect-ABR

More information

: Bonide Captan 50% Wettable Powder

: Bonide Captan 50% Wettable Powder SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name Product code : 4459 : 1.2. Relevant identified uses of the substance or mixture and

More information

Triple Threat Safety Data Sheet

Triple Threat Safety Data Sheet SECTION 1: Product and company identification Product name : Triple Threat Use of the substance/mixture : Herbicide Product code : 0363 Company : Total Solutions P.O. Box 240014 Milwaukee, WI 53224 - USA

More information

: FLUVASTATIN SODIUM CRS

: FLUVASTATIN SODIUM CRS in accordance with Regulation (EC) No. 1907/2006, as amended. Date of issue: 27/06/2013 Revision date: 27/06/2013 Supersedes: 27/11/2009 Version: 3.0 SECTION 1: Identification of the substance/mixture

More information

Air care products For professional use only

Air care products For professional use only Date of issue: 03/20/2015 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : CITRUS TCELL Product code : 289141 SKU #

More information

: BENZYL ALCOHOL CRS

: BENZYL ALCOHOL CRS in accordance with Regulation (EC) No. 1907/2006, as amended. Date of issue: 27/06/2013 Revision date: 27/06/2013 Supersedes: 04/02/2010 Version: 5.0 SECTION 1: Identification of the substance/mixture

More information

SASE SFS SPR3. Safety Data Sheet. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification

SASE SFS SPR3. Safety Data Sheet. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification SASE SASE SFS SPR3 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name. : SASE SFS SPR3 1.2. Relevant identified uses of the substance

More information

: Ammonium Acetate. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification. CAS-No. :

: Ammonium Acetate. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification. CAS-No. : SECTION 1: Identification 1.1. Identification Product form Substance name Ammonium Acetate Date of issue: 10/03/2007 Revision date: 05/04/2018 Supersedes: 11/01/2016 Version: 1.2 : Substance : Ammonium

More information

: ISOPON WINDSCREEN RESIN (WSR-R-AU)

: ISOPON WINDSCREEN RESIN (WSR-R-AU) Date of issue:12/04/2017 Revision date: : Version: 1.0 SECTION 1: Identification : Product identifier and chemical identity Product name : ISOPON WINDSCREEN RESIN (WSR-R-AU) Other means of identification

More information

SAFETY DATA SHEET SECTION 1 - IDENTIFICATION

SAFETY DATA SHEET SECTION 1 - IDENTIFICATION SAFETY DATA SHEET SECTION 1 - IDENTIFICATION Product Identifier: RP-OCNF LIFT STATION DEGREASER Recommended Use: RED SOLVENT LIFT STATION DEGREASER Restrictions on Use: INDUSTRIAL OR PROFESSIONAL USE ONLY

More information

: Elequil aromatabs Lavender - Sandalwood

: Elequil aromatabs Lavender - Sandalwood SECTION 1: Identification 1.1. Identification Product form Trade name Product code 1.2. Recommended use and restrictions on use Use of the substance/mixture 1.3. Supplier Beekley Corporation 1 Prestige

More information

: PANTOPRAZOLE SODIUM SESQUIHYDRATE CRS

: PANTOPRAZOLE SODIUM SESQUIHYDRATE CRS in accordance with Regulation (EC) No. 1907/2006, as amended. Date of issue: 27/06/2013 Revision date: 27/06/2013 Supersedes: 25/11/2009 Version: 6.0 SECTION 1: Identification of the substance/mixture

More information

SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification

SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification Date of issue06/08/2015 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Trade name : Product code : 18340F 1.2. Relevant

More information

SECTION 1: IDENTIFICATION

SECTION 1: IDENTIFICATION According To Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules And Regulations Revision Date: 12/16/2015 Date of issue: 12/16/2015 Version: 1.0 SECTION 1: IDENTIFICATION 1.1. Product

More information

3.1. Substances Not applicable 3.2. Mixtures Name Product identifier % 1,3,4-Thiadiazole, 2,5-bis(octyldithio)- (CAS-No.)

3.1. Substances Not applicable 3.2. Mixtures Name Product identifier % 1,3,4-Thiadiazole, 2,5-bis(octyldithio)- (CAS-No.) SECTION 1: Identification 1.1. Identification Product name : According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations (HPR) WHMIS 2015 Date of

More information

SAFETY DATA SHEET SECTION 1 - IDENTIFICATION

SAFETY DATA SHEET SECTION 1 - IDENTIFICATION SAFETY DATA SHEET SECTION 1 - IDENTIFICATION Product Identifier: AGRI-FOAM Recommended Use: AGRICULTURAL MARKING FOAM Restrictions on Use: INDUSTRIAL OR PROFESSIONAL USE ONLY Supplier: SHARE CANADA Address:

More information

: Meropenem for Injection

: Meropenem for Injection SECTION 1: Identification 1.1. Identification Product name : Meropenem for Injection Other means of identification : NDC CODE: 55150-207-20, 55150-208-30 (for 500 mg, 1g) 1.2. Relevant identified uses

More information

SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification

SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Trade name : Mango Mojito Product code : 1.2. Relevant identified uses of

More information

: Cobalt Nitrate, 8% w/v

: Cobalt Nitrate, 8% w/v SECTION 1: Identification 1.1. Identification Product form Product name Product code Date of issue: 12/11/2014 Revision date: 04/05/2017 Supersedes: 12/11/2014 Version: 1.1 : Mixtures : : LC13220 1.2.

More information

Derma+Flex QS Adhesive Safety Data Sheet

Derma+Flex QS Adhesive Safety Data Sheet SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name :Derma+Flex QS high viscoscity tissue adhesive 1.2. Relevant identified uses of the

More information

: Protease (Subtilisin A from Bacillus licheniformis) Powder

: Protease (Subtilisin A from Bacillus licheniformis) Powder Protease (Subtilisin A from Bacillus licheniformis) Powder Date of issue: 25/02/2014 Revision date: 20/09/2017 Supersedes: 12/01/2017 Version: 1.3 SECTION 1: Identification of the substance/mixture and

More information

: FORMALDEHYDE, 16% SOLUTION, METHANOL FREE

: FORMALDEHYDE, 16% SOLUTION, METHANOL FREE FORMALDEHYDE, 16% SOLUTION, METHANOL FREE Revision date: 02/25/2015 Version: 1.1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Trade

More information

Manufacturer EXXON MOBIL CORPORATION Springwoods Village Parkway Spring, TX USA

Manufacturer EXXON MOBIL CORPORATION Springwoods Village Parkway Spring, TX USA Revision Date: 05/01/2015 Date of issue: 05/01/2015 Version: 1.0 SECTION 1: IDENTIFICATION Product Identifier Product Form: Mixture Product Name: #67 Grease Intended Use of the Product Lubricant Name,

More information

Ar-Chem Ag Agri-Best Foam Marker Safety Data Sheet

Ar-Chem Ag Agri-Best Foam Marker Safety Data Sheet SECTION 1: Product and company identification Product name : Ar-Chem Ag Agri-Best Foam Marker Use of the substance/mixture : Foam Marker Concentrate Product code : Ar-Chem Ag Agri-Best Foam Marker Company

More information

: SALBUTAMOL SULFATE CRS

: SALBUTAMOL SULFATE CRS Date of issue: 27/06/2013 Revision date: 27/06/2013 Supersedes: 04/02/2010 Version: 6.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product

More information

Safety Data Sheet Lugol s Iodine, Concentrate Revision Date: 02/06/18

Safety Data Sheet Lugol s Iodine, Concentrate Revision Date: 02/06/18 Safety Data Sheet Lugol s Iodine, Concentrate Revision Date: 02/06/18 1. PRODUCT AND COMPANY IDENTIFICATION 1.1 Product Identifier Trade name: Lugol s Iodine Concentrate Product code(s): 400353, 400354,

More information

Selective Herbicide #3 Broadleaf Weed Killer Safety Data Sheet

Selective Herbicide #3 Broadleaf Weed Killer Safety Data Sheet SECTION 1: Product and company identification Product name : Use of the substance/mixture : Herbicide Product code : 0360 Company : Athea Laboratories, Inc. P.O. Box 240014 Milwaukee, WI 53224 - USA T

More information

: ProSpec Moisture Guard Max Part A

: ProSpec Moisture Guard Max Part A Date of issue: 07/04/2013 Revision date: 07/04/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Substance name :

More information

: EDTA, Disodium, Dihydrate

: EDTA, Disodium, Dihydrate SECTION 1: Identification 1.1. Identification Product form Substance name EDTA, Disodium, Dihydrate Date of issue: 10/29/2004 Revision date: 03/23/2017 Supersedes: 09/05/2013 Version: 1.1 : Substance CAS

More information

SANITISER & DEGREASER

SANITISER & DEGREASER Date of issue: 28/06/2017 Revision date: 12/05/2016 : Version: 10.1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product

More information

: Ampicillin for Injection

: Ampicillin for Injection SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name Other means of identification : Ampicillin for Injection : NDC: 55150-111-10, 55150-112-10,

More information

: UV NV. Safety Data Sheet. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification

: UV NV. Safety Data Sheet. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification Revision date: 2/20/2013 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name. : Mixture : UV NV 1.2. Relevant identified

More information

Pine Odor Disinfectant Safety Data Sheet

Pine Odor Disinfectant Safety Data Sheet SECTION 1: Product and company identification Product name : Pine Odor Disinfectant Use of the substance/mixture : Disinfectant Product code : 155401 Company : Share Corporation P.O. Box 245013 Milwaukee,

More information

SECTION 1: Identification. SECTION 2: Hazard identification. SECTION 3: Composition/information on ingredients. SECTION 4: First aid measures

SECTION 1: Identification. SECTION 2: Hazard identification. SECTION 3: Composition/information on ingredients. SECTION 4: First aid measures SECTION 1: Identification 1.1. Identification Product name : ILSCO X-1000 ILSCO X-1000 DE-OX According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations

More information

SECTION 1: Identification of the substance/mixture and of the company/undertaking

SECTION 1: Identification of the substance/mixture and of the company/undertaking Date of issue: 10/05/2004 Revision date: 06/20/2013 Supersedes: 10/06/2004 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product

More information

SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification Product identifier

SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification Product identifier Date of issue: 10/17/2014 Revision date: 10/20/2014 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Trade name : Product

More information

: CHEMTREC - 24-Hour Hazmat Emergency Communications Center Domestic: Outside the U.S.: , collect calls accepted GHS07

: CHEMTREC - 24-Hour Hazmat Emergency Communications Center Domestic: Outside the U.S.: , collect calls accepted GHS07 Date of issue: 20/11/2014 Revision date: 06/03/2015 : Version: 1.1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Product

More information

SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture GHS-US Classification Skin Irrit. 2 Eye Irrit.

SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture GHS-US Classification Skin Irrit. 2 Eye Irrit. According To Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules And Regulations Revision Date: 06/13/2016 Date of Issue: 06/13/2016 Version: 1.0 SECTION 1: IDENTIFICATION 1.1. Product

More information

: Proteinase K (Molecular Biology Grade)

: Proteinase K (Molecular Biology Grade) Date of issue: 11/07/2018 Revision date: 11/07/2018 Version: 1.3 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product

More information

: Attraction Purely Pink

: Attraction Purely Pink Date of issue: 23/07/2008 Revision date: 06/12/2018 Supersedes: 03/02/2009 Version: 3.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product

More information