: D/E Resin. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use
|
|
- Sharlene Sharp
- 5 years ago
- Views:
Transcription
1 SECTION 1: Identification 1.1. Identification Product form Product name Date of issue: 07/17/2017 Version: 2.0 : Mixture 1.2. Recommended use and restrictions on use Use of the substance/mixture 1.3. Supplier Manufacturer Bisco, Inc W. Irving Park Rd. Schaumburg, IL T F sales@bisco.com - : : For RX only 1.4. Emergency telephone number Emergency number : CHEMTREC - 24-Hour Hazmat Emergency Communications Center Domestic: Outside the U.S.: , collect calls accepted SECTION 2: Hazard(s) identification 2.1. Classification of the substance or mixture GHS-US classification Flammable liquids Category 4 Skin corrosion/irritation Category 2 Serious eye damage/eye irritation Category 2A Respiratory sensitization, Category 1 Skin sensitization, Category 1 H227 H315 H319 H334 H317 Full text of H statements : see section 16 Combustible liquid Causes skin irritation Causes serious eye irritation May cause allergy or asthma symptoms or breathing difficulties if inhaled May cause an allergic skin reaction 2.2. GHS Label elements, including precautionary statements GHS-US labeling Hazard pictograms (GHS-US) : Signal word (GHS-US) Hazard statements (GHS-US) Precautionary statements (GHS-US) : Danger : H227 - Combustible liquid H315 - Causes skin irritation H317 - May cause an allergic skin reaction H319 - Causes serious eye irritation H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled : P210 - Keep away from heat/sparks/open flames/hot surfaces. - No smoking P261 - Avoid breathing vapors P264 - Wash hands thoroughly after handling P272 - Contaminated work clothing must not be allowed out of the workplace P280 - Wear eye protection, face protection, protective gloves P284 - Wear a mask P302+P352 - If on skin: Wash with plenty of Wash with soap water P304+P341 - If inhaled: If breathing is difficult, remove person to fresh air and keep comfortable for breathing P305+P351+P338 - If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P321 - Specific treatment (see First aid measures on this label) P332+P313 - If skin irritation occurs: Get medical advice/attention P337+P313 - If eye irritation persists: Get medical advice/attention 06/20/2017 EN (English US) Page 1
2 2.3. Other hazards which do not result in classification 2.4. Unknown acute toxicity (GHS US) SECTION 3: Composition/Information on ingredients 3.1. Substances 3.2. Mixtures P342+P311 - If experiencing respiratory symptoms: Call a POISON CENTER, Call a doctor P362+P364 - Take off contaminated clothing and wash it before reuse P363 - Wash contaminated clothing before reuse P370+P378 - In case of fire: Use carbon dioxide (CO2), foam, nitrogen, sand, dry sand to extinguish P403+P235 - Store in a well-ventilated place. Keep cool P501 - Dispose in a safe manner in accordance with local/national regulations Name Product identifier % GHS-US classification Bisphenol A Diglycidylmethacrylate (CAS No) Skin Irrit. 2, H315 Eye Irrit. 2A, H319 2-Hydroxyethyl Methacrylate (CAS No) Skin Irrit. 2, H315 Eye Irrit. 2A, H319 Skin Sens. 1, H317 Urethane Dimethacrylate (CAS No) Skin Irrit. 2, H315 Resp. Sens. 1, H334 Triethylene Glycol Dimethacrylate (CAS No) Skin Irrit. 2, H315 Eye Irrit. 2A, H319 Resp. Sens. 1, H334 Skin Sens. 1, H317 2,2 -[(4-Methylphenyl)Imino]Bisethanol (CAS No) < 1 Acute Tox. 4 (Oral), H302 Skin Irrit. 2, H315 Eye Irrit. 2A, H319 Resp. Sens. 1, H334 Full text of hazard classes and H-statements : see section 16 SECTION 4: First-aid measures 4.1. Description of first aid measures First-aid measures general First-aid measures after inhalation First-aid measures after skin contact First-aid measures after eye contact First-aid measures after ingestion : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice (show the label where possible). Call a poison center/doctor/physician if you feel unwell. : Remove person to fresh air and keep comfortable for breathing. Allow victim to breathe fresh air. Allow the victim to rest. If experiencing respiratory symptoms: Call a poison center or a doctor. : Wash with plenty of soap and water. Wash contaminated clothing before reuse. If skin irritation occurs: Get medical advice/attention. Specific treatment (see First aid measures on this label). If skin irritation or rash occurs: Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash occurs: Get medical advice/attention. : If eye irritation persists: Get medical advice/attention. Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. Call a poison center/doctor/physician if you feel unwell Most important symptoms and effects (acute and delayed) Potential Adverse human health effects and symptoms Symptoms/effects after inhalation Symptoms/effects after skin contact Symptoms/effects after eye contact : Based on available data, the classification criteria are not met. : May cause an allergic skin reaction. May cause allergy or asthma symptoms or breathing difficulties if inhaled. : Causes skin irritation. Irritation. May cause an allergic skin reaction. : Causes serious eye irritation. Eye irritation Immediate medical attention and special treatment, if necessary Treat symptomatically. 06/20/2017 EN (English US) 2/8
3 SECTION 5: Fire-fighting measures 5.1. Suitable (and unsuitable) extinguishing media Suitable extinguishing media Unsuitable extinguishing media 5.2. Specific hazards arising from the chemical Fire hazard Reactivity : Sand. Water spray. Dry powder. Foam. Carbon dioxide. : Do not use a heavy water stream. : Combustible liquid Special protective equipment and precautions for fire-fighters Firefighting instructions Protection during firefighting SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures : The product is non-reactive under normal conditions of use, storage and transport. : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire-fighting water from entering environment. : Do not enter fire area without proper protective equipment, including respiratory protection. Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing For non-emergency personnel Emergency procedures For emergency responders Protective equipment Emergency procedures : Ventilate spillage area. Evacuate unnecessary personnel. No open flames, no sparks, and no smoking. Avoid contact with skin and eyes. Avoid breathing mist, vapors. : Do not attempt to take action without suitable protective equipment. Equip cleanup crew with proper protection. For further information refer to section 8: "Exposure controls/personal protection". : Ventilate area Environmental precautions Avoid release to the environment. Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters Methods and material for containment and cleaning up Methods for cleaning up Other information 6.4. Reference to other sections : Take up liquid spill into absorbent material. Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage. Store away from other materials. Notify authorities if product enters sewers or public waters. : Dispose of materials or solid residues at an authorized site. See Heading 8. Exposure controls and personal protection. For further information refer to section 13. SECTION 7: Handling and storage 7.1. Precautions for safe handling Precautions for safe handling Hygiene measures : Ensure good ventilation of the work station. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapor. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Wear personal protective equipment. Avoid contact with skin and eyes. Avoid breathing mist, vapors. : Wash hands thoroughly after handling. Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands after handling the product Conditions for safe storage, including any incompatibilities Storage conditions : Keep container closed when not in use. Store in a well-ventilated place. Keep cool. Incompatible products : Strong bases. Strong acids. Incompatible materials : Sources of ignition. Direct sunlight. SECTION 8: Exposure controls/personal protection 8.1. Control parameters 06/20/2017 EN (English US) 3/8
4 8.2. Appropriate engineering controls Appropriate engineering controls Environmental exposure controls : Ensure good ventilation of the work station. : Avoid release to the environment Individual protection measures/personal protective equipment Personal protective equipment: Avoid all unnecessary exposure. Hand protection: Wear protective gloves Eye protection: Chemical goggles or safety glasses. Safety glasses Skin and body protection: Wear suitable protective clothing Respiratory protection: Wear appropriate mask. Wear respiratory protection Other information: Do not eat, drink or smoke during use. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state : Liquid Appearance : Viscous Liquid. Color : Clear pale yellow Odor : Acrylic Odor threshold ph Melting point : Freezing point Boiling point : 150 C Flash point : 75 C Relative evaporation rate (butyl acetate=1) Flammability (solid, gas) : Non flammable. Vapor pressure Relative vapor density at 20 C Relative density : > 1 Solubility Log Pow Auto-ignition temperature Decomposition temperature Viscosity, kinematic Viscosity, dynamic 06/20/2017 EN (English US) 4/8
5 Explosion limits Explosive properties Oxidizing properties 9.2. Other information SECTION 10: Stability and reactivity Reactivity The product is non-reactive under normal conditions of use, storage and transport Chemical stability Not established Possibility of hazardous reactions Not established Conditions to avoid Direct sunlight. Extremely high or low temperatures. Avoid contact with hot surfaces. Heat. No flames, no sparks. Eliminate all sources of ignition Incompatible materials Strong acids. Strong bases Hazardous decomposition products fume. Carbon monoxide. Carbon dioxide. SECTION 11: Toxicological information Information on toxicological effects Acute toxicity LD50 oral rat LD50 dermal rabbit ATE US (oral) LD50 oral rat LD50 dermal rat LD50 dermal rabbit LC50 inhalation rat (ppm) LD50 oral rat ATE US (oral) 5564 mg/kg body weight (Rat; Experimental value) > 5000 mg/kg body weight (Rabbit; Experimental value) 5564 mg/kg body weight N/A N/A N/A N/A mg/kg (Rat) mg/kg body weight LD50 oral rat 960 mg/kg (Rat; Literature study) ATE US (oral) Skin corrosion/irritation Serious eye damage/irritation Respiratory or skin sensitization Germ cell mutagenicity Carcinogenicity 960 mg/kg body weight : Causes skin irritation. : Causes serious eye irritation. : May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic skin reaction. Based on available data, the classification criteria are not met IARC group Reproductive toxicity Specific target organ toxicity single exposure 4 - Probably not carcinogenic to humans Based on available data, the classification criteria are not met 06/20/2017 EN (English US) 5/8
6 LOAEL (oral,rat) LOAEL (dermal,rat/rabbit) LOAEC (inhalation,rat,gas) LOAEC (inhalation,rat,vapour ) LOAEC (inhalation,rat,dust/mist/fume) Specific target organ toxicity repeated exposure LOAEL (oral,rat,90 days) LOAEL (dermal,rat/rabbit,90 days) LOAEC (inhalation,rat,gas,90 days) LOAEC (inhalation,rat,vapour,90 days) LOAEC (inhalation,rat,dust/mist/fume,90 days) Aspiration hazard Potential Adverse human health effects and symptoms Symptoms/effects after inhalation Symptoms/effects after skin contact Symptoms/effects after eye contact SECTION 12: Ecological information Toxicity Ecology - general N/A mg/kg body weight N/A mg/kg body weight N/A ppmv/4h N/A mg/l/4h N/A mg/l/4h N/A mg/kg bodyweight/day N/A mg/kg bodyweight/day N/A ppmv/6h/day N/A mg/l/6h/day N/A mg/l/6h/day : Based on available data, the classification criteria are not met. : May cause an allergic skin reaction. May cause allergy or asthma symptoms or breathing difficulties if inhaled. : Causes skin irritation. Irritation. May cause an allergic skin reaction. : Causes serious eye irritation. Eye irritation. : The product is not considered harmful to aquatic organisms or to cause long-term adverse effects in the environment. LC50 fish mg/l (LC50; 96 h) EC50 Daphnia 1 EC50 Daphnia 2 Threshold limit algae 1 Threshold limit algae mg/l (NOEC; OECD 202: Daphnia sp. Acute Immobilisation Test; 48 h; Daphnia magna; Static system; Fresh water; Experimental value) 380 mg/l (EC50; OECD 202: Daphnia sp. Acute Immobilisation Test; 48 h; Daphnia magna; Static system; Fresh water; Experimental value) 836 mg/l (ErC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella subcapitata; Static system; Fresh water; Experimental value) 345 mg/l (EbC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella subcapitata; Static system; Fresh water; Experimental value) LC50 fish 1 > 100 mg/l (LC50; 96 h; Brachydanio rerio) Not established. Readily biodegradable in water. Biodegradability in soil: no data available. Adsorbs into the soil. Biodegradability in water: no data available. Forming sediments in water. Biodegradability in water: no data available. Biodegradability in water: no data available. No (test)data on mobility of the substance available. Photolysis in the air. 06/20/2017 EN (English US) 6/8
7 12.3. Bioaccumulative potential Bioaccumulative potential Not established. BCF fish 1 Log Pow (BCF) (0.42; Experimental value; OECD 107: Partition Coefficient (n-octanol/water): Shake Flask Method; 25 C) Bioaccumulative potential Low potential for bioaccumulation (BCF < 500). Bioaccumulative potential Low potential for bioaccumulation (Log Kow < 4). Log Pow Bioaccumulative potential 4.94 (Estimated value) No bioaccumulation data available. Log Pow 1.09 (Experimental value) Bioaccumulative potential Low potential for bioaccumulation (Log Kow < 4) Mobility in soil Other adverse effects Effect on the global warming GWPmix comment : No known effects from this product. : No known effects from this product. Other information : Avoid release to the environment. SECTION 13: Disposal considerations Disposal methods Waste treatment methods Product/Packaging disposal recommendations Ecology - waste materials SECTION 14: Transport information Department of Transportation (DOT) In accordance with DOT : Dispose of contents/container in accordance with licensed collector s sorting instructions. : Dispose in a safe manner in accordance with local/national regulations. Dispose in a safe manner in accordance with local/national regulations. : Avoid release to the environment. Other information : No supplementary information available. TDG Transport by sea Air transport SECTION 15: Regulatory information US Federal regulations Listed on the United States TSCA (Toxic Substances Control Act) inventory 06/20/2017 EN (English US) 7/8
8 Listed on the United States TSCA (Toxic Substances Control Act) inventory Listed on the United States TSCA (Toxic Substances Control Act) inventory Listed on the United States TSCA (Toxic Substances Control Act) inventory International regulations CANADA Listed on the Canadian DSL (Domestic Substances List) EU-Regulations National regulations US State regulations SECTION 16: Other information Revision date : 07/17/2017 Data sources Other information Full text of H-phrases: : REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification, labeling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006. : None. H227 H302 H315 H317 H319 H334 Combustible liquid Harmful if swallowed Causes skin irritation May cause an allergic skin reaction Causes serious eye irritation May cause allergy or asthma symptoms or breathing difficulties if inhaled SDS US (GHS HazCom 2012) This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as guaranteeing any specific property of the product 06/20/2017 EN (English US) 8/8
: Aelite Aesthetic Enamel
SECTION 1: Identification 1.1. Identification Product form Product name Aelite Aesthetic Enamel Date of issue: 01/19/2018 Version: 1.0 : Mixture 1.2. Recommended use and restrictions on use Use of the
More information: Reveal HD Bulk. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use
SECTION 1: Identification 1.1. Identification Product form Product name Reveal HD Bulk Date of issue: 12/07/2017 Version: 1.0 : Mixture 1.2. Recommended use and restrictions on use Use of the substance/mixture
More information: ALL-BOND SE LINER. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use
SECTION 1: Identification 1.1. Identification Product form Product name ALL-BOND SE LINER Date of issue: 08/28/2017 Version: 1.0 : Mixture 1.2. Recommended use and restrictions on use Use of the substance/mixture
More informationSECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use
SECTION 1: Identification 1.1. Identification Product form Product name : Mixture : GoTo 1.2. Recommended use and restrictions on use Use of the substance/mixture 1.3. Supplier : For Rx Only Manufacturer
More information: Duo-Link Universal Base
SECTION 1: Identification 1.1. Identification Product form Product name Duo-Link Universal Base Date of issue: 03/02/2018 Version: 2.0 : Mixture 1.2. Recommended use and restrictions on use Use of the
More information: Duo-Link Base. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use
SECTION 1: Identification 1.1. Identification Product form Product name Duo-Link Base Date of issue: 01/03/2018 Version: 2.0 : Mixture 1.2. Recommended use and restrictions on use Use of the substance/mixture
More informationSECTION 1: Identification. SECTION 2: Hazard(s) identification. SECTION 3: Composition/Information on ingredients. 1.1.
Date of issue: 1/17/2018 Version: 8 SECTION 1: Identification 1.1. Identification Product form Product name : Mixture : O.V.S. (Ortho Veneer System) Pastes 1.2. Recommended use and restrictions on use
More information: Aeliteflo. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification
Date of issue: 12/03/2014 Revision date: 02/19/2015 Version: 1.1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name : Mixture
More information: ALL-BOND SE/ACE ALL-BOND SE PART II
ALL-BOND SE/ACE ALL-BOND SE PART II Date of issue: 11/21/2014 Revision date: 05/28/2015 Version: 1.2 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier
More information: Resinomer Catalyst. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification
Date of issue: 11/25/2014 Revision date: 03/06/2015 Version: 1.1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name : Mixture
More informationSECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use
SECTION 1: Identification 1.1. Identification Product form Product name Band Lok (with and without Fluoride) Part A Date of issue: 3/5/2018 Version: 9 : Mixture 1.2. Recommended use and restrictions on
More information: CHEMTREC - 24-Hour Hazmat Emergency Communications Center Domestic: Outside the U.S.: , collect calls accepted
SECTION 1: Identification 1.1. Identification Product form Product name Ultra Band Lok Date of issue: 03/07/2017 Version: 10 : Mixture 1.2. Recommended use and restrictions on use Use of the substance/mixture
More information: Bis-Core Base. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification
Date of issue: 12/03/2014 Revision date: 02/06/2015 Version: 1.1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name : Mixture
More informationSECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification
Date of issue: 12/03/2014 Revision date: 02/19/2015 Version: 1.1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form: Mixture Product
More information: BisCem Catalyst. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use
SECTION 1: Identification 1.1. Identification Product form Product name BisCem Catalyst Date of issue:01/17/2018 Version: 3.0 : Mixture 1.2. Recommended use and restrictions on use Use of the substance/mixture
More information: TheraCal LC. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use
SECTION 1: Identification 1.1. Identification Product form Product name TheraCal LC Date of issue: 01/19/2018 Version: 3.0 : Mixture 1.2. Recommended use and restrictions on use Use of the substance/mixture
More informationSECTION 1: Identification. SECTION 2: Hazard(s) identification. SECTION 3: Composition/Information on ingredients. 1.1.
SECTION 1: Identification 1.1. Identification Product form Product name Light Cure Retainer (LCR) Date of issue: 10/19/2016 Version: 8 : Mixture : Light-Cured Retainer 1.2. Relevant identified uses of
More information: Core-Flo DC/Core-Flo DC Lite Base
SECTION 1: Identification 1.1. Identification Product form Product name Core-Flo DC/Core-Flo DC Lite Base Date of issue: 01/27/2017 Version: 2 : Mixture 1.2. Recommended use and restrictions on use Use
More information: Pre-Bond. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use
SECTION 1: Identification 1.1. Identification Product form Product name Date of issue: 07/17/2017 Version: 2.0 : Mixture : 1.2. Recommended use and restrictions on use Use of the substance/mixture 1.3.
More information: Phase II Paste B. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use
SECTION 1: Identification 1.1. Identification Product form Product name Phase II Paste B Date of issue: 3/21/2018 Version: 9 : Mixture 1.2. Recommended use and restrictions on use Use of the substance/mixture
More informationTheraCem Base SECTION 1: Identification 1.2. Relevant identified uses of the substance or mixture and uses advised against
SECTION 1: Identification 1.1. Identification Product form Product name TheraCem Base Date of issue: 01/20/2017 Version: 2 : Mixture : TheraCem Base 1.2. Relevant identified uses of the substance or mixture
More informationOIL, CINNAMON STICKS*
Date of issue: 08/28/2017 Revision date: 08/28/2017 Version: 1.0 SECTION 1: Identification 1.1. Identification Product form Product name : Mixture : OIL, CINNAMON STICKS* 1.2. Recommended use and restrictions
More informationSECTION 1: Identification. SECTION 2: Hazard(s) identification Identification
SECTION 1: Identification 1.1. Identification Product form Polyethylene glycol diacrylate (PEGDA 200) Date of issue: 06/07/2018 Version: 1.0 : Substance Substance name : Polyethylene glycol diacrylate
More information: ALL-BOND 2 PRIMER B
Date of issue: 11/21/2014 Revision date: 04/09/2015 Version: 1.1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name : Mixture
More information: Assure Paste. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification
Date of issue: 5/20/2015 Version: 7 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Assure Paste 1.2. Relevant identified uses of
More informationSECTION 1: Identification. SECTION 2: Hazard(s) identification. SECTION 3: Composition/Information on ingredients. 1.1.
SECTION 1: Identification 1.1. Identification Product form Mighty Bowl 64 Date of issue: 03/09/2017 Revision date: 03/21/2017 Supersedes: 03/21/2017 Version: 2.0 : Mixtures Trade name : Mighty Bowl 64
More information: Bonide Fruit Tree and Plant Guard Concentrate
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name Product code : 4488 : Bonide Fruit Tree and Plant Guard Concentrate 1.2. Relevant
More informationSECTION 1: Identification. SECTION 2: Hazard(s) identification. SECTION 3: Composition/Information on ingredients. 1.1.
SECTION 1: Identification 1.1. Identification Product name RelyA Bond Primer with and without Fluoride Date of issue: 10/18/2016 Version 8 : RELY A PRIMER (with & without Fluoride) 1.2. Relevant identified
More informationSafety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : PHT Entry : M77725 Other means of identification
More information: All-Bond SE / ACE All-Bond SE Part II
SECTION 1: Identification 1.1. Identification Product form Product name All-Bond SE / ACE All-Bond SE Part II Date of issue: 02/14/2018 Version: 2.0 : Mixture 1.2. Recommended use and restrictions on use
More information: One-Step. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use
SECTION 1: Identification 1.1. Identification Product form Product name One-Step Date of issue: 01/02/2018 Version: 3.0 : Mixture : One-Step 1.2. Recommended use and restrictions on use Use of the substance/mixture
More information: Excel Fast Part A. May cause an allergic skin reaction. H317 - May cause an allergic skin reaction H320 - Causes eye irritation
SECTION 1: Identification 1.1. Identification Product form Product name Excel Fast Part A Date of issue: 2/6/2018 Version: 1 : Mixture 1.2. Recommended use and restrictions on use Use of the substance/mixture
More informationSafety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : PHT Ad-Sorb RST : M77435 1.2. Relevant identified
More information: Sulfosalicylic Acid, 20% w/v
SECTION 1: Identification 1.1. Identification Product form Product name Product code Date of issue: 08/21/2014 Revision date: 05/03/2018 Supersedes: 08/21/2014 Version: 1.1 : Mixtures : : LC25545 1.2.
More information: One-Step Plus. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification Recommended use and restrictions on use
SECTION 1: Identification 1.1. Identification Product form Product name One-Step Plus Date of issue: 01/02/2018 Version: 2.0 : Mixture 1.2. Recommended use and restrictions on use Use of the substance/mixture
More information: Resinomer Base. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification
Date of issue: 11/25/2014 Revision date: 03/06/2015 Version: 1.1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name : Mixture
More informationRapture Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
SECTION 1: Identification 1.1. Identification Product form : Mixture Product name : Rapture 4-0-4 Product code : M77612 1.2. Recommended use and restrictions on use 1.3. Supplier JR Simplot Company P.O.
More information: Nature s Defense Water-Based Fly Repellent Spray
SECTION 1: Identification 1.1. Identification Product form Trade name Nature s Defense Water-Based Fly Repellent Spray Date of issue: 09/19/2017 Version: 1.0 : Mixture Synonyms : 12012 1.2. Recommended
More information1875-A Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Date of issue: 04/30/2017
SECTION 1: Identification 1.1. Identification Product form Date of issue: 04/30/2017 : Mixture Product name : Product code : Other means of identification 1.2. Recommended use and restrictions on use 1.3.
More informationH320 - Causes eye irritation H335 - May cause respiratory irritation
Oolitic Aragonite (Calcium Carbonate) Date of issue: 04/05/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking Product form : Substance Substance name :
More informationBabassu Oil Safety Data Sheet
Babassu Oil Safety Data Sheet SECTION 1: Identification of the substance/mixture and of the company/undertaking Product name: Babassu Oil Product code: 301-482X Supplier: Majestic Mountain Sage Inc 2490
More information: Juniper Wood & Lavender
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Product name : Juniper Wood & Lavender Product code : 1.2. Relevant identified
More informationS-Scents Cinnamon Crisp Safety Data Sheet
SECTION 1: Product and company identification Product name : S-Scents Cinnamon Crisp Use of the substance/mixture : Odorant Product code : 018401 Company : Share Corporation P.O. Box 245013 Milwaukee,
More information: Sweat Controls for Cystic Fibrosis Testing
SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : Sweat Controls for Cystic Fibrosis Testing : SS-150 1.2. Relevant identified uses of the substance or mixture
More informationSECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Trade name : Product code : 1.2. Relevant identified uses of the substance
More information: Esomeprazole Sodium for Injection
SECTION 1: Identification 1.1. Identification Product name Other means of identification : Esomeprazole Sodium for Injection : NDC 55150-184-05 (20 mg) NDC 55150-185-05 (40 mg) 1.2. Relevant identified
More information: Sulfanilamide. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification
Date of issue: 12/12/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Substance Substance name : Sulfanilamide
More information: Tea Leaf & Jasmine
Date of issue: 04/23/2015 Revision date: 06/27/2017 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Trade name Product
More information: Sodium 9,10-dihydro-3,4-dihydroxy-9,10-dioxoanthracene-2-sulfonate monohydrate
SECTION 1: Identification 1.1. Identification Product form Substance name Chemical name Alizarin Red S Date of issue: 10/05/2004 Revision date: 09/27/2016 Supersedes: 06/20/2013 Version: 1.1 : Substance
More information: Messy Pet Allergen Blocker
Date of issue: 07/04/2017 Revision date: 07/04/2017 Version: 1.0 SECTION 1: Identification 1.1. Identification Product form Product name : Mixture : Messy Pet Allergen Blocker 1.2. Recommended use and
More information: Iodine, Lugol's, 5% w/v
SECTION 1: Identification 1.1. Identification Product form Product name Product code Date of issue: 12/16/2013 Revision date: 11/01/2017 Supersedes: 11/01/2017 Version: 1.2 : Mixtures : : LC15675 1.2.
More informationMay cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic skin reaction
SECTION 1: Identification 1.1. Identification Product form Product name SDS0011 Date of issue: 04/12/2017 Version: 1.0 : Mixtures 1.2. Recommended use and restrictions on use Use of the substance/mixture
More information: Bonide Captan 50% Wettable Powder
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name Product code : 4459 : 1.2. Relevant identified uses of the substance or mixture and
More information: Whitecap Contractor Strength
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Whitecap Contractor Strength 1.2. Relevant identified uses of the substance or mixture
More informationProvectus Aerobic Bioremediation Reagent Safety Data Sheet
Provectus Aerobic Bioremediation Reagent SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Substance name CAS No Formula Provect-ABR
More informationTriple Threat Safety Data Sheet
SECTION 1: Product and company identification Product name : Triple Threat Use of the substance/mixture : Herbicide Product code : 0363 Company : Total Solutions P.O. Box 240014 Milwaukee, WI 53224 - USA
More information: Pro 1 Oil Supplement
Date of issue: 03/18/2016 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name : Mixture Product code : 93400
More information: Ammonium Acetate. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification. CAS-No. :
SECTION 1: Identification 1.1. Identification Product form Substance name Ammonium Acetate Date of issue: 10/03/2007 Revision date: 05/04/2018 Supersedes: 11/01/2016 Version: 1.2 : Substance : Ammonium
More information: Benzocaine Ointment
SECTION 1: Identification 1.1. Product identifier Benzocaine Ointment Revision date: 10/07/2014 Date of issue: 10/07/2014 Version: 1.0 Product form : Mixture Product name : Benzocaine Ointment 1.2. Relevant
More information: ORANGE CITRUS TCELL
Date of issue: 03/20/2015 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name Product code : 425680 SKU # : 2024260 : ORANGE
More information: CHEMTREC - 24-Hour Hazmat Emergency Communications Center Domestic: Outside the U.S.: , collect calls accepted
Date of issue: 03/12/2014 Revision date: 10/02/2015 : Version: 1.1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Product
More information3.1. Substances Not applicable 3.2. Mixtures Name Product identifier % 1,3,4-Thiadiazole, 2,5-bis(octyldithio)- (CAS-No.)
SECTION 1: Identification 1.1. Identification Product name : According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations (HPR) WHMIS 2015 Date of
More information: Elequil aromatabs Lavender - Sandalwood
SECTION 1: Identification 1.1. Identification Product form Trade name Product code 1.2. Recommended use and restrictions on use Use of the substance/mixture 1.3. Supplier Beekley Corporation 1 Prestige
More information: Meropenem for Injection
SECTION 1: Identification 1.1. Identification Product name : Meropenem for Injection Other means of identification : NDC CODE: 55150-207-20, 55150-208-30 (for 500 mg, 1g) 1.2. Relevant identified uses
More informationSECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Trade name : Mango Mojito Product code : 1.2. Relevant identified uses of
More information: FLUVASTATIN SODIUM CRS
in accordance with Regulation (EC) No. 1907/2006, as amended. Date of issue: 27/06/2013 Revision date: 27/06/2013 Supersedes: 27/11/2009 Version: 3.0 SECTION 1: Identification of the substance/mixture
More informationSECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification
Date of issue06/08/2015 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Trade name : Product code : 18340F 1.2. Relevant
More informationSAFETY DATA SHEET SECTION 1 - IDENTIFICATION
SAFETY DATA SHEET SECTION 1 - IDENTIFICATION Product Identifier: RP-OCNF LIFT STATION DEGREASER Recommended Use: RED SOLVENT LIFT STATION DEGREASER Restrictions on Use: INDUSTRIAL OR PROFESSIONAL USE ONLY
More informationSECTION 1: Identification. SECTION 2: Hazard identification. SECTION 3: Composition/information on ingredients. SECTION 4: First aid measures
SECTION 1: Identification 1.1. Identification Product name : ILSCO X-1000 ILSCO X-1000 DE-OX According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations
More information: Cobalt Nitrate, 8% w/v
SECTION 1: Identification 1.1. Identification Product form Product name Product code Date of issue: 12/11/2014 Revision date: 04/05/2017 Supersedes: 12/11/2014 Version: 1.1 : Mixtures : : LC13220 1.2.
More information: CHEMTREC - 24-Hour Hazmat Emergency Communications Center Domestic: Outside the U.S.: , collect calls accepted GHS07
Date of issue: 20/11/2014 Revision date: 06/03/2015 : Version: 1.1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Product
More informationSASE SFS SPR3. Safety Data Sheet. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification
SASE SASE SFS SPR3 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name. : SASE SFS SPR3 1.2. Relevant identified uses of the substance
More informationSelective Herbicide #3 Broadleaf Weed Killer Safety Data Sheet
SECTION 1: Product and company identification Product name : Use of the substance/mixture : Herbicide Product code : 0360 Company : Athea Laboratories, Inc. P.O. Box 240014 Milwaukee, WI 53224 - USA T
More information: EDTA, Disodium, Dihydrate
SECTION 1: Identification 1.1. Identification Product form Substance name EDTA, Disodium, Dihydrate Date of issue: 10/29/2004 Revision date: 03/23/2017 Supersedes: 09/05/2013 Version: 1.1 : Substance CAS
More information: BENZYL ALCOHOL CRS
in accordance with Regulation (EC) No. 1907/2006, as amended. Date of issue: 27/06/2013 Revision date: 27/06/2013 Supersedes: 04/02/2010 Version: 5.0 SECTION 1: Identification of the substance/mixture
More informationAir care products For professional use only
Date of issue: 03/20/2015 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : CITRUS TCELL Product code : 289141 SKU #
More information: PANTOPRAZOLE SODIUM SESQUIHYDRATE CRS
in accordance with Regulation (EC) No. 1907/2006, as amended. Date of issue: 27/06/2013 Revision date: 27/06/2013 Supersedes: 25/11/2009 Version: 6.0 SECTION 1: Identification of the substance/mixture
More information: Ampicillin for Injection
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name Other means of identification : Ampicillin for Injection : NDC: 55150-111-10, 55150-112-10,
More informationSECTION 1: IDENTIFICATION 1.1. Product Identifier
SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Mixture Product Name: 1.2. Intended Use of the Product Use of the Substance/Mixture: Waterproofing. 1.3. Name, Address, and Telephone of
More informationDerma+Flex QS Adhesive Safety Data Sheet
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name :Derma+Flex QS high viscoscity tissue adhesive 1.2. Relevant identified uses of the
More information: ProSpec Moisture Guard Max Part A
Date of issue: 07/04/2013 Revision date: 07/04/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Substance name :
More informationSECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification
Date of issue: 05/09/2016 Revision date: 05/09/2016 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Product code :
More information: ISOPON WINDSCREEN RESIN (WSR-R-AU)
Date of issue:12/04/2017 Revision date: : Version: 1.0 SECTION 1: Identification : Product identifier and chemical identity Product name : ISOPON WINDSCREEN RESIN (WSR-R-AU) Other means of identification
More informationSECTION 1: Identification of the substance/mixture and of the company/undertaking
Date of issue: 10/05/2004 Revision date: 06/20/2013 Supersedes: 10/06/2004 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product
More informationSafety Data Sheet Lugol s Iodine, Concentrate Revision Date: 02/06/18
Safety Data Sheet Lugol s Iodine, Concentrate Revision Date: 02/06/18 1. PRODUCT AND COMPANY IDENTIFICATION 1.1 Product Identifier Trade name: Lugol s Iodine Concentrate Product code(s): 400353, 400354,
More information: AB 3000 Hand Soap GHS07
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name : Mixture : Product code : BAB9289 / 9289GL 1.2. Relevant identified
More informationManufacturer EXXON MOBIL CORPORATION Springwoods Village Parkway Spring, TX USA
Revision Date: 05/01/2015 Date of issue: 05/01/2015 Version: 1.0 SECTION 1: IDENTIFICATION Product Identifier Product Form: Mixture Product Name: #67 Grease Intended Use of the Product Lubricant Name,
More information: BioFX Fluorescence Preserving Media
Revision date: Version: 0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name Product form Product code : BioFX Fluorescence Preserving
More information: Penetreat. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification
Date of issue: 08/28/2015 Revision date: 10/20/2015 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name Product code EPA
More information: SALBUTAMOL SULFATE CRS
Date of issue: 27/06/2013 Revision date: 27/06/2013 Supersedes: 04/02/2010 Version: 6.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product
More information1.4. Emergency telephone number : CHEM TEL: (24hr); Outside the US: (collect call)
Date of issue: 04/23/2015 Revision date: 01/03/2017 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name Product code : :
More informationSECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY
Date of issue: 09/12/2014 Version: 1.0 SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY 1.1. Product Identifier Product Form: Substance Product Name: CAS No: 334-48-5 Formula: C10H20O2
More informationOxacillin for Injection Safety Data Sheet
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : -- NDC 55150-127-15 (1g 10s), NDC 55150-128-24 (2g 10s), NDC 55150-128-25 (2g 10s),
More informationSignal Word (GHS-US) 05/13/2015 EN (English US) 1/7 GHS08
Revision Date: 05/13/2015 Date of issue: 05/13/2015 Version: 1.0 SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Mixture Product Name: Product Code: 4800-30-09 1.2. Intended Use of the
More information: Ferrous Ammonium Sulfate Hexahydrate
SECTION 1: Identification 1.1. Identification Product form Substance name Chemical name Ferrous Ammonium Sulfate Hexahydrate Date of issue: 08/31/2006 Revision date: 06/27/2017 Supersedes: 06/27/2013 Version:
More information: Ammonium Acetate. SECTION 1: Identification of the substance/mixture and of the company/undertaking
75504 Date of issue: 10/03/2007 Revision date: 06/20/2013 Supersedes: 07/07/2010 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product
More information: Protease (Subtilisin A from Bacillus licheniformis) Powder
Protease (Subtilisin A from Bacillus licheniformis) Powder Date of issue: 25/02/2014 Revision date: 20/09/2017 Supersedes: 12/01/2017 Version: 1.3 SECTION 1: Identification of the substance/mixture and
More informationName Product identifier % GHS-US classification
Date of issue: 02/18/2015 Revision date: 05/15/2017 Version: 1.2 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name Product code : :
More informationCitriBoost. Safety Data Sheet. Prepared according to Federal register / Vol. 77, No. 58/ Monday, March 26th 2012 / Rules and Regulations
Qmin TM CitriBoost Revision date: 10/27/2015 Supersedes: N/A SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product Identifier Product name : Qmin CitriBoost Product
More information