QUICK 'n BRITE PASTE

Transcription

1 Section 1: Identification Of the Substance/Mixture And Of The Supplier Supplier Manufacturer th Avenue West th Avenue West Mountlake Terrace, WA Mountlake Terrace, WA E -M a i l : allang@quicknbrite.com Web Site: E -M a i l : allang@quicknbrite.com Web Site: Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number Allan Gourlie: Allan Gourlie: Issue Date: 08/11/2015 Product Name: CAS Number: NA Chemical Family: Mixture Product/Material Uses Quick 'n Brite Paste is an all-purpose cleaning product for use on all household surfaces. Section 2: Hazards Identification Hazard Classification(s) HAZARD CLASSIFICATION(S): Skin Corrosion/Irritation: Category 3 SIGNAL WORD: WARNING HAZARD STATEMENTS: Causes mild skin irritation (H316) PRECAUTIONARY STATEMENTS: P332+P313 - If skin irritation occurs: Get medical attention/advice. Section 3: Composition/Information On Ingredients Ingredient CAS Percent Of Name Number Total Weight sodium cocoate sodium carbonate sodium sesquicarbonate sodium tripolyphosphate Section 4: First Aid Measures Eye IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention immediately if irritation develops and persists. Skin Wash affected areas with soap and water. Get medical attention if irritation (e.g., redness, rash) develops and persists. Ingestion If swallowed, do not induce vomiting unless directed to do so by medical personnel. Call a physician or a poison Page 1 of 5

2 Section 4: First Aid Measures - Continued Ingestion - Continued control center immediately. If person is fully conscious, give one or two cups of water or milk to drink. Never give anything by mouth to an unconscious person. Inhalation No inhalation first aid is anticipated to be necessary. Remove person from source of exposure to fresh air. Get medical attention if irritation develops. Section 5: Fire Fighting Measures Fire And Explosion Hazards Thermal decomposition ("burning") may evolve toxic or irritating combustion byproducts, such as oxides of carbon and phosphorus. Extinguishing Media Use the appropriate extinguishing media for the surrounding fire. Fire Fighting Instructions Move containers away from fire area if safe to do so. Water can be used to cool and protect exposed material. Firefighters should wear self-contained breathing apparatus and full protective gear. Section 6: Accidental Release Measures Scoop up excess and place in a closed container. Scrub area well to reduce slipperiness. Section 7: Handling And Storage Handling And Storage Precautions Keep out of reach of children. Store in a cool, dry, well-ventilated area. Wash hands thoroughly after handling. Section 8: Exposure Controls/Personal Protection Engineering Controls None normally required. Large amounts of dried material may generate dust. Eye/Face Protection None normally required for typical household use. Safety glasses are recommended as minimum industrial eye protection when handling bulk product or performing spill cleanup. Skin Protection None normally required. The use of rubber gloves may reduce the chance of minor irritation or rash in sensitive individuals. Respiratory Protection None normally required. In case of inadequate ventilation, use NIOSH-approved respirator for dust (e.g., N95). Section 9: Physical And Chemical Properties Appearance pink paste Odor a very light soap odor or odorless Chemical Type: Mixture Physical State: Solid Melting Point: not available F Boiling Point: ~200 F Specific Gravity: not available Page 2 of 5

3 Section 9: Physical And Chemical Properties - Continued Percent Volatiles: 0 Vapor Pressure: not applicable Vapor Density: not applicable ph Factor: S o l u b i l i t y: appreciable Evaporation Rate: not available Partition Coefficient (n-octanol/water): not available Flash Point: not available Flammability (solid, gas): not available Lower Explosive Limit (LEL %): not applicable Upper Explosive Limit (UEL %): not applicable Autoignition Temperature: not available Decomposition Temperature: not available Section 10: Stability And Reactivity S t a b i l i t y: Stable Hazardous Polymerization: Will Not Occur Incompatible Materials Avoid contact with strong acids and water reactive substances. May corrode some metals. Hazardous Decomposition Products Thermal oxidation (i.e., "burning") may produce decomposition products of carbon and sodium. Section 11: Toxicological Information Eye Effects Eye contact with dust, mist or spray may cause mild eye irritation but is not a significant eye irritant. Skin Effects Product is slightly alkaline. Contact with skin and mucuous membranes may cause mild skin irritation, but is not expected to be a significant skin irritant. Acute Oral Effects Accidental ingestion of sufficient quantities to cause significant health effects is considered unlikely. Intentional ingestion of large amounts may cause nausea, vomiting, diarrhea and gastrointestinal upset. Laboratory test animals given oral administrations of sodium tripolyphosphate experienced nervous system effects. The relevance of this information to human exposure is unknown. Acute Inhalation Effects There is insufficient information available for this product to assess acute inhalation toxicity. Inhalation of dust from dried product may cause mild nose and throat irritation. Chronic/Carcinogenicity Neither the product overall nor any of its ingredients are known to be listed as potentially carcinogenic by NTP, IARC, OSHA or ACGIH. Reproductive Effects Product and its ingredients are not expected to pose any significant reproductive hazards from normal use. Mutagenicity (Genetic Effects) No information is available regarding the germ cell mutagenicity of this product or its ingredients. Ingredient(s) - Toxicological Data sodium carbonate Page 3 of 5

4 Section 11: Toxicological Information - Continued Ingredient(s) - Toxicological Data - Continued LC50 (inhal, guinea pig): 800 mg/m3 (2 hrs) LC50 (inhal, rat): 2300 mg/m3 (2 hrs) LD50 (oral, mouse): 6600 mg/kg LD50 (oral, rat): 4090 mg/kg sodium tripolyphosphate LD50 (oral, rat): 3,900 mg/kg LD50 (oral, mouse): 3,100 mg/k3 LD50 (dermal, rabbit): 4,640 mg/kg Section 12: Ecological Information Ecotoxicological Information No information available. Not believed to present a significant environmental hazard. Section 13: Disposal Considerations Dispose in accordance with applicable federal, state and local government regulations. Dispose of bulk amounts in an environmentally responsible manner. RCRA Information Product is not formulated to contain materials which are listed as hazardous wastes or as determined by Toxicity Characteristic Leachate Procedure (TCLP). Does not exhibit characteristics of ignitibility, corrosivity, or reactivity. Section 14: Transport Information Proper Shipping Name Not regulated for transportation Section 15: Regulatory Information U.S. Regulatory Information Toxic Substance Control Act (TSCA): All ingredients of this product are listed on the TSCA 8(b) Chemical Substance Inventory or are exempt. SARA Section 313 Notification This product does not contain any ingredients regulated under Section 313 of the Emergency Planning and Community Right-To-Know Act of 1986 or 40 CFR 372. Ingredient(s) - State Regulations sodium tripolyphosphate New Jersey - Workplace Hazard Pennsylvania - Workplace Hazard Pennsylvania - Environmental Hazard New York City - Hazardous Substance Section 16: Other Information NFPA Rating H e a l th : 0 F i r e : 0 R e a c t i v i t y: 0 HMIS Rating H e a l th : 0 F i r e : 0 R e a c t i v i t y: 0 Page 4 of 5

5 Section 16: Other Information - Continued HMIS Rating - Continued Revision/Preparer Information This SDS Supercedes A Previous (M)SDS Dated: 08/11/2015 Disclaimer Although reasonable care has been taken in the preparation of this document, we extend no warranties and make no representations as to the accuracy or completeness of the information contained therein, and assume no responsibility regarding the suitablility of this information for the user's intended purposes or for the consequences of its use. Each individual should make a determination as to the suitability of the information for their particular purpose(s). Printed Using MSDS Generator 2000 Page 5 of 5