Document id : Issue date : 03/10/2003 Version : 5.01 Supersedes date : 03/10/2003 Document status : Issued Format : 23
|
|
- Marcia Haynes
- 6 years ago
- Views:
Transcription
1 3M UK PLC 3M CENTRE, CAIN RD, BRACKNELL, BERKSHIRE RG12 8HT Tel: ======================================================================== Kit MSDS ======================================================================== Document id : Issue date : 03/10/2003 Version : 5.01 Supersedes date : 03/10/2003 Document status : Issued Format : 23 1 INFORMATION REGARDING KIT Dear Customer, This is the cover sheet for the KIT MSDS. You will find the document numbers of the MSDS that belong to the kit here on this page. Tradename: 3M SCOTCH-WELD (TM) EPOXY ADHESIVE DP-190-EG 3M Product ID: Kit Components SCOTCH-WELD (TM) EPOXY ADHESIVE DP-190-EG (PART A) M SCOTCH-WELD (TM) EPOXY ADHESIVE DP-190-EG (PART B) 3M UK PLC 3M CENTRE, CAIN RD, BRACKNELL, BERKSHIRE RG12 8HT Tel: ======================================================================== MATERIAL SAFETY DATA SHEET ======================================================================== Document id : Issue date : 03/10/2003 Version : 6.01 Supersedes date : 03/10/2003 Document status : Issued Format : 1 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION Tradename: SCOTCH-WELD (TM) EPOXY ADHESIVE DP-190-EG (PART A) 3M Product ID: multimedia.3m.com/ /mediawebserv 1/16
2 2 COMPOSITION/INFORMATION ON INGREDIENTS Ingredient name and classification CAS number Percentage ALIPHATIC POLYMER DIAMINE EU Hazard Symbols and Risk Phrases: EU - 3M Classified (Xi; R: ) SULFONIC ACID SALT BIS(3-AMINOPROPYL) ETHER OF Less Than 3 DIETHYLENE GLYCOL EU Hazard Symbols and Risk Phrases: EU - Vendor Classified (C; R:34-52/53) 3 HAZARDS IDENTIFICATION Critical hazards: Irritant. Risk of serious damage to eyes. Irritating to skin. May cause sensitisation by skin contact. 4 FIRST-AID MEASURES Eye Contact: Get immediate medical attention. Immediately flush eyes with large amounts of water for at least 15 minutes. Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water. Get medical attention. Wash contaminated clothing and shoes before reuse. Inhalation: Remove person to fresh air. If signs/symptoms develop, get medical attention. SCOTCH-WELD (TM) EPOXY ADHESIVE DP-190-EG (PART A) Page 2 of 7 Total Pages Ingestion: Do not induce vomiting. Get immediate medical attention. Give victim two glasses of water. Never give anything by mouth to an unconscious person. 5 FIRE-FIGHTING MEASURES multimedia.3m.com/ /mediawebserv 2/16
3 Suitable Extinguishing Media: Ordinary combustible material. Use fire extinguishers with class A extinguishing agents (e.g., water, foam). Hazardous Decomposition: Oxides of Nitrogen, Amine Compounds. Carbon Monoxide, Carbon Dioxide. Fire-Fighting Procedures: Wear full protective clothing, including helmet, self-contained positive pressure or pressure demand breathing apparatus, tunic and trousers (leggings), bands around arms, waist and legs, face mask, and protective covering for exposed areas of the head. Special Instructions: Not applicable. 6 ACCIDENTAL RELEASE MEASURES Personal Precautions: Refer to other sections of this Material Safety Data Sheet for information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment. Methods for Cleaning up: Contain spill. Collect as much of the spilled material as possible. Place in a closed container approved for transportation by appropriate authorities. 7 HANDLING AND STORAGE Incompatible Materials/Conditions: Store away from acids. Ventilation: Keep container in a well-ventilated area. Precautions for Safe Handling: For industrial or professional use only. SCOTCH-WELD (TM) EPOXY ADHESIVE DP-190-EG (PART A) Page 3 of 7 Total Pages 8 EXPOSURE CONTROLS/PERSONAL PROTECTION multimedia.3m.com/ /mediawebserv 3/16
4 Eye Protection: Avoid eye contact. The following should be worn alone alone or in combination, as appropriate or in combination, to prevent eye contact: Safety glasses with side shields. Indirect vented goggles. Hand Protection: The following glove material(s) are recommended: Butyl rubber. Polyethylene/ethylene vinyl alcohol. Skin Protection: Avoid skin contact. Respiratory Protection: Avoid inhalation of vapours, mists or spray. Select one of the following approved respirators based on airborne concentration of contaminants and in accordance with regulations: Half face piece or full face air-purifying respirator with organic vapour cartridges. Ingestion: Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Recommended Ventilation: Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below Occupational Exposure Limits and/or control mist, vapour, or spray. If ventilation is not adequate, use respiratory protection equipment. Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below Occupational Exposure Limits. If ventilation is not adequate, use respiratory protection equipment. Exposure Limits: 9 PHYSICAL AND CHEMICAL PROPERTIES Appearance and Odour: ph: Boiling point/boiling range: Melting point/melting range: Flash point: Autoflammability: Light amber liquid with slight amine odour. Not applicable Not applicable Greater than 100 C multimedia.3m.com/ /mediawebserv 4/16
5 SCOTCH-WELD (TM) EPOXY ADHESIVE Page 4 of 7 Total Pages DP-190-EG (PART A) Vapour pressure: Water Solubility: Specific gravity: Vapour density: Volatile organic compounds: Evaporation rate: Viscosity: Less Than 0.01 mmhg 20 C Nil Approximately 1.01 Water=1 Approximately centipoise Percent Volatile: 0 % by wt 10 STABILITY AND REACTIVITY Conditions to Avoid: Store away from heat. Heat is generated during cure. Do not cure a mass larger than 50 grams in a confined space to prevent a premature reaction (exotherm) with production of intense heat and smoke. Materials to Avoid: None known. Hazardous Decomposition: Stable. Hazardous polymerisation will not occur. 11 TOXICOLOGICAL INFORMATION Effects from Eye Contact: Corrosive (Eye Burns): Signs/symptoms may include cloudy appearance of the cornea, chemical burns, severe pain, tearing, ulcerations, significantly impaired vision or complete loss of vision. Vapours from heated material may cause eye irritation. Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision. Effects from Skin Contact: Severe Skin Irritation: Signs/symptoms may include localised redness, swelling, itching, dryness, cracking, blistering, and pain. Prolonged or repeated exposure may cause: Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching. Effects from Inhalation: multimedia.3m.com/ /mediawebserv 5/16
6 Upper Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, SCOTCH-WELD (TM) EPOXY ADHESIVE DP-190-EG (PART A) Page 5 of 7 Total Pages hoarseness, and nose and throat pain. Vapours from heated material may cause irritation of the respiratory system. Signs/symptoms may include cough, sneezing, nasal discharge, headache,hoarseness, nose and throat pain. Effects from Ingestion: Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, nausea, diarrhoea and vomiting. 12 ECOLOGICAL INFORMATION Ecotoxicity Data:. Ecofate Data:. Special statements for 2001/58/EC: One or more components of this product have significant known or predicted environmental hazards, but a conservative assessment indicates a low environmental risk. Intended use and proper disposal are unlikely to cause the environmentally hazardous component(s) to enter the environment in quantities or by routes that could cause the adverse environmental impacts. 13 DISPOSAL CONSIDERATIONS Product after Use: Incinerate uncured product in a permitted hazardous waste incinerator in the presence of a combustible material. As a disposal alternative, dispose of waste product in a permitted hazardous waste facility. Special Instructions: Dispose of completely cured (or polymerised) wastes in a sanitary landfill. Since regulations vary, consult applicable regulations or authorities before disposal. 14 TRANSPORT INFORMATION multimedia.3m.com/ /mediawebserv 6/16
7 UN NUMBER: UN number: Not restricted for transportation. UK ROAD/SEA FREIGHT (IMO) CLASSIFICATION: Substance Identification Number: Class: SCOTCH-WELD (TM) EPOXY ADHESIVE DP-190-EG (PART A) Page 6 of 7 Total Pages Packing Group: Proper Shipping Name: CDG-ROAD (if applicable) ADR/RID CLASSIFICATION: Class: Item Number: ICAO/IATA CLASSIFICATION: Class: Sub-Risk: Packing Group: Proper Shipping Name: 15 REGULATORY INFORMATION Symbol(s): (Xi) St. Andrew's Cross (Irritant). Risk Phrases: (R41) Risk of serious damage to eyes. (R38) Irritating to skin. (R43) May cause sensitisation by skin contact. Safety Phrases: Use only in well ventilated areas. Do not breathe vapour. Do not breathe dust. Avoid contact with the skin and eyes. Wear suitable gloves and eye protection. In case of contact with eyes, rinse immediately with plenty of water and seek medical multimedia.3m.com/ /mediawebserv 7/16
8 advice. After contact with skin, wash immediately with plenty of soap and water. 16 OTHER INFORMATION Regulatory Information: The following UK Regulations as amended may affect the product as supplied: The Chemicals (Hazard Information and Packaging for supply) Regulations, as amended. The Carriage of Dangerous Goods (Classification, Packaging and Labelling) and use of Transportable Pressure Receptacles Regulations 1996, SCOTCH-WELD (TM) EPOXY ADHESIVE DP-190-EG (PART A) Page 7 of 7 Total Pages as amended. Carriage of Dangerous Goods by Road regulations, 1996, as amended. The Petroleum (Consolidation) Act The Control of Substances Hazardous to Health Regulations 1999 as amended. The Special Waste Regulations 1996, as amended. The Environmental Protection Act, 1990 The Health and Safety at Work Act, Reissue date/reason for reissue. Updated accidental release, toxicological and label information. Intended Use of Product: Bonding various substrates. The information on this Data Sheet is based on our experience and is correct to the best of our knowledge at the date of publication, but we do not accept any liability for any loss, damage or injury resulting from its use (except as required by law). The information may not be valid for any use not referred to in this Data Sheet or use of the product in combination with other materials. For these reasons, it is important that customers carry out their own test to satisfy themselves as to the suitability of the product for their own multimedia.3m.com/ /mediawebserv 8/16
9 intended applications. 3M UK PLC 3M CENTRE, CAIN RD, BRACKNELL, BERKSHIRE RG12 8HT Tel: ======================================================================== MATERIAL SAFETY DATA SHEET ======================================================================== Document id : Issue date : 03/10/2003 Version : 4.01 Supersedes date : 19/05/2003 Document status : Issued Format : 1 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION Tradename: 3M SCOTCH-WELD (TM) EPOXY ADHESIVE DP-190-EG (PART B) 3M Product ID: 2 COMPOSITION/INFORMATION ON INGREDIENTS Ingredient name and classification CAS number Percentage EPOXY RESIN EU Hazard Symbols and Risk Phrases: EU - Adaptation 25 (Xi,N; R: ) EPOXY RESIN EU Hazard Symbols and Risk Phrases: EU - Vendor Classified (Xi,N; R:43-51/53) 3 HAZARDS IDENTIFICATION Critical hazards: Irritant. Dangerous to environment. Irritating to eyes and skin. May cause sensitisation by skin contact. Toxic to aquatic organisms. May cause long-term adverse effects in the aquatic environment. 4 FIRST-AID MEASURES Eye Contact: Flush eyes with large amounts of water. If signs/symptoms multimedia.3m.com/ /mediawebserv 9/16
10 persist, get medical attention. Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water. Get medical attention. Wash contaminated clothing and shoes before reuse. Inhalation: Remove person to fresh air. If signs/symptoms develop, get medical attention. 3M SCOTCH-WELD (TM) EPOXY ADHESIVE DP-190-EG (PART B) Page 2 of 7 Total Pages Ingestion: Do not induce vomiting. Get immediate medical attention. Give victim two glasses of water. Never give anything by mouth to an unconscious person. 5 FIRE-FIGHTING MEASURES Suitable Extinguishing Media: Ordinary combustible material. Use fire extinguishers with class A extinguishing agents (e.g., water, foam). Hazardous Decomposition: Aldehydes. Carbon Monoxide, Carbon Dioxide. Fire-Fighting Procedures: Wear full protective clothing, including helmet, self-contained positive pressure or pressure demand breathing apparatus, tunic and trousers (leggings), bands around arms, waist and legs, face mask, and protective covering for exposed areas of the head. Water may be used to blanket the fire. Special Instructions: None known. 6 ACCIDENTAL RELEASE MEASURES Personal Precautions: Refer to other sections of this Material Safety Data Sheet for information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment. Methods for Cleaning up: Evacuate unprotected and untrained personnel from hazard area. The spill should be cleaned up by qualified personnel. Collect multimedia.3m.com/ /mediawebserv 10/16
11 as much of the spilled material as possible. Place in a closed container approved for transportation by appropriate authorities. 7 HANDLING AND STORAGE Incompatible Materials/Conditions: Store away from acids. Store away from oxidising agents. Ventilation: Keep container in a well-ventilated area. Precautions for Safe Handling: For industrial or professional use only. Avoid contact with oxidising agents. 3M SCOTCH-WELD (TM) EPOXY ADHESIVE DP-190-EG (PART B) Page 3 of 7 Total Pages 8 EXPOSURE CONTROLS/PERSONAL PROTECTION Eye Protection: Avoid eye contact. Avoid eye contact with vapours, mists, or spray. The following should be worn alone alone or in combination, as appropriate or in combination, to prevent eye contact: Safety glasses with side shields. Indirect vented goggles. Hand Protection: The following glove material(s) are recommended: Polyethylene/ethylene vinyl alcohol. Skin Protection: Avoid skin contact. Respiratory Protection: Avoid inhalation of vapours, mists or spray. Select one of the following approved respirators based on airborne concentration of contaminants and in accordance with regulations: Half face piece or full face air-purifying respirator with organic vapour cartridges. Ingestion: Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Recommended Ventilation: Use in a well-ventilated area. Provide ventilated enclosure multimedia.3m.com/ /mediawebserv 11/16
12 for heat curing. Curing enclosures must be exhausted to outdoors or to a suitable emission control device. Exposure Limits: 9 PHYSICAL AND CHEMICAL PROPERTIES Appearance and Odour: ph: Boiling point/boiling range: Melting point/melting range: Flash point: Autoflammability: Vapour pressure: Water Solubility: Clear liquid paste. Not applicable Greater than C Less Than 0.02 mmhg 20 C Nil 3M SCOTCH-WELD (TM) EPOXY ADHESIVE DP-190-EG (PART B) Page 4 of 7 Total Pages Specific gravity: Vapour density: Volatile organic compounds: Evaporation rate: Viscosity: Percent Volatile: 1.14 Water= centipoise Nil 10 STABILITY AND REACTIVITY Conditions to Avoid: Store away from acids. Store away from heat. Heat is generated during cure. Do not cure a mass larger than 50 grams in a confined space to prevent a premature reaction (exotherm) with production of intense heat and smoke. multimedia.3m.com/ /mediawebserv 12/16
13 Materials to Avoid: Strong acids. Strong oxidising agents. Hazardous Decomposition: Stable. Hazardous polymerisation will not occur. 11 TOXICOLOGICAL INFORMATION Effects from Eye Contact: Moderate Eye Irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision. Vapours from heated material may cause eye irritation. Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision. Effects from Skin Contact: Mild Skin Irritation: signs/symptoms may include localised redness, swelling, and itching. Prolonged or repeated exposure may cause: Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching. Effects from Inhalation: Vapours from heated material may cause irritation of the respiratory system. Signs/symptoms may include cough, sneezing, nasal discharge, headache,hoarseness, nose and throat pain. Effects from Ingestion: Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, nausea, diarrhoea and vomiting. 3M SCOTCH-WELD (TM) EPOXY ADHESIVE DP-190-EG (PART B) Page 5 of 7 Total Pages 12 ECOLOGICAL INFORMATION Ecotoxicity Data:. Ecofate Data:. Special statements for 2001/58/EC: One or more components of this product have significant known or predicted environmental hazards, but a conservative assessment indicates a low environmental risk. Intended use and proper disposal are unlikely to cause the environmentally multimedia.3m.com/ /mediawebserv 13/16
14 hazardous component(s) to enter the environment in quantities or by routes that could cause the adverse environmental impacts. Other Effects and Information: A conservative, screening level assessment of this product indicates that its use and proper disposal are likely to present a low environmental risk. Potential use and misuse are unlikely to cause components to enter the environment in quantities or by routes that could cause adverse environmental impacts. 13 DISPOSAL CONSIDERATIONS Potential for Recycling: Reclaim if feasible. Special Instructions: As a disposal alternative, incinerate uncured product in an industrial or commercial incinerator. Dispose of completely cured (or polymerised) wastes in a sanitary landfill. Since regulations vary, consult applicable regulations or authorities before disposal. 14 TRANSPORT INFORMATION UN NUMBER: UN number: Not restricted for transportation. UK ROAD/SEA FREIGHT (IMO) CLASSIFICATION: Substance Identification Number: Class: Packing Group: 3M SCOTCH-WELD (TM) EPOXY ADHESIVE DP-190-EG (PART B) Page 6 of 7 Total Pages Proper Shipping Name: CDG-ROAD (if applicable) ADR/RID CLASSIFICATION: multimedia.3m.com/ /mediawebserv 14/16
15 Class: Item Number: ICAO/IATA CLASSIFICATION: Class: Sub-Risk: Packing Group: Proper Shipping Name: 15 REGULATORY INFORMATION Symbol(s): (Xi) St. Andrew's Cross (Irritant). (N) Dangerous to environment. Risk Phrases: (R36/38) Irritating to eyes and skin. (R43) May cause sensitisation by skin contact. (R51/53) Toxic to aquatic organisms. May cause long-term adverse effects in the aquatic environment. Safety Phrases: Avoid contact with the skin and eyes. Wear suitable gloves and eye and face protection. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. After contact with skin, wash immediately with plenty of soap and water. Contains Epoxy Resins. See information supplied by manufacturer. Avoid release to the environment. Refer to special instructions/safety data sheets. 16 OTHER INFORMATION Regulatory Information: The following UK Regulations as amended may affect the product as supplied: The Chemicals (Hazard Information and Packaging for supply) Regulations, as amended. The Carriage of Dangerous Goods (Classification, Packaging and Labelling) and use of 3M SCOTCH-WELD (TM) EPOXY ADHESIVE DP-190-EG (PART B) Page 7 of 7 Total Pages multimedia.3m.com/ /mediawebserv 15/16
16 Reissue date/reason for reissue. Checked MSDS history. Intended Use of Product: Bonding various substrates. Transportable Pressure Receptacles Regulations 1996, as amended. Carriage of Dangerous Goods by Road regulations, 1996, as amended. The Petroleum (Consolidation) Act The Control of Substances Hazardous to Health Regulations 1999 as amended. The Special Waste Regulations 1996, as amended. The Environmental Protection Act, 1990 The Health and Safety at Work Act, The information on this Data Sheet is based on our experience and is correct to the best of our knowledge at the date of publication, but we do not accept any liability for any loss, damage or injury resulting from its use (except as required by law). The information may not be valid for any use not referred to in this Data Sheet or use of the product in combination with other materials. For these reasons, it is important that customers carry out their own test to satisfy themselves as to the suitability of the product for their own intended applications. multimedia.3m.com/ /mediawebserv 16/16
Document id : Issue date : Version : 1.08 Supersedes date : Document status : : 1
Page 1 of 6 3M UK PLC 3M HOUSE, PO BOX 1, MARKET PLACE, BRACKNELL, BERKSHIRE RG12 1JU Tel: 01344 858000 ======================================================================== MATERIAL SAFETY DATA SHEET
More informationMATERIAL SAFETY DATA SHEET Mercury 5 Min and 15 Min Epoxy. Mercury 5 Min Mercury 15 Min A
MATERIAL SAFETY DATA SHEET Mercury 5 Min and 15 Min Epoxy COMPANY NAME: Mercury Adhesives Inc ADDRESS: 6110 Parkway North Dr Cumming GA 30040 PHONE: 1 770-886-9566 TRADE NAME: CHEMICAL NAME: Mercury 5
More informationDocument id : Issue date : 04/08/2004 Version : 3.00 Supersedes date : 10/07/2003
3M UK PLC 3M RS IRELAND CHIP3 MSDS Date 01/07/07 3M CENTRE, CAIN RD, 3M HOUSE, ADELPHI CENTRE, BRACKNELL, BERKSHIRE, RG12 8HT DUN LAOGHAIRE, CO. DUBLIN Tel: 01344 858000 Supplied by: Tel: 01 2803555 RS
More informationDocument id : Issue date : 16/04/2008 Version : 2.01 Supersedes date : 27/03/2008
======================================================================== SAFETY DATA SHEET ======================================================================== Document id : 09-2511-5 Issue date :
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET Document ID : 13-0502-1 Issue date : 23/02/2005 Version : 1.00 Supersedes date : NIL Document status : Issued Total No. of Pages : 6 This MSDS has been prepared by PSK Pharma
More information3M AVAGARD 9232 ANTISEPTIC HAND AND BODY WASH - CHLORHEXIDINE GLUCONATE 2 MSDS
3M AUSTRALIA PTY LIMITED 3M NEW ZEALAND LTD 950 Pacific Highway 250 Archers Road Pymble NSW 2073 Glenfield Auckland N.Z. Phone: 136 136 Phone: (9) 444 4760 24HR EMERGENCY: 1800 097 146 (Australia only).
More informationMaterial Safety Data Sheet
1. PRODUCT AND COMPANY IDENTIFICATION Product Name: Manufacturer Performance Polymer Solutions Inc. (P 2 SI) 2711 Lance Dr. Moraine, OH 45409 Company Contact: Jason E. Lincoln, Ph.D. Telephone Number:
More information*** SAFETY DATA SHEET ***
*** SAFETY DATA SHEET *** 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING PRODUCT NAME Permabond 802 RECOMMENDED USE SUPPLIER Adhesive Permabond Engineering Adhesives Ltd
More informationEMERGENCY PHONE: or (651) (24 hours)
Material Safety Data Sheet Copyright, 2006, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1)
More informationFoam Quat Page 1of 5 Foam Quat SAFETY DATA SHEET (2) HAZARD(S) IDENTIFICATION
Foam Quat Page 1of 5 Foam Quat SAFETY DATA SHEET (1) IDENTIFICATION Name: Use: Supplier: Foam Quat Disinfectant/Cleanser Vetoquinol USA (Tomlyn Products) 4250 N. Sylvania Ave Fort Worth, TX 76137 Tel:
More informationMATERIAL SAFETY. St. Paul, Minnesota or (651) (24 hours)
MATERIAL SAFETY DATA SHEET 3M 3M Center St. Paul, Minnesota 55144-1000 1-800-364-3577 or (651) 737-6501 (24 hours) Copyright, 2001, Minnesota Mining and Manufacturing Company. All rights reserved. Copying
More informationPRODUCT: CHEMSET 800 SERIES EPOXY ANCHORING ADHESIVE HARDENER
MSDS No: 1056 ISSUE: 3 DATE OF ISSUE: 13/5/04 Page 1 of 5 SECTION 1: IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Chemset 801, Chemset 802 Epoxy Anchoring Adhesive Hardener Part B Manufacturer
More informationF ca mmhg at 68 deg F N/D tl/d 1.6
General Offices Center 9302 DIVISION: PRINTING AND PUBLISHING SYSTEMS trade NAME: VIKING(TM) 2-IN-1 DEVELOPER-GUM I.D. NUMBER: 77-9803-2150-7 77-9803-6754-2 77-9804-0044-2 ISSUED: SEPTEMBER 29, 1993 SUPERSEDES:
More informationSAFETY DATA SHEET ONE PART DIPPING EPOXY
SAFETY DATA SHEET ONE PART DIPPING EPOXY 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY: PRODUCT NAME: PART No.: SUPPLIER: ONE PART DIPPING EPOXY EER2136 H K WENTWORTH NZ LIMITED PO BOX
More informationREVISION MATERIAL SAFETY DATA SHEET
REVISION MATERIAL SAFETY DATA SHEET 1 PRODUCT AND COMPANY IDENTIFICATION Product Name: PRESEPT* Disinfectant Tablets PRESEPT* Disinfectant Granules Chemical Composition: Contains Sodium dichloroisocyanurate
More informationSAFETY DATA SHEET 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION 2. HAZARDS IDENTIFICATION
SAFETY DATA SHEET 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Identification Product Name: Koldmount Powder Resin Product Numbers: AM1201, AM1202, AM1204, AM1206 Company Identification Alpha
More informationMATERIAL SAFETY DATA SHEET (MSDS)
MATERIAL SAFETY DATA SHEET (MSDS) HEALTH: 2 FLAMMABILITY: 1 REACTIVITY: 1 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Name: Trade Name: Codes and colours: Manufacturer name: Ultraviolet light
More informationSAFETY DATA SHEET 5 Minute Epoxy I-FR Resin
SAFETY DATA SHEET 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING PRODUCT NAME SUPPLIER ITW DEVCON BAY 150 SHANNON INDUSTRIAL ESTATE SHANNON CO CLARE IRELAND T: +353 (0)61471299
More informationSAFETY DATA SHEET Loxeal Adesivo 34
Revision Date 25/01/2013 Revision 1 SAFETY DATA SHEET Loxeal Adesivo 34 SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1. Product identifier Product name Loxeal Adesivo
More informationPulpdent Corporation Revision Date: January 1, 2014
1.0 Commercial Product Name and Supplier 1.1 Commercial product name / designation Kool-Dam Heatless Liquid Dam & Block Out Resin 1.2 1.2.2 1.2.3 Application / Use SIC Use Category Dental material for
More information#1 Trincity Drive Trincity Industrial Estate Trincity Trinidad and Tobago 2. COMPOSITION/INFORMATION ON INGREDIENTS CAS CHEMICAL NAME % WEIGHT
MATERIAL SAFETY DATA SHEET CHEM STRIP Revision Number 4, Revision Date 10.01.14 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING Product Code HOU123BT Product Name CHEM STRIP
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET ELAN CHEMICAL COMPANY, INC Date Printed: October 23, 2007 Date Updated: December 1, 2005 1. Product /Company Identification Product Name: NATURAL ALDEFRESH Manufacturer: Elan
More informationEssential oils,sandalwood (cas ) MSDS
Click http//www.guidechem.com/cas-800/8006-87-9.html for suppliers of this product Essential oils,sandalwood (cas 8006-87-9) MSDS 1. 1.1 IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
More informationSAFETY DATA SHEET (91/155/EC) IDENTIFICATION OF THE SUBSTANCE /
SAFETY DATA SHEET (91/155/EC) 1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND THE COMPANY * Product name: BLACK BISON PASTE WAX * Supplier: LIBERON Mountfield Ind Est New Romney Kent, TN28 8XU Tel:
More information*** SAFETY DATA SHEET ***
*** SAFETY DATA SHEET *** 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING PRODUCT NAME ABLEBOND FS849-TI RECOMMENDED USE SUPPLIER Adhesive Henkel Limited Station Road Linton
More informationSafety Data Sheet ADDCURE 943S
Safety Data Sheet dated 9/3/2011, version 1 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product Identifier Mixture identification: Trade name: 1.2 Relevant identified
More informationMATERIAL SAFETY DATA SHEET 3M(TM) Scotch-Weld(TM) 2214 Hi-Temp New Formula Epoxy Adhesive 12/20/2007
Material Safety Data Sheet Copyright, 2007, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1)
More informationThis SDS adheres to the standards and regulatory requirements of Great Britain and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of Great Britain and may not meet the regulatory requirements in other countries. 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING
More information950 Pacific Highway 94 Apollo Drive, Albany
Page 1 of 7 3M AUSTRALIA PTY LIMITED 3M NEW ZEALAND LTD 950 Pacific Highway 94 Apollo Drive, Albany Pymble NSW 2073 Auckland, 0632 New Zealand Phone: 136 136 Phone: (9) 477 4040 24HR EMERGENCY: 1800 097
More informationSAFETY DATA SHEET according to OSHA HCS
Page 1 of 7 1. Identification Product identifier Application of the substance or the preparation Acid etchant for enamel and dentin Manufacturer/Supplier DEFEND by Mydent International 80 Suffolk Court
More informationSAFETY DATA SHEET ARALDITE RAPID STEEL HARDENER
1 4 REVISION DATE: September 2007 SDS NO.: 12758 SAFETY DATA SHEET 1 IDENTIFICATION OF THE SUBSTANCEPREPARATION AND OF THE COMPANYUNDERTAKING PRODUCT NAME PRODUCT NO. 80815 SUPPLIER 2 HAZARDS IDENTIFICATION
More information3M Canada Company 1840 Oxford Street East, Post Office Box 5757 London, Ontario N6A 4T1 Medical Emergency Telephone: (519) 451-2500, Ext. 2222 Transportation Emergency Telephone (CANUTEC): (613) 996-6666
More informationSAFETY DATA SHEET : KIWI SELECT -SMOOTH LEATHER- SELFSHINE CREAM
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product name Product code : : TH-KG80 Intended use : Product to maintain shoes. Supplier : BAMA INTERNATIONAL Pfalzgraf-Otto-Strasse 50 D-74821 MOSBACH Germany
More informationEMERGENCY PHONE: or (651) (24 hours)
Material Safety Data Sheet Copyright, 2004, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1)
More informationMaterial Safety Data Sheet Conforms to 91/155/EEC and ISO
Material Safety Data Sheet Conforms to 91/155/EEC and ISO 11014-4 POWDER SANITIZER/BAC 1000 Page 1 Issued: 4/12/2007 Revision. 1 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY Product
More informationDRYDEN AQUA LTD Safety Data Sheet 18
DRYDEN AQUA LTD Safety Data Sheet 18 According to Regulation (EC) No. 1907/2006 Date of compilation: 04/12/12 Print date: 03/02/13 Section 1 Identification of the substance/mixture and of the company/undertaking
More informationSPECTINOMYCIN DIHYDRCHLORIDE PENTAHYDRATE
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Chemical product name : Spectinomycin dihydrochloride pentahydrate Common chemical name : -- Synonyms : -- Chemical formula : C 14 H 24 N 2 O 7. 2HCl. 5H
More informationPulpdent Corporation Revision Date: May 7, 2014
1.0 Commercial Product Name and Supplier 1.1 Commercial product name / designation 1.2 1.2.2 Application / Use SIC 1.2.3 Use Category 1.3 Manufacturer Pulpdent Corporation 80 Oakland Street, P.O. Box 780
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET 1: Product and company identification Product Xcell Diesel Injection Cleaner XDIC Proper Shipping Name Xcell Diesel Injection Cleaner Hazard Class Recommended use Additive Clean
More informationMATERIAL SAFETY DATA SHEET
SECTION 1 - CHEMICAL PRODUCT & COMPANY IDENTIFICATION: MATERIAL SAFETY DATA SHEET Product Name: Sodium Bisulphite Solution, 38% Trade Name: Same Product Use: For the manufacture of perfume, Emergency Phone
More informationMATERIAL SAFETY DATA SHEET "READ AND UNDERSTAND MATERIAL SAFETY DATA SHEET BEFORE HANDLING OR DISPOSING OF PRODUCT"
1. PRODUCT AND COMPANY NAME PRODUCT CODE AND NAME DESCRIPTION Speciality Product COMPANY Chevron Products UK Limited 1 Westferry Circus Canary Wharf London E14 4HA United Kingdom Tel : 0044/20 77 19 3000
More informationSafety Data Sheet CITRA FORCE
Safety Data Sheet CITRA FORCE Section 1 - Chemical Product and Company Identification Supplier s Information: Superco Specialty Products 25041 Anza Drive Valencia, CA 91355 (661) 775-8877 Section 2 - Hazard
More informationSAFETY DATA SHEET 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF COMPANY.
SAFETY DATA SHEET Armillatox Limited The Colliery Industrial Estate Main Road Morton Alfreton Derbyshire DE55 6HL England Tel: +44(0)J773 590566 Fax : +44(0)1773 590681 DATE :- 1 st JUNE 2003 DATASHEET
More informationSAFETY DATA SHEET (Globally Harmonized System)
SAFETY DATA SHEET (Globally Harmonized System) SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifier BIO-MOS OA 1.2 Other means of identification 1.3
More informationSAFETY DATA SHEET Anglo Safe-T-Epoxy, Resin
SAFETY DATA SHEET 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING PRODUCT NAME SUPPLIER Anglo Building Products Ltd RUST-OLEUM UK Ltd Unit 6, Spitfire Close Coventry Business Park
More information: ProSpec Moisture Guard Max Part A
Date of issue: 07/04/2013 Revision date: 07/04/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Substance name :
More informationPulpdent Corporation Revision Date: May 6, 2014 Safety Data Sheet
1.0 Commercial Product Name and Supplier 1.1 Commercial product name / designation Ortho-Choice OBA Bonding Resin 1.2 1.2.2 1.2.3 Application / Use SIC Use Category Dental material for use by dental professional
More informationSAFETY DATA SHEET BRONZE PUTTY HARDENER
SAFETY DATA SHEET 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING PRODUCT NAME APPLICATION SUPPLIER Hardener ITW DEVCON BAY 150 SHANNON INDUSTRIAL ESTATE SHANNON CO CLARE IRELAND
More informationWARNING! FLAMMABLE. Keep away from open flame. WARNING! IRRITANT. May be irritating to skin and mucous membranes.
SAFETY DATA SHEET Health 1 Flammability 1 Reactivity 0 Protective Equipment B SECTION 1 PRODUCT AND COMPANY INFORMATION MANUFACTURER S NAME EMERGENCY TELEPHONE NUMBER Nueva Generacion Manufacturas S.A
More informationSAFETY DATA SHEET Safety Coat - Resin, Antibacterial
REVISION DATE: 2/0/200 SAFETY DATA SHEET 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING PRODUCT NAME SUPPLIER Watco UK limited Watco House Filmer Grove Godalming Surrey GU7
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Product Name: 1,6-HEXANEDIOL DIGLYCIDYL ETHER CAS No.: 16096-31-4 Brand: Alfa Chemistry Company:
More informationSAFETY DATA SHEET FILDEK FLEXIBLE DECK COATING HARDENER
SAFETY DATA SHEET 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING PRODUCT NAME INTERNAL ID APPLICATION SUPPLIER FILDEK405H/4 Component of epoxy coating system Don Construction
More information1.1 Commercial name: Bicaseal Putty (Activator) 1.2 Type of product: Sealing compound for power cable accessories
MATERIAL SAFETY DATA SHEET BICASEAL PUTTY (ACTIVATOR) ISSUE DATE: 31 ST July 2008 1 IDENTIFICATION OF SUBSTANCE 1.1 Commercial name: Bicaseal Putty (Activator) 1.2 Type of product: Sealing compound for
More informationSafety Data Sheet. according to Regulation (EU) No. 1907/ Identification of the substance/preparation and of the company/undertaking
Print date: 12.04.2011 MSDS: Page 1 of 5 1. Identification of the substance/preparation and of the company/undertaking MSDS-ID: Company/undertaking identification Company name: Street: Place: Fahltskamp
More informationSAFETY DATA SHEET STAINLESS STEEL PUTTY (ST) HARDENER.
SAFETY DATA SHEET 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING PRODUCT NAME PRODUCT NO. SUPPLIER X0046 ITW DEVCON BAY 150 SHANNON INDUSTRIAL ESTATE SHANNON CO CLARE IRELAND
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET Supplier ACCO Australia Pty. Ltd. Level 2, 8 Lord Street Botany NSW 2019 Phone: 02 9695 2500 Emergency Phone: 02 9695 2500 Monday to Friday, 9am to 5pm for general information
More informationSAFETY DATA SHEET DALER ROWNEY ALKYD GEL MEDIUM 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Product Name Supplier DALER-ROWNEY LTD, PEACOCK LANE, BRACKNELL, RG12 8SS, ENGLAND. Emergency tel : +44 (0) 1344 461000/ fax
More informationSafety Data Sheet 1511BR
Safety Data Sheet 1511BR 1 Material and Supplier Indentification Product Name: Description: Recommended use of the chemical and restrictions: Foaming Shampoo Carpet Shampoo Use only for the purpose on
More informationSAFETY DATA SHEET DALER ROWNEY 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Product Name Supplier DALER-ROWNEY LTD, PEACOCK LANE, BRACKNELL, RG12 8SS, ENGLAND. Emergency tel : +44 (0) 1344 461000/ fax
More informationMATERIAL SAFETY DATA SHEET ORCHID 196 Page 1(4) Date: 17 November 2004 MSDS Revision: 02 Date created: 12/07/02
The Soap Kitchen Unit 8 Caddsdown Industrial Park, Clovelly Road, Bideford, Devon, EX39 3DX Tel: 01237 420872 (+44 (0)1237 420872) Email: info@thesoapkitchen.co.uk ORCHID 196 Page 1(4) 1.Identification
More informationMATERIAL SAFETY DATA SHEET IS40 EJECTOR PIN LUBRICANT
1. Identification of the substance/mixture and of the company/undertaking 1Product identifier Trade name: Article number: IS40 Relevant identified uses of the substance or mixture and uses advised against
More informationMaterial Safety Data Sheet
1. Identification of Substance/Preparation and Company Product Name: Company: Chemical Name and Synonyms: For Information: In an Emergency: VESF MasonMate ETA Vinylester Harrison & Clough Ltd, P.O. Box
More information3M AVAGARD 9230 GENERAL HAND AND BODY WASH MSDS. Phone: Phone: (9) HR EMERGENCY: (Australia only).
3M AUSTRALIA PTY LIMITED 3M NEW ZEALAND LTD 950 Pacific Highway 250 Archers Road Pymble NSW 2073 Glenfield Auckland N.Z. Phone: 136 136 Phone: (9) 444 4760 24HR EMERGENCY: 1800 097 146 (Australia only).
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET SECTION 1. Identification of the Material and Supplier Product Name: Pine Disinfectant Recommended Use: Disinfectant and deodorize. Used at the rate of 1 part to 40 parts water.
More informationPulpdent Corporation Revision Date: January 1, 2014
1.0 Commercial Product Name and Supplier 1.1 Commercial product name / designation Lime-Lite Light-cured Cavity Liner 1.2 1.2.2 1.2.3 Application / Use SIC Use Category Dental material for use by dental
More informationSAFETY DATA SHEET. Issue Date: 05/25/2015 Version No: 1 1. Identification
Page 1 of 7 1. Identification Product identifier Application of the substance or the preparation Addition curing vinyl polysiloxane dental impression materials (consisting of Base & Catalyst) Manufacturer/Supplier
More informationobtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
3M Canada Company 1840 Oxford Street East, Post Office Box 5757 London, Ontario N6A 4T1 Medical Emergency Telephone: (519) 451-2500, Ext. 2222 Transportation Emergency Telephone (CANUTEC): (613) 996-6666
More informationEC safety data sheet. 1.) Identification of the substance/preparation and of the company/undertaking. 2.) Hazards identification
1.) Identification of the substance/preparation and of the company/undertaking Identification of the substance or preparation Trade name Zinc dust Use of the substance/preparation anti corrosive foundation,
More information1.2 Type of product: Sealing compound for power cable accessories. 1.4 Address: Oak Road, Wrexham Industrial Estate, Wrexham, LL13 9PH
MATERIAL SAFETY DATA SHEET BICASEAL PUTTY ISSUE DATE: 31 ST July 2008 1 Identification of the substance 1.1 Commercial Name: Bicaseal Putty 1.2 Type of product: Sealing compound for power cable accessories
More informationSAFETY DATA SHEET. SECTION 1: Identification of the substance/mixture and of the company/undertaking
SAFETY DATA SHEET SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Trade name or designation of the mixture Registration number - Synonyms Product
More informationSafety Data Sheet according to (EC) No 1907/ ISO
Safety Data Sheet according to (EC) No 1907/2006 - ISO 11014-1 Page 1 of 6 3880 Adhesive Electrically Conductive SDS no. : 168456 Revision: 12.06.2008 printing date: 04.05.2009 1. Identification of the
More informationSodium Xylene Sulfonate Acrylate Copolymer 0-5 N/A Fragrance < 0.5 N/A Water
EMERGENCY OVERVIEW PHYSICAL APPEARANCE: Clear Liquid IMMEDIATE CONCERNS: Eye & Skin irritant POTENTIAL HEALTH EFFECTS EYES: Irritating, and may injure eye tissue if not removed promptly. SKIN: Skin irritant
More informationMaterial Safety Data Sheet
Material Safety Data Sheet Conforms to ISO 11014:2009 VEGIE BAC 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY Product name : VEGIE BAC Product code : LC1 Use/description of product
More informationMATERIAL SAFETY DATA SHEET SECTION 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
MATERIAL SAFETY DATA SHEET SECTION 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Product Name: Eclipse Resin Materials (Baseplate, Set-Up and Contour Resin) Product Number:
More informationSAFETY DATA SHEET ULTIMEG 2220
Revision Date 07/11/2012 Revision 3 Supersedes date 02/02/2012 SAFETY DATA SHEET According to Regulation (EU) No 453/2010 According to Regulation (EC) No 1907/2006 According to EC Directive 2001/58/EC
More informationPulpdent Corporation Revision Date: May 1, 2017
1.0 Commercial Product Name and Supplier 1.1 Commercial product name / designation Ortho-Choice Ortho-Coat 1.2 1.2.2 1.2.3 Application / Use SIC Use Category Dental material for use by dental professional
More informationEMERGENCY PHONE MATERIAL SAFETY DATA SHEET MP5405/5430/5445 PART A (RESIN)
9411 Corsair Road Frankfort, IL 60423 1-800 - 552-0299 Phone 1-815 - 464-5650 Fax EMERGENCY PHONE 1-800 - 255-3924 MATERIAL SAFETY DATA SHEET MP5405/5430/5445 PART A (RESIN) HMIS HEALTH 2 FLAMMABILITY
More informationFrancotyp-Postalia GmbH Safety Data Sheet. according to 2001/58/EC. Ink Post Red. Print date : Page 1 of 5
Print date : 18.12.2006 Page 1 of 5 1. Identification of the substance/preparation and of the company/undertaking Product group : Ink Identification of the substance or preparation Use of the substance/preparation
More informationCRAFTSMART MOSAIC GROUT SEALER
1. Identification of Material and Supplier Product Name: Recommended Use: Supplier: Grout sealer CSA Trading Pty Ltd ABN: 86 124 105 004 Street Address: 21-23 Joseph St Blackburn North Victoria, 3130 Australia
More informationDocument id : Issue date : 01/20/2006 Version : 9.00 Supersedes date : 01/18/2006
3M Canada Company 1840 Oxford Street East, Post Office Box 5757 London, Ontario N6A 4T1 Medical Emergency Telephone: (519) 451-2500, Ext. 2222 Transportation Emergency Telephone (CANUTEC): (613) 996-6666
More informationCIPROXIFAN (cas ) MSDS
Click http//www.guidechem.com/cas-184/184025-19-2.html for suppliers of this product CIPROXIFAN (cas 184025-19-2) MSDS 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING Product
More informationSAFETY DATA SHEET ARALDITE RAPID RESIN
1 REVISION DATE: July 200 SDS NO.: 12820 SAFETY DATA SHEET 1 IDENTIFICATION OF THE SUBSTANCEPREPARATION AND OF THE COMPANYUNDERTAKING PRODUCT NAME PRODUCT NO. 80806, 80808, 808003 SUPPLIER BOSTIK LIMITED
More informationSAFETY DATA SHEET. Brick Kleen. Section 1: Identification of the substance/mixture and of the company/undertaking
SAFETY DATA SHEET Brick Kleen Section 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name: Brick Kleen Product code: 1.2. Relevant identified
More informationIngredient CAS Number Weight % ACGIH TLV PEL STEL Natural Enzymes Not Known 4-11 % Not established Not Established Not Established
Page 1 6 MSDS Document Product 1. Chemical Product and Company Identification Trade Name of this Product Manufacturer Natural Chemistry, Inc. 4 Richards Ave. Norwalk, CT 6854 Contact Name Tom Berry Phone
More informationSAFETY DATA SHEET R224 BRIGHT ZINC GALVE SPRAY
SAFETY DATA SHEET 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING PRODUCT NAME SUPPLIER Tygris Unit 31, Kyle Road Industrial Estate Irvine Scotland KA12 8LE 01294 311066 technical@tygrisindustrial.com
More informationSAFETY DATA SHEET. SECTION 1: Identification of the substance / mixture and of the company / undertaking.
SAFETY DATA SHEET According to Regulation (EC) No. 1907/2006 (REACH) and its amendments. Date of issue: 01.02.2017 Version number: 2.0 Date of verification: 01.02.2017 SECTION 1: Identification of the
More informationMATERIAL SAFETY DATA SHEET WILKINSONS GROUT CLEANER
MATERIAL SAFETY DATA SHEET WILKINSONS GROUT CLEANER 1. IDENTIFICATION OF THE PREPARATION AND THE COMPANY: SUBSTANCE NAME: Wilkinsons Grout Cleaner APPLICATIONS: Wilkinsons SUPPLIER: Business Park Abergele
More informationGutta Percha SAFETY DATA SHEET / MATERIAL SAFETY DATA SHEET Date of Preparation: April 10, 2014
Product Name: Synonyms: Product Use: Restrictions on Use: Manufacturer/Supplier: Section 1: IDENTIFICATION Therma-Kor TM Root canal therapy. Emergency Phone: 604-719-6977 Date of Preparation of SDS: April
More informationSAFETY DATA SHEET ARALDITE FUSION HARDENER
1 / 4 REVISION DATE: September 2007 SDS NO.: 16447 SAFETY DATA SHEET 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING PRODUCT NAME PRODUCT NO. 808300, 80840, 808416, 808423
More informationMaterial Safety Data Sheet SunClean Concrete Tile Cleaner
1. Production Description Product Name: Concrete Tile Cleaner Application of the substance: Cleaner Acid Based Manufacturer/Supplier: Sun Clean Cleaning Ind. LLC P.O. Box 41475, SHARJAH UAE Tel: +971 (6)
More informationDocument id : Issue date : 2015/05/11 Version : 1.00 Supersedes date : ---
3M Canada Company 1840 Oxford Street East, Post Office Box 5757 London, Ontario N6A 4T1 Medical Emergency Telephone: (519) 451-2500, Ext. 2222 Transportation Emergency Telephone (CANUTEC): (613) 996-6666
More informationMaterial Safety Data Sheet
IDENTIFICATION Material Safety Data Sheet Issue Date: July 02, 2013 Product Name: HY-CLOR ph INCREASER (Soda Ash) Classified as hazardous according to criteria of Worksafe Australia Product Name ph Increaser
More informationSAFETY DATA SHEET EVO-STIK EPOXY RAPID HARDENER
Revision Date September 2011 Revision 1 1 / 5 SAFETY DATA SHEET SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1. Product identifier Product name Product No. 808522,
More informationVersion 1.1 SDB_GB Revision Date Print Date Identification of the substance/mixture and of the company/undertaking
1. Identification of the substance/mixture and of the company/undertaking 1.1 Product identifier Trade name : 1.2 Relevant identified uses of the substance or mixture and uses advised against Use of the
More informationEMERGENCY PHONE: or (651) (24 hours)
Material Safety Data Sheet Copyright, 2009, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1)
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET ELAN CHEMICAL COMPANY, INC Date Printed: October 23, 2007 Date Updated: August 26, 2005 1. Product /Company Identification Product Name: NATURAL ACETIC ACID Manufacturer: Elan
More informationSAFETY DATA SHEET 274-EU, REV A Effective Date: March 2, 2005
Blue Ink (n Fluorescent) for Page: 1 of 6 SECTION 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Blue Ink for and DM800/900/1000 Reorder 620-1BI: DM400, DM500, DM550 Series
More information! Gutta Percha. Gutta Percha Not available. Root canal therapy. Not available. US Endodontics, LLC 309 Wesley Street Johnson City, Tn.
Gutta Percha Section 1: IDENTIFICATION Product Name: Synonyms: Product Use: Restrictions on Use: Manufacturer/Supplier: GHS INFORMATION Gutta Percha Root canal therapy. US Endodontics, LLC 309 Wesley Street
More informationDental City - VPS Putty SAFETY DATA SHEET
Issue Date: 2/5/207. Identification Page of 9 Product identifier Trade name: Dental City - VPS Putty 49-8008 Fast Set / 49-8006 Regular Set Application of the substance or the preparation Addition curing
More information