Anapurna M white G3 Ink SUBID: Version 2 Print Date

Transcription

1 SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Identification of the substance/preparation Product name MSDS Number Use of the Substance/Preparation Printer ink Company/Undertaking Identification Agfa Corporation 611 River Drive Center 3 Elmwood Park, NJ U.S.A. Transport Emergency Non-transportation Call CHEMTREC Health Emergency Phone International Agfa Information Phone SECTION 2. COMPOSITION/INFORMATION ON INGREDIENTS Printer ink, mainly consisting of CAS-No. Concentration [%] Propoxylated neopentyl glycol di >= <= 40.0 N-vinyl caprolactam >= <= 20.0 Titanium dioxide >= <= >= <= 20.0 Butylcarbamate Monomer >= <= >= <= Hydroxy-2- methylpropiophenone >= <= 5.0 SECTION 3. HAZARDS IDENTIFICATION The product as a whole has not been tested. This hazard information is for the individual ingredients. Emergency Overview REG_NOAM 1/11 EN

2 Form Liquid. Colour White. Odour Odourless. WARNING! Causes skin irritation. May cause allergic skin reaction. Causes eye irritation. Maybe Harmful if swallowed. Potential Health Effects Primary Routes of Entry Aggravated Medical Condition Eye contact. Skin contact. Inhalation of vapours or mists. Accidental ingestion. Persons with preexisting eye, skin or respiratory tract disorders may be more susceptible to the effects of this product. Acute health effects Inhalation Propoxylated neopentyl glycol di Inhalation of vapors is unlikely due to its low vapor pressure. However, if misted or handled at elevated temperatures, high concentrations may produce irritation and/or difficulty breathing. Titanium dioxide May be irritating to the mucous membranes and the respiratory tract 2-Hydroxy-2- methylpropiophenone Skin contact Propoxylated neopentyl glycol di with symptoms of coughing and nasal discharge. Can cause irritation to the upper respiratory tract. Can be irritating to the mucous membranes and respiratory tract with symptoms of coughing, sore throat and shortness of breath. May be irritating to the mucous membranes and the respiratory tract with symptoms of coughing and nasal discharge. May be irritating to the skin with symptoms of reddening and itching. May cause skin sensitization with symptoms of rash, itching, hives, and swelling. N-vinyl caprolactam May be irritating to the skin with symptoms of reddening and itching. Titanium dioxide Direct contact with dust may cause mechanical irritation. Can be irritating to the skin with symptoms of reddening, itching, and swelling. 2-Hydroxy-2- methylpropiophenone Eye contact Propoxylated neopentyl glycol di Can be irritating to the skin with symptoms of reddening, itching, and swelling. May be irritating to the skin with symptoms of reddening and itching. May cause slight eye irritation. REG_NOAM 2/11 EN

3 N-vinyl caprolactam Can be irritating to the eyes with symptoms of reddening, itching, stinging, and swelling. Titanium dioxide Direct contact with dust may cause mechanical irritation. 2-Hydroxy-2- methylpropiophenone Ingestion Can be irritating to the eyes with symptoms of reddening, itching, stinging, and swelling. Can be irritating to the eyes with symptoms of reddening, itching, stinging, and swelling. May be irritating to the eyes with symptoms of reddening, tearing and stinging. May be harmful if swallowed. Carcinogenicity The components of this product are not listed by NTP, IARC or regulated as a carcinogen by OSHA. Titanium dioxide IARC - Overall evaluation 2B Possible carcinogen. Classified as ACGIH TLV-A4, not classified as a human carcinogen agents which cause concern that they could be carcinogenic for humans but which cannot be assessed conclusively because of lack of data. SECTION 4. FIRST AID MEASURES Eye contact Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician. Skin contact Wash immediately with plenty of water and soap. If symptoms persist, seek medical advice. Ingestion Do not induce vomiting. Obtain medical attention. Inhalation Take person to fresh air. If necessary, seek medical advice. SECTION 5. FIRE-FIGHTING MEASURES Suitable extinguishing media Carbon dioxide (CO2). Foam. powder Dry sand. Specific hazards during fire Do not use a solid water stream as it may scatter and spread fire. fighting Special protective equipment for fire-fighters Firefighters should be equipped with self-contained breathing apparatus to protect against potentially toxic and irritating fumes. Additional advice Water mist may be used to cool closed containers. REG_NOAM 3/11 EN

4 SECTION 6. ACCIDENTAL RELEASE MEASURES Personal precautions See section Exposure controls / personel protection. Environmental precautions For waste disposal see section 13. Methods for cleaning up Dike the spill if necessary. Soak up with absorbent material. Collect large spills into a properly labelled and sealable container. Prevent release into the drain, soil or surface water. Additional advice If substance has entered a water course or sewer or contaminated soil or vegetation advise fire brigade or police. SECTION 7. HANDLING AND STORAGE Handling Advice on protection against fire and explosion Keep away from heat and sources of ignition. Storage Advice on common storage Store away from alkali. Store away from acids. Store away from strong oxidizing agents. Requirements for storage areas and containers Keep container tightly closed. Protect from direct sunlight. Protect from UV light. SECTION 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Exposure Limit Values (US) Components CAS-No. Values Type Revision Basis Date Titanium dioxide mg/m3 TWA ACGIH 15 mg/m3 PEL OSHA Z1 10 mg/m3 TWA 1989 OSHA Z1A Exposure Limit Values (CA) Components CAS-No. Values Type Revision Basis Date Titanium dioxide mg/m3 TWA CAD AB OEL 10 mg/m3 TWA CAD BC OEL 3 mg/m3 TWA CAD BC OEL 10 mg/m3 TWAEV CAD ON OEL 10 mg/m3 TWA OEL (QUE) 10 mg/m3 8 HR ACL CAD SK OEL 20 mg/m3 15 MIN CAD SK OEL ACL 10 mg/m3 TWA CAD MB OEL REG_NOAM 4/11 EN

5 Exposure controls Hygiene measures Employees should wash their hands and face before eating, drinking, or using tobacco products. Educate and train employees in the safe use and handling of this product. Emergency showers and eye wash stations should be available. Respiratory protection Under normal conditions of use, respirator protection is not required. If respirators are used, institute a program in accordance with OSHA standard 29CFR or Canada CSA Standard Z Hand protection Use chemical resistant gloves. In case of prolonged immersion or frequently repeated contact use gloves made of the materials butyl rubber (thickness >= 0.36 mm, breakthrough time > 480 min), nitrile rubber (thickness >= 0.38 mm, breakthrough time > 480 min) or neoprene (thickness >= 0.65 mm, breakthrough time > 240 min). For intermittent splash protection corresponding gloves with breakthrough times > 60 min can be used. Avoid gloves made of natural latex. Eye protection Safety glasses. SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES Form Liquid. Colour White. Odour Odourless. Relative density ph Not applicable Melting point/range < 0 C (< 32 F) Boiling point/range > 100 C (> 212 F) Flash point > 100 C (> 212 F) VOC content 0.02 % 0.2 g/l VOC content excluding water SECTION 10. STABILITY AND REACTIVITY Stability The product is stable under normal conditions of storage and use. Hazardous decomposition products Hazardous decomposition products Carbon monoxide (CO), Carbon dioxide (CO2). Conditions to avoid Avoid contact with strong oxidizing agents. Avoid contact with strong acids. Avoid contact with strong alkalis. SECTION 11. TOXICOLOGICAL INFORMATION Toxicity data specific for individual ingredients in their pure state REG_NOAM 5/11 EN

6 Acute oral toxicity Propoxylated neopentyl glycol di LD50 rat > 5,000 mg/kg Titanium dioxide LD50 rat > 10,000 mg/kg LD50 rat > 2,000 mg/kg Based on available data, the classification criteria are not met. LD50 rat > 2,000 mg/kg Acute inhalation toxicity Titanium dioxide LC50 rat > 6.8 mg/l/ 4 h An LC50/inhalation/4h/rat could not be determined because no mortality of rats was observed at the maximum achievable concentration. Acute dermal toxicity Titanium dioxide LD50 rabbit > 10,000 mg/kg Acute toxicity (other route) Skin irritation rabbit Irritating to skin. Skin irritation Draize Test REG_NOAM 6/11 EN

7 Eye irritation Sensitization Repeated dose toxicity Carcinogenicity Toxicity to reproduction rabbit No skin irritation No skin irritation Literature. Based on available data, the classification criteria are not met. rabbit Irritating to eyes. Eye irritation Draize Test rabbit No eye irritation No eye irritation Literature. Based on available data, the classification criteria are not met. May cause sensitization of susceptible persons. REG_NOAM 7/11 EN

8 Mutagenicity Teratogenicity Other information rat Application Route Oral Reproductive effects have been observed in animal studies. SECTION 12. ECOLOGICAL INFORMATION Elimination information (persistence and degradability) Biodegradation Titanium dioxide OECD 301D Readily biodegradable According to the results of tests of biodegradability this product is not readily biodegradable. > 70 % Physico-chemical removability Practically insoluble in water. May be separated mechanically in waste water plants. REG_NOAM 8/11 EN

9 Bioaccumulation Ecotoxicity effects Ecotoxicity data specific for individual ingredients in their pure state Toxicity to fish Titanium dioxide Species Leuciscus idus (golden orfe) LC0 > 1,000 mg/l/ 48 h Species Brachidanio rerio (zebra fish) LC50 1 to 10 mg/l/ 96 h Species Leuciscus idus (golden orfe) LC50 < mg/l/ 96 h Toxicity to daphnia Toxicity to algae Toxicity to bacteria Species Daphnia EC mg/l/ 48 h Species Daphnia magna (water flea) EC0 < mg/l/ 48 h Species Algae EC mg/l/ 96 h Species Algae EC50 < 100 mg/l/ 72 h Species Pseudomonas putida (bacteria) EC50 > 1,000 mg/l Species Bacteria EC50 > mg/l/ 17 h REG_NOAM 9/11 EN

10 SECTION 13. DISPOSAL CONSIDERATIONS Waste disposal methods Waste disposal should be in accordance with existing federal, state and local environmental control laws. Discharge to sewer may require approval of permitting authority and may require pretreatment. Empty containers. Recondition or dispose of empty container in accordance with governmental regulations. US. RCRA Hazardous Waste Classification (40 CFR 261) SECTION 14. TRANSPORT INFORMATION Not classified as dangerous in the meaning of transport regulations. SECTION 15. REGULATORY INFORMATION US. Toxic Substances Control Act (TSCA) Not on TSCA Inventory All components of this product are listed, or excluded from listing, on the United States Environmental Protection Agency Toxic Substance Control Act (U.S, EPA TSCA) inventory. US. SARA 311/312 Hazard Categories Acute Health Hazard. US. California Prop. 65 This product does not contain any chemicals known to State of California to cause cancer, birth defects or any other harm. State Right-to-Know Information The following chemicals are specifically listed by individual states. Other product specific health and safety data in other sections of the MSDS may also be applicable for state requirements. For details on your regulatory requirements you should contact the appropriate agency in your state. US. Massachusetts Commonwealth's Right-to-Know Law (Appendix A to 105 Code of Massachusetts Regulations Section ) CAS-No. Concentration [%] Titanium dioxide >= <= 20.0 US. New Jersey Worker and Community Right-to-Know Act (New Jersey Statute Annotated Section 345A-5) CAS-No. Concentration [%] Titanium dioxide >= <= 20.0 REG_NOAM 10/11 EN

11 US. Pennsylvania Worker and Community Right-to-Know Law (34 Pa. Code Chap ) CAS-No. Concentration [%] Titanium dioxide >= <= 20.0 US. Rhode Island Hazardous Substances Right-to-Know Act (R.I. Gen. Laws Section et. seq.) CAS-No. Concentration [%] Titanium dioxide >= <= 20.0 US. Massachusetts, New Jersey, Pennsylvania or Rhode Island Right to Know Substance Lists See Section 2. Canadian WHMIS Classification D2B Toxic Material Causing Other Toxic Effects Canadian Environmental Protection Act (CEPA) This product contains the following components listed on the Canadian NDSL list. All other components are on the Canandian DSL list. Butylcarbamate Monomer SECTION 16. OTHER INFORMATION US. HMIS Rating Health 2 Flammability 1 Reactivity 0 (0 = Minimal, 1 = Slight, 2 = Moderate, 3 = Serious, 4 = Severe) US. NFPA 704M Rating Health 1 Flammability 2 Reactivity 0 (0 = Insignificant, 1 = Slight, 2 = Moderate, 3 = High, 4 = Extreme) Agfa Corporation's method of hazard communication is comprised of Product Labels and Material Safety Data Sheets. HMIS and NFPA ratings are provided by Agfa Corporation as a customer service. This MSDS is replacing Agfa MSDS number 1831G.001 Section(s) changed compared to the previous issue 1, 11, 12, 16 REG_NOAM 11/11 EN