: Simplicte PolyDip Powders

Transcription

1 Date of issue: 24/04/2017 Revision date: : Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Product name : Simplicite PolyDip Powders Product code : Simplicte PolyDip Powders Type of product : Polymer Product group : Blend 1.2. Relevant identified uses of the substance or mixture and uses advised against Relevant identified uses Main use category Industrial/Professional use spec Function or use category : Professional use : For professional use only : Polymer Uses advised against 1.3. Details of the supplier of the safety data sheet NAIL SYSTEMS INTERNATIONAL 2 Union Hill Road W. Conshohocken, PA - UNITED STATES T or F Emergency telephone number Emergency number : Infotrac (800) Outside USA SECTION 2: Hazards identification 2.1. Classification of the substance or mixture Classification according to Regulation (EC) No. 1272/2008 [CLP] Skin Irrit. 2 Eye Irrit. 2 Skin Sens. 1 STOT SE 3 Full text of H-phrases: see section 16 H315 H319 H317 H Label elements Labeling according to Regulation (EC) No. 1272/2008 [CLP] Extra labelling to displayextra classification(s) to display Hazard pictograms (CLP) : Signal word (CLP) Hazard statements (CLP) Precautionary statements (CLP) GHS07 : Warning : H315 - Causes skin irritation H317 - May cause an allergic skin reaction H319 - Causes serious eye irritation H335 - May cause respiratory irritation : P261 - Avoid breathing dust P264 - Wash hands thoroughly after handling P271 - Use only outdoors or in a well-ventilated area P272 - Contaminated work clothing should not be allowed out of the workplace P280 - Wear face protection, protective gloves P302+P352 - IF ON SKIN: Wash with plenty of Wash off immediately with soap and plenty of water 24/04/2017 EN (English US) SDS Ref.: Simplicite Polydip Powders 1/6

2 2.3. Other hazards Adverse physicochemical, human health and environmental effects : May cause respiratory irritation. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. SECTION 3: Composition/Information on ingredients 3.1. Substance Not applicable 3.2. Mixture Name Product identifier % Classification according to Regulation (EC) No. 1272/2008 [CLP] Polyethyl methacrylate (CAS No) Not classified Polymethyl methacrylate (CAS No) Not classified Dibenzoyl peroxide (CAS No) (EC no) (EC index no) Silica (CAS No) (EC no) <1 Org. Perox. B, H241 Eye Irrit. 2, H319 Skin Sens. 1, H317 <0.5 Not classified May Contain: - Not classified CI (Titanium dioxide) (CAS No) (EC no) <2 Not classified Copolymer or Aluminum Copolymer <5 Not classified Mica (CAS No) <3 Not classified CI (Yellow 5) (CAS No) (EC no) CI (Red 7) (CAS No) (EC no) CI (Violet 2) (CAS No) (EC no) CI (CAS No) (EC no) CI (Iron Oxides) (CAS No) (EC no) CI (Blue 1) (CAS No) (EC no) CI (Red 30) (CAS No) (EC no) CI (CAS No) (EC no) CI (CAS No) (EC no) CI77742 (Manganese Violet) (CAS No) (EC no) CI (Red 27) (CAS No) (EC no) CI (Red 21) (CAS No) (EC no) CI (Red 40) (CAS No) (EC no) CI (Red 6) (CAS No) (EC no) Aluminum, 2-(2,3-dihydro-1,3-dioxo-1H-inden-2- yl)quinolinesulfonate 2-(2,3-dihydro-1,3-dioxosulfo-1H-inden-2- yl)quinolinesulfonate complexes - Yellow 10 - CI Full text of H-statements: see section 16 (CAS No) (EC no) SECTION 4: First aid measures 4.1. Description of first aid measures First-aid measures general First-aid measures after inhalation First-aid measures after skin contact First-aid measures after eye contact First-aid measures after ingestion : Call a poison center/doctor/physician if you feel unwell. : Remove person to fresh air and keep comfortable for breathing. Call a poison center/doctor/physician if you feel unwell. : Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash occurs: Get medical advice/attention. : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. : Call a poison center/doctor/physician if you feel unwell. 24/04/2017 EN (English US) SDS Ref.: Simplicite Polydip Powders 2/6

3 4.2. Most important symptoms and effects, both acute and delayed Symptoms/injuries after inhalation Symptoms/injuries after skin contact Symptoms/injuries after eye contact : May cause respiratory irritation. : Irritation. May cause an allergic skin reaction. : Eye irritation Indication of any immediate medical attention and special treatment needed Treat symptomatically. SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media : Water spray. Dry powder. Foam Special hazards arising from the substance or mixture Hazardous decomposition products in case of fire : Toxic fumes may be released Advice for firefighters Protection during firefighting : Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures For non-emergency personnel Emergency procedures For emergency responders Protective equipment : Ventilate spillage area. Avoid breathing dust/fume/gas/mist/vapors/spray. Avoid contact with skin and eyes. : Do not attempt to take action without suitable protective equipment. For further information refer to section 8: "Exposure controls/personal protection" Environmental precautions Avoid release to the environment Methods and material for containment and cleaning up Methods for cleaning up : Mechanically recover the product. Other information : Dispose of materials or solid residues at an authorized site Reference to other sections For further information refer to section 13. SECTION 7: Handling and storage 7.1. Precautions for safe handling Precautions for safe handling Hygiene measures : Use only outdoors or in a well-ventilated area. Avoid breathing dust/fume/gas/mist/vapors/spray. Avoid contact with skin and eyes. Wear personal protective equipment. : Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands after handling the product Conditions for safe storage, including any incompatibilities Storage conditions : Store locked up. Store in a well-ventilated place. Keep container tightly closed. Keep cool Specific end use(s) SECTION 8: Exposure controls/personal protection 8.1. Control parameters 8.2. Exposure controls Appropriate engineering controls Hand protection Eye protection Skin and body protection Respiratory protection Environmental exposure controls : Ensure good ventilation of the work station. : Protective gloves : Safety glasses : Wear suitable protective clothing : In case of insufficient ventilation, wear suitable respiratory equipment : Avoid release to the environment. 24/04/2017 EN (English US) SDS Ref.: Simplicite Polydip Powders 3/6

4 SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state Color Odor Odor threshold ph Relative evaporation rate (butyl acetate=1) Melting point Freezing point Boiling point Flash point Auto-ignition temperature Decomposition temperature Flammability (solid, gas) Vapor pressure Relative vapor density at 20 C Relative density Solubility Log Pow Viscosity, kinematic Viscosity, dynamic Explosive properties Oxidizing properties Explosion limits 9.2. Other information SECTION 10: Stability and reactivity Reactivity : Solid : Non flammable The product is non-reactive under normal conditions of use, storage and transport Chemical stability Stable under normal conditions Possibility of hazardous reactions No dangerous reactions known under normal conditions of use Conditions to avoid None under recommended storage and handling conditions (see section 7) Incompatible materials Hazardous decomposition products Under normal conditions of storage and use, hazardous decomposition products should not be produced. SECTION 11: Toxicological information Information on toxicological effects Acute toxicity Skin corrosion/irritation Serious eye damage/irritation Respiratory or skin sensitization Germ cell mutagenicity Carcinogenicity Reproductive toxicity Specific target organ toxicity (single exposure) Specific target organ toxicity (repeated exposure) Aspiration hazard : Causes skin irritation. : Causes serious eye irritation. : May cause an allergic skin reaction. : May cause respiratory irritation. 24/04/2017 EN (English US) SDS Ref.: Simplicite Polydip Powders 4/6

5 SECTION 12: Ecological information Toxicity Ecology - general : The product is not considered harmful to aquatic organisms or to cause long-term adverse effects in the environment Persistence and degradability Bioaccumulative potential Mobility in soil Results of PBT and vpvb assessment Other adverse effects SECTION 13: Disposal considerations Waste treatment methods Waste treatment methods : Dispose of contents/container in accordance with licensed collector s sorting instructions. SECTION 14: Transport information In accordance with ADR / RID / IMDG / IATA / ADN UN number Not regulated for transport UN proper shipping name Proper Shipping Name (ADR) Proper Shipping Name (IATA) Transport hazard class(es) ADR Transport hazard class(es) (ADR) IATA Transport hazard class(es) (IATA) Packing group Packing group (ADR) Packing group (IATA) Environmental hazards Dangerous for the environment Other information : No : No supplementary information available Special precautions for user - Overland transport No data available - Air transport No data available Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code Not applicable SECTION 15: Regulatory information Safety, health and environmental regulations/legislation specific for the substance or mixture EU-Regulations Contains no REACH substances with Annex XVII restrictions Contains no REACH candidate substance Contains no REACH Annex XIV substances. 24/04/2017 EN (English US) SDS Ref.: Simplicite Polydip Powders 5/6

6 National regulations Germany VwVwS Annex reference 12th Ordinance Implementing the Federal Immission Control Act - 12.BImSchV : Water hazard class (WGK) 3, strongly hazardous to water (Classification according to VwVwS, Annex 4) : Is not subject of the 12. BlmSchV (Hazardous Incident Ordinance) Netherlands SZW-lijst van kankerverwekkende stoffen SZW-lijst van mutagene stoffen NIET-limitatieve lijst van voor de voortplanting giftige stoffen Borstvoeding NIET-limitatieve lijst van voor de voortplanting giftige stoffen Vruchtbaarheid NIET-limitatieve lijst van voor de voortplanting giftige stoffen Ontwikkeling Denmark Classification remarks Recommendations Danish Regulation : Aluminum, 2-(2,3-dihydro-1,3-dioxo-1H-inden-2-yl)quinolinesulfonate 2-(2,3-dihydro-1,3- dioxosulfo-1h-inden-2-yl)quinolinesulfonate complexes - Yellow 10 - CI is listed : Aluminum, 2-(2,3-dihydro-1,3-dioxo-1H-inden-2-yl)quinolinesulfonate 2-(2,3-dihydro-1,3- dioxosulfo-1h-inden-2-yl)quinolinesulfonate complexes - Yellow 10 - CI is listed : None of the components are listed : None of the components are listed : None of the components are listed : Emergency management guidelines for the storage of flammable liquids must be followed : Young people below the age of 18 years are not allowed to use the product Chemical safety assessment No chemical safety assessment has been carried out SECTION 16: Other information Full text of H- and EUH-phrases: Eye Irrit. 2 Serious eye damage/eye irritation Category 2 Org. Perox. B Organic Peroxide Category B Skin Irrit. 2 Skin corrosion/irritation Category 2 Skin Sens. 1 Skin sensitization Category 1 STOT SE 3 Specific target organ toxicity (single exposure) Category 3 H241 Heating may cause a fire or explosion H315 Causes skin irritation H317 May cause an allergic skin reaction H319 Causes serious eye irritation H335 May cause respiratory irritation SDS EU (REACH Annex II) For EU Regulatory Inquiries, please contact: Biorius Rue de la Croyere 10A BE-7170 MANAGE Tel: Disclaimer: The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way coneected with the handling, storage, use or disposal of fthe product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. 24/04/2017 EN (English US) SDS Ref.: Simplicite Polydip Powders 6/6