RENALIN 100 Cold Sterilant Safety Data Sheet according to the Hazard Communication Standard (CFR ) HazCom 2012

Transcription

1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : RENALIN 100 COLD STERILANT RENALIN COLD STERILANT FOR DIALYSIS USE Product code : 1.2. Relevant identified uses of the substance or mixture and uses advised against Use of the substance/mixture : Reprocessing of Hemodialysis Dialyzers 1.3. Details of the supplier of the safety data sheet Medivators Inc th Avenue North Minneapolis, MN USA T Emergency telephone number Emergency number : SECTION 2: Hazards identification 2.1. Classification of the substance or mixture GHS-US classification Oxidizing liquid 1 Organic peroxide G Corrosive to metals 1 Acute toxicity 4 (Inhalation) Skin corrosion 1A Serious eye damage 1 Specific target organ toxicity - Single exposure Label elements GHS-US labelling Hazard pictograms (GHS-US) : Signal word (GHS-US) Hazard statements (GHS-US) Precautionary statements (GHS-US) GHS03 GHS05 GHS07 : Danger : May cause fire or explosion; strong oxidizer. May be corrosive to metals. Causes severe skin burns and eye damage. Harmful if inhaled. May cause respiratory irritation. May cause drowsiness or dizziness : Keep away from heat. Keep/Store away from clothing and other combustible materials. Take any precaution to avoid mixing with combustibles (metals, oxidizing materials, alkalis, caustics, chlorine, formaldehyde, salts, flammable organics). Keep only in original container. Use only outdoors or in a well-ventilated area. Do not breathe dusts or mists. Wash hands thoroughly after handling. Wear protective gloves/protective clothing/eye protection/face protection. In case of major fire and large quantities: Evacuate area. Fight fire remotely due to the risk of explosion. Absorb spillage to prevent material damage. If on skin (or hair): Rinse skin with water/shower. If on clothing: Rinse immediately contaminated clothing and skin with plenty of water before removing clothes. Wash contaminated clothing before reuse. Immediately call a poison center/doctor. If swallowed: Rinse mouth. Do NOT induce vomiting. Immediately call a poison center/doctor. If inhaled: Remove person to fresh air and keep comfortable for breathing. Immediately call a poison center/doctor. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison center/doctor. Store in corrosive resistant container with a resistant inner liner. Store in a wellventilated place. Keep container tightly closed. Store locked up. Dispose of contents/container in accordance with local/regional/national/international regulations Other hazards EN Rev A Date of issue: 2/19/2015 Revision date: 2/19/2015 Page 1/6

2 SECTION 3: Composition/information on ingredients 3.1. Substance Not applicable Mixture Name Product identifier % GHS-US classification Hydrogen peroxide (CAS No) Ox. Liq. 1 Acute Tox. 4 (Oral) Acute Tox. 4 (Inhalation) Skin Corr. 1A Acetic acid (CAS No) Flam. Liq. 3 Acute Tox. 4 (Dermal) Skin Corr. 1A Peroxyacetic acid (CAS No) Flam. Liq. 3 Org. Perox. D Acute Tox. 2 (Inhalation) Acute Tox. 4 (Oral) Acute Tox. 4 (Dermal) Skin Corr. 1A STOT SE 3 Stabilizer Proprietary Eye Dam. 1 Met. Corr. 1 * The specific chemical identity and exact percentage (concentration) of composition has been withheld as a trade secret in accordance with paragraph (i) of SECTION 4: First aid measures 4.1. Description of first aid measures First-aid measures after inhalation First-aid measures after skin contact First-aid measures after eye contact First-aid measures after ingestion : If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get immediate medical advice/attention. : In case of contact, immediately flush skin with plenty of water. Remove contaminated clothing and shoes. Wash clothing before reuse. Get immediate medical advice/attention. : In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. If easy to do, remove contact lenses, if worn. Get immediate medical advice/attention. : Do NOT induce vomiting. Rinse mouth. Never give anything by mouth to an unconscious person. Get immediate medical advice/attention Most important symptoms and effects, both acute and delayed Symptoms/injuries after inhalation : Harmful if inhaled. May cause respiratory irritation. Symptoms/injuries after skin contact : Causes severe skin burns. Symptoms may include redness, pain, blisters. Symptoms/injuries after eye contact : Causes serious eye damage. Symptoms may include discomfort or pain, excess blinking and tear production, with marked redness and swelling of the conjunctiva. May cause burns. Symptoms/injuries after ingestion : May be harmful if swallowed. May cause stomach distress, nausea or vomiting. May cause burns to the linings of the mouth, throat, and gastrointestinal tract Indication of any immediate medical attention and special treatment needed Symptoms may not appear immediately. In case of accident or if you feel unwell, seek medical advice immediately (show the label or SDS where possible). SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media Unsuitable extinguishing media : Water spray, dry chemical, foam, carbon dioxide. : Do not use water jet Special hazards arising from the substance or mixture Fire hazard : Products of combustion may include, and are not limited to: oxides of carbon, oxygen. Danger of developing toxic pyrolyse products. Explosion hazard : Heat may build pressure, rupturing closed containers, spreading fire and increasing risk of burns and injuries. This material increases the risk of fire and may aid combustion Advice for firefighters Protection during firefighting : Keep upwind of fire. Wear full fire fighting turn-out gear (full Bunker gear) and respiratory protection (SCBA). Use water spray to cool exposed surfaces EN Rev A Date of issue: 2/19/2015 Revision date: 2/19/2015 2/6

3 SECTION 6: Accidental release measures RENALIN 100 Cold Sterilant 6.1. Personal precautions, protective equipment and emergency procedures General measures : Use personal protection recommended in Section 8. Isolate the hazard area and deny entry to unnecessary and unprotected personnel. Remove ignition sources Methods and material for containment and cleaning up For containment : In case of accidental spillage, contain the spill and neutralize it with sodium bicarbonate or sodium carbonate. Use appropriate personal protection equipment (PPE). Methods for cleaning up : Scoop up material and place in a disposal container. Absorb spillage to prevent material damage. Provide ventilation. Do not reuse the liquid material Reference to other sections See section 8 for further information on protective clothing and equipment and section 13 for advice on waste disposal. SECTION 7: Handling and storage 7.1. Precautions for safe handling Additional hazards when processed Precautions for safe handling Hygiene measures : May be corrosive to metals. : Keep away from sources of ignition. Do not get in eyes, on skin, or on clothing. Do not breathe dust/fume/gas/mist/vapors/spray. Do not swallow. Handle and open container with care. Use only outdoors or in a well-ventilated area. When using do not eat, drink or smoke. Never return unused material to original container. : Launder contaminated clothing before reuse. Wash hands before eating, drinking, or smoking Conditions for safe storage, including any incompatibilities Technical measures : Proper grounding procedures to avoid static electricity should be followed. Storage conditions : Keep out of the reach of children. Keep container tightly closed. Keep only in the original container in a cool, well-ventilated place. Store away from other materials. Floor needs a protective coating against acid. Store at temperatures not exceeding 23.9 C (75 F). Protect from sunlight. Store locked up Specific end use(s) Not available. SECTION 8: Exposure controls/personal protection 8.1. Control parameters ACGIH ACGIH TWA (ppm) 1 ppm OSHA OSHA PEL (TWA) (mg/m³) 1.4 mg/m³ OSHA OSHA PEL (TWA) (ppm) 1 ppm Acetic acid ( ) ACGIH ACGIH TWA (ppm) 10 ppm ACGIH ACGIH STEL (ppm) 15 ppm OSHA OSHA PEL (TWA) (mg/m³) 25 mg/m³ OSHA OSHA PEL (TWA) (ppm) 10 ppm Peroxyacetic acid ( ) ACGIH ACGIH STEL (ppm) 0.4 ppm (inhalable fraction and vapor) OSHA Stabilizer (Proprietary) ACGIH OSHA Not applicable Not applicable Not applicable 8.2. Exposure controls Appropriate engineering controls Hand protection : Use ventilation adequate to keep exposures (airborne levels of dust, fume, vapor, etc.) below recommended exposure limits. Ensure that eyewash stations and safety showers are close to the workstation location. : Wear chemically resistant protective gloves EN Rev A Date of issue: 2/19/2015 Revision date: 2/19/2015 3/6

4 Eye protection Skin and body protection Respiratory protection Environmental exposure controls Other information : Wear approved eye protection (properly fitted dust- or splash-proof chemical safety goggles) and face protection (face shield). : Wear suitable protective clothing. Wear solvent resistant apron and boots for spills. : In case of insufficient ventilation, wear suitable respiratory equipment. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. : Maintain levels below Community environmental protection thresholds. : Do not eat, smoke or drink where material is handled, processed or stored. Wash hands carefully before eating or smoking. Handle according to established industrial hygiene and safety practices. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state : Liquid Appearance : Clear Color : Colorless Odor : Acidic Odor threshold ph : Relative evaporation rate (butylacetate=1) Melting point Freezing point Boiling point Flash point Auto-ignition temperature Decomposition temperature Flammability (solid, gas) : Not flammable Vapor pressure Relative vapor density at 20 C Relative density : Solubility Partition coefficient: n-octanol/water Log Pow Log Kow Viscosity, kinematic Viscosity, dynamic Explosive properties Oxidising properties : Strong oxidizer Explosive limits SADT : >60 C 9.2. Other information SECTION 10: Stability and reactivity Reactivity May cause or contribute to the combustion of other material generally by yielding oxygen. May be corrosive to metals Chemical stability Stable under normal storage conditions. Decomposes slowly to release oxygen Possibility of hazardous reactions No dangerous reaction known under conditions of normal use Conditions to avoid Heat. Sources of ignition. Incompatible materials EN Rev A Date of issue: 2/19/2015 Revision date: 2/19/2015 4/6

5 10.5. Incompatible materials Metals. Oxidizing materials. Alkalis. Caustics. Chlorine. Formaldehyde. Salts. Flammable organics Hazardous decomposition products May include, and are not limited to: oxides of carbon, oxygen. Do not mix with chlorinated products as this could liberate toxic corrosive chlorine gas. SECTION 11: Toxicological information Information on toxicological effects Acute toxicity : Harmful if inhaled. RENALIN 100 Cold Sterilant LC50 inhalation rat LD50 dermal rat LC50 inhalation rat Acetic acid ( ) Peroxyacetic acid ( ) LC50 inhalation mouse Stabilizer (Proprietary) Skin corrosion/irritation Serious eye damage/irritation Respiratory or skin sensitization Germ cell mutagenicity Carcinogenicity IARC group Reproductive toxicity Specific target organ toxicity (single exposure) > 2000 mg/kg > 2000 mg/kg >2.0 but 10.0 mg/l (Calculated using ATE values) 801 mg/kg 4060 mg/kg 2000 mg/kg 2 g/m³/4 h 3310 mg/kg 1060 mg/kg 1540 mg/kg 1410 µl/kg mg/l4/h 2400 mg/kg > 7940 mg/kg : Causes severe skin burns. : Causes serious eye damage. 3 - Not classifiable : May cause respiratory irritation. Specific target organ toxicity (repeated exposure) Aspiration hazard Symptoms/injuries after inhalation Symptoms/injuries after skin contact Symptoms/injuries after eye contact Symptoms/injuries after ingestion SECTION 12: Ecological information Toxicity Ecology - general : Harmful if inhaled. May cause respiratory irritation. May cause drowsiness and dizziness. : Causes severe skin burns. Symptoms may include redness, pain, blisters. : Causes serious eye damage. Symptoms may include discomfort or pain, excess blinking and tear production, with marked redness and swelling of the conjunctiva. May cause burns. : May be harmful if swallowed. May cause stomach distress, nausea or vomiting. May cause burns to the linings of the mouth, throat, and gastrointestinal tract. : Not considered to be harmful to aquatic life Persistence and degradability EN Rev A Date of issue: 2/19/2015 Revision date: 2/19/2015 5/6

6 12.3. Bioaccumulative potential RENALIN 100 Cold Sterilant RENALIN 100 Cold Sterilant Bioaccumulative potential Not established Mobility in soil Other adverse effects Effect on the global warming : No known ecological damage caused by this product. SECTION 13: Disposal considerations Waste treatment methods Waste disposal recommendations SECTION 14: Transport information : This material must be disposed of in accordance with all local, state, provincial, and federal regulations. The generation of waste should be avoided or minimized wherever possible. In accordance with DOT. UN-No.(DOT) : UN3149 Proper Shipping Name (DOT) : Hydrogen peroxide and peroxyacetic acid mixtures, stabilized Department of Transportation (DOT) Hazard : 5.1 (8) Classes Hazard labels (DOT) : Packing group (DOT) Additional information Other information Special transport precautions : II : No supplementary information available. : Do not handle until all safety precautions have been read and understood. SECTION 15: Regulatory information US Federal regulations All components of this product are listed, or excluded from listing, on the United States Environmental Protection Agency Toxic Substances Control Act (TSCA) inventory. Listed on the United States SARA Section 302 SARA Section 302 Threshold Planning Quantity (TPQ) Peroxyacetic acid ( ) Listed on the United States SARA Section 302 Listed on United States SARA Section 313 SARA Section 302 Threshold Planning Quantity (TPQ) 1000 (concentration >52%) 500 SARA Section Emission Reporting 1.0 % US State regulations RENALIN 100 Cold Sterilant State or local regulations This product does not contain a chemical known to the State of California to cause cancer, birth defects or other reproductive harm. SECTION 16: Other information Date of issue : 02/19/2015 Other information : None. Disclaimer: We believe the statements, technical information and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind. The information contained in this document applies to this specific material as supplied. It may not be valid for this material if it is used in combination with any other materials. It is the user s responsibility to satisfy oneself as to the suitability and completeness of this information for the user s own particular use EN Rev A Date of issue: 2/19/2015 Revision date: 2/19/2015 6/6