_Opti-Cide3 Surface Wipes_ _6_51003_.pdf. Made in the U.S.A. Manufactured in the U.S.A for:

Transcription

1 : Harmful if inhaled or absorbed through skin. Causes moderate eye _Opti-Cide3 _ _6_51003_.pdf

2 : Harmful if inhaled or absorbed through skin. Causes moderate eye

3 : Harmful if inhaled or absorbed through skin. Causes moderate eye

4 high-level disinfectant on any surface or instrument that (1) contact with the bloodstream or normally sterile areas of otherwise enter sterile areas of the body. This product may devices prior to sterilization or high-level disinfection. wipe in trash after use. Do not flush. Tightly close lid between uses to retain moisture. Container Disposal: Non-refillable container. Do not reuse or refill this empty container. Offer empty container for recycling. If recycling is not : Harmful if inhaled or absorbed through skin. Causes moderate eye irritation. Avoid breathing vapors and contact with eyes, skin or clothing. Wear appropriate personal protective equipment based on safe work practices. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco or using the toilet. Remove contaminated clothing Protection Devices Instrument Stands Medical Equipment Surfaces O tures Made in the OR U.S.A. Lights Painted Surfaces Chairs Surgical Equipment Surface ones X-ray Equipment 48% Glass LARGER Metal Plastics WIPES Clear Plastic Polycarb ropylene Polyvinylchloride (6"x10"compared Stainless to traditional Steel 6"x6.75") Brass Chrome Copper A (800) er Painted Coated Medical, Surfaces Dental Equipment Baked Surface Painted Disinfectant Surfaces Cleaner Glazed Tile Lam ces Computer Keyboards Counters Curing Lights Dental Equipmen tion Devices Instrument Stands Medical Equipment Surfaces Office Fi Lights Painted Surfaces Chairs Surgical Equipment Surfaces Telepho X-ray Equipment Glass Metal Plastics Clear Plastic Polycarbonate opylene Polyvinylchloride Stainless Steel Brass Chrome Copper Ac er Painted Coated Surfaces Baked Painted Surfaces Glazed Tile Lamin rfaces Computer Keyboards Counters Curing Lights Dental Equipme LABEL PLACEMENT - FPO es Eye Glasses Eye Protection Devices Eye Protection Devices Instru Medical Equipment Surfaces Office Fixtures OR Lights Painted Surf Surgical Equipment Surfaces Telephones X-ray Equipment Glass M cs Clear Plastic Polycarbonate Polypropylene Polyvinylchloride Sta Brass Chrome Copper Acrylic Powder Painted Coated Surfaces B Surfaces Glazed Tile Laminated Surfaces Computer Keyboards Co ng Lights Dental Equipment Surfaces Eye Glasses Eye Protection Dev Protection Devices Instrument Stands Medical Equipment Surfaces O Net Weight: 2.38 oz. (68 g) n-alkyl (60% C tures OR Lights Painted Surfaces 14, 30% C 16, 5% C Chairs 12, 5% C 18 ) dimethyl benzyl ammonium chloride... Surgical 0.154% Equipment Surface n-alkyl (68% C ones X-ray Equipment Glass 12, 32% C Metal 14 ) Net Contents: 10 Wipes dimethyl ethylbenzyl ammonium chloride... Plastics 0.154% Clear Plastic Polycarb Isopropanol % EPA Reg. No ropylene See back panel Polyvinylchloride for additional OTHER INGREDIENTS Stainless... Steel Brass % Chrome EPA Est. Copper No OH-001 A Precautionary Statements. TOTAL % Reorder 100ct: DOCW er Painted Coated Surfaces Baked Painted Surfaces Glazed Tile Lam rfaces Computer Keyboards Counters Curing Lights Dental Equipme Opti-Cide Surfaces Eye Glasses 3 Eye Protection DISPENSING non-porous Devices DIRECTIONS surfaces in areas where the disinfection of surfaces is required. wiping to thoroughly wet hard, non-porous surfaces. hard, non-porous surfaces at room temperature when used as directed: Staphylococcus aureus and Enterobacter aerogenes. non-porous surfaces at room temperature when used as directed: Mycobacterium bovis and Staphylococcus aureus. non-porous surfaces at room temperature when used as directed: Swine Influenza A Virus (H1N1). non-porous surfaces at room temperature when used as directed: Trichophyton ambulance, then give artificial respiration, preferably by mouth-to-mouth, if possible. If on Skin: Take off contaminated clothing. Rinse skin immediately with plenty of water for minutes. If in Eyes: Hold eye open and rinse slowly and gently with water for minutes. Remove contact lenses, if present, after the container or label with you when calling a poison control center or doctor, or going for treatment. You may also contact for emergency medical (01) Pull back re-sealable label located on top of pack top about 3/4 of the way. Do not completely remove the label from pack. Remove wipe. Reseal with label to prevent evaporation of solution. To prevent evaporation keep pack sealed when not in use. necessary until surfaces are visibly clean. For use as a hard, non-porous non-food contact surface disinfectant/virucide/fungicide: Pre-clean hard, non-porous surfaces to be disinfected with a clean wipe. Use a fresh, clean wipe to disinfect hard, non-porous surfaces until thoroughly wet. Allow surfaces to remain wet for 2 minutes at room temperature. non-porous surfaces with a clean wipe. Use a fresh, clean wipe to sanitize hard, non-porous surfaces until thoroughly wet. Allow surfaces to remain wet for 10 NEYD10CTW-71251A-0317 / A

5 NEYD10CTW-83793A-0317 / A Tuberculocidal / Virucidal *