Straumann Screw-retained Prosthetics
|
|
|
- Valerie Ford
- 6 years ago
- Views:
Transcription
1 Straumann Screw-retained Prosthetics
2 Straumann Screw-retained Abutments Straumann Screw-retained abutments Indication and product features Abutments for fixed screw-retained restorations; for multi-unit and single-unit restorations Available in different gingiva heights Available with different angulations Compatible with Straumann Bone Level Implants (for NC / RC) Round-off edges and steep abutment connector angle of 22 Same abutment connector geometry for all platforms to allow small component portfolio Design allows abutment-level impression Consistent Straumann colour coding
3 Abutment technical features Requirements for tilted implant type restorations Short connector H: 1.8mm Flat, Wide shoulder 0.3mm Wide angles 17, 30, 0 Multiple heights mm, 4mm, 1mm 1 2 BL diameters 4.6mm, 3.5mm only available for straight abutments // 2 diameter 3.5mm abutments only available in straight version
4 Abutment technical features Requirements for tilted implant type restorations Same connector design Allows limited coping portfolio Round-off edges 45 Steep abutment angle 22 Allows multi-unit and single unit restorations CrossFit connection For easy positioning 4
5 Abutment connector new features (example RC abutment, straight & angled, GH mm) New angulations: 17 & 30 Reduced abutment dimension Same connector geometry limited coping portfolio Connector allows multi-unit as well as single-unit restorations 4.6mm mm 1mm <2mm mm Multibase, straight Screw-retained abutment, straight Multibase, angled 25 Screw-retained abutment, angled 17 Screw-retained abutment, angled 30
6 Gingiva heights (angled abutments) NC/RC Ø4.6mm mm mm Screws (included in abutments and copings) Basal screw NC # RC # Occlusal screw #
7 Gingiva heights (straight abutments) NC Ø3.5mm NC/RC Ø4.6mm 4mm mm 1mm Screws (included in abutments and copings) Basal screw GH 1: # GH 2: # GH 3: # Occlusal screw # indication limitation: single unit only anterior (icentral/lateral incisors), crown/bridge incisors, canines and premolars
8 Limited Indications for NC 0º Ø3.5 & Ø4.6, GH 1.0mm Abutment Connection NC NC RC D Typ A B A B A B A B GH canines incisors canines incisors premolars premolars molars Indication of NC Implants molars Indication of NC Implants wisdom teeth Crown wisdom teeth Bar / Bridge
9 Copings Components for Straumann Screw-retained abutments Indication and product features Immediate temporization possible with Titanium copings Titanium copings allow production of temporary restoration to be placed in patient s mouth immediately Convert existing patient s denture into temporary restoration Polymer copings for burn-out techniques Bar copings for conventional final prosthesis
10 Technical features: Abutment connector design and copings Connector Geometry Straight and angled abutments with same abutment connector geometry limited coping portfolio Ø 3.5mm Ø 4.6mm NC NC RC * * * * Same copings for straight / angled abutments D 4.6mm Same copings for straight abutments D 3.5mm Multi-unit/single unit restoration Engaging/non-engaging feature integrated in copings Total 5 copings *available as engaging and nonengaging Engaging Total 5 copings *available as engaging and nonengaging Non-Engaging 10
11 Technical features: Abutment connector design and copings Compared to the current Multibase coping portfolio the new coping portfolio for Straumann Screw-retained abutment is limited thanks to the new connector geometry RC Multibase RC Screw-retained abutment Straight, Ø4.5mm Angled, Ø4.0mm Straight, Ø4.6mm Angled, Ø4.6mm Non-engaging engaging 11
12 Technical Feature: Screw-in-screw concept Straight abutments have a screw-inscrew-concept: The occlusal screw is screwed into the basal screw For reduced height of the restoration Both screws to be used with the SCS screwdriver #
13 Impression Taking Components for Straumann Screw-retained abutments Indication and product features Impression taking on abutment-level: either traditional or via scanbodies Traditional impression-taking On abutment-level Open tray or closed tray For both diameters: Ø3.5 / Ø4.6mm Reflects existing Straumann colour coding Scanbodies Base for digitally processing CARES hybrid bars and wrap around bars (via dental models) For scanning on abutment-level Internal geometry reflects Screw-retained abutment design For both diameters: Ø3.5 / Ø4.6mm Material PEEK
14 New Impression components compared to Multibase , open tray impression post same design, same material same procedure , open tray impression post , closed tray impression post, plastic post to be snapped onto abutment , closed tray impression post, Metal post screwed onto abutment, plastic positioning cap
15 Bar copings - dimensions Ø 3.5mm Ø 4.6mm NC NC RC SKU: SKU: (same for NC and RC 4.6mm) 15
16 Protective caps - dimensions Ø 3.5mm Ø 4.6mm NC NC RC SKU: /.2324 /.2325 (available in V4) SKU: /.4324 /.4325 (same for NC and RC 4.6mm) 3 different heights: 5mm / 6.5mm / 8mm 3 different heights: 5.1mm / 6.6mm / 8.1mm 16
17 Comparison Nobel Biocare Multi-unit Abutment and Straumann Screw-retained Abutment Straumann Nobel Biocare Straight Angled Straight Angled Abutment Design Implant Diameters BL: NC Ø 3.5mm NC Ø 4.6mm RC Ø 4.6mm BL: NC Ø 3.5mm NC Ø 4.6mm RC Ø 4.6mm Different abutments for: - external connection (Branemark / Nobel Speedy Groovy) - Internal conical connection (Nobel Active / Replace) - Internal Three-Part connection (Nobel Replace / Replace Select / Nobel Speedy Replace) Angulations 0 17 / / 30 Gingiva Heights 1,, 4mm, 4mm 1-5mm depending on implant type Auxiliary Portfolio Abutment Connector Design Due to abutment connector design, same copings for straight and angled abutments 2-5mm depending on implant type Different copings for angled and straight abutments Connector Height 1.8mm 1.8mm <2mm <2mm 17 Abutment Connector Angle 22 22, plus round off edges 45 Shoulder Flat and 0.3mm wide Flat and 0.3mm wide flat flat
18 Who is who in the new Straumann Screw-retained abutment portfolio Multibase NC Ø3.5 NC Ø4.0 RC Ø4.0 NC Ø4.5 RC Ø4.5 RC Ø , Type A/B 25, Type A/B Gingiva Heights 1 4 Screwretained Abutment NC Ø3.5 NC Ø4.6 RC Ø4.6 NC Ø4.6 RC Ø / 30 A/B 17 / 30 A/B Copings 18 NC Ø3.5 NC/RC Ø4.6, due to the new abutment connector geometry, the new copings are not compatible with Multibase abutments
19 Who is who in the new Straumann Screw-retained abutment portfolio - Copings Multibase NC Ø3.5 NC Ø4.0 RC Ø4.0 NC Ø4.5 RC Ø4.5 RC Ø6.5 Copings 0 25, Type A/B 25, Type A/B Bridge Gold Bridge Polymer Bar Gold Bar - Polymer Screwretained Abutment NC Ø3.5 NC Ø4.6 RC Ø4.6 NC Ø4.6 RC Ø / 30 A/B 17 / 30 A/B 0 0 Copings Titanium engaging Titanium non-eng. Titanium 19 Bar Polymer engaging Polymer non-eng
20 Product Portfolio for new Screw-retained Prosthetics Planning Guide 20
21
Straumann Dental System Indication-based prosthetic workflow. Technical Information
Straumann Dental System Indication-based prosthetic workflow Technical Information Contents Tissue Level Single Crown Screw-retained 2 Tissue Level Single Crown Cement-retained 4 Tissue Level Bridge Screw-retained
» For multi-unit restorations -
» For multi-unit restorations - conventional or digital «Multi-Unit Abutments 2 The Multi-unit product range is being contiunally expanded to include other abutment series. Available for a large number
Stock Prosthetic Guide 2014
Stock Prosthetic Guide 2014 Straumann Variobase Versatile & Cost-effective Abutment Solution The new Straumann Variobase Abutment delivers a highly cost-effective solution for screw or cement-retained
Ø Smaller and Stronger.
Ø 2.75 Smaller and Stronger. JD ICON ULTRA.S SMALLER AND STRONGER Ø 2.75 JDIcon Ultra S is a two-piece implant with 2.75mm diameter and internal conical connection. It is the smallest implant with internal
Straumann Variobase for Bridge/Bar
Straumann Variobase for Bridge/Bar Are you ready to take the next step to grow your business? By the year 2020, it is estimated that some 38 million adults in the U.S. will be in need of 1 or 2 complete
PROSTHETIC EFFICIENCY. Straumann Variobase Beyond a common Ti-base. Efficiency and flexibility in balance.
PROSTHETIC EFFICIENCY Straumann Variobase Beyond a common Ti-base. Efficiency and flexibility in balance. 2 Straumann Variobase Satisfy individual patient needs in the most efficient way Balance restorative
Ø Smaller and Stronger.
Ø 2.75 Smaller and Stronger. JD ICON ULTRA.S SMALLER AND STRONGER Ø 2.75 JDIcon Ultra S is a two-piece implant with 2.75mm diameter and internal conical connection. It is the smallest implant with internal
PROSTHETIC EFFICIENCY. Straumann Angled Solutions (AS) Flexibility and precision from a different angle
PROSTHETIC EFFICIENCY Straumann Angled Solutions (AS) Flexibility and precision from a different angle ORIGINAL Leverage the precise fit and the quality of the original Straumann connection 2 Straumann
Bridging the Gap Between Original and Multi-Platform Systems.
Product Information Straumann CARES Screw-Retained Bars & Bridges Bridging the Gap Between Original and Multi-Platform Systems. CARES SRBB solutions are compatible with the following implant systems: Neodent
Product Information. Straumann Variobase Beyond a common Ti-base. Efficiency and flexibility in balance. The NEW. Variobase family members
Product Information Straumann Variobase Beyond a common Ti-base. Efficiency and flexibility in balance. The NEW Variobase family members Straumann Variobase for Crown AS Angled Solution Straumann Variobase
Step-by-Step Cemented Bridge Using Using CPK Abutments. Internal Hex. Implant System
4. 6. Step-by-Step Cemented Bridge Using Using CPK Abutments Internal Hex. Implant System MIS Corporation. All rights reserved. Published by MIS, which reserves the right to ameliorate the products described
INSTRUCTIONS FOR THE DENTIST. synocta impression procedure, Screw-retained and Snap-on. Screw-retained (Open tray) Snap-on (Closed tray)
INSTRUCTIONS FOR THE DENTIST synocta impression procedure, Screw-retained and Snap-on Screw-retained (Open tray) Snap-on (Closed tray) click 1. Attach synocta Impression caps to implants. Hand-tighten
QZ-Implant TRINON. Bone level implant with hexagonal internal cone connection
QZ-Implant Information Components are updated periodically, check with your local Trinon partner on current models Please follow Instructions for Use for individual components Images are not to scale see
Abutments for all indications. Individualized CAD/CAM and prefabricated implant restorations
Abutments for all indications. Individualized CAD/CAM and prefabricated implant restorations 2 Abutments for all indications Comprehensive and effective the Nobel Biocare abutment portfolio. The Nobel
ß For cement-retained crowns and bridges. Note: synocta cementable abutments. ß Can be especially helpful with large multi-unit cases Note:
Choosing the correct Straumann abutment for crowns, bridges, and bars Straumann abutments are torqued to 35 Ncm by using the ratchet with torque control device and the appropriate abutment driver. Abutments
BONE LEVEL ABUTMENTS. on4. multi-unit
BONE LEVEL 2016 on4 multi-unit STANDARD CONNECTION STANDARD connection means that connection between implant and the abutment will be established on the platform of the implant instead of conical switching.
Product Catalog 2017/2018. Straumann International Edition
Product Catalog 2017/2018 Straumann International Edition Note A list of abbreviations can be found on the reverse of this fold-out page. List of abbreviations -04 Pack of 4 ABS ADLC Al AS BL BLT EDTA
Intraoral Library INSTRUCTIONS FOR USE DYNAMIC ABUTMENT SOLUTIONS LIBRARY INST_EXOCAD_INTRAORAL_01_2017_01_EN. scan
Intraoral Library INSTRUCTIONS FOR USE DYNAMIC ABUTMENT SOLUTIONS LIBRARY scan INST_EXOCAD_INTRAORAL_01_2017_01_EN INTRODUCTION When starting the Exocad Dental DB program, it will appear the following
Part 2: Internal Tri-Channel Connection. Nobel Biocare Compatible Components. Tri-Channel Internal Connection Implants
Select Part 2 Internal Tri-Channel Connection Replace Select NobelSpeedy Replace NobelReplace and compatible implants listed below Select Part 2 contains only the Tri-Channel Internal Connection compatible
3D-Guide. Scanbody for high-precision implant position transfer INTERNATIONAL PATENT BENEFITS: APPLICATION: TECHNICAL DETAILS:
3D-Guide Scanbody for high-precision implant position transfer exact positioning by metal interface conceived for intra-oral scanners the different shape geometry ensured in case of incomplete scanning
Product Chart. TOOLS The OSPOL tools fits with all components and both implant diameters. Ø 4,0 mm. Ø 3,35 mm DRILL KIT IMPLANT INSERTER
Product Catalogue 1 Product Chart Follow the lines to see which products that fits both diameters and which that are special. In true OSPOL philosophy, most of the instruments and abutments fits both diameters.
Type 1. Type 2. Straumann Bone Level. The L-Series abutments are compatible with» L-SERIES «
The L-Series abutments are compatible with L-SERIES «Bone Level DETAILED VIEW Exact view of the direction of the angulation (indexing) of all angled abutments. Type 1 angled over flat Type 2 angled over
Straumann Variobase Family. More than treatment flexibility. Driving efficiency in your lab.
Straumann Variobase Family More than treatment flexibility. Driving efficiency in your lab. More than flexibility. The most efficient way to your restoration. Today s laboratory needs solutions that are
» Prosthetic Options by MEDENTiKA «
» Prosthetic Options by MEDENTiKA «IPS Implant Systems MICROCONE QUATTROCONE MEDENTiKA offers a wide range of abutments for prosthetic needs in implant dentistry. In addition the compatibility of abutments
For technical assistance: Tel Working time: 8.30 am pm
I For technical assistance: Tel. +39 059 392827 Working time: 8.30 am - 5.30 pm Index JD Digital solutions for Intraoral Scanning JD Implant Libraries JD Guided Surgery Kit JD Surgical Guide and 3D Model
Very small abutment head easy and secure handling. Ankylos. The SmartFix concept. Prosthetic solution on angled implants
Very small abutment head easy and secure handling Ankylos The SmartFix concept Prosthetic solution on angled implants Stable prosthetic fit The area supporting the prosthesis is extended distally by the
Basic information on. Fixed edentulous solutions Treatment guide
Basic information on Fixed edentulous solutions Treatment guide 1 Contents Your removable and fixed edentulous treatment portfolio 2 More than a fixed rehabilitation. A smart solution with reduced complexity.
MICRODENT EXTERNAL CONNECTION PRODUCTS GUIDE EXTERNAL CONNECTION IMPLANTS IMPLANTOLOGY SYSTEMS. Product presentation. Digital information
Product presentation Digital information IMPLANTOLOGY SYSTEMS EXTERNAL CONNECTION PRODUCTS GUIDE www.microdentsystem.com Implant catalogues SYSTEM UNIVERSAL Implantes de conexión externa Other catalogues
TRINON. Index. Index. Overview Page 4. Catalogue
QK-Implant Information Components are updated periodically, check with your local Trinon partner on current models Please follow Instructions for Use for individual components Images are not to scale see
Abutment level impression Ⅰ. Combi abutment/dual abutment Multi units
Pr osthetic par t Abutment level impression Ⅰ Combi abutment/dual abutment Multi units Prosthetic part Remove Cover screw Prosthetic part Remove Healing abutment Prosthetic part Select suitable Combi abutment,
The solution for the edentulous patients. Prosthetics compatibillity 3i Multi-unit Abutment Regular Abutment (MegaGen)
The solution for the edentulous patients Various s Straight Type : 2, 3, 4, 5mm Angled Type : 1, 2, 3, 4mm Prosthetics compatibillity 3i Regular Abutment (MegaGen) Various Angles Straight, 17, 29 Design
isy indications and techniques
This is isy 3 The isy Implant System demonstrates its unique talents in numerous indications. Its intelligence allows the clinician to focus on what is most common in their everyday implant practice. isy
Straumann Variobase Family. More than treatment flexibility. Driving efficiency in your lab.
Straumann Variobase Family More than treatment flexibility. Driving efficiency in your lab. More than ample flexibility. The most efficient way to your restoration. Straumann Variobase offers you a variety
N-SERIES. compatible to: Straumann / SynOcta 32 NT-TRADING CATALOGUE PLATFORM 3,5 mm NN 4,8 mm RN 6,5 mm WN TITANIUM BASE SCAN BODY 3D-GUIDE
PLATFORM 3,5 mm NN 4,8 mm RN 6,5 mm WN TITANIUM BASE for individual milled Zirconium Abutment N 800 N 810 N 820 SCAN BODY 3D-GUIDE for intra + extra oral scanning N 9.S3D3.500 N 9.S3D4.800 N 9.S3D6.500
24 About us Sincerely. Content SCREW SELECTION GUIDE
CATALOGUE 2018/1 Content info GENERAL INFO 4 PRODUCT LIST FITS 22 EXTERNAL HEX UNIVERSAL NOBEL BRÅNEMARK 24 About us TRILOBE NOBEL REPLACE 28 2018 is a very special year for Terrats Medical. 10 years ago
Multi-Unit Abutment Guide
Multi-Unit Abutment Guide SpiralTech TM Screw-Retained & Multi-Unit Restorations Our multi-unit abutment system is designed for restoration of both partially or fully edentulous arch cases Straight Multi
Multi-Unit Abutment System SIC Safe on Four. Optimum use of available bone by angled placement of implants
Multi-Unit Abutment System SIC Safe on Four Optimum use of available bone by angled placement of implants Multi-Unit Abutment System SIC Safe on Four Safe on Four The SIC Safe on Four system is a further
User Manual Complete Prosthetic Kit (CPK)
User Manual Complete Prosthetic Kit (CPK) The Complete Prosthetic Kit is designed to enable easy impression and transfer technique and to prevent the need to remove and to re-tighten the abutments. Advantages
Osteotome inserts kit, angled. Impression tube (open tray) Selection abutment kit / Selection measurement post. Bar base PMMA & Finisher
Osteotome inserts kit, angled Impression tube (open tray) Locator system Selection abutment kit / Selection measurement post Bar base PMMA & Finisher Titaniumbase for CAD/CAM, long Clue support Locator
Restoring Straumann implants. with Locator abutments.
Restoring Straumann implants with Locator abutments. 1 1 Straumann is the industrial partner of the ITI (International Team for Implantology) in the areas of research, development, and education. Contents.
INDEX. Pag. 12. Pag. 05. Pag. 06. Pag. 13. Pag. 06. Pag. 14. Pag. 15. Pag. 15. Pag. 15. Pag. 15. Pag. 08. Pag. 16. Pag. 09. Pag.
PROSTHESIS MANUAL INDEX PRESENTATION Pag. 05 CEMENT-SCREWED PROSTHESIS Pag. 12 INTRODUCTION PROSTHESIS MANUAL WARNINGS Pag. 06 Pag. 06 IMPRESSION TAKING: NECESSARY MATERIAL PROSTHESIS: NECESSARY MATERIAL
What s New. CARES Visual 12.1
What s New CARES Visual 12.1 Table of contents New Products and Workflows for centralized and in-house production....3 New Software Workflows...12 New Country-specific updates 14 Tips and Tricks..17 2
UFII : Unique Fixture, 2 nd Generation. UFII Design Characteristics
UFII : Unique Fixture, 2 nd Generation UFII Design Characteristics 1. Hybrid SLA Surface Treatment 2. Tapered-Straight Combined Shape 3. Hex Internal Connection 4. Dual Morse Tapered Connection (11 Morse)
INTERNAL HEXAGON PROSTHETIC OPTIONS. MIS Corporation. All Rights Reserved.
INTERNAL HEXAGON PROSTHETIC OPTIONS MIS Corporation. All Rights Reserved. MIS offers a wide range of prosthetic options designed to meet all prosthetic needs and working methods. Abutments come in various
S-SERIES. compatible to: DENTSPLY Implants / Astra Tech Implant System OsseoSpeed TX. PLATFORM 3,5 / 4,0 mm 4,5 / 5,0 mm TITANIUM BASE
TITANIUM BASE for individual milled Zirconium Abutment S 800 S 820 SCAN BODY 3D-GUIDE for intra + extra oral scanning S 9.S3D3.540 S 9.S3D4.550 LAB ANALOG S 50 S 52 IMPLANT PICK-UP for open-tray with integrated
More than a Ti-base. Your trusted link between implant and restoration. Straumann Variobase C. Variobase for CEREC becomes Variobase C
Straumann Variobase C Variobase for CEREC becomes Variobase C NOW available in Sirona software More than a Ti-base. Your trusted link between implant and restoration. More than owning the whole value chain.
InterActive System CONICAL. Prosthetic Catalog. simplycrown & bridge SMART PACK. InterActive All-in-1 Packaging simplyinteractive Mount-Free
InterActive System Prosthetic Catalog simplycrown & bridge SMART PACK InterActive All-in-1 Packaging simplyinteractive Mount-Free CONICAL Cover Screws, Healing Collars & Transfers Replacement Surgical
The Multi-unit Abutments of the CE-Series are indicated for Nobel Biocare / NobelReplace Tapered. The current implant diameters have to be attended.
Instructions for Use Multi-Unit Abutment with Screw Description: Multi-Unit Abutment with screws for series CC-Series, CE-Series, CV- Series, CF-Series, CH-Series, CK-Series, CL-Series, CN-Series, CR-Series,
1 mm 2 mm 3 mm 4 mm 5 mm 6 mm
Novaloc The Straumann Novaloc Retentive System is intended for use with removable hybrid dentures that are retained solely by endosteal implants in the mandible or maxilla*. The Novaloc components offer
STRAUMANN DENTAL IMPLANT SYSTEM RESToRATIVE SELECTION GUIDE
STRAUMANN DENTAL IMPLANT SYSTEM RESToRATIVE SELECTION GUIDE The ITI (International Team for Implantology) is academic partner of Institut Straumann in the areas of research and education. RESTORATIVE SELECTION
NobelEsthetics. Introduction page 4. Temporary implant restorations page 6. Solutions for existing teeth page 14. Final implant restorations page 26
NobelEsthetics PROCEDURES MANUAL Introduction page 4 Temporary implant restorations page 6 Solutions for existing teeth page 14 Final implant restorations page 26 Overdenture solutions page 67 Appendices
STRAUMANN DENTAL IMPLANT SYSTEM RESToRATIVE SELECTION GUIDE
STRAUMANN DENTAL IMPLANT SYSTEM RESToRATIVE SELECTION GUIDE The ITI (International Team for Implantology) is academic partner of Institut Straumann in the areas of research and education. RESTORATIVE SELECTION
US Implant System 2013 PROSTHETIC PROCEDURE
US Implant System 2013 PROSTHETIC PROCEDURE Contents TS Implant System Cement retained restoration 06 Cement retained bridges with the Cement abutment system 18 Cement retained crown with the Angled abutment
SIC invent. SIC P2F Abutment Dr. Galip Gurel From the gingiva shaper to a provisional crown to the final aesthetic restoration
SIC invent SIC P2F Abutment Dr. Galip Gurel From the gingiva shaper to a provisional crown to the final aesthetic restoration SIC P2F Abutment Dr. Galip Gurel P2F PROVISIONAL 2 FINAL From the gingiva shaper
TruAbutment Digital Solutions
TruAbutment Digital Solutions CEREC Solution TruAbutment Inc. 17742 Cowan Irvine, CA 92614 cerec@truabutment.com T : 714. 956.1488 F : 714. 956. 1491 truabutment.com Tru Scan Post Kit Tru Scan Post GH
The intelligent system.
The intelligent system. Contents This is isy The intelligent system 5 Cost efficient implant sets 7 Total flexibility 9 Purposeful simplicity 11 The digital future 13 Quality without compromise 15 isy
INTRODUCTION. Why Choose Cortex Prosthetics?
Prosthetic Manual 4 INDEX Introduction 6-14 Impression Techniques 15-29 Abutments Selection Handling 30-33 Temporary Restorations 34-38 Screw Reiained Restorations 39-52 Removable Restorations 53-63 5
NEW IMPLANT PLATFORMS AVAILABLE NewJANUARY 2018
NEW IMPLANT PLATFORMS AVAILABLE NewJANUARY 2018 Nobel Replace Uni Abutment 20 Uni Abutment 45 Camlog Bar Abutment COMPATIBLE TO: COMPATIBLE TO: Available January 2018 Available January 2018 Camlog Bar
Leading material offering and application range. Straumann CARES CADCAM
Leading material offering and application range Straumann CARES CADCAM content Leading material offering 2 Applications at a glance 5 Features & benefits ceramics 6 Features & benefits metals 8 Features
T-SERIES. compatible to: DENTSPLY Implants / Xive. PLATFORM 3,4 mm 3,8 mm 4,5 mm 5,5 mm TITANIUM BASE SCAN BODY 3D-GUIDE LAB ANALOG IMPLANT PICK-UP
PLATFORM 3,4 mm 3,8 mm 4,5 mm 5,5 mm TITANIUM BASE for individual milled Zirconium Abutment T 800 T 805 T 810 T 820 SCAN BODY 3D-GUIDE for intra + extra oral scanning T 9.S3D3.400 T 9.S3D3.800 T 9.S3D4.555
Implant Phase Flow Chart
Implant Phase Flow Chart 1. Surgical Phase Immediate Load 1. Place implant 1-2 mm below bone. 2. Attach crown posts at time of surgery using S17000 series abutments and (AS7001) Alan Key, and (AS7033)
STRAUMANN CARES DIGITAL SOLUTIONS. CARES Implant Prosthetics Ultimate restorative flexibility.
STRAUMANN CARES DIGITAL SOLUTIONS CARES Implant Prosthetics Ultimate restorative flexibility. Contents Introduction 3 CARES Abutments 4 CARES Pre-Milled Abutment Blanks 7 CARES Screw-Retained Bars and
contents the smarter case approach reasons to choose simplyintegrated 5 system overview 6 ordering 7 mount-free implants 8-9
simply fixed angled contents the smarter case approach 3-4 3 reasons to choose simplyintegrated 5 system overview 6 ordering 7 mount-free implants 8-9 SMART PACK prosthetics 10 simplyinteractive details
NEW. The SmartFix Concept Prosthetic solution on tilted implants. SmartFix
NEW The SmartFix Concept Prosthetic solution on tilted implants SmartFix The SmartFix Concept Prosthetic solution on tilted implants The SmartFix Concept is an effective and time-saving technique for immediate
R-SERIES. compatible to: Zimmer Dental / Tapered Screw-Vent 36 NT-TRADING CATALOGUE PLATFORM 3,5 mm 4,5 mm 5,7 mm TITANIUM BASE
PLATFORM 3,5 mm 4,5 mm 5,7 mm TITANIUM BASE for individual milled Zirconium Abutment R 800 R 810 R 820 SCAN BODY 3D-GUIDE for intra + extra oral scanning R 9.S3D3.500 R 9.S3D4.500 R 9.S3D5.700 LAB ANALOG
Type 1. Type 2. Straumann Tissue Level. The N-Series abutments are compatible with» N-SERIES «
The N-Series abutments are compatible with N-SERIES «Tissue Level DETAILED VIEW Exact view of the direction of the angulation (indexing) of all angled abutments. Type 1 angled over flat Type 2 angled over
Blue Sky Bio Multi unit Abutments BIO Multi-Units are available for all our Bone Level Implants
BIO Multi-Units are available for all our Bone Level Implants Multi-Units abutments are ideal for following restorative plans Blue Sky Bio offers a variety of components that can be used with BIO Multi-units.
Basic information on. screw-retained hybrid restorations
Basic information on screw-retained hybrid restorations Contents Now available: The new option within your edentulous treatment portfolio 2 An excellent combination of scientifically proven implant technology
Legacy Prosthetic Catalog
Legacy Prosthetic Catalog Straight Snap-On Straight Contoured Angled Contoured Ball Attachment Gold/Plastic Castable Locator Attachment Plastic Temporary Screw Receiving Plastic Non-Engaging Castable 15
SimpleLine II Surgical / Prosthesis Manual
SimpleLine II Surgical / Prosthesis Manual SimpleLine II SURGICAL MANUAL Surgical Drill Sequence 04 Fixture Installation 05 Fixture Connection 06 Surgical Kit Maintenance 08 Warnings 09 04 SimpleLine ll
NobelReplace Conical Connection Product overview
NobelReplace Conical Connection Product overview High primary stability, even in compromised bone situations1 The tapered implant body is designed for high primary stability and is ideal for Immediate
E-SERIES. compatible to: Nobel Biocare / Replace Select. PLATFORM 3,5 mm NP 4,3 mm RP 5,0 mm WP 6,0 mm TITANIUM BASE SCAN BODY 3D-GUIDE LAB ANALOG
PLATFORM 3,5 mm NP 4,3 mm RP 5,0 mm WP 6,0 mm TITANIUM BASE for individual milled Zirconium Abutment E 800 E 810 E 820 E 830 SCAN BODY 3D-GUIDE for intra + extra oral scanning E 9.S3D3.500 E 9.S3D4.300
prosthetic technique manual
prosthetic technique manual table of contents table of contents introduction modules why choose BioHorizons prosthetics? surgical and prosthetic options & impression technique overview impression technique
surgical and prosthetic options & impression technique overview
surgical and prosthetic options & impression technique overview surgical options Multiple surgical protocols are used to achieve the prosthetic outcome of choice. The technique selected may be dependent
Product Information. Straumann Novaloc. A reliable connection that endures.
Product Information Straumann Novaloc A reliable connection that endures. Diamonds are forever As the name implies, amorphous diamond-like carbon (ADLC) is a class of carbon bonds which displays several
synocta Meso abutment for cement-retained restorations PROSTHETICS Step-by-step instructions
synocta Meso abutment for cement-retained restorations PROSTHETICS Step-by-step instructions INTRODUCTION synocta Meso abutment for cement-retained restorations 1 The synocta Meso abutments, available
simply simply digital simply crown & bridge simply removable simply fixed simply à la carte
TM crown & bridge fixed removable digital à la carte imagine... being able to order the way you treatment plan so you can focus on the dentistry, rather than the components knowing your treatment costs
WHERE CREATIVITY MEETS TECHNOLOGY E CREATECH EXCELLENCE. State-of-the-art technology for your prostheses
WHERE CREATIVITY MEETS TECHNOLOGY E CREATECH EXCELLENCE State-of-the-art technology for your prostheses CREATECH EXCELLENCE What is Createch Excellence? CREATECH EXCELLENCE IS OUR RANGE OF SOLUTIONS AIMED
Restore your patients quality of life. Solutions for all edentulous indications
Restore your patients quality of life. Solutions for all edentulous indications 2 Solutions for all edentulous indications «I just wanted to have my smile back, and I truly feel they fixed it just the
Straumann Dental Implant System. Fax Order Form Collection.*
Straumann Dental Implant System. Fax Order Form Collection.* * The NNC Fax Order Form is still a stand alone document due to the unique restorative portfolio Straumann USA, LLC Tissue Level Implants for
More than Abutments. catalogue
More than Abutments catalogue 2013-1 More than Abutment Optimized safety and quality Constant load according to DIN EN ISO 14801 To analyze the behavior of the material and the design of the implants on
Catalog. etkon ident Compatibles perfected. From a partner you can trust _etkon_iDent_Catalogue_nordic indd :56:11
Catalog etkon ident Compatibles perfected. From a partner you can trust. 490.250_etkon_iDent_Catalogue_nordic161220.indd 1 2016-12-20 10:56:11 Contents 1. Introduction 3 2. Portfolio overview 4 2.1 Product
CAD/CAM Prosthetic Solutions
CAD/CAM Prosthetic Solutions CAD/CAM Technology. The MIS MLAB utilizes advanced CAD/ CAM technology to design and produce a range of highly accurate dental restorations in conjunction with the MIS MCENTER
introduction to BioHorizons prosthetics
to BioHorizons prosthetics why choose BioHorizons prosthetics? BioHorizons offers a broad array of abutments for a wide range of restorative applications and individual needs including the versatile 3inOne
/NobelReplace Ø4.3mm. /NobelReplace Ø3.5mm
Neoss Matrix Manual Neoss Matrix System Introduction The Neoss Matrix System has been designed to facilitate the fabrication of custom designed gold, titanium, other alloys and ceramic abutments or frameworks,
cement-retained single crowns using cementable abutments
cement-retained single crowns using cementable abutments cement-retained restorations cement-retained single crowns using cementable abutments Cement-retained implant restorations are similar to conventional
SwissPlant Prosthetic Catalog. SwissPlant
SwissPlant Prosthetic Catalog Contoured Snap-On Angled Contoured Ball Attachment Gold/Plastic Castable Locator Attachment Plastic Temporary Screw Receiving Plastic Non-Engaging Castable Narrow Titanium
Personal Attention Accurate Dental Solutions. Precision Down to the Smallest Detail. Wide Range of Dental Solutions Engineerd for a Lifetime
PRODUCT CATALOG Personal Attention Accurate Dental Solutions Precision Down to the Smallest Detail Wide Range of Dental Solutions Engineerd for a Lifetime Global Partners Table of Contents Company Profile
INSTRUCTIONS FOR USE STRAUMANN VARIOBASE ABUTMENT. Straumann Variobase Abutment
INSTRUCTIONS FOR USE STRAUMANN VARIOBASE ABUTMENT Straumann Variobase Abutment The ITI (International Team for Implantology) is the academic partner of Institut Straumann in the areas of research and education.
HEXAGON Implant System
HEXAGON Implant System PRODUCT N 1 CATALOG 2018 2 Table of contents Implants... 4 Prosthetics Lab Components, Abutments... 5 Zest LOCATOR, R-Tx and F-Tx...6 Multi-Unit Abutments...7 Instruments...8 Zest
Quick start Prosthetics
EN Quick start Prosthetics Easy and effective YELLOW PROSTHETIC PLATFORM QN CEMENTED RESTORATIONS ESTHETIC AUTMENTS OPEN TRAY POST IMPLANT ANALOG Indexed components with internal conical connection. 0.7
SuperLine & Implantium Surgical / Prosthesis Manual
SuperLine & Implantium Surgical / Prosthesis Manual SuperLine & Implantium SURGICAL MANUAL Surgical Drill Sequence I 04 Surgical Drill Sequence II 06 Drilling Depth Guide 08 Fixture Connection 10 Installation
OCCLUSALLY SCREW-RETAINED
a a perfect fit fit OCCLUSALLY SCREW-RETAINED RESTORATIONS WITH VARIO SR PROSTHETIC COMPONENTS ON CAMLOG VARIO SR ABUTMENTS Basic Information Aligning tool for controlling the implant axes Impression taking
Fixed Partial Dentures /FPDs/, Implant Supported. in implant prosthodontics
Fixed Partial Dentures /FPDs/, Implant Supported Prosthesis/ISP/ in implant prosthodontics Prof.dr.Tamas Divinyi Semmelweis University, Faculty of Dentistry Department of Oral and Maxillofacial Surgery
NobelActive Product overview
NobelActive Product overview High primary stability even in demanding situations NobelActive s expanding tapered implant body condenses bone gradually while the apex with drilling blades enables a smaller
Straumann synocta Prosthetic System Basic Information. Technical Information
Straumann synocta Prosthetic System Basic Information Technical Information About this guide The Basic Information on the Straumann synocta Prosthetic System provide dental practitioners and related specialists
Real World Implant Prosthetics: Fixed and Removable Samuel M. Strong, DDS
Real World Implant Prosthetics: Fixed and Removable Samuel M. Strong, DDS Presurgical planning Health history-systemic conditions Case presentation Financial agreement Radiographs- PA s, FMX, Panoramic,
Ankylos. Product Catalog
Product Catalog General prosthetic advice for In order to obtain utmost benefit from the unique restorative features of the implant system, please observe the following guidelines: Avoid occlusal overload,
MiNi Overdenture Fixture
MiNi Overdenture Option MiNi Overdenture Fixture 1. Product Concept 1. Fast osseointegration for thanks to our SLA surface treatment. 2. Excellent for maxillary lateral incisor and mandible anterior. 3.
TITANIUM BASES CAD/CAM FOR CROWN AND BRIDGE RESTORATIONS CAD/CAM PROSTHETICS ON CAMLOG AND CONELOG IMPLANTS
TITANIUM BASES CAD/CAM FOR CROWN AND BRIDGE RESTORATIONS CAD/CAM PROSTHETICS ON CAMLOG AND CONELOG IMPLANTS TABLE OF CONTENTS GENERAL SYSTEM INFORMATION 2 CAMLOG AND CONELOG TITANIUM BASES CAD/CAM PRODUCT