CURRICULUM VITAE NAME EDUCATION QUALIFICATIONS APPOINTMENTS

Transcription

1 CURRICULUM VITAE NAME Professor Wala Majid Mohamed Amin. ADDRESS Faculty of Dentistry, University of Jordan, Amman. NATIONALITY Jordanian MARITAL STATUS Married, three children. EDUCATION QUALIFICATIONS APPOINTMENTS College of Dentistry, Baghdad University The Dental School, School of Medicine, University College London, UCL / London University United Medical and Dental Schools of Guy's and St. Thomas's UMDS, University of London. High School Bachalauriate 1966 BDS Baghdad University 1971 Dip.ed. Huddersfield University/ England 1978 MSc London University 1979 PhD London University 1987 FICS Int. College of Surgeons 1990 National Service, House Dental Surgeon Private Practice, Baghdad Teaching Assistant, Dental Sch., Baghdad University. Aug '73-Nov'78 Lecturer in Dental Surgery, Institute of Medical Technology, University of Baghdad. Head of the Dental Dept. Institute of Medical Tech. Foundation of Technical Institutes, Baghdad. Dean of the Inst.Med.Tech., F.T.I. Baghdad. Clinical Instructor and lecturer to senior Dental Students and contributor to postgraduat courses for general Practitioners, Dept.of Prosthetics, The Dental School, School of Medicine, University College London, London University Oct. '81-'Sept. 83 Research Fellow and Candidate for PhD. The Dental School, United Medical and Dental Schools of Guy's and St. Thomas's Oct.1983-Jan.1987 Assistant Professor, Dental Sch. Baghdad Univ. and the Institute of Medical Tech, Baghdad Jan July-989 Consultant Prosthodontist, HALABU Private Hospital Michigan U.S.A Sept.1990-Jan

2 SOCIETIES Jordanian Dental Association Iraqi Dental Association Kuwaiti Dental society Arab Dental Federation British Society for the Study of Prosthetic Dentistry European Prosthetic Association International Dental Federation PUBLICATIONS 1. A study of the interface between resilient denture liners and poly (methylmethacrylate). Eng. in Med. J., 9: (1980). 2. A meachanical analysis of the physical bonding properties of soft lining materials to PMMA. Int. J. Adhesion and Adhesives, (1981) 3. The nature of the interface between PMMA and soft lining materials J. Dent.,9: (1981) 4. The effects of water on the bonding properties of soft lining materials to Acrylic bases. Proc. Euro. Prosthet: Assoc., 5: (1981) 5. Effects of surface characteristics and water on the bonding of soft lining materials to PMMA. Int. J. Adhesion and Adhesives, (1982) 6. Some mechanical properties including the repair strength of two self-curing acrylic resins. J. Dent,.10: (1982) 7. Dentoalveolar abscesses and spread of oral infections to face and neck J.Dent. Assoc. Thailand, 32: (1982) 8. Mechanical and Thermodynamic analysis of soft denture liners /PMMA Bonds. Proc. Euro. Prosthet. Assoc., 6: 35 (1982) 9. Tooth bond characteristics of some acrylic denture base polymers Proc. Euro. Prosthet. Assoc., 6: (1982) 10. Colour stability of two self-curing denture base materials. Biomaterials., 3: (1982) 11. Compatibilty of denture cleansers with some new self curing denture base materials. Biomaterials., 3: (1982) 12. The level of residual monomer in self curing denture-base materials. J.Dent. Res. 62: (1983) 13. Further mechanical tests on the bond between acrylic teeth and some denture base polymers. Proc. Euro. Prosthet. Assoc.,7: (1984) 2

3 14. A method of improving the bonding between artificial teeth and PMMA J. Dent.,13: (1985) 15. The Effect of water and saliva on the bond strength of PMMA to differing interface contours of acrylic teeth. Proc. Euro. Prosthet. Assoc., 9: (1986) 16. Environmental effects on peel adhesion of soft denture liner/pmma Systems. Proc. Euro. Prosthet: Assoc.,10:13 (1986) 17. Adhesion of soft liners to PMMA: The surface energy term. Proc. Brit. Soc. Dent. Res. 3: 347 (1987) 18. Integrity of the interface between the gingival seat of a class II cavity and various restorative materials. Egyptian Dental Journal, 45, , (1999) 19. An update on the bonding characteristics of denture base polymers to acrylic teeth: Part 1. Verification of the bonding test method and evaluation of the influence of strain rate on bond strength. Egyptian Dental Journal, 46: (2000) 20. Bonding characteristics of polymeric denture tooth to a heat-cured denture base polymer: the effect of strain rate on bond strength. Egyptian Dental Journal, 46 : (2000) 21. Tooth bond properties of various denture base polymers. Egyptian Dental Journal, 47: (2001) 22. Oral health status of workers exposed to acid fumes in phosphate and battery industries in Jordan. Int Dent J, 51: (2001) 23. Tooth surface Loss: a challenging problem to practicing dentists. Egyptian Dental Journal, 47: (2001) 24. Fluoride release from glass ionomer restorative materials and the effects of surface coating. Biomaterials, 22: (2001) 25. Improving bonding of acrylic teeth to self-polymerizing denture base resins. Saudi Dent J, 14:15-19 (2002) 26. Durability of acrylic tooth bond to polymeric denture base resins. Eur. J. Prosthodont. Rest. Dent., 10: (2002) 27. Toothwear: an overview of etiology, diagnosis and presentation of five cases. Egyptian Dental Journal,48:47-58 (2002) 28. Evaluation of marginal leakage of class V bonded amalgam restorations. Cairo Dental Journal, 20:49-52 (2004) 3

4 29. Disinfecting irreversible hydrocolloid impression material: an in vitro microbiological study. Cairo Dental Journal, 20:49-52 (2004) 30. Microleakage of various amalgam bonding systems. Saudi Dental Journal,16: (2004) 31. Coinheritance of two rare genodermatosis (Papillon-Lefevre syndrome and oculocutaneous albinism type 1) in two families:a genetic study. British Journal of Dermatology, 151: (2004) 32. Papillon-Lefevre syndrome with albinism: a review of the literature and report of two brothers." Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 100(6): (2005) 33. Role of copper content and the effect of ageing in a simulated intraoral environment on the electrochemical behavior of dental amalgam. Cairo Dental Journal, 20: (2)- part 2: (2005) 34. Microstructure versus static creep of dental amalgams. Cairo Dental Journal, 20: (2005) 35. Static creep characterization of dental amalgams: the effect of a long-term exposure to simulated mouth conditions. Cairo Dental Journal, 20: (2005) 36. Dental Erosion: Clinical Manifestations and Treatment modes of Four Risk Factor Cases. Cairo Dental Journal, 20: (2006) 37. Comparative study of the sealing efficacy of various bonding systems to Class V dental amalgam restorations. Int J Adhesion and Adhesives, 26: (2006) 38. Prevalence and Characteristics of Dental Fear among Dental and other university Students in Jordan. Cairo Dental Journal, 20: (2006) 39. Effect of aging in simulated intraoral condititions on monomer elution from poly(methyl methacrylate) resin. Polymers & Polymer Composites, 15,7: (2007). 40. Comparative electrochemical investigationof the effect of aging on corrosion of dental amalgam. Quintessence, 38:615: (2007). 41. The relation of the maxillary anterior teeth to the incisive papilla among Jordanians. JCDP; 9, (5):42-51, (2008). 42. Burnout among clinical dental students in Jourdanian universities. Journal of Clinical Medicine Research, 1,(4): (2009). 4

5 43. Health status of clinical dental students in the Jordanian universities. Journal of Clinical Medicine Research, 1, (1):45-49 (2009). 44. Prevalence of temporomandibular joint disorders among students of the university of Jordan. J Clin Med Res, 1(3): (2009). 45. The effects of disinfectants on dimensional accuracy and surface quality of impression materials and gypsum casts. Journal of Clinical Medicine Research, 1, (2):81-89 (2009). 46. A new form of intraoral delivery of antifungal drugs for the treatment of denture induced oral candidosis. Eur. J. Dent, 13, (3): (2009). 47. In vitro studies of the elution of Fluconazole, Chlorhexidine and a combination of the two drugs from a self-cured acrylic and the effect of the eluates upon the growth of Candida albicans. Materials Research Innovations, 13, (4): in press (2010). 48. Study of the elution of fluconazole from a self-polymerizing acrylic resin and its activity against resistant Candida albicans. J Mater Sci: Mater Med DOI /s z (2009). 49. A polymeric drug delivery system for the intraoral administration of Chlorhexidine for the treatment of denture-induced stomatitis. Eur J Prosthet. Rest. Dent, 17, accepted (2010). 50. Fracture Resistance of Post-crown Restored Anterior Teeth: 1- the influence of the type of post system used. JCDP, 10: accepted (2010). 51. Fracture Resistance of Post-crown Restored Anterior Teeth: 2- the influence of the location of the remaining coronal tooth structure. JCDP, accepted (2010). 52. Incisal edge abrasion caused by an unusual eating habit. Compendium of Continuing Education in Dentistry, accepted (2010). Off the above publications in addition to some others have been read to annual meetings, national and international conferences of various Dental societies and associations. These presentations were: British Society for the Study of Prosthetic Dentistry 1981 The nature of the interface between PMMA and soft lining materials. (Warwick/England) 1982 Some mechanical properties including the repair strength oftwo self curing resins. (Edinbourgh/Scotland) 1984 A method of improving the bonding between artificial teeth and PMMA. (Cardif/Wales) 5

6 British Sciety for Dental Research 1987 Adhesion of soft liners to PMMA: The surface energy term. (Oxford/England) European Prosthodontic Association 1981 The effects of water on the bonding properties of soft lining materials to acrylic bases. (lyon/france) 1982 Mechanical and thermodynamic analysis of soft denture liner-pmma bonds. (Edinbourgh/Scotland) 1983 Tooth bond characteristics of some acrylic denture base polymers. (Budapest/Hungary) 1984 Further mechanical tests on the bond between poly (methylmethacrylate) teeth and some acrylic denture base polymers. (Badnauheim/West Germany) 1985 The Effect of water and saliva on the bond strength of PMMA to differing interface contours of acrylic teeth. (Athens/Greece) 1986 Environmental effects on peel adhesion of soft denture liner/pmma systems. (Oxford/England) Dental Association of Thailnad 1982 Dentoalveolar abscesses and spread oforal infection to face and neck. (Bangkok/Thailand) Annual research meeting of staff of the United Medical and Dental Schools of Guy's and St. Thomas's 1986 Additivity of polar and dispersive forces and their contribution to the thermodynamic work ofadhesion ofpolymers. (London/England) Kuwaiti Dental Association 1987 Planning the anchorage for removable partial dentures Dynamics of mandibular movements: a new method of classification by employing the principles of functional anatomy A study of tissue displacement underneath removable partial dentures of different designs Retention in various types of obturators utilized in cleft palate reconstruction. 6

7 The Annual Conferences of the Royal Medical Services, Jordan 1992 Soft denture liners/pmma bonding revisited Various Enamel and Dentin Bonding Systems: a special review. (with F.K. Wahab) A new classification for prefabricated post and core restorations. (with F.K. Wahab) Recent developments in dental ceramics. (with F.K. Wahab). Jordanian Dental Association 1996 The enviromental effect on stability and integrity of various impression materials Masticatory efficiency and prosthodontic treatment The influence of diet on chewing patterns. Conferences of the Jordanian society of Dental Laboratory Technitions 1997 Single Denture with Cast Occlusion: indications and methods of fabrication Therapeutic Occlusion in Prosthodontics. UNIVERSITY THESES The interface between acrylic resin and resilient lining materials. M.Sc. Thesis. University of London (1978) A study of adhesion between soft lining materials and poly (methylmethacrylate). Ph.D.Thesis, University of London (1987) AT PRESENT (Feb todays date) Professor, Faculty of Dentistry, and Senior Consultant of Prosthetic Dentistry and Biomaterials at the Jordan University Hospital. Member of the High committee for Dental postgraduate studies of the Jordan Medical Council. Member of the National Board of Dental Examiners in Restorative Dentistry at the Jordan Medical Council. External examiner of the final BDS candidates at the Jordan University of Science and Technology. External Cognet examiner of postgraduate MSc candidates at the Jordan University of Science abd Technology. Member of the Editorial Board of the Journal of American Dental Association, the Middle Eastern Edition (JADA-ME). Member of the Reviwing Board of the International Arab Journal of Dentistry 7

8 REFERENCES Professor L. D. Rajab, Dean of the faculty of Dentistry, University of Jordan Amman, Jordan Professor Fouad Kadhem Consultant in Restorative Dentistry, vice dean of the faculty of Dentistry, University of Jordan, Amman, Jordan Dr. P. R. Likeman, Senior Lecturer in Prosthetic Dentistry/ Hon Consultant, Department of Prosthetic Dentistry, Floor 21, Guy s Tower, Guy s Hospital, London Bridge, London SE1 9RT, England 8