grow Fertiliser for the Future grow is a novel foliar fertilizer concept meeting the

Transcription

1 Foliar Fertilisers

2 Cu Ca Zn Mg grow Fertiliser for the Future grow is a novel foliar fertilizer concept meeting the demands of future agriculture. Verno micro nutrients combine several desired properties in a new series of products. Key advantages are: grow contains micronised particles. grow adheres strongly to leaves and plant surfaces. grow provides a reservoir of slow release copper. grow provides nutrient when the plant needs it. grow is free-flowing and essentially non-dusty.

3 grow a NORDOX Innovation Foliar nutrient applications deposit the essential nutrient close to the place where they are needed for increasing the yield and the quality of the yield. The retained particles degrade gradually and contribute with a continuous flow of nutrients from the reservoir on the leaves. grow is formulated from carefully select the ingredients. The ingredients are micronised before making the final product. The small particles distribute well on plants and stay there until they are consumed by the plant itself. grow is highly concentrated water dispersible granules for meeting the wish for user-friendly products and less energy spent on transport and handling.

4 Application grow is highly concentrated water dispersible granules for meeting the wish for userfriendly products and less energy spent on transport and handling. Fill the tank 3 4 full with water and apply correct dose with agitation. grow shall be dispersed in water BEFORE adding any other adjuvant or mixing partner. grow will not disperse if put into any oil, sticker or spreader. Field crops: Use litres of water pr hectare, depending on spraying equipment. Other crops: Use same amount of water as usual to obtain desired coverage. grow gives better coverage. It sticks better than large particles. Superior adhesion and retention. Greater surface area means that it dissolves faster.

5 Copper / Zinc Verno is a combined Copper and Zinc fertiliser for foliar applied correction of copper and Zinc deficiencies, containing 30% elemental Copper, 30% elemental Zinc and naturally occurring adjuvants. Verno contains micronised particles of cuprous oxide and zinc oxide, adheres strongly to leaves and plant surfaces, provides a reservoir of slow release copper and zinc supplying the nutrients when the plant needs it. Cu Zn Verno is a free-flowing and essentially non-dusty dispersible granulate. INFO: water dispersible copper granules for the correction of copper deficiencies. Contains: opper in the form of cuprous oxide 34,5%* Zinc in the form of zinc oxide 37,3%* Formulants 28,2% * Equivalent to 30% elemental Cu and Zn DIRECTIONS FOR USE Cereals Use gram pr. hectare at the 4 leaf stage until tillering (Zadok ś stage 14-21) where deficiency is severe application can be repeated at booting (Zadok ś growth stage 45). Rice Use gram pr hectare at tillering (Zadok ś growth stage 21-25) or 25 days after transplanting. Fruit trees Use kg pr hectare post harvest, no later than 14 days before leaf abscission. Nut trees Use gram post harvest, at the bud formation for the next season. Citrus 1 kg pr hectare during flowering. APPLICATION Fill the tank 3 4 full with water and apply correct dose with agitation. Verno shall be dispersed in water BEFORE adding any other adjuvant or mixing partner. Verno will not disperse if put into any oil, sticker or spreader. Tank mixes: we do not recommend mixing unless physical compatibility is verified on farm. If in doubt, please use 1,5 concentration of mixing partners in a 10 litre bucket and check for precipitation before applying mixtures. We also recommend to test the mixture on a limited crop-area to assess crop safety. Phytotoxicity usually is visual within 2 days Field crops: Use litres of water pr hectare, depending on spraying equipment. Other crops: Use same amount of water as usual to obtain desired coverage. Do not use on copper shy varieties and spray in the morning or evening or on a cloudy day. Micronization: The copper is micronized to give optimum coverage and retention. The product remains on the foliage as a slow release source of copper until consumed. PRECAUTIONS: Keep out of reach of children. Use impermeable gloves when handling and spraying. Dispose of empty bags according to regulations set by local authorities. Avoid contamination of water sources during spraying, and apply a 10-fold dilute spray if the tank is not empty when the intended area is covered. Manufactured by: NORDOX AS

6 POISON KEEP OUT OF REACH OF CHILDREN GUARANTEED MINIMUM ANALYSIS: Copper (Cu) as cuprous oxide 300g/kg Zinc (Zn) as zinc oxide 300g/kg FOLIAR FERTILISER The copper and zinc oxides are micronised and formulated together for uniform mixing and ease of handling. Micronisation gives optimum coverage and retention with the product persisting on the foliage as a slow release source of nutrients. DIRECTIONS FOR USE: Application timing and use rates should be determined by soil or tissue analysis. Suitable agronomic advice should be sought,as weather, crop, soil and other conditions may vary. For more detailed Directions for use on this product contact your local Yara Nipro representative. CROPS Winter Cereals (Wheat, Barley): Canola: Legumes: DIRECTIONS Apply g/ha from early tillering (Z20) through until second node visible (Z32). Apply g/ha at the 4-8 leaf stage. Apply g/ha when the crop is 10-15cm tall. Water rate: Field crops should be litres of water per hectare depending on spray equipment. Horticulture crops use the same amount of water as usual to obtain desired coverage. Application: Fill the tank ¾ full with water and add the required dose with agitation. Verno FG Cu30+Zn30 should be dispersed in water BEFORE adding any other adjuvant or mixing partner. Verno FG Cu30+Zn30 will not disperse if put into any oil, sticker or spreader. DO NOT tank mix with acidifying surfactants. We do not recommend tank mixing with other products unless compatibility is confirmed by the manufacturer of that product. MIXING AND STORAGE: Different fertiliser products have the potential to be incompatible. Rinse tanks and application systems thoroughly with water when changing from one product to another. For advice regarding storage and application systems contact your local Yara Nipro representative. SAFETY DIRECTIONS: Avoid ingestion and inhaling product. Avoid contact with the eyes and skin. Wash hands after use. VERNO FG Cu30+Zn30 is manufactured by NORDOX AS Østensjøveien 13 NO 0661 Oslo Norway Tel: Sold and distributed in Australia by Tanuki Pty. Ltd. PO BOX 4688 Toowoomba East Tel: office@tanuki.com.au FIRST AID: First Aid is not generally required. If in doubt, contact a Poisons Information Centre (Phone ) or a doctor. CONDITIONS OF SALE: These goods are manufactured and tested to specific standards and are sold in good faith, however, no guarantee is given as the conditions and methods under which they are used are beyond the control of Yara Nipro. Before using the user should determine the suitability of the product for its intended use and user assumes the risk and liability in connection therewith. Net content: 10 kg