Technical Data Sheet SPI-305M

Transcription

1 326 Exchange Drive Arlington, Texas Technical Data Sheet SPI-305M INCI Name: Polyacrylamide & C13-14 Isoparffin & Laureth-7 Properties SPI-305M is a pre-neutralized polymer in ready to use liquid form (water in oil emulsion). It is a rheology modifier working as a thickener, and as an emulsifier (stabilizer). The product can be used to make gels, cream-gels and emulsions easily under very moderate shear at cold temperature. While also being able to emulsify various kinds of oil and also acts as a very good pigment dispersant because of its lipodispersible character. Applications Skin Cream Moisture Preparations Bath Preparations Skin, Hair, & Sun Care Make-up Baby Care Lubrication Products Cleansing Lotion Gels Specifications Property Specification Remarks Appearance Fluid Emulsion Odor Odorless Solubility Dispersible in water, insoluble in ethanol, chloroform Neat Viscosity (25 C) 1,500 4,500 mpa Brookfield RVT Spindle 3, 20 2% in H 2O 65,000 90,000 mpa Brookfield RVT Spindle 6, 5 Solid Content 45 49% 150 C, 2g IR Moisture Determination Balance 2% in H 2O Residual Acrylamide 2 ppm max Residual AMPS 1000 ppm max 3% in H 2O 80, ,000 mpa Brookfield RVT Spindle 6, 5 Moisture About 30% Karlfischer Titration 3% in H 2O + NaCL 0.1% 15,000 30,000 mpa Brookfield RVT Spindle 4, 5

2 Technical Data Sheet SPI-305M Regulatory INCI Name: Polyacrylamide & C13-14 Isoparffin & Laureth-7 Chemical Description of the polyacrylamide: acrylamide/sodium acryloyldimethyltaurate copolymer CAS No: / / China: Listed in IECIC Japan: Fit for quality specifications of QD Resistance to Electrolytes For testing resistance on electrolytes, NaCl was added to the 2% solution (in water), and check change in viscosity. Test results show decreasing trend of viscosity is similar.

3 Resistance to Chelating Agents For testing resistance on electrolytes, EDTA-2Na was added to the 2%Multicare solution (in water), and check change in viscosity. Test results show decreasing trend of viscosity is similar. Viscosity/ dose curve in de-ionized water (DI Water) Method Test Result Concentration % Using automatic agitation in low concentration In high concentration, using manual agitation The product viscosity profile in DI water versus concentration is very similar to the benchmark one

4 Viscosity Stability According to ph The test results show the trend of viscosity variation is very similar. The products maintains high viscosity from ph 3 to 11. The formula used contains 3% SPI-305M and 97% water. Add Lactic Acid or 20% NaOH solution drop by drop to 3% SPI-305M solution. Viscosity Comparison in a Formulation Formulation SPI-305M Benchmark Remarks Thickener 3% 3% Preservatives 0.6% MP, PP, BP 1.0% Phenoxy Ethanol Perfume 1.0% Pure Essential Oil Water To 100% Results (Viscosity) 128, ,000 Brookfield Viscometer RVT spindle 6, 5 The test used SPI-305M, common preservative, and a perfume. The viscosity was checked at normal temperature after 10 minutes of agitation. The results of the test using SPI-305M shows that the product is as compatible as benchmark with usual preservatives Tested Formulation Thickener (SPI-305M): 3% Preservatives: 0.6% Phenoxy Ethanol: 1.0% Perfume: 1.0 % Water QS: 100%

5 Thickening Effect According to Solvents Tested Formulation Solvent 50% (Glycerine, 1,3- Butylene glycol, ethanol, propylene glycol) Thickener 3% (SPI- 305M), Water 47% Silicone DC345 10%, Thickener 3%, Water 87% The Test results show viscosity properties are the same for SPI- 305M Emulsifying Power of SPI-305M Oil Stability at 45 C Stability at 50 C Isohexadecane Liquid Paraffin Squalane Caprylic/Caprilic Triglyceride C12-15 Alkyl Benzoate Isonoyl Isononanoate Jojoba Oil Dimethicone Cyclomethicone Tested Formula Oil 40% SPI-305M 3% Di-Water 57% Oil 40% SPI-305M 3% Di-Water 57