SPRINGER BRIEFS IN APPLIED SCIENCES AND TECHNOLOGY

Transcription

1 SPRINGER BRIEFS IN APPLIED SCIENCES AND TECHNOLOGY Zahra Trad Abdelwahed Barkaoui Moez Chafra João Manuel R. S. Tavares FEM Analysis of the Human Knee Joint A Review 123

2 SpringerBriefs in Applied Sciences and Technology Series editor Janusz Kacprzyk, Polish Academy of Sciences, Systems Research Institute, Warsaw, Poland

3 SpringerBriefs present concise summaries of cutting-edge research and practical applications across a wide spectrum of fields. Featuring compact volumes of pages, the series covers a range of content from professional to academic. Typical publications can be: A timely report of state-of-the art methods An introduction to or a manual for the application of mathematical or computer techniques A bridge between new research results, as published in journal articles A snapshot of a hot or emerging topic An in-depth case study A presentation of core concepts that students must understand in order to make independent contributions SpringerBriefs are characterized by fast, global electronic dissemination, standard publishing contracts, standardized manuscript preparation and formatting guidelines, and expedited production schedules. On the one hand, SpringerBriefs in Applied Sciences and Technology are devoted to the publication of fundamentals and applications within the different classical engineering disciplines as well as in interdisciplinary fields that recently emerged between these areas. On the other hand, as the boundary separating fundamental research and applied technology is more and more dissolving, this series is particularly open to trans-disciplinary topics between fundamental science and engineering. Indexed by EI-Compendex and Springerlink. More information about this series at

4 Zahra Trad Abdelwahed Barkaoui Moez Chafra João Manuel R. S. Tavares FEM Analysis of the Human Knee Joint A Review 123

5 Zahra Trad LR-11-ES19 Laboratoire de Mécanique Appliquée et Ingénierie (LR-MAI), Ecole Nationale d Ingénieurs de Tunis Université de Tunis El Manar Tunis Tunisie Abdelwahed Barkaoui LR-11-ES19 Laboratoire de Mécanique Appliquée et Ingénierie (LR-MAI), Ecole Nationale d Ingénieurs de Tunis Université de Tunis El Manar Tunis Tunisie Moez Chafra Laboratoire de Systèmes et de Mécanique Appliquée Ecole Polytechnique de Tunis Tunis Tunisie and IPEIEM Université de Tunis El Manar Tunis Tunisie João Manuel R. S. Tavares Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Departamento de Engenharia Mecânica, Faculdade de Engenharia Universidade do Porto Porto Portugal ISSN X ISSN (electronic) SpringerBriefs in Applied Sciences and Technology ISBN ISBN (ebook) Library of Congress Control Number: The Author(s), under exclusive licence to Springer International Publishing AG, part of Springer Nature 2018 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, express or implied, with respect to the material contained herein or for any errors or omissions that may have been made. The publisher remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. Printed on acid-free paper This Springer imprint is published by the registered company Springer International Publishing AG part of Springer Nature The registered company address is: Gewerbestrasse 11, 6330 Cham, Switzerland

6 Without a curious mind, what would we be? Such is the beauty and nobility of science: an endless desire to push back the frontiers of knowledge, to hunt down the secrets of matter and life without any preconceived idea of the possible consequences. Marie Curie

7 Everything I am or aspire to become, I owe it to my mother, my angel. These pages are a way to say thank you. I will always thank you. I will always love you. With love, Zahra Trad

8 Acknowledgements The authors gratefully acknowledge the funding of Project NORTE FEDER SciTech Science and Technology for Competitive and Sustainable Industries, co-financed by the Programa Operacional Regional do Norte (NORTE2020), through the Fundo Europeu de Desenvolvimento Regional (FEDER). ix

9 Contents 1 Finite Element Models of the Knee Joint Knee Joint Model Geometries Material Properties of Hard and Soft Tissues Material Properties of Articular Cartilage Material Properties of Menisci Material Properties of Ligaments Material Properties of Bony Structure References Finite Element Analysis Applications in Biomechanical Studies of the Knee Joint Current FEA Applications on Ligament Injury Current FEA Applications on Meniscus Injury Current FEA Applications on Knee Joint Contact Analysis and Cartilage Disease References Overview of High Tibial Osteotomy and Optimization of the Correction Angle High Tibial Osteotomy Definition Current FEA Studies on the HTO Procedure Current Clinical Studies on Optimizing the Correction Angle Current Biomechanical Studies on Optimizing the Correction Angle References Conclusions and Future Work xi

10 Introduction Biomechanics is the study of the mechanical laws relating to the movement and/or structure of living organisms. It often refers to the study of human body interaction with the environment under different conditions. Particularly, the knee joint is the largest and most complex and stressed joint in the human body, comprised of both the femoro-patellar and tibiofemoral joints. The important structure of the knee joint is divided into the following main tissues. The soft tissues include ligaments, tendons, menisci, muscles, and articular cartilages. The bony structure (hard tissues) includes the femur, tibia, fibula, and patella. Owing to the bearing of very high loads, the knee structure permits active movement for daily activities such as walking, running, sitting, and kneeling, which produce complex mechanical responses under the loads that occur in everyday life (Moglo and Shirazi-Adl 2003; Sahu and Kaviti 2016; Gatchel et al. 2007; Kiapour et al. 2014; Biščević et al. 2005; Zaffagnini et al. 2013). However, excessive joint loading on the articular cartilage, as well as age, weight bearing, meniscectomy, alignment, and joint injury, may cause various types of damage and lead to the initiation and progression of knee osteoarthritis (OA). Clinical studies have revealed that an increased risk in knee OA progression with abnormal tibiofemoral alignment most likely results from the increase of mechanical loading at the knee joint (Andriacchi et al. 2004; Sharma et al. 2001; Felson and Zhang 1998; Felson et al. 2000; Sowers 2001; Cooper et al. 2000; Sharma 2001; Cerejo et al. 2002; Englund and Lohmander 2004; Felson et al. 2004; Griffin and Guilak 2005; Kraus et al. 2013; Kubo et al. 2009; Arokoski et al. 2000). The role of the loading axis in the progression of knee OA has been well recognized. Clinically, the interventions that modify the excessive forces related to the position of the loading axis acting on damaged tissues, such as articular cartilage, have been applied in relieving OA symptoms (Akizuki et al. 2008). For knees afflicted by medial OA progression, high tibial osteotomy (HTO) can be an effective adjunct to conservative management of interruption of the disease s progression (Schallberger et al. 2011; Esenkaya and Elmali 2006). By correcting the hip knee ankle (HKA) angle, HTO shifts the mechanical load from the arthritic medial compartment to the lateral compartment with relatively healthy cartilage. xiii