Material Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR

Transcription

1 WHMIS (Pictograms) Cleanitizer Concentrated Carpet Sanitizer/Deodorizer/Cleaner CLASS B-3: Combustible liquid with a flash point between 37.8 C (100 F) and 93.3 C (200 F). CLASS D-1B: Material causing immediate and serious toxic effects (TOXIC). CLASS E: Corrosive liquid. Not applicable. Betco Corporation 1001 Brown Avenue Toledo, Oh (419) WHMIS (Classification) Section 1. Chemical Product and Company Identification Product Name/ Trade name Synonym Chemical Family Chemical Formula Manufacturer/ Supplier TSCA DSL/ NDSL TSCA Inventory: All components listed or are exempt from listing. All components listed unless noted elsewhere on this MSDS Material Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR Code CAS # Class: Combustible liquid having a flash point between 37.8 C (100 F) and 93.3 C (200 F). Print Date In Case of Emergency HCS Class: Corrosive liquid. HCS 411 Mixture. Validation Date 3/26/2004 3/27/2004 Chemtrec (800) Protective Clothing Section 2. Composition and Information on Ingredients Name CAS # % by Weight Exposure Limits LC 50/LD 50 1) Quaternary Ammonium Chloride ) Sodium Carbonate ) Propylene Glycol ORAL (LD50): Acute: 5000 mg/kg [Rat]. 4) Tetrapotassium Pyrophosphate ) Sodium Hydroxide TWA: 2 (mg/m 3 ) from OSHA (PEL) [United States] 6) Sodium Lauryl Sulfate ) Sodium Silicate ) Nonionic Surfactant Section 3. Hazards Identification Potential Acute Health Effects Potential Chronic Health Effects Carcinogenic Effects Very hazardous in case of skin contact (corrosive, irritant), of eye contact (irritant, corrosive), of ingestion. Hazardous in case of inhalation. Liquid or spray mist may produce tissue damage particularly on mucous membranes of eyes, mouth and respiratory tract. Skin contact may produce burns. Inhalation of the spray mist may produce severe irritation of respiratory tract, characterized by coughing, choking, or shortness of breath. Severe over-exposure can result in death. Inflammation of the eye is characterized by redness, watering, and itching. Skin inflammation is characterized by itching, scaling, reddening, or, occasionally, blistering. Prolonged exposure may result in skin burns and ulcerations. Not classified or listed by IARC, NTP, OSHA, EU and ACGIH.

2 Section 4. First Aid Measures Eye Contact Skin Contact Inhalation Ingestion Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention immediately. In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention immediately. If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention. If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention immediately. Section 5. Fire Fighting Measures Products of Combustion Fire Fighting Media and Instructions Special Remarks on Fire Hazards Special Remarks on Explosion Hazards Non-flammable substance. Water is very effective. Products of combustion are toxic. Section 6. Accidental Release Measures Small Spill and Leak Safety glasses or chemical anti-splash goggles recommended. Large Spill and Leak Personal Protection in Case of a Large Spill Absorb with an inert material and put the spilled material in an appropriate waste disposal. Splash goggles. Full suit. Vapor respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this product. Section 7. Handling and Storage Precautions Incompatibility Storage Avoid breathing vapors or spray mists. Avoid contact with skin and eyes No incompatible product according to our data base. Keep out of the reach of children. Not for use or storage in or around the home. Section 8. Exposure Controls/Personal Protection Engineering Controls Personal Protection Good general ventilation should be sufficient to control airborne levels. Eyes Splash goggles. Protective Clothing (Pictograms) Body Respiratory Wear appropriate respirator when ventilation is inadequate. Hands Gloves (impervious). Exposure Limits Sodium Hydroxide TWA: 2 (mg/m 3 ) from OSHA (PEL) [United States] Consult local authorities for acceptable exposure limits.

3 Section 9. Physical and Chemical Properties Physical State and Appearance Liquid. Odor Pleasant. Molecular Weight Not applicable. Taste ph 13 [Basic.] Color Yellow. Boiling/Condensation Point Melting/Freezing Point Critical Temperature Instability Temperature Specific Gravity 1.07 (Water = 1) Vapor Pressure Vapor Density >1 (Air = 1) Volatility >80 VOC <1% Evaporation Rate <1 Dispersion Properties Solubility The Product is: Auto-ignition Temperature Flash Points Flammable Limits Fire Hazards in Presence of Various Substances Explosion Hazards in Presence of Various Substances Combustible. CLOSED CUP: C (174.4 F). Not applicable Section 10. Stability and Reactivity Data Stability Incompatibility with Various Substances Hazardous Decomposition Products The product is stable. No incompatible product according to our data base. Will not occur.

4 Section 11. Toxicological Information Routes of Entry Toxicity to Animals Absorbed through skin. Eye contact. Inhalation. Ingestion. Acute oral toxicity (LD50): 140 mg/kg [Rat]. (Sodium Hydroxide). Acute Effects on Humans Eyes Very hazardous in case of eye contact (irritant, corrosive). or blindness. Skin Inhalation Ingestion Chronic Effects on Humans Hazardous in case of inhalation. Inhalation of the spray mist may produce severe irritation of respiratory tract, characterized by coughing, choking, or shortness of breath. Prolonged exposure may result in skin burns and ulcerations. Eye contact can result in corneal damage Very hazardous in case of skin contact (corrosive, irritant). Skin contact may produce burns. Skin inflammation is characterized by itching, scaling, reddening, or, occasionally, blistering. Harmful if swallowed. May cause gastrointestinal discomfort. May cause headache, dizziness, nausea, vomiting and diarhea. Special Remarks on Toxicity to Animals Special Remarks on Chronic Effects on Humans Section 12. Ecological Information Ecotoxicity BOD5 and COD Products of Biodegradation Toxicity of the Products of Biodegradation Special Remarks on the Products of Biodegradation Section 13. Disposal Considerations Waste Information Waste Stream Waste must be disposed of in accordance with federal, state and local environmental control regulations. Section 14. Transport Information DOT (U.S.A) (Pictograms) TDG Classification TDG Class 8: Corrosive liquid. PIN UN, Proper Shipping Name, PG Maritime Transportation 1760 Corrosive liquid n.o.s.

5 Special Provisions for Transport Section 15. Other Regulatory Information and Pictograms WHMIS (Classification) Regulatory Lists Other Regulations CLASS B-3: Combustible liquid with a flash point between 37.8 C (100 F) and 93.3 C (200 F). CLASS D-1B: Material causing immediate and serious toxic effects (TOXIC). CLASS E: Corrosive liquid. No products were found. OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR ). Other Classifications HCS (U.S.A.) USA Regulatory Lists DSD (EEC) International Regulations Lists Class: Combustible liquid having a flash point between 37.8 C (100 F) and 93.3 C (200 F). HCS Class: Corrosive liquid. California prop. 65: This product contains the following ingredients for which the State of California has found to cause reproductive harm (female) which would require a warning under the statute: Ethylene Oxide < 1 ppm California prop. 65: This product contains the following ingredients for which the State of California has found to cause cancer which would require a warning under the statute: Ethylene Oxide < 1 ppm Pennsylvania RTK: Propylene Glycol Massachusetts RTK: Ethylene Oxide SARA 311/312 MSDS distribution - chemical inventory - hazard identification: Sodium Hydroxide: immediate health hazard This product is not classified according to the EU regulations. No products were found. Hazardous Material Information System (U.S.A.) Health Flammability Physical Hazard National Fire Protection Association (U.S.A.) The Hazard Ranking systems presented on this MSDS provide only a quick reference for hazard information. The ENTIRE MSDS must be consulted to determine any specific hazards, First Aid measures, and PPE associated with this product. Health Flammability Instability Specific Hazard Section 16. Other Information Validated by CRushton on 3/26/2004. Verified by CRushton. Printed 3/27/2004. Information Contact Betco Corporation 1001 Brown Avenue Toledo, Ohio Notice to Reader To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist. Validated on 3/26/2004. Cleanitizer Page: 5/6

6 Continued on Next Page