Interchange Coupling. Poppet: Interchange Coupling
|
|
|
- Erick Reed
- 6 years ago
- Views:
Transcription
1 griculture Overview Stucchi griculture Series couplings are offered with a choice of either ball or poppet valve mechanisms for automatic shut-off during disconnection. The ball mechanism is the IR series, the poppet mechanism is the IRV series. The IR series is mainly for applications where interchangeability with existing equipment is necessary. For new applications, poppet valves or flat face are recommended. Poppet: Series: IR IRV IRS Interchange: griculture/iso 5675 The series IR, IR/V hydraulic quick couplings equipped with ball or poppet sealing valve are mostly applied in agricultural equipment; interchangeable according to ISO Size 12.5 is in accordance with ISO series. - IR: ball seal valve - IRV: poppet seal valve - IRS: push pull coupling - IRS PC: push pull sleeve connectable under residual pressure Technical Characteristics & Options - Coupling constructed in carbon steel with zinc plating - Nipple made with hardened steel - Standard seals are Nitrile - NPT standard threads - On request SE, BSP threads - nti-dust plastic caps - Clip provided Nylon caps for IR12 female part 77
2 griculture MX. OPERTING PRESSURE COUPLED DESCRIPTION SIZE ISO SIZE MPa psi MPa psi MPa psi MPa psi ml IR14 1/ IR38 3/ IR12 1/ IR34 3/ IR * SPILLGE IS N INDICTIVE VLUE OF THE FLUID LOSS PER COUPLE-UNCOUPLE CYCLE. BURST PRESSURE COUPLED MLE FEMLE SPILLGE* Single acting sleeve: connection and disconnection by pulling back the sleeve High number of locking balls to reduce the Ball valves Hardened surface area to reduce the Ball valves OIL = ISO VG32, TEMP = 40C, VISCOSITY = MM²/S 78 Stucchi fax
3 Poppet: Size Diagram Female Male I E J H HEX. C F HEX. B D G BODY WEIGHT DESCRIPTION SIZE UNIT B C D E F G H I J UNIT MLE FEMLE IR14 1/4 1/4 mm kg inch lb IR38 3/8 3/8 mm kg inch lb IR12 1/2 1/2 mm kg inch lb IR34 3/4 3/4 mm kg inch lb IR mm kg inch lb
4 griculture MX. OPERTING PRESSURE COUPLED DESCRIPTION SIZE ISO SIZE MPa psi MPa psi MPa psi MPa psi ml IR14V 1/ IR38V 3/ BIR12 1/ IR34V 3/ IR100V * SPILLGE IS N INDICTIVE VLUE OF THE FLUID LOSS PER COUPLE-UNCOUPLE CYCLE. BURST PRESSURE COUPLED MLE FEMLE SPILLGE* Single acting sleeve: connection and disconnection by pulling back the sleeve Valves with swagged seal to prevent extrusion at high flow rates High number of locking balls to reduce the Poppet valves Hardened surface area to reduce the Poppet valves OIL = ISO VG32, TEMP = 40C, VISCOSITY = MM²/S 80 Stucchi fax
5 Poppet: Size Diagram Female Male I E J H HEX. C F HEX. B D G BODY WEIGHT DESCRIPTION SIZE UNIT B C D E F G H I J UNIT MLE FEMLE IR14V 1/4 1/4 mm kg inch lb IR38V 3/8 3/8 mm kg inch lb BIR12 1/2 1/2 mm kg inch lb IR34V 3/4 3/4 mm kg inch lb IR100V 1 1 mm kg inch lb
6 griculture IRV NPT and SE Thread_Poppet Style IRV NPT THRED 1/4 1/4 NPT F. IR 1/4V NPT NIPPLE 1/4 1/4 NPT M. IR 1/4V NPT 3/8 3/8 NPT F. IR 38V NPT NIPPLE 3/8 3/8 NPT M. IR 38V NPT 1/2 1/2 NPT F. BIR 12 NPT NIPPLE 1/2 1/2 NPT M.BIR 12 NPT 3/4 3/4 NPT F. IR 34V NPT NIPPLE 3/4 3/4 NPT M. IR 34V NPT 1 1 NPT F. IR 100V NPT NIPPLE 1 1 NPT M. IR 100V NPT 3/4 3/4 NPT F. IR 34V F NPT* NIPPLE 3/4 3/4 NPT M. IR 34V F NPT* IRV SE THRED 1/4 3/8 SE F. IR 14V 38 SE NIPPLE 1/4 3/8 SE M. IR 14V 38 SE * FSTER INTERCHNGE ONLY NIPPLE IRS V_Poppet Valve gricultural Push/Pull Sleeve IRS V NPT ND SE THRED 1/2 1/2 NPT F. IRS 12V NPT 1/2 1/2 SE F. I 12V SE IRS PC_Poppet Valve gricultural Push/Pull Sleeve Connect Under Pressure IRS PC NPT ND SE THRED 1/2 1/2 NPT F. IRS 12V PC NPT 1/2 1/2 SE F. I 12V PC SE 82 Stucchi fax
7 IR Ball Valve NPT Thread_Poppet Style IR BLL VLVE NPT THRED 1/4 1/4 NPT F. IR 1/4 NPT NIPPLE 1/4 1/4 NPT M. IR 1/4 NPT 3/8 3/8 NPT F. IR 38 NPT NIPPLE 3/8 3/8 NPT M. IR 38 NPT 1/2 1/2 NPT F. IR 12 NPT NIPPLE 1/2 1/2 NPT M. IR 12 NPT 3/4 3/4 NPT F. IR 34 NPT NIPPLE 3/4 3/4 NPT M. IR 34 NPT 1 1 NPT F. IR 100 NPT NIPPLE 1 1 NPT M. IR 100 NPT 3/4 3/4 NPT F. IR 34 F NPT* NIPPLE 3/4 3/4 NPT M. IR 34 F NPT* * FSTER INTERCHNGE ONLY NIPPLE IR TIC Ball Valve NPT Thread_gricultural Nipple with Seal Retainer IR TIC BLL VLVE NPT THRED NIPPLE 1/2 1/2 NPT M. IR 12 TIC NPT NIPPLE IRS Ball Valve NPT Thread_gricultural Push/Pull Sleeve IRS BLL VLVE NPT THRED 1/2 1/2 NPT F. IRS 12 NPT 83
AG INTERCHANGE IR I IRV I IRS SERIES POPPET INTERCHANGE COUPLERS Ag Style Interchange
G INTERCHNGE IR I IRV I IRS SERIES POPPET INTERCHNGE COUPLERS g Style Interchange The griculture IR Series Hydraulic Quick Couplings offer automatic shut-off during disconnection. The IR features a variety
Misc: Interchange Coupling
Wing Style Interchange Coupling Misc: Interchange Coupling Series: W Interchange: Parker 6100 - Seals: Nitrile - Threaded sleeve allows connection/disconnection under pressure - Coupler: brass material
Product Index by Coupler Style & Interchange
Product Index by Coupler Style & Interchange Flat Face Style Series Description Page # A Premier ISO 16028 Interchange Flat Face Coupling In accordance with ISO 16028 for Interchange and Performance. s:
1105 Windham Parkway Romeoville, IL USA stucchiusa.com. Stucchi USA YOUR NEXT GREAT SOLUTION Product Catalog REV018
1105 Windham Parkway Romeoville, IL 60446 USA 847.956.9720 stucchiusa.com Stucchi USA YOUR NEXT GREAT SOLUTION Product Catalog REV018 YOUR NEXT GREAT SOLUTION Stucchi, Inc. provides high-quality hydraulic
S51 Series. Thread Together, Maximum Flow with Minimum Spillage
S51 Series S A F E W A Y H Y D R A U L I C S Document No. 7951 rev. 003 Thread Together, Maximum Flow with Minimum Spillage Minimum Spill, High Flow, Heavy-Duty Quick Coupling SafeWay s S51 Series is a
FIRG-QSERIES INTERCHANGE > ISO NFPA T HTMA (size 3/8 )
RQSRS NTRAN > SO 128 NPA T3..1 TMA (size ) SO 128 TNAL ATURS AN OPTONS nterchange SO 128 NPA T3..1 TMA (size ) Available sizes Sealing description Nitrile NRKM (VTON )PM KALRZ Material /treatment onnection
FITTINGS. Pneufit C composite and Pneufit M fittings Inch Ø 1/8" to 1/2" O/D tube
Pneufit C composite and Pneufit M fittings Ø 1/8" to 1/2" Ready to use. Over 1,000 composite push-in pneumatic fittings. Releasable stainless-steel grab-ring to grip nylon or polyurethane (8 or 9 durometer).
MFD Filters (MGF Series) 8.3. MFD Mini Regulators (MSR Series) 8.4. MFD General Purpose Regulators (MGR Series) 8.5
ir Preparation Equipment MFD Filters (MGF Series) 8.3 MFD Mini Regulators (MSR Series) 8.4 MFD General Purpose Regulators (MGR Series) 8.5 MFD General Purpose Lubricators (MGL Series) 8.6 MFD Filter -
Impact resistant PBT body in black for Pneufit C and light gray for Pneufit M.
Pneufit C composite and Pneufit M fittings Ø Â" to Ë" Ready to use. Over 1,000 composite push-in pneumatic fittings. Releasable stainless-steel grab-ring to grip nylon or polyurethane (85 or 95 durometer).
Check Valves PRODUCT DESCRIPTION FEATURES & BENEFITS TECHNICAL SPECIFICATIONS
Check Valves PRODUCT DESCRIPTION CPI check valves are designed for high pressure applications where reverse flow and leakage must be kept to a minimum. Typical applications include engine, pump and compressor
In-Line Accessories. In-Line Pressure Gauges. Pressure Gauges. In-Line Accessories
Pressure Gauges Pressure gauges for monitoring system pressure Hoses and test points for sampling oil and determining ISO cleanliness levels Flanges to connect components Valves for system control In-Line
Cam & Groove Fittings. King Nipples
Cam & Groove Fittings King Nipples Index Aluminum Type A, Male Adapter x Female NPT...3 Type B, Female Coupler x Male NPT...3 Type C, Female Coupler x Hose Shank...4 Type D, Female Coupler x Female NPT...4
TECHNICAL SPECIFICATIONS. Carbon Steel / Stainless Steel One piece design BALL. Stainless Steel MAXIMUM OPERATING TEMPERATURE CRACKING PRESSURE
Check Valves PRODUCT DESCRIPTION CPI check valves are designed for high pressure applications where reverse flow and leakage must be kept to a minimum. Typical applications include engine, pump and compressor
ROTARY UNION 9000 SERIES GENERAL PURPOSE MODELS ADDED MODELS ADDED. Operating Parameters FEATURES & BENEFITS MEDIA PRESSURE* TEMPERATURE* SPEED*
ROTARY UNION 9 SERIES GENERAL PURPOSE Operating Parameters Steam, Hot Oil, Water MEDIA PRESSURE* 25 psi (Water), 75 psi (Steam), psi (Hot Oil) MODELS ADDED MODELS ADDED TEMPERATURE* 6 F (Hot Oil), 378
Mechanically actuated valves
Mechanically actuated valves /2-5/2 spool valves with /8 NPT threaded ports Installation in any position Comprehensive range of actuations, direct or servo-piloted Special versions on request Materials
Fittings, Tubing & Nipples
s, Tubing & Nipples P Series Pipe s s to 15,000 psi (1034 bar) Since 1945 utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and manufacturing
Dill Air Controls Gauge and Air Chuck Catalog
Air Controls Gauge and Air Chuck Catalog Member of Tire and Rim Association ISO Registered Organization 1903 2009 Dill # Range Comments Finish Pack Available in various colors or 5600 10-75 PSI your company
Adapters Quick Reference Guide
Adapters Quick Reference Guide Minimizing Downtime in a Variety of Industries Construction Demolition Distribution Equipment Rental Excavation Manufacturing Marine Material Handling Municipalities Recycling
Description The 4000 Series offers up to 8600 in-lb of torque and 25 gpm (continuous ratings). This is the corner stone of the Char-Lynn line.
Highlights Features ety of mounting flanges and output shafts options Benefits motor into a system tough applications Applications Description The 0 Series offers up to 0 in-lb of torque and gpm (continuous
Needle Valves. We deliver confidence through quality products
We deliver confidence through quality products INTRODUCTION NEEDLE VALVES SD range of Needle valves come in various sizes, sealing styles, end connections and stem types. They are available in bar stock
12 EEx d-conduit Material
12 EEx d-conduit Conduit Fittings Conduit fittings, BMF, with female/male union Series Nominal Ordering code Weight RN2095 BMF 1 1 /2" NPT 461 557 0 0,15 BMF 2 3 461 558 0 0,20 BMF 3 1" NPT 461 559 0 0,28
In-Line Check Valves. Features. Valves. Working Pressures to: Flow Ranges to:
Valves In-Line Check Valves Working Pressures to: Flow Ranges to: 5700 psi/393 bar 200 gpm 757 lpm Features Steel constructed check valves are compatible with all non-corrosive liquids. Valves contain
RBL High-pressure AISI 316L stainless steel. For all fluids
RBL High-pressure AISI 316L stainless steel For all fluids Connections in high-pressure circuits carrying corrosive liquids and gases... Applications - High-pressure hydrogen circuits - High-pressure circuits
components IC, PB PSCK Pressure switches Digital pressure gauges Pressure gauges GA, GS NV, FM Gauge accessories A, AH/R HLS, H, T
Pressure switches t series IC, PB PSCK t page 188 Digital pressure gauges DG 189 Pressure gauges Gauge accessories Manifolds, couplers, hoses, tubing G GA, GS NV, FM A, AH/R HLS, H, T 190 191 192 High
QUICK DISCONNECT COUPLINGS DIAGNOSTIC PRODUCTS
PROUT TLOG P1-10 PRESSURE OMPONENTS IN. QUIK ISONNET OUPLINGS IGNOSTI PROUTS VLVES PIPE, TUE N HOSE LMPS P R O V I I N G Q U L I T Y P R O U T S S I N E 1 9 8 T L E O O N T E N T S QUIK OUPLINGS 1-39 IGNOSTIS
...our linkages, your solution. Ball & Socket Joints
...our linkaes, your solution Ball & Socket ov-ball-and-socket-joints-divider - Updated - 12-01-2017 Overview Ball & Socket Ball & Socket Ball and Socket Ball and socket joints to DIN 71802 available in
Tru-Fit 10k Fittings
Tru-Fit 10k Fittings TruFit 10K Pipe and Adapter Fittings are designed and manufactured to provide a reliable connection in high pressure systems running to 10,000 psi. Manufactured from fully-traceable
NPT (LP) 3000# & 6000# FITTINGS AND SMALL DIAMETRE SCHEDULE FITTINGS A105/LF2/A106/WPB
NPT (LP) 3000# & 6000# FITTINGS AND SMALL DIAMETRE ULE FITTINGS A105/LF2/A106/WPB TYPE X X 1 CAP 20 3/4 6000LB NPT 10 A105N NACE CAP 25 1 6000LB NPT 40 A105N NACE CAP 40 1 1/2 3000LB NPT 60 A105N CAP 40
FasMate Quick Connectors Industry Applications:
FasMate Quick Connectors Industry Applications: The FasMate Series instantly seals threaded ports from vacuum up to 344.7 bar. The patented proprietary design makes sealing threaded ports as easy as 1,
D.O.T Fittings. Version 2015
D.O.T Fittings Version 2015 Revised 3/18/2015 Fax your order to: (763) 398-2590. customerservice@polyconn.com. www.polyconn.com. Questions call: (763)559-0388 3062 Ranchview Lane North. Plymouth, MN 55447
Description The 4000 Series offers up to 8600 in-lb of torque and 25 gpm (continuous ratings). This is the corner stone of the Char-Lynn line.
Highlights Features displacements, a variety of mounting flanges and output shafts Reliable, proven design High efficiency Environmental protection options Benefits Flexiblilty in designing this motor
12 series (Pneufit) Push-in fittings Ø 1/8... 1/2, Ø mm tube size, BSP and NPT threads
2 series (Pneufit) Push-in fittings Ø /8... /2, Ø 4... 2 mm tube size, SP and NPT threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage ll taper
FITTINGS & ACCESSORIES CATALOG
& ACCESSORIES CATALOG 2018/2019 ACCESSORIES ACCESSORIES GAUGES Stainless steel construction Easy to read Precision movement Color-coded gauge faces Glycerin-filled for vibration protection Built in Snubbers
Environmental Submersible Pumps
Environmental Submersible Pumps Grundfos 85S Enviro Retrofitted Submersible Pumps These Grundfos submersible pumps are made of stainless steel and retrofitted with PTFE to handle the rigors of contaminated
Ross Brown Sales Pty. Ltd. Portable Pressure/Vacuum Comparator
Ross Brown Sales Pty. Ltd. Portable Pressure/Vacuum Comparator The data provided above is for information purposes only and no warranty of accuracy or reliability is given. Page 17 of 30 Pressure Generating
AIR PREPARATION UNITS 3/4" NPT & 1" NPT SERIES
PNEUMATIC GROUP AIR PREPARATION UNITS 3/" NPT & " NPT SERIES 6 0, 0,6 0, 0,8 8 0,0 0 0 bar 6 0, 0,6 0, 0,8 8 0,0 0 0 bar 83 6 0, 0,6 0, 0,8 8 0,0 0 0 bar 6 0, 0,6 0, 0,8 0,0 0 0 bar 8 Port size Recommended
AIR PREPARATION uality DOES matter!
Qu ali ty DO E AIR PREPARATION S m at! r te AIR FILTER-REGULATOR-LUBRICATOR COMBINATION NAC 2000 01 D Model Range Body Size Port Size Manual Drain 2000 01: 1/8 NPT D Auto Drain 3000 02: 1/4 NPT 4000 03:
B16.11 FORGED 3000# & 6000# FITTINGS AND SMALL DIAMETRE SCHEDULE FITTINGS A105/LF2/A106/WPB
B16.11 FORGED 3000# & 6000# FITTINGS AND SMALL DIAMETRE ULE FITTINGS A105/LF2/A106/WPB TYPE X X CAP 15 1/2 3000LB NPT 70 A105N CAP 20 3/4 6000LB NPT 10 A105N NACE LAME ITALY CAP 25 1 6000LB NPT 40 A105N
Environmental Submersible Pumps
Environmental Submersible Pumps Grundfos 230S Enviro Retrofitted Submersible Pumps These Grundfos submersible pumps are made of stainless steel and retrofitted with PTFE to handle the rigors of contaminated
SE Optimus Combination Shower and Eye And Face Wash System EYEWASH FEATURES: SHOWER FEATURES FINISH: OPTIONS: WARRANTY:
Optimus Combination Shower and Eye And Face Wash System EYEWASH FEATURES: Independent eye wash & face wash integrated into one, multi-functioning safety unit. Aerated sprays for eyewash comfort & innovative
X-plode MULTI-PURPOSE WEIGHT LIFTING BENCH
X-plode MULTI-PURPOSE WEIGHT LIFTING BENCH by Progression Fitness Table of Contents ATTENTION: Read all precautions and instructions in this manual before using this equipment Safety precautions--------------------------------------------------------
P SERIES. 250 psi NFPA Pneumatic Cylinder TECHNICAL BROCHURE. Bore Sizes from 11/2 to 14
Actuation Solutions and Systems for the P SERIES 250 psi NFPA Pneumatic Cylinder Bore Sizes from 11/2 to 14 Actuation Solutions and Systems for the Design & Materials Temperature Ratings Low Temp. -54
Submersible. Pumps Motors. 60Hz 4 Submersible Pump. Pumping Solution
Submersible Pumps Motors Hz Submersible Pump Pumping Solution Product data Submersible bore well pumps Construction Submersible motor & pumps for deep wells of (DN mm). Sized for connection to the motor
Compressor Accessories
Compressor Accessories Series 11 Superior quality for superior performance COMPRESSOR OIL Description MINERAL 11.1100 1 litre container 11.1400 4 litre container SYNTHETIC 11.1200 1 litre container 11.1500
DURASEAL. High Integrity, Double Block and Bleed Plug Valve.
DURASEAL High Integrity, Double Block and Bleed Plug Valve www.franklinvalve.com How the DuraSeal Works An improved valve with a proven history We took an alternative path. Unlike many valve manufacturers
Model Filter. Lubricator PL2000 PL3000 PL4000 PL5000 Port size (NPT) Max. Supply Pressure Max. Operating Pressure Regulating Range.
Filter, Regulator, Lubricator Combinations PC2 PC3 MODULAR DESIGN EASY ASSEMBLY/DISASSEMBLY EASY MATENANCE FE OIL ADJUSTMENT (ONE-TOUC) BOWL GUARD ON UPC4, UPC5 REFILL UNDER PRESSURE Standard Specifications
Eaton Quick Disconnect Couplings
Eaton Quick Disconnect Couplings Eaton Quick Disconnect Couplings Customizing Solutions for the Future Hydraulics and Beyond For over 50 years, Eaton has continued to manufacture and supply the highest
Hydraulic Motor & Brake
whitedriveproducts SERIES 00-0 - 0 - HEVY DUTY Hydraulic Motor & rake DT DT (ll Series) For Heavy Duty pplications whitedriveproducts Overview series descriptions The most amazing aspect of the DT Series
Plant, components and devices for very high and high pressures (7000 bar and over)
Plant, components and devices for very high and high pressures (7000 bar and over) VALVES AND FITTINGS UP TO 1035 BAR MATERIALS All fittings are manufactured from EN 1.4404 / AISI 316L stainless steel
TEKNOCRAFT INC. Proportional Valves. Mini Valves. Outlet Balanced Valves. Standard Valves. Your Proportional Valve Specialists
TEKNOCRAFT INC. Your Proportional Valve Specialists Proportional Valves Mini Valves Outlet Balanced Valves Standard Valves Table of Contents Teknocraft Unique Designs... 3 Mini Valves... 6 Outlet Balanced
Inline Filters (F Series) Catalog 4130-F July 2005
Inline Filters (F Series) Catalog 4130-F July 2005 Catalog 4130-F Introduction Parker are designed for protection of instrumentation systems from undesirable materials. Component changes or repair and
H Series Pneumatic Screwdrivers and Nutrunners. Products and Solutions for Assembly
H Series Pneumatic Screwdrivers and Nutrunners Products and Solutions for Assembly About We are personally committed to understanding and exceeding our customers requirements. We are committed to continuously
12 series (Pneufit) Push-in fittings
> > Port size: Ø /8... /2, Ø 4... 2 mm tube size, SP and NPT threads > > Very compact units > > asy tube insertion for rapid assembly of pneumatic circuits > > Positive tube anchorage > > ll taper threads
JB90A. FS65 Balanced-Pressure Series
J90 S W I V E L J O I N T S S65 alanced-pressure Series eatures and enefits New eroquip S65 alanced-pressure Series swivel joints answer customer requests for a more cost competitive, compact product.
Ball Valves. BV & BT Series. Features. Pressure vs. Temperature. Technical Data. Pressure Ratings
Ball Valves & Series Features Any end type and size combination available upon request Adjustable stem seal can be maintained in-line Panel mountable Bi-directional flow All valves are 00% factory tested
Down-the-hole drill strings for CM 700 series
Secoroc Rock Drilling Tools Down-the-hole drill strings for CM 700 series Secoroc high quality DTH drill string equipment Atlas Copco Secoroc offers a complete DTH drill string for the CM 700 series. This
Contents. Coming soon from Teryair!!
Technical products for the ship suppl y industry Contents Teryair is a specialist manufacturer of precision pneumatic tools and marine industrial equipment. Our factories in Mumbai, India are certified
ROTARY UNION 5000 SERIES STAINLESS STEEL - GENERAL PURPOSE MODELS ADDED. Operating Parameters FEATURES & BENEFITS CONFIGURATION OPTIONS
ROTARY UNION 5 SERIES STAINESS STEE - GENERA PURPOSE Operating Parameters SPEED,, 3,6 (MT) PRESSURE 75 psi (Water), psi (Steam), psi (Hot Oil), 3 psi (Air) TEMPERATURE 3 F (Water), 35 F (Steam), 395 F
3/4" NPT 3080 MF 185-3/4-US 1" NPT 3080 MF US
Port size Recommended flow Page No. (l/min) 1/8" NPT 125 MF 007-1/8-US 111-112 1/4" NPT 125 MF 007-1/4-US 1/8" NPT 200 MF 012-1/8-US 113-114 1/4" NPT 200 MF 012-1/4-US 3/8" NPT 200 MF 012-3/8-US 3/8" NPT
AIMS Plastic Fittings
AIMS Plastic Fittings www.aimsfasteners.com 1-866 793-2474 2 About AIMS' nylon and polypropylene fittings catalog lists our most popular sizes. Also stocked, but not listed here, are many other sizes and/or
Environmental Submersible Pumps
Environmental Submersible Pumps Grundfos 300S Enviro Retrofitted Submersible Pumps These Grundfos submersible pumps are made of stainless steel and retrofitted with PTFE to handle the rigors of contaminated
SAFETY LABELS CAUTION: PINCH POINT. Make sure locking pin is fully engaged before beginning forward and side lift exercises.
CONTENTS 3 Important Safety Information 4 Assembly Instructions 6 Adjusting the Seat 6 Getting On and Off the Ab Coaster Pro 7 Ab Coaster Pro Exercises a. Forward Lift b. Side Lift (Obliques) c. Free-Style
ACFT EQUIPMENT LIST (1 X LANE REQUIREMENT)
During IOC and FOC beginning 01 OCT 18 and ending 30 SEP 20, the standard ACFT equipment set will reside at the battalion level, which will consist of fifteen lanes. ACFT equipment found within a single
RUBBER WATERBLAST HOSES
up to 15, PSI (1 Bar) RUBBER WATERBLAST HOSES These high pressure hose assemblies combine rugged construction, dependability and safe performance. Designed specifically for waterblast applications Lightweight
Air Preparation Equipment
FRLS Improve system efficiency Side-by-side and stacking units available Modular design for easy connection and maintenance Variety of port sizes from #10-30 to 1" NPT pp. 170-174 FILTERS Capture solid
type AKS and ESM Introduction
Temperature sensors type AKS and ESM Introduction Temperature sensors AKS and ESM are temperature dependent resistance sensors. The sensor unit consists of a platinum element the resistance value of which
Thank you for purchasing the AB COASTER. Our customer service staff is ready to help and to answer any questions.
Thank you for purchasing the AB COASTER. Our customer service staff is ready to help and to answer any questions. Our phone number is: 908-879-2713 The Ab Coaster Company, 173 Route 206, P.O. Box 9 Chester,
PRODUCT EQUIVALENT GUIDE
2" LIGHT WEIGHT MINING REFUELLING NOZZLES BNM800L 2" Nozzle with light shut down pressure (25-35kPa@ 400LPM) (Includes Plug & Spring AUS21A029) BNM800ML 2" Nozzle with medium light shut down pressure (45-55kPa@
FILTER REGULATORS AND PARTS
COMPRESSED AIR ACCESSORIES PRICING 5-2017 WWW.RAPIDAIRPRODUCTS.COM 800-954-3310 FILTER REGULATORS AND PARTS 175psi MAX INLET, 0-150psi adjustment range PRICE QUANTITY K93210 INLINE REGULATOR W/GAUGE, 1/4"
747 Series Stopper Plugs Cable Gland Accessories Flameproof.
747 Series Stopper Plugs Flameproof. Class I, Groups, A, B, C, D Type 4X; Ex d II Component Equipment Stopper plug is designed for use from the outside of the Idea for use on flameproof electrical equipment
15K CATALOG. 15K psi Water Blasting Parts and Accessories. Accessories. Control Guns. Fittings. Rigid Lances. Flex Lances. Hoses. Nozzles.
2015 CATALOG Always Providing Service 15K psi Water Blasting Parts and Accessories Accessories Calder Ltd Prescott Drive Warndon Worcester WR4 9NE United Kingdom Control Guns web: email: tel: fax: www.calderltd.com
Escalade International Limited
Motion Elliptical Product Code: ER3000D Escalade International Limited Pleasant Road, Penllergaer, Swansea. SA4 9GE Tel: 00 44 1792 222 550 Fax 00 44 1792 895 781 www.escaladesports.co.uk info@escaladesports.co.uk
Today s Improved Compressed Air Piping Method
STEP 1 STEP 2 STEP 3 (see page 8 for detailed instructions) Today s Improved Compressed Air Piping Method FAST INSTALLATION TIME -Aluminum piping is easy to cut and lift -O-ring seals ensure a leak free
English English CONDENS
2014 English English CONDENS TUBEST s.a.s. plans, manufactures and trades metallic flexible liners mainly in stainless steel, to answer to many industries needs and this. since 1925: flexible liners, pipe
Interchange. Updated April 2009 (Rev. I) 4040 Norex Drive Chaska, Minnesota U.S.A. Phone: (952) Fax: (952)
Hydraulic Quick Coupling Interchange Updated April 2009 (Rev. I) Through the years, SafeWay Hydraulics, Inc. has accumulated the interchange information found within this booklet. Although we are reasonably
SAFETY LABELS CAUTION: PINCH POINT. Make sure locking pin is fully engaged before beginning forward and side lift exercises.
CONTENTS 3 Important Safety Information 4 Assembly Instructions 6 Adjusting the Seat 6 Getting On and Off the Ab Coaster Max 7 Ab Coaster Max Exercises a. Forward Lift b. Side Lift (Obliques) c. Free-Style
Adapters, Couplers and Fittings.
Adapters, Couplers and Fittings www.alliedhpi.com 1 Table of Contents QUICK-CONNECT ADAPTERS AND COUPLERS Chemetron Quick-Connect Adapters 3 Chemetron Quick-Connect Adapters ISO 4 Chemetron Quick-Connect
Buffer Seals. Product Description: Part Numbers: Buffer Seals. Caterpillar Equivalent Styles. Imperial Seals R (TFE)
Materials: Temp. Range 15% Glass, 5% Moly PTFE -73 C to 260 C 40% Bronze PTFE -73 C to 260 C Nylon -54 C to 121 C Low Temp. Nitrile -54 C to 116 C Nitrile -40 C to 120 C Viton /Fluorocarbon -29 C to 204
BROEN UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM
BROEN UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / ACUUM LAB TABLE OF CONTENTS Content Page Table of Content 2 Product Overview 3 BROEN UniFlex TM BASIC 4-5 Fittings for Non-burnig 2.0 Gases/acuum Turret
Installation, operation and service manual BMA 05
BMA 05 Please read this manual carefully before installing and using the BMA 05 safe measuring coupling. Wigersma & Sikkema warranty obligations do not apply in case of non-observance of this manual. 1
Quick Sealing with a Twist to Connect Actuation Method
- Finger tighten seals up to 689 bar (10,000 psi) for pneumatic and hydraulic testing - Safe and Reliable leak tight connections to male and female threads - Eliminate thread damage, sealant and wrenches
INSTRUCTION MANUAL LEG PRESS (NEW MODEL) OPTION OF K2 GYM
INSTRUCTION MANUAL LEG PRESS (NEW MODEL) OPTION OF K2 GYM QUESTION? As a quality home gym supplier we are committed to your complete satisfaction. If you have questions, or find missing or damaged parts,
J350, J360 and J370 PLUMBING PARTS CATALOG
PREMIUM J0, J0 and J0 PLUMBING PARTS CATALOG PUMP Pump/Motor # * 0 * 00- HOUSING: FRONT 00-0 O-RING: FRONT HOUSING 00- IMPELLER:. DIA 00-0 PUMP: SEAL ASSY / VITON 00- HOUSING: REAR BRACKET 00-0 MOTOR:.HP
Thank you for purchasing the AB COASTER. Our customer service staff is ready to help and to answer any questions.
Thank you for purchasing the AB COASTER. Our customer service staff is ready to help and to answer any questions. Our phone number is: 908-879-2713 The Ab Coaster Company, 173 Route 206, P.O. Box 9 Chester,
a state of the art 04-23 24-29 29 30-34 36 37-45 REVERSE OSMOSIS SYSTEMS Traditional Systems / Economic Series 1520059001 EC-105 :: STANDARD 5 FILTER RO SYSTEM 1520059002 EC-106 :: STANDARD 6 FILTER RO
SERVING THE DEWATERING MARKETS
ELECTRIC ELECTRIC SERVING THE DEWATERING MARKETS ABOUT MODY, INC..... The Initial Start in India. The roots of Mody Pumps, Inc. began in India in 1957, almost 5 years ago by D.N. Mody; a successful businessman
Click the column to open specific parts pages FLOAT KITS MACHINE
Click the column to open specific parts pages FLOAT KITS LIFT FLOAT KITS ANGLE FLOAT KITS MACHINE 7434571 8126346 8126326 8126327 8126355 8126356 8126335 8126336 8126337 8126351 8126338 8126352 8126261
Installation, operation and service manual BMA 04
BMA 04 Please read this manual carefully before installing and using the BMA 04 safe measuring coupling. Wigersma & Sikkema warranty obligations do not apply in case of non-observance of this manual. 1
Dynalene Propylene Glycol Series
Dynalene Propylene Glycol Series Inhibited Propylene Glycol Heat Transfer Fluids Process Applications HVAC/R Food & beverage Solar Applications Thermal Storage Process cooling & heating Ice & snow melting
WORKOUT ONE, TWO & THREE COMPLETES FOR TIME: WORKOUT 3 - ATHLETE C - FOR TIME 3 ROUNDS OF 10 BACKSQUATS 20 TOES TO BAR
PRESENTED BY COMPLETES FOR TIME - - FOR TIME 10 20 TOES TO BAR - ATHLETE B - FOR TIME 15 15 DEFICIT HSPU WORKOUT 3 - - FOR TIME 20 10 RING MUSCLE-UPS TIME CAP / 15 MIN EACH SCORE / EACH COUPLET IS INDIVIDUALLY
THOMAFLUID - Handbook III
Reichelt Chemietechnik GmbH + Co. THOMAFLUID - Handbook III Capillary Connectors Micro Connectors Macro Connectors Pipe Connectors Welding Sleeves Bonded Socket Joints Plug-in Connectors HPLC Connectors
COST, PROCESS & QUALITY IMPROVEMENT
COST, PROCESS & QUALITY IMPROVEMENT - Finger tighten seals up to 10,000 psi (689 bar) for pneumatic and hydraulic testing - Safe and Reliable leak tight connections to male and female threads - Eliminate
Control Panel Regulators
Control Panel Regulators Modular design for service & interchangeability Non-rising adjustment knob with push-pull lock ring feature Small package size and light weight construction Competitively priced
RBE modular quick-release coupling range All fluids
RBE modular quick-release coupling range All fluids The right solution Applications Gas: hydrogen, argon, nitrogen, helium... Steam Solvents, acids Liquids High pressure Process vacuum... In all industrial
Premium Chemical Free Iron/Sulphur Filter Installation Manual
Premium Chemical Free Iron/Sulphur Filter Installation Manual 220 Bayview Avenue Unit 18 Barrie, Ontario, Canada, L4N 4Y8 www.excaliburwater.com EXCALIBUR PREMIUM CHEMICAL FREE IRON/SULPHUR FILTER INSTALLATION
Description. Specifications and Ordering Information Proximitor Sensor / interface module/ VDC Housings
Specifications and Ordering Information Proximitor Sensor / interface module/ VDC Housings R Description Although Proximitor and interface are rugged by design, these units and their electrical connections
Volumetric Infusion Pumps INFUSIONMANAGEMENT
Volumetric Infusion Pumps when accuracy matters INFUSIONMANAGEMENT VOLUMETRIC INFUSION PUMPS Specification - Volumetric Infusion Pump Weight 5kg Dimensions Operating temperatures Including pole clamp Height