MATERIAL SAFETY DATA SHEET

Transcription

1 MATERIAL SAFETY DATA SHEET Supplier ACCO Australia Pty. Ltd. Level 2, 8 Lord Street Botany NSW 2019 Phone: Emergency Phone: Monday to Friday, 9am to 5pm for general information only. Product Identification Product Name: Whiteboard Cleaner Other names: None Supplier Product Code: Recommended Use: Cleaning of whiteboards erase marker ink Hazards Identification Hazardous Classification: Classified as Hazardous & Non-dangerous (Category ii) according to the criteria of the National Occupational Health and Safety Commission and the ADG Code (i) Hazardous substance. dangerous goods; or (ii) Hazardous substance. non-dangerous goods; or (iii) Dangerous goods. non-hazardous substance. Applicable Risk Phrases: Causes serious eye irritation Applicable Safety Phrases: Serious eye damage/ eye irritation Composition / Information on Ingredients Ingredients: Chemical Name Chemical s Common Name or Proportion CAS Number Abbreviation (%) Third Party Formulation Trade Secret Proprietary Third Party Formulation Trade Secret Proprietary Third Party Formulation Trade Secret 3-7 Proprietary Third Party Formulation Trade Secret Proprietary First Aid Eye: Skin: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do so. Continue rinsing. Keep eye wide open while rinsing. Do not rub the affected area. Get medical attention if irritation develops and persists. Wash with soap and water. Consult a physician if irritation occurs and persists MATERIAL SAFETY DATA SHEET- Page 1 of 5

2 Inhaled: Swallowed: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, trained personnel should give oxygen. Rinse mouth immediately and drink plenty of water. Never give anything by mouth to an unconscious person. Do NOT induce vomiting. Call a physician. Advice to Doctor: Symptoms Burning sensation. Effects of exposure (inhalation, ingestion or skin contact) to substance may be delayed. Fire Fighting Measures Extinguishing Media: CO2, foam, dry chemical. Water may be inefficient Hazards from Combustion Products: Carbon Oxides Specific Hazard: No information available Special Fire Fighting Recommendations: Wear self-contained breathing apparatus HAZCHEM Code (if available): Accidental Release Measures Emergency Procedures: Avoid contact with skin, eyes and clothing. Use PPE as required. Prevent entry into waterways, sewers, basements and confined areas. Spills & Disposal: Handle as non-flammable liquid and dispose of in properly ventilated area. Prevent further leakage or spillage if safe to do so. Transfer to properly labelled containers. Handling & Storage Precautions for Safe Handling: Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes or clothing. Do not eat, drink or smoke when using this product. Take off contaminated clothing and wash before re-use. Conditions for Safe Storage: Store in a dry, cool and well-ventilated area. Keep away from heat sources of ignition. Incompatible Products are strong oxidising agents, acids and chlorinated compounds. Exposure Controls / Personal Protection Exposure Standards: Chemical Name ACGIH TLV OSHA PEL NIOSH IDLH STEL: 1000 ppm TWA: 1000 ppm TWA: 1900 mg/m3 IDLH: 3300 ppm TWA: 1000 ppm STEL: 400 ppm TWA: 200 ppm TWA: 400 ppm TWA: 980 mg/m3 (vacated) TWA: 400 ppm (vacated) TWA: 980 IDLH: 2000 ppm 10% LEL TWA: 980 mg/m3 TWA: 3 mg/m3 inhalable fraction TWA: 3.5 mg/m3 (vacated) TWA: 3.5 mg/m3 IDLH: 1750 mg/m3 TWA: 3.5 mg/m3 TWA: 0.1 mg/m3 Carbon black in presence of Polycyclic aromatic hydrocarbons PAH MATERIAL SAFETY DATA SHEET- Page 2 of 5

3 - IDLH: 100 mg/m3 Cu dust TWA: 5 mg/m3 inhalable fraction excluding metal working fluids, highly & severely refined TWA: 5 mg/m3 (vacated) TWA: 5 mg/m3 IDLH: 2500 mg/m3 TWA: 5 mg/m3 STEL: 10 mg/m3 - IDLH: 100 mg/m3 Cu dust Biological Limit Values: None Engineering Controls: Use in a well-ventilated area. Eyewash stations and showers. Personal Protection: NIOSH/MSHA approved respirator with organic vapour cartridge if exposure limits are exceeded when handling in bulk. Positive pressure supplied air respirators may be required for high airborne contaminant concentrations. Chemical resistant gloves when handling in bulk. Wear safety glasses with side shields or goggles. Physical & Chemical Properties Appearance: Odour: Ph: 7 Vapour Pressure: Vapour Density: Boiling Point/Range: Freezing/Melting Point: Solubility: Specific Gravity/Density: 1 Percent Volatile: Flash Point: UEL/LEL in Air: Ignition Temperature: Other Properties: Flammability: Solid multiple colours Mild odour In water Stability & Reactivity Chemical Stability: Stable under recommended storage conditions Conditions to Avoid: Heat and ignition source Incompatible Materials: Strong oxidising agents. Acids. Chlorinated compounds Hazardous Decomposition Products: Carbon Oxides Hazardous Reactions: None under normal processing MATERIAL SAFETY DATA SHEET- Page 3 of 5

4 Toxicological Information Acute Effects: None known Eye: Skin: Inhaled: Swallowed: Chronic Effects: None known Specific test data for the substance or mixture is not available. Causes serious eye irritation. (based on components). May cause redness, itching, and pain Specific test data for the substance or mixture is not available. May cause irritation. Prolonged contact may cause redness and irritation Specific test data for the substance or mixture is not available. May cause irritation of respiratory tract Specific test data for the substance or mixture is not available. Ingestion may cause irritation to mucous membranes. Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea. Ecological Information Exotoxicity: Toxic to aquatic life with long lasting effects Persistence / Degradability: No information available Mobility: Not known Disposal Considerations This material, as supplied, is not a hazardous waste according to Federal regulations (40 CFR 261). This material could become a hazardous waste if it is mixed with or otherwise comes in contact with a hazardous waste, if chemical additions are made to this material, or if the material is processed or otherwise altered. Consult 40 CFR 261 to determine whether the altered material is a hazardous waste. Consult the appropriate state, regional, or local regulations for additional requirements Transport Information UN Number: Not classified UN Proper Shipping Name: Dangerous Goods Class: Subsidiary Risk: Packaging Group: Special Precautions for User: Hazchem Code: Regulatory Information Poisons Schedule Number: not a scheduled poison. Other Information Abbreviations and Acronyms Used: none. MATERIAL SAFETY DATA SHEET- Page 4 of 5

5 References: Manufacturers Material Safety Data Sheet. National Code of Practice for the Preparation of Material Safety Data Sheets, 2 nd Edition [NOHSC:2011(2003)]. NOHSC List of Designated Hazardous Substances [NOHSC:10005]. Recommendations on the Transport of Dangerous Goods, UN Committee of Experts on the Transport of Dangerous Goods. Australian Code for the Transport of Dangerous Goods by Road and Rail, by the National Road Transport Commission. Manufacturers Safety Data Sheet Revisions Date of Revision: 15/03/2016. Reason for Revision: Update as out of date and changes from Manufacturers SDS. The product should not be used for purposes other than those shown in Section 1 without first referring to the supplier in obtaining written handling instructions. As the specific conditions of use for the product are outside the supplier's control, the user is responsible to ensure that the requirements of the relevant legislation are complied with. The information contained in this safety data sheet is based on the present state of knowledge and current National legislation. It provides guidance on health, safety and environmental aspects of the product and should not be construed as any guarantee of technical performance or suitability for particular applications. The information contained in this Material Safety Data Sheet comes from sources believed to be accurate or otherwise technically correct. The user should review any recommendations in the specific context of the intended use to determine whether they are appropriate. MATERIAL SAFETY DATA SHEET- Page 5 of 5