with Ø Ø 1.5 mm Titanium Screws distributed by ARCS Alveolar Reconstruction System E

Transcription

1 Alveolar Reconstruction System with Ø Ø 1.5 mm Titanium Screws distributed by ARCS Alveolar Reconstruction System with Ø 1 mm Steel Screws E

2 E (0) / A strong alliance The managing directors of the companies Mondeal Medical Systems GmbH (Mr. Arno Fritz) and Helmut Zepf Medizintechnik GmbH (Mr. Patrick Zepf) have decided to collaborate in order to use common synergies in the production and distribution of micro screws for dental surgery. For this reason, Helmut Zepf has stopped the production of titanium micro screws. From now on, the company Helmut Zepf and its world-wide dealer network with its ideal access to the dental world will distribute the screws from the company Mondeal (ARCS). Helmut Zepf will continue to produce and distribute the steel screws of 1 mm. Attached you will fi nd our new product fl yer, offering the practitioner a high fl exibility in composing his micro screw sets without overloading them. As renowned companies in medical technology, we jointly undertake to offer competent solutions which are in line with market requirements. Our trade partners will enable our customers who already dispose of a Helmut Zepf CMF System to continue to use the new screw systems in an uncomplicated way. We are looking forward to hearing from you. Yours faithfully,

3 E All medical devices indicated here bear the CE mark according to the Medical Device Directive 93/42/EEC. * Product higher than class I. Notifi ed body will be indicated in the delivery note. zepf-dental.com 3 1 mm CMF Steel Screws Self-retaining, PU: 5 pieces, Color Pin green S* Ø 1.0 x 4 mm S* Ø 1.0 x 6 mm S* Ø 1.0 x 8 mm S* Ø 1.0 x 10 mm Color Pin green included in each packing unit (5 pieces) of screws An easy identifi cation of the screws is guaranteed by using the length markers in the tray. The colored pin with length marking is assigned to the respective screw diameter, thus allowing the determination of the screw length and a clear lot traceability in the box. Drill for 1 mm CMF Steel Screws Working Length (WL) Connection * Ø 0.75 x 30 mm 10 mm Dental 60 mm, DENTAL CMF Blade, long CMF Blade, short 15 mm, DENTAL CMF Blade, long, Ø 1.2 mm, self-retaining CMF Blade,short, Ø 1.2 mm, self-retaining CMF Blade Holder with Blade CMF Blade Holder, Ø 1.2 mm Screwdriver Handle Screwdriver Handle, small, 9 cm

4 All medical devices indicated here bear the CE mark according to the Medical Device Directive 93/42/EEC. * Product higher than class I. Notifi ed body will be indicated in the delivery note E (0) / Titanium Screws Regular Self-tapping, PU: 5 pieces, including Color Pin 1.2 mm MCD Screws 1.2 mm CROSS-FIT Screws ARCS Alveolar Reconstruction System * Ø 1.2 x 4 mm * Ø 1.2 x 5 mm * Ø 1.2 x 6 mm * Ø 1.2 x 7 mm * Ø 1.2 x 8 mm * Ø 1.2 x 4 mm * Ø 1.2 x 5 mm * Ø 1.2 x 6 mm * Ø 1.2 x 7 mm * Ø 1.2 x 8 mm Color Pin white * Ø 1.2 x 11 mm Color Pin white * Ø 1.2 x 11 mm * Ø 1.2 x 13 mm * Ø 1.2 x 13 mm * Ø 1.2 x 15 mm * Ø 1.2 x 15 mm 1.5 mm MCD Emergency Screws * Ø 1.5 x 4 mm * Ø 1.5 x 6 mm * Ø 1.5 x 11 mm 1.5 mm CROSS-FIT Emergency Screws * Ø 1.5 x 4 mm * Ø 1.5 x 6 mm * Ø 1.5 x 11 mm Color Pin blue * Ø 1.5 x 13 mm * Ø 1.5 x 15 mm Color Pin blue * Ø 1.5 x 13 mm * Ø 1.5 x 15 mm Drill for Screws Regular for angled handpiece Working Length (WL) Connection * Ø 1.0 x 20 mm 5 mm Dental * Ø 1.0 x 23 mm 8 mm Dental * Ø 1.0 x 25 mm 10 mm Dental * Ø 1.0 x 30 mm 15 mm Dental for the drilling of the gliding hole in the bone graft Working Length (WL) Connection * Ø 1.4 x 23 mm 10 mm Dental * Ø 1.5 x 23 mm 10 mm Dental

5 E All medical devices indicated here bear the CE mark according to the Medical Device Directive 93/42/EEC. * Product higher than class I. Notifi ed body will be indicated in the delivery note. zepf-dental.com 5 Blades, long Instruments ARCS Alveolar Reconstruction System CROSS-FIT Blade, long, self-retaining SK MCD Blade, long, self-retaining Holding Device consisting of blade, not self-retaining, Sleeve and Tension Sheath CROSS-FIT Holding Device, 3 parts, with CROSS-FIT Blade SL MCD Holding Device, 3 parts, with SKO-4001 MCD Blade Screwdriver Handle, 9 cm Instruments with Dental Connection for Handle Screwdriver Handle, small, 9 cm Blades, long Blades, short, 20 mm SK SK SK CROSS-FIT Blade, long, self-retaining MCD Blade, long, self-retaining CROSS-FIT Blade, short, self-retaining MCD Blade, short, self-retaining Holding Device SK SK CROSS-FIT Holding Device MCD Holding Device

6 All medical devices indicated here bear the CE mark according to the Medical Device Directive 93/42/EEC. * Product higher than class I. Notifi ed body will be indicated in the delivery note E (0) / Titanium Micro-Mesh Indications: For stable coverage of large bone defects after fi lling with autologous bone grafts or bone regeneration materials. ARCS Alveolar Reconstruction System Resting time of the titanium mesh: approx. 3-4 months. PU: Micro-Mesh, Thickness: 0.1 mm Micro-Mesh, Thickness: 0.2 mm Article Number Length x Width x Thickness Article Number Length x Width x Thickness * 100 x 60 x 0.1 mm * 100 x 60 x 0.2 mm Titanium Membranes Indications: For the covering of medium and small bone defects as barrier between gingiva and bone. Three-dimensional augmentation of alveolar crest optionally in combination with autologous bone grafts or bone regeneration materials. ARCS Titanium Membrane Article Number Length x Width x Thickness * 30 x 25 x 0.02 mm The Titanium Membranes can be customized! Resting time of the Titanium Membrane: approx. 2-4 months. PU: Universal Crown Scissors TC What is? TC stands for Tungsten Carbide, a material whose superior strength wear resistance and hardness are its major properties that distinguish it from conventional materials. Universal Crown Scissors 12 cm

7 E All medical devices indicated here bear the CE mark according to the Medical Device Directive 93/42/EEC. * Product higher than class I. Notifi ed body will be indicated in the delivery note. zepf-dental.com 7 Microplates Thickness: 0.6 mm / PU: ARCS Alveolar Reconstruction System Article Number Description Article Number Description * 4-hole Plate straight * 8-hole Plate straight Article Number Description More Microplates please find in the brochure MICRO * 6-hole X-Plate Bone Mill to crush autologous bones, with helically toothed milling part Advantages of the Bone Mill: easy handling quick assemby / disassembly without additional tools no loss of bone material (even in the case of small quantities) easy cleaning Extension Bar for the rotary handle , to increase the lever effect Helical toothed Milling Part for Bone Mill and to be mounted in / (This new milling part can be ordered and subsequently be mounted in an older type of Bone Mill by the user himself).

8 All medical devices indicated here bear the CE mark according to the Medical Device Directive 93/42/EEC. * Product higher than class I. Notifi ed body will be indicated in the delivery note E (0) / Augmentation Kit Augmentation Kit Reasons for reconstruction of alveolar ridge arise out of defects in the jaw ridge areas. The most frequent causes are: Atrophy of the alveolar ridge and extraction defects. Out of aesthetic reasons alone, in visible areas, these defects need to be reconstructed. The augmentation is carried out with autologous bone and titanium foil. The bone implants are covered with a titanium foil after application. To avoid dislocation of the augmentation material below the membrane, the membrane is fixed with at least 2 pins * Membrane Pin Titanium Pin, reinforced, Ø 1 mm, shank 0.8 mm, plate Ø 3.5 mm, 6 mm long, specifi cally for soft tissue grafting OPTION Applicator for membrane pin OPTION The titanium pins with 3 mm or 5 mm length are taken out of the storage box by means of the applicators and pressed into the bone through the foil or membrane Storage Box for 10 titanium pins, OPTION

9 E All medical devices indicated here bear the CE mark according to the Medical Device Directive 93/42/EEC. * Product higher than class I. Notifi ed body will be indicated in the delivery note. zepf-dental.com 9 Illustration Article Description Order Quantity set Augmentation Kit, consisting of: Pin Membrane Probe, Pin Applicator, Perforation Raspatory, Sinus 7 Instrument, Titanium Pin 3 mm (10 pieces) / 5 mm (5 pieces), Sinus Elevator # 2, Mixing Cup, Storage Box, 1/2 Washbasket with Lid Pin Membrane Probe with -Design handle Pin Applicator Perforation Raspatory Sinus 7 Instrument acc. to Kirsch, Spoon Ø 6.0 mm / fl exible Plugger Ø 5.0 mm pieces Titanium Pin, 3 mm (10 pieces included in the set) pieces Titanium Pin, 5 mm (5 pieces included in the set) Pin Remover, to remove membrane pins Mixing Cup, stainless steel, with plastic lid, Ø 4 cm Storage Box for 15 titanium pins Storage Box for 5 membrane pins and 10 titanium pins OPTION Storage Box for 10 titanium pins, optional, if a compact solution is requested

10 All medical devices indicated here bear the CE mark according to the Medical Device Directive 93/42/EEC. * Product higher than class I. Notifi ed body will be indicated in the delivery note E (0) / Universal Toolbox for the The universal tool box is used for storing the tools for the sets CMS + ARCS. The tool box offers enough space for the following items: Screwdriver handle, big and small, each with dental connection, in the new optimized -Design. They have a socket for exchangeable blades of all different diameters. The use of the handles is easy and intuitive while changing the blades. The blade holder allows an extra secure fixing of the screw heads on the blade insert. The pilot drills and the slide hole drill both have a graduation to allow a safe depth orientation. The inserting assistant is used for areas with tight space conditions. The Pin Applicator which fi ts in the screwdriver handles completes the set for fastening foils and membranes CMF-Box for Screw Systems Ø 1.0 mm, Ø 1.2 mm and Ø 1.5 mm Pin Applicator with dental connection Screw Rack for the Universal Toolbox The Screw Racks are available in the following confi gurations: Screw Rack Ø 1.0 / 1.2 mm each 4 rows + 2 rows Ø 1.5 mm to accommodate 5 screws Screw Rack Ø 1.2 / 1.5 mm each 5 rows to accommodate 5 screws The packing unit for the screws is 5 pieces. An easy identifi cation of the screws is guaranteed by using the length markers in the tray. The colored pin with length marking is assigned to the respective screw diameter, thus allowing the determination of the screw length and a clear lot traceability in the box Screw Rack Ø 1.2 / 1.5 mm each 5 rows to accommodate 5 screws Screw Rack Ø 1.0 / 1.2 mm each 4 rows + 2 rows Ø 1.5 mm to accommodate 5 screws

11 E All medical devices indicated here bear the CE mark according to the Medical Device Directive 93/42/EEC. * Product higher than class I. Notifi ed body will be indicated in the delivery note. zepf-dental.com 11 Washbasket for the Following the Zepf-Care Series, the modularly composable components for the CMF SYSTEM were developed, offering a washbasket with appropriate combination options. The actual tools can be organized depending on the desired diameter. This guarantees an RKI compliant reprocessing of the CMF SYSTEM. Accessories for the Washbasket Washbasket 1/1 as rack for the remaining components Boxes Dimensions 85 x 75 x 22 mm (L x W x H) Box for Screws Ø 1.0 mm Screw and Pin Box for 2 x 5 screws Ø 1.2, 1 x 5 screws Ø 1.5, 10 membrane pins and a small storage space for instruments, membranes, bone plates etc Screw and Pin Box for 3 x 5 screws Ø 1.0, 10 membrane pins and a small storage space for instruments, membranes, bone plates etc Box for receiving e.g. titanium plates Confi guration Example Mixing Cup with lid, stainless steel, Ø 4 cm Universal Instrument Rack Profi le for instruments with individual water jet cutting

12 All medical devices indicated here bear the CE mark according to the Medical Device Directive 93/42/EEC. * Product higher than class I. Notifi ed body will be indicated in the delivery note E / System Color Coding The aim of an osteosynthesis is the rapid and complete regeneration of the damaged bone function. The CMF System and the ARCS System provide optimal and uncomplicated set solutions for every customer preference. The steel screws of a diameter of 1.0 mm and the titanium screws of diameters of 1.2 mm and 1.5 mm can be confi gured individually. There is no limit to equip the system for different indications. Ø 1.0 mm Steel Color Pin green Ø 1.2 mm Titanium As the customer can just select the articles he really needs, an overloading of the system will be avoided. Color Pin white 1.5 mm Titanium Features of the CMF-System / ARCS System Coated universal toolbox, fixable, for individual equipping The racks for carrying the screws can also be marked with exchangeable screw indicators for clear identification of the screws Pin carrier in the screw box to extend the system practically with a pin set for fixing membranes -Space for carrying meshes and mini plates The tight secure fi t of the screws on the screwdriver with self-retaining function enables a secure take up and positioning. The self cutting Phillips screws offer a superior stability and optimal inserting in osseous structures. Color Pin blue An easy identifi cation of the screws is guaranteed by using the length markers in the tray. The colored pin with length marking is assigned to the respective screw diameter, thus allowing the determination of the screw length and a clear lot traceability in the box. HELMUT ZEPF MEDIZINTECHNIK GMBH FACTORY FOR DENTAL & SURGICAL INSTRUMENTS Obere Hauptstr Seitingen-Oberfl acht, Germany Tel.: +49 (0) / Fax: +49 (0) / zepf-dental.com