AdheSE One F Click & Bond with

Transcription

1 AdheSE One F Click & Bond with the VivaPen Economical and convenient to use

2 AdheSE Click & Bond High level of convenience AdheSE One F is a self-etching, light-curing, fluoride-releasing, single-component adhesive for direct restorations (composites, compomers). The popular VivaPen allows AdheSE One F to be applied easily, quickly and economically. Everything well in hand The VivaPen features a unique, ergonomic design that keeps your hand in a natural position and allows you to apply AdheSE One F in a relaxed manner. The slim, pen-like shape and the angled brush cannula are modelled after the timetested design of dental instruments. ADVANTAGES AT A GLANCE AdheSE One F VivaPen Time-saving: one step, one layer Consistently high bond strength on enamel and dentin High fluoride release Storage at room temperature Easy and convenient direct application Economical dispensing of material Good accessibility of all cavities Simple disinfection with disinfectant wipes or protection with the VivaPen sleeve

3 One F Economical use Time-saving direct application AdheSE One F is applied quickly and easily in only a few working steps: Snap on VivaPen brush cannula and rotate it to the desired position. Press click mechanism several times until the flocked VivaPen cannula is wetted with AdheSE One F. Apply a layer of AdheSE One F and thoroughly brush it into the tooth structure for 20 seconds. Quelle: Dr. A. Peschke, Ivoclar Vivadent AG, Schaan Remove excess material with a strong stream of air and light-cure for 10 seconds. Efficient dispensing The VivaPen allows AdheSE One F to be exactly dosed and applied where needed. Therefore, no material is wasted. In addition, the snap-on cannula has been specifically designed with minimal residual volume to minimize waste. The integrated fill-level indicator allows reliable control of the amount of adhesive that remains in the VivaPen. As the exact amount of AdheSE One F required is dispensed each time, there is sufficient adhesive for around 120 applications. Minimal residual material Considerable amount of residual material VivaPen snap-on cannula vs. Conventional metal cannula Ordering information Article number AN Delivery form/contents AdheSE One F Refill 1 x 2 ml AdheSE One F in the VivaPen 100 VivaPen snap-on cannulas 20 VivaPen sleeves AN AdheSE One F Refill 3 3 x 2 ml AdheSE One F in the VivaPen 300 VivaPen snap-on cannulas 20 VivaPen sleeves Refill VivaPen snap-on cannulas (100 pcs.) Refill VivaPen-Schutzhüllen (300 pcs.) Click &

4 Lasting adhesion MPa AdheSE One F Shear bond strength after 24 h Enamel Dentin AdheSE One ibond SE* Adper Easy Bond* Xeno V* Optibond All-in-One* G-Bond* *) not a registered trademark of Ivoclar Vivadent AG Source: R&D Ivoclar Vivadent AG, Schaan, January 2009 Strong bond on enamel and dentin A single layer of AdheSE One F is enough to establish a long-lasting bond to the tooth structure. Due to the low ph value of 1.4, a pronounced etch pattern is produced on enamel. As the composition of AdheSE One F has been optimized, considerably higher bond strengths are achieved on enamel with this adhesive than with AdheSE One. When AdheSE One F is applied to prepared dentin, the smear layer adhering to the dentin is dissolved and becomes part of the hybrid layer consisting of collagen and adhesive. Enamel etching pattern of AdheSE One F Source: R&D Ivoclar Vivadent AG, Schaan, January 2009 High fluoride release A source of fluoride has been added to AdheSE One F which enables fluoride ions to be released from the material. ppm/cm Cumulative fluoride release Time (in days) Source: R&d Ivoclar Vivadent AG, Schaan, January 2009 Storage requirements of single-component self-etching adhesives AdheSE One F Room temperature ibond SE* Adper Easy Bond* Optibond All-in-One* Clearfil S 3 Bond* G-Bond* recommended Storage at room temperature without compromising the bond strength The non-acid resistant monomers employed in many self-etching all-in-one adhesives require these products to be refrigerated in order to slow down their degradation. Because of the patented monomers used in AdheSE One F, the product can be stored at room temperature without compromising its quality from the first to the last click. *) not a registered trademark of Ivoclar Vivadent AG Source: Information provided by the manufacturer, January 2009 Bondwith the VivaPen

5 One F Ergonomic, recessed grips Control of the remaining amount of material Exact and economical dispensing Precise application and gentle brushing Good accessibility of all cavities Dr A. Pfannkuch / Germany Dr N. Bartling / Switzerland Dr L. Enggist / Liechtenstein Dr H. Streit / Germany

6 Festsitzende Direct Restoratives Prothetik AdheSE One F forms a part of the Direct Restoratives product category. The products of this category cover the procedure involved in the direct restoration of teeth from preparation to restoration care. The products are optimally coordinated with each other and enable successful processing and application. OptraGate AdheSE One F Tetric EvoCeram Bluephase OptraPol Proxyt PREPARE BOND fil cure finish MAINTAIN THESE ARE FURTHER PRODUCTS OF THIS CATEGORY: Bluephase The curing light Style OptraGate Latex-free lip and cheek retractor The smallest LED for every use Every hand comfortable to hold for men and women Every material universal use due to Polywave LED with broadband spectrum Every time optional corded operation due to Click & Cure The gentle solution for a better view Considerably enlarged access to the treatment field Enhanced patient comfort due to three-dimensional flexibility Wide range of indications Would you like to know more about the products of the Direct Restoratives category? Simply get in touch with your contact person at Ivoclar Vivadent or visit for more information. Ivoclar Vivadent AG Bendererstr Schaan Liechtenstein Tel / Fax +423 / Descriptions and data constitute no warranty of attributes. Ivoclar Vivadent AG, Schaan / Liechtenstein /en/