Base S D T B

Transcription

1 SD-00/000 RoHS compliant INTERNAL STRUCTURE SD-00 / 000 series FEATURES RoHS compliant Fine click with metallic spring Low profile of 3.9 mm makes perfect for high density board mounting applications Gold plated contact provides excellent reliability Cross and minus slot are available Terminal pin arrangement Part name Housing Metallic spring O ring Insert rotor Base Material Polyphenylenesulphide Stainless (SUS 30) Silicone rubber Rotor : Polyamide Pattern : Copper alloy, Gold-plated Polyphenylenesulphide Flammability UL-9V-0 UL-9HB UL-9V-0 UL-9V Contact Terminal pin Copper alloy, Gold-plated CFCs, Halon, Carbon tetrachloride and designated bromic flame retardant PBBOs and PBBs are not used in our products. PART NUMBER DESIGNATION Series name No. of positions 6 positions positions Shape of rotor 0 With knob (with extended shaft) S D T B Shape of terminal B Gull wing ( type only) Blank : Through hole pin (Snap-in terminal pin) Form of packaging T Taping (Gull wing type only) W Blank Code format Real code (Rotor color Yellow) 3 Complementary code (Rotor color Red) 0 Side setting Setting position Please refer to the LIST OF PART NUMBERS when placing orders.

2 SD-00/000 LIST OF PART NUMBERS Binary coded decimal Shape of rotor Form of packaging Real code Complementary code Pieces in package (Through hole pin) Side setting (Through hole pin) (Gull wing) With knob With knob Taping Taping SD-0 SD-0W SD- SD-W SD- SD-W SD-0 SD-0W SD- SD-W SD- SD-W SD-0B SD-0WB SD-0TB SD-B SD-WB SD-TB SD-030 SD-030W SD-30 SD-30W SD-30 SD-30W SD-03 SD-03W SD-3 SD-3W SD-3 SD-3W SD-030B SD-030WB SD-030TB SD-30B SD-30WB SD-30TB 500 pcs./reel 500 pcs./reel Binary coded hexadecimal Shape of rotor Form of packaging Real code Complementary code Pieces in package (Through hole pin) Side setting (Through hole pin) (Gull wing) With knob With knob Taping Taping SD- SD-W SD- SD-W SD- SD-W SD- SD-W SD- SD-W SD- SD-W SD-B SD-WB SD-TB SD-B SD-WB SD-TB SD-30 SD-30W SD-30 SD-30W SD-30 SD-30W SD-3 SD-3W SD-3 SD-3W SD-3 SD-3W SD-30B SD-30WB SD-30TB SD-30B SD-30WB SD-30TB 500 pcs./reel 500 pcs./reel Verify the above part numbers when placing orders. Taping and tray version can be supplied only in reel or tray units.

3 SD-00/000 STANDARD SPECIFICATIONS ELECTRICAL CHARACTERISTICS Circuit type Operating temperature range Storage temperature range BCD (Real code, complementary code) BCH (Real code, complementary code) 0 ~ 85 C Contact rating Non-switching Switching Minimum DC50 V 0 ma DC5 V 0 ma DC0 mv µa Sealing Non washable Contact resistance 0 mω maximum Insulation resistance 00 MΩ (DC0 V) minimum Net weight Without knob 0.65 g With knob 0.76 g Without knob Side setting 0.95 g With knob Side setting.05 g Dielectric strength AC50 V, 60 s MECHANICAL CHARACTERISTICS ENVIRONMENTAL CHARACTERISTICS No. of positions Adjustment torque 6 (SD-00), (SD-000) ~ 5 mn m { ~ 55 gf cm} Vibration Amplitude.5 mm or Acceleration 98 m/s, Hz, 3 directions for h each Stepping angle Terminal strength (Through hole pin only).5 (SD-00), 36 (SD-000) N {.0 kgf} minimum Shock Humidity (Steady state) 90 m/s, ms 6 directions for 3 times each 0 C, Relative humidity 90 ~ 95 %, 0 h Stop strength (With knob only) Solderability N {.0 kgf}, s 5 ± 3 C, ~ 3 s Load life High temperature exposure Low temperature exposure 0000 steps DC5 V, 0 ma 85 C, 96 h 0 C, 96 h Gull wing Reflow : Peak temperature 55 C (Please refer to the profile below.) Manual soldering 350 ± C, 3 ~ s Thermal shock 0 (0.5 h) ~ 85 C ( 0.5 h ), 5 cycles Reflow profile for soldering heat evaluation Temperature ( C) C 50 C +5 0 Peak : 50 C Over 30 C Pre Heating Zone 90 ± 30 s Heating time 30 ± s Soldering Zone Reflow : two times maximum Soldering heat Through hole pin Shear (Gull wing only) Substrate bending (Gull wing only) Pull-off strength (Gull wing only) Flow : 60 ± 3 C as the temperature in a pot of molten solder, immersion from head of terminal to backside of board 5 ~ 6 s, two times maximum Manual soldering 380 ± C, 3 ~ s 5 N {0.5 kgf}, s Width 90 mm, bend 3 mm, 5 s, time 5 N {0.5 kgf}, s { } : Reference only

4 ABCDEF ABCDEF ABCDEF COPAL ELECTRONICS SD-00/000 OUTLINE DIMENSIONS <Through hole pin, > SD- (Real code) SD-30 (Complementary code) Unless otherwise specified, tolerance: ± 0.3 (Unit: mm) SD-0 (Real code) SD-030 (Complementary code) 0.6 W 3. L. D W 3. L. D 3.9 C C SD- (Real code) SD-30 (Complementary code) SD- (Real code) SD-30 (Complementary code) 0.6 W 3. L.5 D W 3. L.5 D 3.9 C C SD- (Real code) SD-30 (Complementary code) SD- (Real code) SD-30 (Complementary code) 0.7 W D W D φ φ 3.9 C C

5 ABCDEF ABCDEF ABCDEF COPAL ELECTRONICS SD-00/000 OUTLINE DIMENSIONS <Through hole pin, Side setting> SD- (Real code) SD-3 (Complementary code) Unless otherwise specified, tolerance: ± 0.3 (Unit: mm) SD-0 (Real code) SD-03 (Complementary code) 0.6 W 3. L. D W 3. L. D 6.8 C 3.3 C 3.3 SD- (Real code) SD-3 (Complementary code) SD- (Real code) SD-3 (Complementary code) 0.6 W 3. L.5 D W 3. L.5 D 6.8 C 3.3 C 3.3 SD- (Real code) SD-3 (Complementary code) SD- (Real code) SD-3 (Complementary code) 0.7 W D W D φ φ 3.9 C 3.3 C 3.3

6 ABCDEF ABCDEF COPAL ELECTRONICS SD-00/000 OUTLINE DIMENSIONS <Gull wing, > SD-B (Real code) SD-30B (Complementary code) Unless otherwise specified, tolerance: ± 0.3 (Unit: mm) SD-0B (Real code) SD-030B (Complementary code) 0.6 W 3. L. D 8 C 0.6 W 3. L. D 8 C 3 3 C C SD-B (Real code) SD-30B (Complementary code) SD-B (Real code) SD-30B (Complementary code) 0.6 W 3. L.5 D 8 C 0.6 W 3. L.5 D 8 C 3 3 C C

7 SD-00/000 CODE FORMAT Code SD-00 series (6 positions) No. of positions SD-000 series ( positions) Position A B C D E F Real code Complementary code Contact closed 8 8 TERMINAL CONNECTION / P.C.B. THROUGH HOLE DIMENSIONS (Unit: mm) Side setting Real code Complementary code Operating face of real code Operating face of complementary code Terminal pin layout (Bottom view) 8 C C 8 C C C 8 C C 8 C ± 0. 6 φ 0.8 hole ± 0. 6 φ 0.8 hole P.C.B. dimensions (Bottom view) ± 0. SD-00/000 case ± 0. SD-00/000 case RECOMMENDED P.C.B. PAD OUTLINE DIMENSIONS ()

8 SD-00/000 PACKAGING SPECIFICATIONS <Taping packaging specifications> Taping version is packaged in 500 pcs. per reel. Orders will be accepted for units of 500 pcs., i.e., 500, 00, 500 pcs., etc. Taping version is boxed with one reel (500 pcs.). Maximum number of consecutive missing pieces= Leader length and reel dimension are shown in the dia-grams below: Embossed tape dimensions Reel dimensions (Unit: mm) (In accordance with EIAJ ET-700A) 5. ± End Empty Filled Empty Head ± 0.5 φ 3 ± 0. φ 330 ± φ 80 ± 0 mm min. 0 pitches min. Direction of feed 00 mm min. Part No. label φ ± ± (Unit: mm) (In accordance with EIAJ RC-09B) +0. φ ± 0. ± 0. ± 0..5 ± ± ± 0. Direction of feed.8 < specifications> Tray version is packaged in 50 pcs. per tray. Orders will be accepted for units of 50 pcs., i. e., 50, 0, 50 pcs. etc. Tray version is boxed with trays. <Bulk pack specifications> The smallest unit of bulk pack in a plastic bag is pcs. per pack. Orders will be accepted for unit of minimum pcs., i.e.,, 0, 30 pcs., etc. Boxing of bulk in a plastic bag is performed with 5 pcs. (standard 50 pcs.) per box.