Fryolux Tinning Compound

Transcription

1 Page /6 SECTION : Identification of the substance/mixture and of the company/undertaking.. Product identifier Product name.3. Details of the supplier of the safety data sheet Company Address The Solder Connection Unit 5 Severn Link Distribution Centre Chepstow Monmouthshire NP6 6UN date 25/0/6 Web Telephone +44 (0) am pm Monday - Thursday am pm Friday sales@solderconnection.co.uk SECTION 2: Hazards identification 2.. Classification of the substance or mixture 2... Classification - 999/45/ЕC Main hazards Classification - EC 272/ Label elements Hazard pictograms C; R34 Xn; R22 N; R50/53 Symbols: C: Corrosive. N: Dangerous for the environment. Harmful if swallowed. Causes burns. Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Acute Tox. 4: H302; Skin Corr. B: H34; STOT SE 3: H335; Aquatic Chronic : H40; Signal Word Hazard Statement Prevention Danger Acute Tox. 4: H302 - Harmful if swallowed. Skin Corr. B: H34 - Causes severe skin burns and eye damage. STOT SE 3: H335 - May cause respiratory irritation. Aquatic Chronic : H40 - Very toxic to aquatic life with long lasting effects. P260 - Do not breathe dust/fume/gas/mist/vapours/spray. P26 - Avoid breathing dust/fume/gas/mist/vapours/spray. P264 - Wash thoroughly after handling. P270 - Do no eat, drink or smoke when using this product. P27 - Use only outdoors or in a well-ventilated area. P273 - Avoid release to the environment. P280 - Wear protective gloves/protective clothing/eye protection/face protection. Tel: +44 (0) sales@solderconnection.co.uk.

2 date Page 2/6 25/0/ Label elements Response Storage Disposal P30+P32 - IF SWALLOWED: Call a POISON CENTER/doctor/ /if you feel unwell. P30+P330+P33 - IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P303+P36+P353 - IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. P304+P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P35+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P30 -Immediately call a POISON CENTER/doctor/. P32 - Call a POISON CENTER/doctor/ /if you feel unwell. P32 - Specific treatment (see on this label). P330 - Rinse mouth. P363 - Wash contaminated clothing before reuse. P39 - Collect spillage. P403+P233 - Store in a well-ventilated place. Keep container tightly closed. P405 - Store locked up. P50 - Dispose of contents/container to SECTION 3: Composition/information on ingredients 3.2. Mixtures 67/548/EEC / 999/45/EC Chemical Name Index No. CAS No. EC No. REACH Registration Conc. Classification Number (%w/w) Tin % M-factor. Zinc chloride (Zinc chloride, fume) % C; R34 Xn; R22 N; R50/53 Ammonium chloride (Ammonium chloride, fume) % Xn; R22 Xi; R36 EC 272/2008 Chemical Name Index No. CAS No. EC No. REACH Registration Conc. Classification Number (%w/w) Tin % M-factor. Zinc chloride (Zinc chloride, fume) % Acute Tox. 4: H302; Skin Corr. B: H34; Aquatic Acute : H400; Aquatic Chronic : H40; Ammonium chloride (Ammonium chloride, fume) % Acute Tox. 4: H302; Eye Irrit. 2: H39; SECTION 4: First aid measures 4.. Description of first aid measures Inhalation Eye contact Skin contact Ingestion Inhalation is irritating to the respiratory tract and may cause damage to the central nervous system. Move the exposed person to fresh air. Seek medical attention if irritation or symptoms persist. Causes burns. Causes severe inflammation and may damage the cornea. Rinse immediately with plenty of water for 5 minutes holding the eyelids open. Seek medical attention if irritation or symptoms persist. Causes burns. Irritating to skin. Wash off immediately with plenty of soap and water. Seek medical attention if irritation or symptoms persist. Harmful if swallowed. If swallowed, seek medical advice immediately and show this container or label. DO NOT INDUCE VOMITING. SECTION 5: Firefighting measures 5.. Extinguishing media 5.2. Special hazards arising from the substance or mixture Use extinguishing media appropriate to the surrounding fire conditions. Tel: +44 (0) sales@solderconnection.co.uk.

3 5.2. Special hazards arising from the substance or mixture Corrosive. Burning produces irritating, toxic and obnoxious fumes Advice for firefighters Wear:. Self-contained breathing apparatus. SECTION 6: Accidental release measures 6.. Personal precautions, protective equipment and emergency procedures date Page 3/6 25/0/ Environmental precautions 6.3. Methods and material for containment and cleaning up SECTION 7: Handling and storage 7.. Precautions for safe handling 7.2. Conditions for safe storage, including any incompatibilities SECTION 8: Exposure controls/personal protection 8.. Control parameters Ensure adequate ventilation of the working area. Wear suitable protective equipment. Avoid raising dust. Do not allow product to enter drains. Prevent further spillage if safe. Avoid raising dust. Clean the area using a vacuum cleaner. Transfer to suitable, labelled containers for disposal. Avoid contact with eyes and skin. Ensure adequate ventilation of the working area. Keep out of the reach of children. Store in correctly labelled containers. Keep in a cool, dry, well ventilated area. Keep containers tightly closed Exposure Limit Values Ammonium chloride (Ammonium chloride, fume) WEL 8-hr limit ppm: - WEL 8-hr limit mg/m3: 0 WEL 5 min limit ppm: - WEL 5 min limit mg/m3: 20 WEL 8-hr limit mg/m3 total - WEL 5 min limit mg/m3 total - WEL 8-hr limit mg/m3 total - WEL 5 min limit mg/m3 total - Tin WEL 8-hr limit ppm: WEL 8-hr limit mg/m3: 0. Zinc chloride (Zinc chloride, fume) 8.2. Exposure controls WEL 5 min limit ppm: WEL 5 min limit mg/m3: 0.2 WEL 8-hr limit mg/m3 total - WEL 5 min limit mg/m3 total - WEL 8-hr limit mg/m3 total - WEL 5 min limit mg/m3 total - WEL 8-hr limit ppm: - WEL 8-hr limit mg/m3: WEL 5 min limit ppm: - WEL 5 min limit mg/m3: 2 WEL 8-hr limit mg/m3 total - WEL 5 min limit mg/m3 total - WEL 8-hr limit mg/m3 total - WEL 5 min limit mg/m3 total Appropriate engineering controls Individual protection measures Ensure adequate ventilation of the working area. Wear chemical protective clothing. Wash all contaminated clothing before reuse. Tel: +44 (0) sales@solderconnection.co.uk.

4 Page 4/6 date 25/0/ Exposure controls Eye / face protection Skin protection - Handprotection Respiratory protection Approved safety goggles. Chemical resistant gloves (PVC). Wear:. Self-contained breathing apparatus. SECTION 9: Physical and chemical properties 9.. Information on basic physical and chemical properties Appearance Powder Colour Grey Odour Ammoniacal Water solubility Soluble in water. SECTION 0: Stability and reactivity 0.2. Chemical stability Hygroscopic. Stable under normal conditions. SECTION : Toxicological information.. Information on toxicological effects Skin corrosion/irritation..4. Toxicological Information Corrosive. Causes burns. Toxic by inhalation and if swallowed. SECTION 2: Ecological information 2.. Toxicity Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. SECTION 3: Disposal considerations General information Contact a licensed waste disposal company. Disposal methods Disposal of packaging Contact a licensed waste disposal company. For disposal within the EC, the appropriate code according to the European Waste Catalogue (EWC) should be used. Do NOT reuse empty containers. Empty containers can be sent for disposal or recycling. SECTION 4: Transport information Hazard pictograms 4.. UN number 4.2. UN proper shipping name UN233 ZINC CHLORIDE, ANHYDROUS Tel: +44 (0) sales@solderconnection.co.uk.

5 Page 5/ Transport hazard class(es) ADR/RID 8 Subsidiary risk - IMDG 8 Subsidiary risk - IATA 8 Subsidiary risk Packing group Packing group 4.5. Environmental hazards Environmental hazards Marine pollutant ADR/RID III Yes Yes Hazard ID 80 Tunnel Category IMDG EmS Code IATA (E) Packing Instruction (Cargo) 864 Maximum quantity Packing Instruction (Passenger) Maximum quantity F-A S-B 00 kg kg SECTION 5: Regulatory information date 25/0/206 SECTION 6: Other information Other information Text of risk phrases in Section 3 Text of Hazard Statements in Section 3 This document differs from the previous version in the following areas: Information on basic physical and chemical properties (Initial boiling point) Information on basic physical and chemical properties (Melting point) Information on basic physical and chemical properties (Vapour pressure) Information on basic physical and chemical properties (Relative density) Information on basic physical and chemical properties (Vapour density) Information on basic physical and chemical properties (Evaporation rate) Information on basic physical and chemical properties (Freezing Point) Information on basic physical and chemical properties (Odour threshold) Other information (Gas group) R22 - Harmful if swallowed. R34 - Causes burns. R36 - Irritating to eyes. R50/53 - Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Acute Tox. 4: H302 - Harmful if swallowed. Skin Corr. B: H34 - Causes severe skin burns and eye damage. Aquatic Chronic : H40 - Very toxic to aquatic life with long lasting effects. Eye Irrit. 2: H39 - Causes serious eye irritation. Tel: +44 (0) sales@solderconnection.co.uk.

6 Page 6/6 Further information date 25/0/206 The information supplied in this Safety Data Sheet is designed only as guidance for the safe use, storage and handling of the product. This information is correct to the best of our knowledge and belief at the date of publication however no guarantee is made to its accuracy. This information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any other process. Tel: +44 (0)