Direct Composite Veneering System for Cervical Fillings
The unique way of restoring tooth necks. The first composite shell for tooth necks. Benefits for the dentist: VENI. The most innovative way of restoring tooth necks. Experience has shown that defects of the tooth neck can often only be restored insufficiently using the classical methods. COMPONEER CLASS V, the first composite veneering technique for the successful restoration of tooth necks, represents a new and innovative solution. The specially treated nano-hybrid composite tooth neck veneers allow easy and safe restoration of defects. Easier and safer application of composite to the tooth surface Optimal wetting of the surface Improved marginal adaptation Optimised shrinking Improved surface of the filling Amazing blending ability in the cervical region at the margin (Duo Shade System with SYNERGY D6) VIDI. The first composite shells for tooth necks is based on the successful Direct Composite Veneering System COMPONEER for the restoration of anterior teeth which also uses composite shells. The new tooth neck shells have a special positioning guide which enables controlled and reliable application. The evenly applied pressure created when placing the tooth neck shell improves wetting between tooth and composite. This renders good marginal adaptation to minimise accumulation of plaque, discoloration and secondary caries. Four shapes and five shades are available to ensure efficient working. Excellent polishability Improved abrasion resistance Less discoloration at the edges Good reasons for the patient: Reduced filling loss Less discoloration at the edges Lower risk of secondary caries Long-lasting and improved aesthetics Bonding values : VICI. For fast and reliable restoration of tooth necks The combination of material-technical properties and sophisticated application technology leads to a high quality outcome. The COMPONEER CLASS V tooth neck shells possess exceptional material quality with a homogeneous surface and without porosities. As the COMPONEER CLASS V shell acts as filling cover, shrinking at the margin is optimised. The excellent colour adaptation of the SYNERGY D6 Duo Shade System and its easy and fast application result in a long-lasting and aesthetic restoration of tooth necks. Bonding strength / MPa 30 25 20 15 0 One Coat Self-Etching Bond on COMPONEER CLASS V One Coat Self-Etching Bond on dentine Source: internal documents One Coat Self-Etching Bond on enamel (etched)
Fast and reliable restoration of tooth necks The positioning guide widens in steps on the labial area of the. This geometry creates a predetermined breaking point and prevents the shell from being damaged when snapping off the positioning guide. Shows after snapping off the positioning guide. It can be seen clearly that the break occurs above the labial area. The positioning guide can be removed easily with a polishing disk. Then the surface is polished to give long-lasting gloss. Small (S) Large (L) Small/Long (S/L) Large/Long (L/L) One Coat Self-Etching Bond and. An unbeatable connection. One Coat Self-Etching Bond ensures optimal bonding between tooth substance and. Bonding is increased through the special micro-retentive inner surface. This ensures a long-lasting restoration. Micro-retentive inner surface of with a 2 µm structure for sustainable bonding.
Innovative. Well thought-out. Effective. 1 Preparation Conditioning Primer Bonding Light polymerisation 2 Bond to Composite on tooth Composite on 3 4 Apply with pressure Position Remove excess cement Light polymerisation Remove positioning guide Define edges Polish edges and surface Technical data Compressive strength 392 MPa Smallest particle size 20 nm ø particle size filler 0.6 µm Filler content by weight 80 % Filler content by volume 65 % Density 2.0 g/cm3 Flexural modulus 9000 MPa Flexural strength 127 MPa Water absorption 16 µg/mm3 Solubility in water 0.9 µg/mm3 Radio-opaqueness 2 mm Al Vickers hardness 73 kg/mm2 Enamel Dentine Etched and bonded enamel, beyond the edges of the preparation Enamel taper Levelled restoration Chemical bond between composite and SYNERGY D6 Composite Conditioned and bonded dentine Finished restoration edge reduced to zero
Successful restoration of tooth necks with style. COMPONEER CLASS V Kits COMPONEER CLASS V PREMIUM Kit COMPONEER CLASS V REFILLS 6001 8056 COMPONEER CLASS V REFILL PACKS 40, 4 Veneers A1/B1 S 6001 8009 Each 2 pcs./size: S, S/L, L, L/L, 4 Veneers A2/B2 S 6001 8010 Shades: Dentine: A1/B1, A2/B2, A3/D3, A4/C4 Enamel: Universal, 4 Veneers A3/D3 S 6001 8011, 4 Veneers A4/C4 S 6001 8012, 4 Veneers UNIV. S 6001 8013, 4 Veneers A1/B1 S/L 6001 8015, 4 Veneers A2/B2 S/L 6001 8016, 4 Veneers A3/D3 S/L 6001 8017, 4 Veneers A4/C4 S/L 6001 8018, 4 Veneers UNIV. S/L 6001 8019, 4 Veneers A1/B1 L 6001 8020, 4 Veneers A2/B2 L 6001 8021 20, 4 Veneers A3/D3 L 6001 8022 Each 5 pcs. size S + L in shades: Dentine: A2/B2, A3/D3, 4 Veneers A4/C4 L 6001 8023, 4 Veneers UNIV. L 6001 8024, 4 Veneers A1/B1 L/L 6001 8025, 4 Veneers A2/B2 L/L 6001 8026, 4 Veneers A3/D3 L/L 6001 8027, 4 Veneers A4/C4 L/L 6001 8028, 4 Veneers UNIV. L/L 6001 8029 5 ml One Coat Self-Etching Bond, Primer 1 5 ml One Coat Self-Etching Bond, Bond 2 50 Brushes yellow 50 Brushes black 1 Mixing well Shade Guide Contour Guides S, S/L, L, L/L COMPONEER CLASS V INTRO Kit 5 ml One Coat Self-Etching Bond, Primer 1 5 ml One Coat Self-Etching Bond, Bond 2 50 Brushes yellow 50 Brushes black 1 Mixing well Shade Guide 6001 8040 Contour Guides S, S/L, L, L/L INSTRUMENTS / ACCESSORIES Contour Guide Set each 1 pc. S, S/L, L, L/L 6001 8422 Shade Guide 6001 8250 Etchant Gel S, 2.5 ml 7373 5 ml One Coat Self-Etching Bond, Primer 1, Refill 7635 5 ml One Coat Self-Etching Bond, Bond 2, Refill 7636 Brushes yellow, 50 pcs. 7633 Brushes black, 50 pcs. 7634 COMPONEER CLASS V Kits All items required for tooth neck restoration with, are contained in the compact Kits.
The COMPONEER Family Well thought-out down to the finest detail. COMPONEER Direct Composite Veneering System for the restoration of anterior teeth Rely on COMPONEER and COMPONEER CLASS V by COLTENE. For more comprehensive advice or if you would like to place an order contact our Customer Service Team at any time. Visit us at: www.componeer.info 6001 8448 05.14 2014 Coltène/Whaledent AG www.coltene.com Coltène/Whaledent AG Feldwiesenstr. 20 9450 Altstätten/Switzerland Tel. + 41 71 757 53 00 Fax + 41 71 757 53 01 info.ch@coltene.com Coltène/Whaledent Inc. 235 Ascot Parkway Cuyahoga Falls, Ohio 44223/USA Tel. + 1 330 916 8800 Fax + 1 330 916 7077 info.us@coltene.com Coltène/Whaledent Ltd. The President Suite Kendal House, Victoria Way Burgess Hill, West Sussex RH15 9NF / UK Tel +44 1444 235486 Fax +44 1444 870640 info.uk@coltene.com