- RESTORATIVE PRODUCT CATALOG MADE IN USA Others make Implants to sell... Tatum Surgical makes Implants to treat your Patients.
Your Source for Implants To Meet Every Clinical Need Tatum... 4 Angled Post Abutments... 5 Straight Post Abutments... 5 Inegrity One-Piece Post Abutments... 5 Abutment Screws... 5 Titanium Temporary Abutments... 5 Ball Post Abutments... 5 Titanium Bases... 6 Intergrity Bio-Torque Drivers... 6 Healing Caps... 6 Implant Cover Screws... 6 Zest Locators... 6 Healing Cap... 7 Platform Switch Abutment... 7 Transfer Analogs... 7 Implant Scan Body... 7 Analogs... 7 Engaging and Non-Engaging UCLAs... 7 Tatum Traditional Unipost Abutments and Components... 8 Tatum Traditional Push-In Abutments... 8 Resiment Ready Mix Cement... 8 EZ-Prep Kit... 8 Tatum Traditional Unipost Abutment Dimensions... 9 Tatum Traditional Healing Cuffs... 10 O Ball Attachments and Components...11 Zest Locators... 12 UCLAs and Components... 14 Advantages of Tatum Implant Systems: Only one surgical procedure is required to place and load the Tatum Surgical implant because the implants are designed to be left exposed at the crest of the soft tissue. Angled abutments are available in multiple angles thereby making them absolutely parallel to each other so that a passive fit of the casting can be achieved. The system has straight and angled post guides that correspond to various abutments. As a result, on the day of the surgery, immediately following implant placement, before placing healing screw, abutment guides are used to select appropriate abutments for future use. The practitioner will have 4-6 months to order the selected abutments. This eliminates the need for large inventory of abutments thereby reducing initial investment substantially and making this system most economical. The system has hand instruments which can be combined with the drills so that in an event of power failure or equipment failure (handpiece, physiodispensor, motor, irrigation device, etc. ) the clinician can still complete the Osteotomy procedure and successfully place the implant. The Unipost Implant System has three different designs of implants. The Screw and Tapered type implants are available in 7 different diameters and four different lengths. The D-Fin implant is available in 4 different diameters and 2 different lengths. These three designs of implants with wide ranges of sizes allow management of several different clinical situations depending upon available bone. The system has osteotomes which allows placement of implants in thin bone in the maxilla without the use of any drills, handpiece, and physiodispensor. The entire maxillary arch can be treated with the use of simple osteotomes. Tatum Surgical carries straight, offset, and tapered osteotomes. Implants are manufactured by engineers who with very sound bio-mechanical principles routinely manufacture titanium devices for NASA of NASA standards. Unipost implants are very economical as compared to most of the other implant systems. Current prices are $110 for all available implants. The system is designed to utilize bone expansion concept which provides very good esthetic results in anterior maxilla. The drills are designed for internal irrigation for better osteotomy preparation. The abutments are designed in a way to allow the clinician to screw them as well as cement them thereby providing stability to the final prosthesis. The same abutments fit all three designs of implants. Hence the name Unipost Implant System is quite justified and most appropriate. It is by far the simplest system to use. All fixed prostheses are cemented. Once abutments are placed, the remaining procedure is routine crown and bridge dentistry. The abutments have a smooth surface collar which can be prepared and included in the prosthesis thereby making the implant, the abutment, and the crown a single unit, which physiologically mimics a natural tooth. Surgically and prosthetically, it is a much simpler system to use as compared to most other implant systems. Usually, other implant systems require two surgical procedures and complicated prosthetic procedures using several unnecessary parts like analogs, transfer copings, etc. This adds extraneous steps, laboratory time, and expense, thus increasing a greater chance for error.
Designed for Simplicity, Engineered for Strength. Our unique tapered design is anatomically correct, enabling easier implant placement, while providing enhanced primary stability. Angled Post Abutments 3.7 mm through 8 mm and angles 0 ~15 8.0 mm x 15 Designed to be a single surgery implant, that preserves both crestal bone, and soft tissue. 7.0 mm x 15 Simple abutment placement due to the soft tissue level connection. Internal pentagon offers 5 secure, and positive abutment positions. HT 30 Thumb Drive Strong, stable, and retrievable abutment design utilizing large retention screws (2.0mm and 2.5mm). 3.7~4.5 mm x 15 Straight Post Abutments Internal tapered abutment connection to reduce the abutment/screw load. A lab Friendly system throughout the world. Retention Screw Tatum Implants Internal Pentagon feature offers 5 secure, and positive abutment positions. 5.0 mm x 15 x 15 3.7~8.0 mm Abutment Blank Abutment Screws One-Piece Post Abutments Fully Assembled Tapered Implant Post Abutment 2 mm 2.5 mm Titanium Temporary Abutment Tapered Implant 4 Implant System - Post Abutments Ball Post Abutments 1 mm Cuff 3.7 ~ 3 mm Cuff 3.7 ~ Ball Post Abutment Housing 5 mm Cuff 3.7 ~ 5
Titanium Bases Bio-Torque Drivers Delrin Healing Cap Platform Switch Abutment Angles 0, 15 and 30 Healing Cap.050 in. Short Transfer Analogs.050 in. Long Healing Caps 3.7 mm 4.0 mm 4.5 mm 5.0 mm Implant Cover Screws 3.7~4.5 mm 5.0 mm 7.0 mm 8.0 mm 7.0 mm 8.0 mm 3.7~8.0 mm Engaging and Non-Engaging UCLAs Analogs Zest Locators 3.7 mm 2 mm Cuff 3 mm Cuff Implant Scan Body 3.7~8.0 mm Transfer 1 mm Cuff 6 4 mm Cuff 4.0 mm 4.5 mm 7.0 mm 5.0 mm 8.0 mm UCLA 3.7~8.0 mm Implant System - UCLAs, Transfer Analogs, Analogs, Healing Cap, Platform Switches and Scan Bodies Implant System - Titanium Abutments, Healing Caps, Cover Screws, Zest Locators and Drivers 7
Tatum Traditional Unipost System Abutments and Components Traditional Unipost Abutments 0º Threaded post 10º Threaded post 20º Threaded post Push-In Post Abutments : 3.5 mm through 8.0 mm Angles 0-15 -30 30º Threaded post Traditional Unipost Abutment Dimensions Post Post Post Catalog # Diameter Angle Height PN 30.00 3.0 mm 0 9 mm PN 30.00S 3.0 mm 0 5 mm PN 30.10S 3.0 mm 10 5 mm PN 30.20S 3.0 mm 20 5 mm PN 35.00 3.5 mm 0 9 mm PN 35.10 3.5 mm 10 9 mm PN 35.20 3.5 mm 20 9 mm PN 35.30 3.5 mm 30 9 mm PN 35.00S 3.5 mm 0 5 mm PN 35.10S 3.5 mm 10 5 mm PN 35.20S 3.5 mm 20 5 mm PN 35.30S 3.5 mm 30 5 mm PN 40.00 4.0 mm 0 9 mm PN 40.10 4.0 mm 10 9 mm PN 40.20 4.0 mm 20 9 mm PN 40.30 4.0 mm 30 9 mm PN 40.00S 4.0 mm 0 5 mm PN 40.10S 4.0 mm 10 5 mm PN 40.20S 4.0 mm 20 5 mm PN 40.30S 4.0 mm 30 5 mm PN 45.00 4.5 mm 0 9 mm PN 45.10 4.5 mm 10 9 mm PN 45.20 4.5 mm 20 9 mm PN 45.30 4.5 mm 30 9 mm PN 45.00S 4.5 mm 0 5 mm PN 45.10S 4.5 mm 10 5 mm PN 45.20S 4.5 mm 20 5 mm PN 45.30S 4.5 mm 30 5 mm Tatum Traditional Unipost Abutment Dimensions PN 4.0 mm x 0 PN 4.0 mm x 10 PN 4.0 mm x 30 Resiment Ready-Mix A filled Composite Resin Cement PN 50.00 5.0 mm 0 9 mm PN 50.10 5.0 mm 10 9 mm PN 50.20 5.0 mm 20 9 mm PN 50.30 5.0 mm 30 9 mm PN 50.00S 5.0 mm 0 5 mm PN 50.10S 5.0 mm 10 5 mm PN 50.20S 5.0 mm 20 5 mm PN 50.30S 5.0 mm 30 5 mm EZ-Prep Kit (Sold Seperately) Designed to aid in placing Tatum Unipost Implants. Hole No. Product Reorder No. 3 GW 2 15062 6 GW Ultra 856-016 18198-5 7 GW Ultra 856-016 18198-5 9 GW Ultra 856-018 18188-5 10 GW Ultra 856-018 18188-5 11 Piranha 856-018F Same No. 13 Piranha 859-016F Same No. 15 Piranha 878-016F Same No. PN 60.00 0 9 mm PN 60.10 10 9 mm PN 60.20 20 9 mm PN 60.30 30 9 mm PN 60.00S 0 5 mm PN 60.10S 10 5 mm PN 60.20S 20 5 mm PN 60.30S 30 5 mm PN 70.00S 7.0 mm 0 5 mm PN CM custom made post by request >30 8 9
Tatum Traditional Healing Cuffs Healing Cuffs 3.5 mm 4.0 mm 4.5 mm HT 11 Driver O Ball Attachments and Components O-Ring Insertion Tool Tatum Traditional O Ball Attachments and Components Healing Cuff on Implant O Ball Abutments and Housing (new with hex) 5.0 mm (Also available in 7.0 mm and 8.0 mm) O Ball Plastic Analogs (large and small) 10 11
Zest Locators Zest Anchors Name Description Catalog # ZL Angle Guide Angle Measuring Guide #9530 ZL Alignment Pin Alignment Pin for Angle Guide (2 Pk) #9531 ZL Locator Par. Post Locator Parallel Post (4 Pk) #8517 ZL Locator Cast To Bar Locator Cast/Bar Anchors (2 Pk) #8536 ZL FA4mm Analog Locator Female Analog (4 Pk) #8530 ZL Core Tool Locator Core Tool #8393 ZL Impression Coping Impression Coping (4 Pk) #8505 ZL Male Processing Pk. Male Processing Pack (2 Pk) #08519-2 ZL Male Processing Pk. Male Processing Pack (10 Pk) #08519-10 ZL Torque Wrench Kit Locator Torque and Thumb Knob Wrench Kit #4391 3.5 x 0mm 3.5 x 0mm 3.5 x 1mm 3.5 x 2mm Zest Locators ZLA3.5X0.00mm Locator Abutment 3.5x00mm #08100 ZLA3.5X1.00mm Locator Abutment 3.5x1.0mm #08101 ZLA3.5X2.00mm Locator Abutment 3.5x2.0mm #08102 ZLA3.5X3.00mm Locator Abutment 3.5x3.0mm #08103 ZLA3.5X4.00mm Locator Abutment 3.5x4.0mm #08104 ZLA4.0X0.25mm Locator Abutment 4.0x.25mm #08110 ZLA4.0X1.00mm Locator Abutment 4.0x1.0mm #08111 ZLA4.0X2.00mm Locator Abutment 4.0x2.0mm #08112 ZLA4.0X3.00mm Locator Abutment 4.0x3.0mm #08113 ZLA4.0X4.00mm Locator Abutment 4.0x4.0mm #08114 ZLA4.5X0.50mm Locator Abutment 4.5x.50mm #08120 ZLA4.5X1.00mm Locator Abutment 4.5x1.0mm #08121 ZLA4.5X2.00mm Locator Abutment 4.5x2.0mm #08122 ZLA4.5X3.00mm Locator Abutment 4.5x3.0mm #08123 ZLA4.5X4.00mm Locator Abutment 4.5x4.0mm #08124 3.5 x 3mm 3.5 x 4mm ZL Male Clear (5.0 lb. Retention) Locator Male Regular Retention (4 Pk) #8524 Zest Ratchet Driver ZL Male Pink (3.0 lb. Retention) Locator Male Light Retention (4 Pk) #8527 ZL Male Blue (1.5 lb. Retention) Locator Male Extra Light Retention (4 Pk) #8529 Zest Ratchet Driver ZL Male Green (4.0 lb. Range) Locator Male Extended Range (4 Pk) #8547 Locator Core Tool ZL Male Red (1.0 lb. Range) Locator Male Extended Range, Extra Light Retention (4 Pk) #8548 Zest Chairside Kit Zest Chairside Processing Kit #09566 12 13
3.5 mm Denture Model with Implants 4.0 mm 4.5 mm Denture Model with Transfer Analogs 5.0 mm Tatum Traditional UCLAs and Components Tatum Traditional UCLAs and Components Implant Analogs Transfer Analog Denture Model with UCLAs.050 Hex Driver 2.5 mm Retention Screw Temporary Abutment Bio-Torq 1.25mm Driver with Wrench 4mm UCLA C & B Analogs 3.0 mm through 8.0 mm 14 Tatum Implant Analog 15
FDA Marketing Approval 1981 ISO 13485:2012 ISO 9001:2008 MDD 93/42/EEC FDA CFR Part 820 and CFR 803 35 Tatum Surgical A division of Suncoast Dental, Inc. 4500 140Th Avenue North Suite 112 Clearwater, FL 33762 www.tatumsurgical.com Tel: 727-536-4880 Fax: 727-531-6005 Toll Free Number 1-888-360-5550 Email: TatumImplants@verizon.net