Manufacturer and distributor of the human bone models for workshop or demonstration of the dental implants and orthopedic fixation. We offer the option to provide you with custom made models of bones that meet the individual needs of the customer. More details could be found at www.promedicus.co.uk ABOUT US The aim of our company is to produce the anatomic models of bone which imitate human bones. Our products are designed for training purposes in orthopedic surgery and implant dentistry. The products we offer have the same shape and mechanical properties as natural human bone due to the specially designed technology and the chemical composition. On x-rays and CT scans the product has also similar appearance and consistency to natural bone. We offer bone models for presentations and training in orthopedy: spine shoulder bones of arm and hand pelvis bone tibia bones femur knee foot Our offer for implant dentistry: maxillas mandibles mandible and maxilla with mucosa and without it transparent models models for phantoms holders Used composite materials with different structure and hardness perfectly imitate the double-layer structure of natural bone. Our model material behaves similar to natural bone during drilling and cutting. An additional feature of our model is a characteristic CT picture with perfect reproducing of human bones. In addition to standard products presented in our offer we would be pleased to provide you with custom made models of bones to suit your individual needs. Page 1
ORTHOPAEDIC IMPLANTOLOGY Below is our offer of composite bones for training of orthopedic implants. Description of material version Plastic cortical shell. The plastic cortical shell models are made of a rigid plastic shell with cancellous material in the proximal and distal ends. The bone includes the intramedullary canal 4 to 12 mm diameter, materials version A. The model is mainly used for presentation purposes Foam cortical shell. The foam cortical shell models are made of a rigid foam shell with cancellous material in the distal and proximal ends. Also include the intramedullary canal 4 to 12 mm diameter. These models could be cut and drilled easier then the plastic cortical shell models and are most commonly used for total joint replacement, internal fixation and any other orthopedic procedure where a medium cost bone is desired, materials version B. Solid foam. The solid foam bone models are made of a rigid foam throughout. The bones include the intramedullary canal 4 to 12 mm diameter. The product is most commonly used for external fixation and some limited total joint replacement and internal fixations. It is economical bone for most applications, material version C. Spine cervical section from C1 to C7, overall length 115 mm, made of solid foam (materials version C) with soft flexible disks. The low density version of model can also be supplied. Catalog number 90-1000C --------------------------------------------------------------------------------------------------------------------------- Spine cervical section from C1 to C7 on pieces, made of solid foam (materials version C). In piece to sale separately. The low density version of model can also be supplied. Catalog number 90-1010C Page 2
Scapula left with additional fitting block, material version C. Catalog number 70-1000C Humerus, right, overall length 345 mm, material version A with inner canal diameter 10 mm. Catalog number 50-1000A Humerus, right, overall length 345 mm, material version B with inner canal diameter 10 mm. Catalog number 50-1000B Humerus, right, overall length 345 mm, material version C with inner canal diameter 10 mm. Catalog number 50-1000C Humerus left, overall length 364 mm with inner canal diameter 4 mm, shaft diameter 50 mm, material version A. Catalog number 50-2000A Humerus left, overall length 364 mm with inner canal diameter 4 mm, shaft diameter 50 mm, material version B. Catalog number 50-2000B Humerus left, overall length 364 mm with inner canal diameter 4 mm, shaft diameter 50 mm, material version C. Catalog number 50-2000C Humerus with no canal, right, overall length 345 mm, material version B. Catalog number 50-1900B Humerus with no canal, right, overall length 345 mm, material version C. Catalog number 50-1900C Page 3
Radius and Ulma, left, length of radius 250 mm, length of Ulma 275 mm, made of solid foam with no canal (material version C). Catalog number 80-1000A Ulna left, length 275 mm, made of solid foam with no canal (material version C). Catalog number 80-1100C Radius left, length of radius 250 mm, made of solid foam with no canal (material version C). Catalog number 80-1200C Hand left, made of solid foam with materials version C, simplified with all bones produced as one piece (non-flexible joints). Overall length: 210 mm. Catalog number 80-1010C Right Hemi-Pelvis with acetabular diameter 49 mm. Model prepared as dense cancellous bone made of material version C. Catalog number 60-1000C Page 4
Femur, left, overall length 450 mm, head diameter 45 mm, material version A Catalog number 30-1000A Femur, left, overall length 450 mm, head diameter 45 mm, material version B Catalog number 30-1000B Femur, left, overall length 450 mm, head diameter 45 mm, material version C Catalog number 30-1000C --------------------------------------------------------------------------------------------------------------------------- Femur right, overall length 495 mm, head diameter 50 mm, material version A Catalog number 30-2000A Femur right, overall length 495 mm, head diameter 50 mm, material version B Catalog number 30-2000B Femur right, overall length 495 mm, head diameter 50 mm, material version C Catalog number 30-2000C Femur with no canal, left, overall length 450 mm, head diameter 45 mm, material version B. Catalog number 30-1900B Femur with no canal, left, overall length 450 mm, head diameter 45 mm, material version C. Catalog number 30-1900C Knee Joint large, left, overall length 805 mm, material version A, with inner canal 12 mm, Catalog number 40-1000A Knee Joint large, left, overall length 805 mm, material version B, with inner canal 12 mm, Catalog number 40-1000B Knee Joint large, left, overall length 805 mm, material version C, with inner canal 12 mm, Catalog number 40-1000C Page 5
Knee Joint medium, left, overall length 500 mm, material version A, with inner canal 12 mm, Catalog number 40-1010A Knee Joint medium, left, overall length 500 mm, material version B, with inner canal 12 mm, Catalog number 40-1010B Knee Joint medium, left, overall length 500 mm, material version C, with inner canal 12 mm, Catalog number 40-1010C Tibia, left, overall length 405 mm, material version A Catalog number 20-1000A Tibia, left, overall length 405 mm, material version B Catalog number 20-1000B Tibia, left, overall length 405 mm, material version C Catalog number 20-1000C Tibia, left, overall length 380 mm, material version A Catalog number 20-2000C Tibia, left, overall length 380 mm, material version B Catalog number 20-2000B Tibia, left, overall length 380 mm, material version C Catalog number 20-2000C Tibia with no canal, left, overall length 405 mm, material version B. Catalog number 20-1900B Tibia with no canal, left, overall length 405 mm, material version C. Catalog number 20-1900C Page 6
Tibia right, overall length 380 mm, material version C Catalog number 20-2001C Fibula right, length 380 mm, materials version C. Catalog number 20-1011C Right Foot, overall length 259 mm, consisting of four parts: Talus, Calcaneus, lateral and medial forefoot section with ligaments. Materials version C. Catalog number 20-1521C POLAND 43-190 Mikołów ul. Brzoskwiniowa 11 Catalog phone: +48 number 32 22 40-1020B 62 530 phone/fax: +48 32 73 82 642 Page 7 Knee stand demo left. Fully functional left knee with ligaments on a table stand. Materials version B with dense cortical and soft cancellous bone. Condylar width: 76 mm, overall length: 325 mm, size of table 110 mm x 110 mm. These models could be also custom designed to display customer product. Please contact us with the details of your implant special requirements and we can prepare options and pricing information.
Demo Hip right stand. Fully functional. Femur made of materials version B with dense cortical and soft cancellous bone and Pelvis made of solid foam materials version C. Overall height: 285 mm, width: 200 mm, acetabular diameter: 49 mm, size of table: 110 mm x 110 mm. These models could be also custom designed to display customer product. Please contact us with the details of your implant special requirements. We can prepare the best options and pricing information. Catalog number 40-1031B Partial Skull, right side with holding block, produced of materials version C. Catalog number 00-1001 Page 8
The general sales conditions The prices quoted are ex-works export price (VAT exclusive) for one piece, packing included. Prices do not include shipping costs. From the time of dispatch of the goods the risk of any loss or damage to the goods shall be borne by the buyer. If requested shipping could be organized by the company of your preference. All bank charges have to be paid by the buyer. Terms of payment: prepayment by: bank transfer to: ING Bank Śląski, Oddział Mikołów, Karola Miarki 20, 43-190 Mikołów, Poland IBAN: PL 64 1050 1634 1000 0090 6236 1846 SWIFT: INGBPLPW credit card (PayPal) will attract additional 2% charge. If the goods have arrived damaged please notify carrier and our sale service immediately. If the product arrives in an unsatisfactory condition please contact our sale service within 7 days after delivery. Returns not agreed in advance will not be accepted and will be sent back at the risk and expense of the buyer. In case of agreed returns 10% of the handling charge is invoiced. The offer is valid until the next prices change. Time of delivery needs to be discussed on individual basis (please note though that most of the product we have on stock, available for immediate purchase). We are pleased to offer also different versions of the Mandible and Maxilla that could be used for dental implants workshop (see DENTAL LINE products). Mikołów, 2 nd December 2012 Page 9