1
RINGING 3 EES OF EXELLENE & PREISION INTO OUR /M PROUTS N IGITL LIRRIES. lpha-io Tec introduces a comprehensive range of /M restoration products for Internal Hex and onical s. ll products feature original lpha-bio Tec connections with the exact tolerances, ensuring best reliable implant to restoration fit, and offer solutions for single tooth and bridge restorations. Internal Hex onnection SUPPORTE IMPLNTS: NeO, SPI, IE, FI, TI ual Use Scan ody S-IH 5019 Standard abutment screw included. Use standard driver - 4052 ual Use Scan odies (for lab and/or intra-oral use) Unique geometry for precise transfer of implant position, trajectory and orientation to the system. Peek body and titanium base for accurate, long lasting use. The scan bodies are biocompatible and autoclavable. Ti ases Non Engaged (bridges/bars) Engaged (single tooth) Ti ases - Wide Non Engaged (bridges/bars) Titanium ases Used as abutment bases for digital restorations with lpha-io Tec original implant connection. Parts available in a range of gingival heights. dhesive opings dhesive copings are used as adapters for screw retained zirconium restorations at abutment level - multi-unit angled and straight abutments (TT-N connection). Zirconia restorations may not withstand the screw forces, thus for cases where there is no plan for a metal frame, the adhesive coping is indicated. direct mounting screw is available for restorations without adhesive copings. Pre-milled lanks re used as raw material for M fabrication of a single part (monolithic) titanium abutment. Original pre-milled implant connection is fabricated with the exact tolerances, ensuring best reliable implant to restoration fit. Fits Medentika s Preface abutment holder. Gingival Height 0.7 mm 2.5 mm 0.7 mm 2.5 mm 0.7 mm 0.7 mm : Ø4.5 mm : 5 mm : 5.7 mm : 0.6 mm : Ø4.5 mm :4 mm : 6.5 mm : 0.6 mm :Ø4.5 mm : 5 mm : 5.7 mm : 0.7 mm : Ø4.5 mm :4 mm : 6.5 mm : 0.7 mm :Ø6 mm : 3.5 mm : 4.2 mm : 1.2 mm :Ø6 mm : 3.5 mm : 4.2 mm : 1.43 mm ode T T-2.5 T-R T-R-2.5 WT WT-R Ref. No. 5024 4951 5025 4952 5007 5008 * Standard abutment screw included. /M Libraries Software libraries contain all relevant ad/am parts - Scan odies, Ti-ases, dhesive opings, Screws, nalogs and Pre-Milled lanks. lpha-io Tec. Libraries enable simple and easy designing and manufacturing of your restorations for support all lpha-io Tec. implant s. ll products are available and supported by leading /M systems. Please refer to lpha-bio Tec website to download our libraries. Ti ase - ngled ual use scan-bodies dhesive copings : Ø4.5 mm : 5 mm : 5.5 mm : 0.6 mm : Ø11.5 mm : 20.2 mm : Ø15.8 mm : 20.25 mm : 15.25 mm : Ø11.5 mm H ode T ode -PF-IH ode W-PF-IH IH Ref. No. 5005 Ref. No. 4988 Ref. No. 4989 For PreFace abutment holder Titanium bases * Standard abutment screw included. Screws nalogs ll products are available and supported by leading /M system libraries including: ode STLS STLT I N-PM Ref. No. 5122 5121 5080 4995 ental Wings, manngirrbach, 3shape, exocad and egs are trademarks or registered trademarks of their respective owners: ental Wings LLc., mann Gribbach G, 3Shape /S, exocad GmbH. lpha-io Tec is neither endorsed, nor sponsored, nor affiliated with the owners of these trademarks or registered trademarks. Standard abutment screw For lab use (optional) For printed models 2 3
onical Hex onnection SUPPORTE IMPLNTS: NeO (ø3.5, ø3.2), NIE ual Use Scan ody S-H 5021 For lab use and intra-oral. H abutment screw included onical Standard onnection SUPPORTE IMPLNTS: NeO (ø3.75, ø4.2, ø5.0) ual Use Scan ody IOS-S 3837 S abutment screw included. Use standard driver - 4052 Ti ases Ti ases - Engaged (Single tooth) Non Engaged (bridges/bars) Gingival Height 0.7 mm 2.5 mm 0.7 mm 2.5 mm Gingival Height 0.75 mm 1.5 mm 2.5 mm : Ø3.8 mm : 5 mm : 5.7 mm : 0.4 mm : Ø3.8 mm : 4 mm :6.5 mm : 0.42 mm :Ø3.6 mm : 5 mm : 5.7 mm : 0.5 mm : Ø3.8 mm : 4 mm : 6.5mm : 0.5 mm : Ø4.7 mm : 4 mm : 4.87 mm : 0.5 mm : Ø4.7 mm : 4 mm : 5.62 mm : 0.53 mm : Ø4.7 mm : 4 mm : 6.62 mm : 0.5 mm ode T-H T-H-2.5 T-H-R T-H-R-2.5 Ref. No. 5026 4953 5027 4954 * H abutment screw included. ode T_0.75_R_S T_1.5_R_S T_2.5_R_S Ref. No. 3832 3840 3842 * S abutment screw included. Ti ase - ngled Ti ases - Non Engaged (For bridge/bar) ode : Ø4 mm : 5 mm : 5.5 mm : 0.5 mm T ode : Ø11.5 mm : 20.2 mm -PF-H Gingival Height 0.75 mm 1.5 mm 2.5 mm : Ø4.7 mm : 4 mm : 4.87 mm : 0.53 mm : Ø4.7 mm : 4 mm : 5.62 mm : 0.53 mm : Ø4.7 mm : 4 mm : 6.62 mm : 0.53 mm Ref. No. 5006 * H abutment screw included. Ref. No. 4990 For PreFace abutment holder ode T_0.75_R_S T_1.5_R_S T_2.5_R_S Ref. No. 3833 3841 3843 * S abutment screw included. Screw nalogs Pre-milled lanks ode STL-H I-H N-PM-H : Ø11.5 mm : 20 mm : Ø15.8 mm : 20 mm : 15 mm Ref. No. 7345 7338 4996 ode _PF_S ode W _PF_S H abutment screw For printed models Ref. No. 3854 Ref. No. 3855 S abutment screw included For PreFace abutment holder 4 5
onical Standard onnection SUPPORTE IMPLNTS: NeO (ø3.75, ø4.2, ø5.0) Sirona ompatible Original lpha-io Tec. Ti-ases for Sirona's L locks. Screw nalogs Internal Hex (IH) onnection SUPPORTE IMPLNTS: NeO, SPI, IE, FI, TI Ti ase Scan Post Screws ode STL-S I-S N-PM-S Ref. No. 3510 3459 3838 S abutment screw For printed models ode T-IH-SI SP-IH-SI STLS STLT Ref. No. 4980 4984 5122 5121 Standard abutment screw For lab use (optional) TT-N For Multi-Unit butments onical Hex (H) onnection SUPPORTE IMPLNTS: NeO, SPI, IE, FI, TI, NIE SUPPORTE IMPLNTS: NeO (ø3.5, ø3.2), NIE ual Use Scan odies dhesive opings Ti ase Scan Post Screw Engaged (single tooth) Non Engaged (bridges/bars) Height Height: 7 mm Height: 7 mm ode IOS-TT-N-R IOS-TT-N Ref. No. 3883 5003 * Screw included. For bridge restoration with multi-unit straight and angled abutments For single crown restoration with multi-unit angled abutments Height: 3.5 mm T-TT-N T-TT-N-R 5028 5029 ode T-H-SI SP-H-SI STL-H Ref. No. 4982 4985 7345 H abutment screw (Included in package) Omnicam, lucam, Inlab, erec, Incoris and Zimmer are trademarks or registered trademarks of Sirona ental and Zimmer GMH. lpha-io Tec. is neither endorsed, nor sponsored, nor affiliated with the owner of these trademarks or registered trademarks. For more information please refer to our website. onical Standard (S) onnection SUPPORTE IMPLNTS: NeO (ø3.75, ø4.2, ø5.0) Screws nalog Ti ase Scan Post Screw ode SF-N SFT-N S-M-SR TT-N Ref. No. 6092 6093 4994 5211 Standard multiunit TT-N screw Lab use multiunit TT-N screw For direct mounting Suitable for TT-N and TT-N-R. lso for printed model ode ST-S-SI SSP-S-SI STL-S Ref. No. 3856 3857 3510 * Use 1.25 mm driver @30Ncm. S butment screw 6 7
995-6004 R8/07.18 lpha-io Tec's products are cleared for marketing in the US* and are E-marked in accordance with the ouncil irective 93/42/EE. lpha-io Tec's complies with EN ISO 13485:2016. Product availability may vary between countries. www.alpha-bio.net 8