RenShape Board Materials
Physical properties Application Colour Density (g/cm 3 ) Heat distortion ISO ( C) Coefficient of thermal expansion ISO 359 (0 6 K ) BM 508 White 0.08 BM 505 Styling Apricot 0.4 60 60 70 Sienna 0.3 60 70 60 65 BM 585 Modelling Apricot 0.47 60 70 60 65 0.5 80 50 55 Data Control Models and master models 0.7 80 50 55 0. 60 70 55 60 For layuptools at elevated temperatures (LT prepreg) Green 0.7 0. 35 40 35 45 BM 57 Green. 80 90 80 85 BM 57 Foundry Olive.4 80 90 65 70 BM 573 Red.5 85 90 80 90 BM 5 Hammer forms and flanging tools Grey.5 85 90 95 05 BM 566 Jigs and metalforming Ivory Grey/brown.7.6.7 80 85 90 45 50 40 45 BM 566 Metalforming and thermoforming Dark grey.7 0 5 45 50
Mechanical properties Flexural strength ISO 78 (MPa) Compressive strength ISO 604 (MPa) Compressive modulus ISO 604 (MPa) ShoreDHardness ISO 868 BarcolHardness BM 508 3,7 40 BM 505 6 8 6 8 50 300 0 5 0 5 500 600 BM 585 5 0 5 0 600 700 55 60 5 30 0 5 90 960 60 65 35 40 33 38 600 700 60 65 30 40 50 55 300 400 70 80 60 70 900 000 80 BM 57 80 90 70 80 3300 3500 80 85 0 5 BM 57 70 80 50 60 400 800 80 85 BM 573 70 80 50 60 400 800 80 85 BM 5 55 65 90 00 7000 00 85 90 30 35 BM 566 55 65 95 00 7000 00 85 90 35 40 80 85 5 30 7000 00 85 90 40 45 BM 566
Dimensions/Packaging Dimensions (mm) Volume (l) Weight (kg) Number of boards (per pack) Number of boards (per pallet) BM 508 500 x 00 x 00 500 x 00 x 00 500 x 00 x 400 300 600 00 4 7 48 54 96 08 6 3 BM 505 000 x 000 x 00 000 x 000 x 00 00 400 45 5 9 0 0 5 500 x 500 x 00 500 x 500 x 00 000 x 500 x 00 50 00.5 45 30 6 8 6 BM 585 500 x 500 x 50 500 x 500 x 00 7 8 35 36 40 6 500 x 500 x 5 500 x 500 x 50 500 x 500 x 500 x 500 x 00 500 x 500 x 5 500 x 500 x 50 500 x 500 x 500 x 500 x 00 500 x 500 x 50 500 x 500 x 00 8. 56.5 8. 56.5.5 50 9 0 8 9 8 9 37 38 3 4 6 7 39 40 5 53 78 79 04 05 4 4 64 3 6 6 64 3 6 6 88 500 x 500 x 50 500 x 500 x 00 8 9 56 57 3 6 500 x 500 x 50 500 x 500 x 00 8 56 5 5 BM 57 000 x 500 x 50 000 x 500 x 000 x 500 x 00 5 50 30 3 45 46.5 60 6 4 BM 57 000 x 500 x 50 000 x 500 x 000 x 500 x 00 5 50 35 5.5 70 4 BM 573 000 x 500 x 50 000 x 500 x 00 5 50 4 BM 5 000 x 400 x 50 000 x 400 x 00 0 40 30 60 4 BM 566 0 x 500 x 50 0 x 500 x 00 8. 3 3 63 64 4 0 x 500 x 50 0 x 500 x 00 8. 30 3 6 64 4 BM 566 0 x 500 x 50 0 x 500 x 00 8. 3 3 63 64 4
Bonding System Resin / Hardener Mixing ratio (pbw) Mixture appearance and characteristics Pot life (mins) Minimum clamping time (hours) RenPaste SV 36/ HY 56 00 : 35 white 45 BM 508 BM 505 FC 5 A/B 00 : 00 light beige 5 7 3 5 FC 5 A/B 00 : 00 light beige 5 7 3 5 BM 585 RenPaste SV 47/ HY 56 00 : 35 brown, thin 0 RenGel SW 8/ HY 404 RenGel SW 8/ HY 559 00 : 0 00 : 6 green green 0 5 5 4 5 6 8 BM 57 Araldite AW 06/ HV 953U 00 : 60 transparent 60 90 8 BM 57 00 : 00 BM 573 Araldite AW 06/ HV 953U 00 : 00 transparent 60 90 8 BM 5 BM 566 Araldite AW 06/ HV 953U 00 : 60 transparent 60 90 BM 566
Repair Filler system options Mixing ratio (pbw) Mixture appearance and characteristics Pot life (mins) Minimum clamping time Notes BM 508 Repair with adhesive bonded inserts BM 505 BM 585 XW 584 XW 530 XW 584 XW 530 00 : 3 00 : 3 brown, very fine brown, very fine 4 6 4 6 5 30 mins 5 30 mins Used as fine filler to achieve an extra smooth surface finish Used as a repair filler which gives an extra smooth finish XW 584 XW 530 00 : 3 brown, very fine 4 6 5 30 mins Used as fine filler to achieve an extra smooth surface finish XD 4586 A/B 00 : 9 green 0 30 60 mins BM 57 Repair with adhesives bonded inserts BM 57 BM 573 BM 5 BM 566 AW 0 HW 95 AW 0 HW 95 Araldite AW 5308 HV 5309 RenPIM 59 A/B, 57 B, DT 08 00 : 00 00 : 00 00 : 00 80 : 50 50 : 500 grey, thixotropic grey, thixotropic beige thixotropic 3 5 3 5 30 40 3 hour hour 5 hours 3 hours Alternatively, repair with adhesive bonded inserts Alternatively, repair with bonded inserts Alternatively, repair with bonded inserts Special repair paste on request with adhesives bonded inserts BM 566 RenPIM 59 A/B, 55 B/DT 078 80 : 50 50 : 400 dark grey thixotropic 3 3 hours Alternatively, repair with bonded inserts
Colour Density Key properties Styling / Design Program proving, Design studies, supporting structures for paste etc Models / Data Control Models Exterior and Interior cubings, presentation models, wind turbine models Prototypes / small series Job, Tryout, hammer tools, laminating tools, PIM casting moulds, metalforming, welding jigs, FCubing, thermoplast forming Foundry Industry Pattern plates, core boxes, models, negatives and support tools Ceramics Industry Models, production and working moulds, negatives and support tools Various Prepreg lay up tools User Guide White 0.08 light, fine porous BM 508 smooth Apricot 0.4 surface BM 505 Sienna 0.3 surface structure Apricot 0.47 and mechanical BM 585 0.5 properties increase with 0.7 density 0. excellent surface Green 0.7 0. heat Green. abrasion BM 57 Olive.4 abrasion and low CTE BM 57 Red.5 abrasion BM 573 Grey.5 high impact BM 5 Ivory.7 excellent compressive strength BM 566 Grey/ brown.6.7 good compressive strength, low CTE Dark grey.7 excellent compressive strength, high heat deflection temperature BM 566 best choice possible choice
(Australia) PTY Ltd. Tel: +6 3 980 300 (Austria) GmbH Tel: +43 80 3 (Belgium) Tel: +4 6 966 587 Tel: 0800 49308 Química Brasil Ltda. Tel: +55 553 7348 (Denmark) Tel: +4 6 966 8098 Tel: 0800 80 88 04 (Finland) Tel: +4 6 966 077 Tel: 0800 749 (France) SAS Tel: +4 6 966 843 Tel: 0805 639 90 (Deutschland) GmbH & Co. KG Tel: +4 6 966 579/580 Tel: 0800 0 5790/579 (Hong Kong) Co. Ltd. Tel: +85 48 8800 (India) Private Limited Tel: +9 87 060 (Italy) Srl Tel: +4 6 966 579 (Japan) KK Tel: +8 78 304 3900 (Singapore) Pte Ltd. Tel: +65 6 390 0353 (Spain) SL Tel: +4 6 966 584 (Switzerland) GmbH Tel: +4 6 966 535 Huntsman Ileri Teknoloji Ürünleri Sanayi ve Ticaret Limited Sirketi Tel: +90 6 364 458 Americas Inc. Tel: + 800 85 4784 All recommendations for use of our products, whether given by us in writing, verbally, or to be implied from the results of tests carried out by us, are based on the current state of our knowledge. Notwithstanding any such recommendations the Buyer shall remain responsible for satisfying himself that the products as supplied by us are suitable for his intended process or purpose. Since we cannot control the application, use or processing of the products, we cannot accept responsibility therefore. The Buyer shall ensure that the intended use of the products will not infringe any third party's intellectual property rights. We warrant that our products are free from defects in accordance with and subject to our general conditions of supply. Mandatory and recommended industrial hygiene procedures should be followed whenever our products are being handled and processed. For additional information, please consult the corresponding product safety data sheets. (UK) Limited Duxford Cambridge CB 4QA U.K. Tel: +44 3 493 000 Fax: +44 3 493 00 www.renshape.com Publication no. T.A.S.S.007fGB Araldite, Ren and RenShape are registered trademarks of Huntsman LLC or an affiliate thereof in one or more, but not all, countries. RenPaste, RenGel and RenPIM are trademarks of Huntsman LLC or an affiliate thereof. 004 (Switzerland) GmbH.