ZeoMed and Zeofresh and EcoFresh Ranges of Products SAFETY DATA SHEET

Similar documents
Safety Data Sheet. 1. Identification. 2. Hazard Identification

Barium Sulphate Pw21 Product Code: EX-SU0020 Department: inert pigments & fillers C.A.S.:

: ISOPON WINDSCREEN RESIN (WSR-R-AU)

: #1 Gray. Safety Data Sheet SECTION 1: IDENTIFICATION SECTION 2: HAZARDS IDENTIFICATION SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS

SECTION (2): HAZARDOUS INGREDIENTS Range % (by weight) SECTION (3): PHYSICAL DATA (Typical values. May vary from sample to sample)

: Bicarbonate Concentrate Powder

: POWER SHOT UNI PRO BORIC INSECTICIDE DUST

: Ampicillin for Injection

Target Molecule Material Safety Data Sheet Reversion Date 12/02/ PRODUCT AND COMPANY IDENTIFICATION

: exact color Activator

Calcium Carbonate Chalk -coarse 21um Product Code: EX-CA0035 Department: inert pigments & fillers C.A.S.: , ,

Oxacillin for Injection Safety Data Sheet

S A F E T Y D A T A S H E E T IntelliBond Vital 3

1.4. Emergency telephone number : CHEM TEL: (24hr); Outside the US: (collect call)

SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification

NPK Fertilizer SAFETY DATA SHEET (SDS) OSHA Haz Com Standard 29 CFR Prepared to GHS Rev03.

NAME: ZINC OXIDE POWDER USP SDS NO. 3501

HELENA LABORATORIES 1530 Lindbergh Dr. / P.O. Box 752 Beaumont, TX USA Toll Free SPIFE 4000 IFE Kit

AVANTI POLAR LIPIDS SAFETY DATA SHEET Page 1 of 6

: Penetreat. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification

SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification

: Liquid Bicarbonate Concentrate

SAFETY DATA SHEET (Globally Harmonized System)

PRODUCT: Ethyl alcohol (denatured) CHEMICAL ABSTRACT NO.: Mixture. Ethyl alcohol ppm Flammable

Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

Use only for the purpose on the product label.

SAFETY DATA SHEET. Allyl phenoxyacetate

Material Safety Data Sheet

Safety Data Sheet 1511BR

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET SECTION 1: PRODUCT IDENTIFICATION PRODUCT: Hand Sanitizer Product Label Name:

Protective Equipment: Hazards Identification: ZINC OXIDE POWDER - COA - MSDS.

: Pro 1 Oil Supplement

S A F E T Y D A T A S H E E T

SAFETY DATA SHEET WF32 OIL

Proteinase K Solution

SAFETY DATA SHEET. Section 1. IDENTIFICATION

SDS Safety Data Sheets

Safety Data Sheet. Zinc Benzoate Zinc Benzoate. Section 1 - Chemical Product and Company Identification. Section 2 - Hazards Identification

Revision Number: Issue date: 10/04/ PRODUCT AND COMPANY IDENTIFICATION. IDH number: HAZARDS IDENTIFICATION

FERTILIZER. Safety Data Sheet. OSHA Haz Com Standard 29 CFR V Kraft Rd Lakeland, FL

Material Safety Data Sheet (MSDS)

SAFTY DATA SHEET According to Regulation (EC) No 1907/2006 (REACH) Revision Date: March 10, 2017

: ARGININE HYDROCHLORIDE CRS

MATERIAL SAFETY DATA SHEET

: Sweat Controls for Cystic Fibrosis Testing

SAFETY DATA SHEET. Product Name: HUMIPLUS ULTIMATE ZN CHELATE. Page 1 of 5. Classification of the Substance or Mixture.

MSDS Material Safety Data Sheet

SPECTINOMYCIN DIHYDRCHLORIDE PENTAHYDRATE

3.1. Substances Not applicable 3.2. Mixtures Name Product identifier % 1,3,4-Thiadiazole, 2,5-bis(octyldithio)- (CAS-No.)

SAFETY DATA SHEET BWT-12 P

Safety Data Sheet according to the Hazard Communication Standard (CFR ) HazCom 2012.

: Pulastic GM-2000 (A)

: SikaSeal Roof & Gutter

SAFETY DATA SHEET (SDS)

Chemical Name: Complex Chloride Sodium Chloride, Potassium Chloride, Magnesium Chloride, Calcium Chloride

SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

: ProSpec Moisture Guard Max Part A

SAFETY DATA SHEET (SDS)

MATERIAL SAFETY DATA SHEET

Safety Data Sheet. Isosorbide Mononitrate Extended Release Tablets 30 mg, 60 mg and 120 mg Oxycodone Hydrochloride Tablets 10mg

SAFETY DATA SHEET Sodium Phosphate Stock Solution (500 mm, ph 8.0)

SAFETY DATA SHEET. Product Name: Tecnu Extreme Medicated Poison Ivy Scrub Page 1 of 5 Tec Laboratories, Inc. Issue Date: 4/13/2015 Revision No: 00

Safety Data Sheet. Section 1: Identification. Section 2: Hazard Identification. Down To Earth Distributors, Inc Judkins Road Eugene, OR 97403

SECTION 1. PRODUCT & COMPANY INFORMATION

1. Identification of the substance/mixture and of the company/undertaking

: Benefect Botanical Impact Cleaner

H320 - Causes eye irritation H335 - May cause respiratory irritation

SAFETY DATA SHEET Sparific Salts

Safety Data Sheet. (Magnesium Oxide) Magnesium Oxide DATE PREPARED: 9/11/2015. Section 1. Product and Company Identification

: Aquamira Water Treatment Part B

SAFETY DATA SHEET (SDS)

Whyte Gate, Inc. SAFETY DATA SHEET

SAFETY DATA SHEET. SECTION 1: Identification of the substance/mixture and of the company/undertaking

MATERIAL SAFETY DATA SHEET C437P VER 11-1 DATE: 10/4/11 SW

3.1. Substance Not applicable Mixture Name Product identifier %

Safety Data Sheet AERO VOMIT CONTROL. SECTION 1: Identification. SECTION 2: Hazards Identification 1.00 ENG 2.00

SAFETY DATA SHEET SECTION 1 - IDENTIFICATION

Use only for the purpose on the product label.

Kite Shield Page: 1 of 5 Date: April 15, 2016

PRODUCT SAFETY DATA SHEET

SIGMA-ALDRICH. Material Safety Data Sheet Version 4.0 Revision Date 02/28/2010 Print Date 08/24/2011

SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name : Azur A

Pulpdent Corporation Revision Date: May 7, 2014

SAFETY DATA SHEET. 1. Identification of the substance or preparation and the company/ undertaking. In vitro diagnostic product; Laboratory chemical

MATERIAL SAFETY DATA SHEET (MSDS) SODIUM SELENITE. Section 1 - Chemical Product and Company Identification

SAFETY DATA SHEET Sodium Phosphate Stock Solution (500 mm, ph 6.0)

MOLDEX Mold Killer Version 1.0 Revision Date:

: Goo Gone Tough Task Wipes

SAFETY DATA SHEET BWT-12 L

SAFETY DATA SHEET (SDS) Acetate Buffer, ph 4.0 with Activator 01. Product and Company Identification

Version 0.1 Revision Date 06/02/2015 Print Date 06/02/2015

MATERIAL SAFETY DATA SHEET

SECTION 1: Identification. SECTION 2: Hazard identification. SECTION 3: Composition/information on ingredients. SECTION 4: First aid measures

Transcription:

ZeoMed and Zeofresh and EcoFresh Ranges of Products SAFETY DATA SHEET Section 1: Identification Product Name: ZeoMed and ZeoFresh and EcoFresh Ranges of Products Product Name: ZeoFresh Infectious Waste Body Fluid Clean-Up Absorbent Powder / EcoFresh products / ZeoFesh Products Use(s): Selectively removes ingredients from mixtures on the basis of molecular size. Manufacturer Enware Australia Pty Limited 9 Endeavour Road Caringbah NSW 2229 Phone : +61 2 8556 4000 Section 2: Hazard(s) Identification 2.1 GHS Classification Specific target organ toxicity single exposure (Category 3) 2.2 GHS Label Elements Pictogram Signal Word: WARNING Hazard statement(s) H335 May cause respiratory irritation. Precautionary statement(s) Prevention P261 Avoid breathing dust / fume / mist / vapours / spray P271 Use only out doors or in a well ventilated area Page 1 of 7

Response P304 + P340 P312 IF INHALED: remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTRE or doctor / physician if you are unwell. Storage P403+ P233 Store in a well ventilated place. Keep container tightly closed. Disposal P501 Dispose of contents / container to an approved waste disposal plant. Section 3: Composition/Information on Ingredients Chemical Entity Name CAS No. Proportion % Hydrous Sodium Aluminosilicate, Natural Clinotilolite 1318-02-1 100% Section 4: First Aid Measures Inhalation: Eye Contact: Skin Contact: Ingestion: Remove to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. DO NOT use mouth-to-mouth respiration. Flush with copious amounts of water for at least 15 minutes. Assure adequate flushing by separating eyelids with fingertips. Seek medical attention. Flush with copious amounts of water for at least 15 minutes, remove contaminated clothing and shoes. If irritation continues after flushing seek medical attention. If conscious and alert, rinse mouth and drink 2-4 cupfuls of water or Page 2 of 7

milk. Seek medical attention. DO NOT induce vomiting. Important Symptoms (acute or delayed) or Effects Slight to moderate eye irritation. May cause skin irritation. May cause irritation of mucus membranes and the upper respiratory tract causing coughing and sneezing. Prolonged and repeated exposure to skin may cause irritation or dermatitis. Section 5: Fire-Fighting Measures Extinguishing Media Suitable extinguishing Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. media Special hazards arising Nature of decomposition products not known From the substance or Mixture Advice for firefighters Wear self-contained breathing apparatus for firefighting if necessary Further information Section 6: Accidental Release Measures Personal Precautions: Avoid generally dusty conditions and provide adequate ventilation. Emergency Procedures: Clean up spills immediately, using appropriate protective equipment. Clean up Procedures: Vacuum, sweep up or absorb material and place into a suitable disposal container. Reference to other For disposal see section 13. sections: Page 3 of 7

Section 7: Handling and Storage Precautions for safe handling: Recommendations for Safe storage including In compatibilities:. Use dust control and protection in handling and storage. Store in a closed container in a cool and dry place to avoid slow reactions with carbon dioxide and moisture in air. Avoid storage near magnesium, aluminum + hexchloroethane, zinc chloride or strong oxidizing agents: reacts violently with phosphorus pentachloride, chlorine trichloride, or bromine pentafluroide. Section 8: Exposure Controls/Personal Protection Material: OSHA PEL: ACGIH TLV: Controls: Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits. Respiratory Protection; Use NIOSH approved respirators when necessary. Skin Protection: Wear suitable protective gloves and clothing. Eye Protection: Wear protective glasses or chemical safety goggles. Other protective Equipment: None Section 9: Physical and Chemical Properties Colour / Appearance: Tan/white particle mixture Odour: Odourless Odour Threshold: Boiling Point: Melting Point: Flash Point: Evaporation Rate: Upper/ Lower Flammability: Page 4 of 7

Flammability: Vapour Pressure: Vapour Density: Relative Density: Solubility in water: ph: Partition coefficient: Auto-ignition Temperature: Decomposition Temperature: Viscosity: Not flammable Section 10: Stability and Reactivity Chemical Stability: stable under normal temperature and pressure. Other: Hazardous Polymerization: None Incompatibility: Lithium at 200 C, chlorinated rubber, linseed oil, aluminum + hexchloroethane,, zinc chloride or strong oxidizing agents, reacts violently with phosphorus pentachloride, or bromine pentafluroide. Decomposition Products: Toxic gases such as metal fumes may be released in a fire. Section 11: Toxicological Information Likely Routes of Exposure: Eye and skin contact, inhalation, ingestion. Effects: Acute Health Hazards: May cause irritation of the skin and eyes. Inhalation of dust may cause irritation of mucus membranes and the upper respiratory tract causing coughing and sneezing. Chronic Heath Hazards: Prolonged and repeated exposure to skin may cause irritation or dermatitis. Measures of Toxicity: MgO Acute Oral: LD 50 > 5g/kg Acute Dermal Irritation : EPA Category IV, non-irritating Acute Eye Irritation: EPA Toxicity Category III, slightly irritating Page 5 of 7

Skin Sensitiser: Non-sensitiser Acute Inhalation: EPA Category IV, non-toxic ZnO Acute Oral: LD 50 > 2g/kg Acute Dermal : LD 50 > 5g/kg Acute Dermal Irritation: PII = 0, non-irritating Acute Eye Irritation: Moderately irritating Skin Sensitiser: Non-sensitiser TiO 2 Acute Oral: LD 50 > 2g/kg Acute Dermal: LD 50 > 5g/kg Acute Dermal Irritation: PII = 0, non-irritating Acute Eye Irritation: Practically non-irritating Skin Sensitiser: Non-sensitiser Acute Inhalation: EPA Category IV, non-toxic Section 12: Ecological Information There is no data available for this product.. Section 13: Disposal Information Dispose of in accordance with federal, state and local council regulations. Can be landfilled or incinerated, when in compliance with local council regulations. Section 14: Transportation Information NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS: UN, IATA,IMDG Section 15: Regulatory Information Page 6 of 7

Additional Information None Section 16: Other Information Revision Date: Thursday, May 26, 2016 This SDS has been prepared in accordance with the Code of Practice for the Preparation of Safety Data Sheets for Hazardous Chemicals - December 2011 This product has been labeled in accordance with the Code of Practice Labelling of Workplace Hazardous Chemical - March 2015 All components of this material are listed in the Australian Inventory of Chemical Substances (AICS) as per the Industrial Chemicals (Notification & Assessment Act) 1989. Sources of Data: Suppliers Safety Data Sheets for the ingredients Disclaimer: In providing this Safety Data Sheet, Enware Australia Pty Ltd. have not taken into account your particular objectives, situation or needs you should assess whether the information contained in it is appropriate to your objectives, situation or needs. Subject to rights and terms implied by law, Enware Australia Pty Limited take no responsibility for any error, omission or defect in the information contained in this Safety Data Sheet and make no representation about the accuracy or suitability of the information. In particular, you should note that this Safety Data Sheet is compiled from a variety of sources and Enware Australia Pty Limited are unable to verify the accuracy of the information provided to it. This Safety Data Sheet is provided subject to the Terms entered into you and Enware Australia Pty Limited. Contact Points: General Information: Specialist Information: Enware Australia Pty Limited Compliance Manager (02) 8536 4000 Business Development Manager Safety Environment. (02) 8536 4000 End of SDS Page 7 of 7