Stock Prosthetic Guide 2014
Straumann Variobase Versatile & Cost-effective Abutment Solution The new Straumann Variobase Abutment delivers a highly cost-effective solution for screw or cement-retained single crowns or cement-retained bridges on either Bone or Tissue-level implants. Used with conventional wax-up techniques or digital processes, the Straumann Variobase Abutment provides you and your clients with all the benefits of using Straumann original components. For more information about the Straumann Variobase Abutment contact Straumann on 01293 651230 or visit www.straumann.co.uk/variobase
Straumann ental Implant System Overview STOCK PROSTETICS N (Narrow Neck CrossFit ) Ø 3.5 mm Transfer parts CrossFit Solid ybrid 048.173 048.128 048.134 048.579 048.197V4 3 0 048.127 4 048.587/588/589 048.527/528/529 025.0120-04 0 Prosthetic restoration screw-retained or cement-retained cement-retained LOCATOR Case planning (V4 only) 048.943V4-048.945V4 048.952V4-048.954V4 048.946V4-048.951V4 Titanium/gold abutments 63 190 * type A type B * * 048.709 048.592 048.593 048.598 048.621/622 048.547/548/549 048.581 048.586 Temporary restorations Protective caps 22 10 048.501 048.502 048.699 048.658/ 048.659 048.700/701/702 Titanium copings 38 048.182V2 048.189V2 Ceramic abutments/copings Gold copings Plastic copings 20 048.267V4 048.256/ 048.257/ 048.258 048.263/ 048.264 Auxiliary parts Screws 19 048.313 048.313 048.314 048.196V20 Transfer aids Crown u Not for hollow cylinder implants, 15 V2 = 2 components per pack Bridge uu The long RN synocta angled abutments (048.610/048.611/048.615/048.616) are still available V4 = 4 components per pack Bar V20 = 20 components per pack * Cement-retained only -04 = 4 components per pack
Straumann ental Implant System Overview RN (Regular Neck) Ø 4.8 mm STOCK PROSTETICS Transfer parts synocta 33 10 13 048.090 048.010 048.168 048.017V4 048.070V4 048.068 048.088 048.129 048.124 Prosthetic restoration screw-retained screw-retained or cement-retained cement-retained Case planning (V4 only) Titanium/gold abutments 048.929V4 048.921V4 u/uu 048.916/917/918/919V4 048.930V4 63 190 048.601 048.620 048.710 048.642 u/uu 048.612/613/617/618 048.605 Temporary restorations Protective caps 048.715 048.716 048.664 Titanium copings 81 81 81 048.241 048.240 048.571 Gold copings 115 115 115 048.632 048.633 048.634 Plastic copings 1 20 8 048.227 048.229 048.665 048.268V4 048.676V4 048.670 048.662 048.663 Auxiliary parts Screws 11 39 39 6 11 048.350 048.360V4 048.361V4 049.154 048.672 048.356 048.350 048.354 048.356 Transfer aids 14 14 14 048.003V4 048.000V4 048.059V4 Crown u Not for hollow cylinder implants, 15 V2 = 2 components per pack Bridge uu The long RN synocta angled abutments (048.610/048.611/048.615/048.616) are still available V4 = 4 components per pack Bar V20 = 20 components per pack -04 = 4 components per pack
RN (Regular Neck) Ø 4.8 mm WN (Wide Neck) Ø 6.5 mm Solid ybrid 7) synocta Solid ybrid 10 048.017V4 048.017V4 10 3 4 3 048.013 048.013 3 13 15 0 4 0 048.060/061/062V4 048.197V4 0 048.091 048.069 048.169 048.089 048.013 048.095 048.065/066 048.197V4 6 0 048.160/161/162 048.117V4 048.109 048.198V4 retentive screw/ cement-retained LOCATOR anchor cement retained 3) 048.172 048.171 048.165/166 048.140 048.198V4 screw-retained cement-retained cement-retained LOCATOR 6) 048.926/927/928V4 048.275V4 280V4 3) 63 048.931V4 048.933V4 048.934V4 048.932V4 190 048.938V4 048.939V4 048.283V4-287V4 6) 048.540 048.541 048.542 048.439 048.175 048.180 048.711 048.603 048.644 048.608 048.609 048.606 048.545 048.546 048.183 048.187 22 26 22 10 048.654/ 655 048.047/048/049V4 048.717 048.718 048.242 048.656/ 657 048.051/052 5) 4) 5) 5 38 81 4) 5) 38 048.450 048.182V2 048.189V2 048.573 048.182V2/048.189V2 5) 47 115 115 048.456 048.638 048.639 20 048.246 048.245 048.269V4 048.666 048.667 048.678 048.244 048.243 048.248 048.247 19 11 39 19 048.196V20 048.350 048.361V4 048.356 048.356 048.196V20 4 14 048.356 048.032 048.054V4 1) Order via your local Straumann CARES CACAM Laboratory 2) Manufactured at the Straumann CACAM production centre 3) Available in 6 different heights 4) Complete LOCATOR part list in product catalogue 5) For replacement parts, see product catalogue 6) Available in 5 different heights 7) Bar and magnetic options are available VITA CA-Temp is a trademark of VITA Zahnfabrik, Germany LOCATOR is a registered trademark of Zest Anchors, Inc., USA.
Straumann ental Implant System PROSTETICS System Overview STRAUMANN BONE LEVEL IMPLANT Implant Level Impression Soft tissue management ealing abutment Sh 33 33 conical bottle shape conical bottle shape 3.6 mm 4.8 mm 3.3 mm 4.5 mm 6 mm 4.4/4.7 mm 024.2222 024.2242 024.4222 024.4242 33 33 3.5 mm 024.2224 024.2244 024.2234 4 mm 024.4224 024.4244 024.4234 5 mm 024.2226 024.2246 024.2236 6 mm 024.4226 024.4246 024.4236 Impression Impression post closed tray 025.2201 025.4201 System open tray short long 025.2202 025.4202 025.2205 025.4205 Anatomic, Anatomic IPS e.max Variobase & Meso Gold Planning PLAN abutment G PLAN abutment, 0 15 0 15 025.2601-04 025.2603-04 025.4601-04 025.4603-04 G 3.5 mm 025.2602-04 025.2604-04 025.4602-04 025.4604-04 Crown Bridge 025.2610-04 025.4610-04 025.4630-04 Final restoration Abutment* G, 0 15 0 15 022.2102 022.2152 022.4102 022.4152 G 3.5 mm 022.2104 022.2154 022.4104 022.4154 Meso Abutment* 022.2202 022.4202 190 190 Anatomic IPS e.max abutment* 5 G 5 Variobase Abutment* 63 Abutment* Crown 022.2410 022.4410, 0 15 025.2921 025.4921 Bridge 022.4430 Opacity MO 0 MO 1 MO 0 MO 1 G 3.5 mm G 3.5 mm 022.2812 022.2832 022.2822 022.2842 022.2814 022.2834 022.2824 022.2844 022.4812 022.4832 022.4822 022.4842 022.4814 022.4834 022.4824 022.4844 Variobase Burnout Coping 20 20 023.2756-04 023.4759-04 Copings and auxiliaries Basal screw (replacement) Bs (Ti) Bs (ZrO 2 ) 025.2900 025.4900 025.2906 025.4906 Basal screw (replacement) 025.2900 025.4900 Basal screw (replacement) Crown Bridge 025.2900 025.4900 025.4902 = Narrow CrossFit = Regular CrossFit Sh = Shape = iameter, = Angulation L = Length = eight G = Gingiva eight A = Abutment eight *Basal Screw included **Occlusal Screw included -04 = Pack of 4 V2 = Pack of 2 V4 = Pack of 4 V20 = Pack of 20 IPS e.max is a registered trademark of Ivoclar Vivadent AG, Liechtenstein.
Straumann ental Implant System PROSTETICS System Overview STRAUMANN BONE LEVEL IMPLANT Abutment Level Impression Impression taking on implant level possible (see left) Soft tissue management Customisable healing abutment 33 024.2270S 024.4270S Temporary abutment VITA CA-Temp Ti Crown Ti Bridge 024.2372 024.4372 024.2371 024.4371 024.2375 024.4375 Impression Implant analog Bite registration aid 21 21 LOCATOR Impression Coping 0 LOCATOR Block-out spacer 19 0 LOCATOR Analog Repositionable implant analog 025.2101 025.4101 025.2102 025.4102 8 mm 1 025.2208-04 025.4208-04 025.2212-04 025.4212-04 048.197V4 048.196V20 025.0120-04 igital Bar LOCATOR Planning PLAN abutment 1 mm 3 mm 4 mm 5 mm 6 mm 025.4641-04 025.2642-04 025.4642-04 025.2643-04 025.4643-04 025.2644-04 025.4644-04 025.2645-04 025.4645-04 025.2646-04 025.4646-04 Final restoration Abutment 1 mm 022.4501 022.2502 022.4502 Abutment* 190 Gold 022.2701 022.4701 Ti 022.2702 022.4702 3 mm 4 mm 5 mm 6 mm 022.2503 022.4503 022.2504 022.4504 022.2505 022.4505 022.2506 022.4506 Copings and auxiliaries Auxiliaries (replacement), for Straumann CARES Abutment Straumann Scanbody Straumann CARES Mono Scanbody Wax-up sleeve Basal Screw (Ti) Basal Screw (ZrO 2 ) 025.2905 025.4905 025.2915 025.4915 025.2903 025.4903 025.2900 025.4900 025.2906 025.4906 Basal screw (replacement) 025.2900 025.4900 Auxiliaries, for LOCATOR abutment ivergence Male processing pack 048.188V4 (Orange) Replacement male Extra Light Light Standard 0-10 10-20 048.189V2 048.182V2 048.192V4 (Blue) 048.191V4 (Pink) 048.190V4 (White) 048.194V4 (Red) 048.193V4 (Green) 36 = Narrow CrossFit = Regular CrossFit Sh = Shape = iameter, = Angulation L = Length = eight G = Gingiva eight A = Abutment eight *Basal Screw included **Occlusal Screw included
STRAUMANN BONE LEVEL IMPLANT Abutment Level Impression Impression taking on implant level possible (see left) Protective cap 26 Temporary coping 22 4 mm 5.5 mm 024.2312-04 024.2322-04 024.4322-04 024.4332-04 024.2316-04 024.2326-04 024.4326-04 024.4336-04 4 mm A 024.2346 024.2356 024.4356 024.4366 5.5 mm Impression cap 21 21 21 21 Implant analog A 4 mm code 5.5 mm code 025.2203-04 025.2204-04 025.4203-04 025.4204-04 025.2220-04 025.4220-04 025.4230-04 A 4 mm code 5.5 mm code 025.2112 025.2122 025.4132 025.4122 025.2116 025.2126 025.4136 025.4126 Cementable A PLAN abutment G 1 mm 025.2611-04 025.2621-04 025.4621-04 025.4631-04 4 mm G 025.2612-04 025.2622-04 025.4622-04 025.4632-04 A 3 mm 1 mm 025.2613-04 025.2623-04 025.4623-04 025.4633-04 025.2615-04 025.2625-04 025.4625-04 025.4635-04 5.5 mm G 025.2616-04 025.2626-04 025.4626-04 025.4636-04 3 mm 025.2617-04 025.2627-04 025.4627-04 025.4637-04 A Abutment* G 1 mm 022.2311 022.2321 022.4321 022.4331 4 mm code G 022.2312 022.2322 022.4322 022.4332 A 3 mm 1 mm 022.2313 022.2323 022.4323 022.4333 022.2315 022.2325 022.4325 022.4335 5.5 mm code G 022.2316 022.2326 022.4326 022.4336 3 mm 022.2317 022.2327 022.4327 022.4337 Coping Basal screw (replacement) Transfer aid 14 025.2908 025.4908 Crown 023.2316 023.2326 023.4326 023.4336 025.2911-04 025.2912-04 025.4912-04 025.4913-04 Bridge 023.2310 023.2320 023.4320 023.4330
STRAUMANN BONE LEVEL IMPLANT Abutment Level Impression Impression taking on implant level possible (see left) Protective cap 26 / 3.5mm 4.6mm 5mm 6.5mm 8mm 5.1mm 6.6mm 8.1mm 024.2323-04 024.2324-04 024.2325-04 024.4323-04 024.4324-04 024.4325-04 6 Impressioning Implant Analog / 3.5mm 4.6mm Open 025.2243 025.2244 Closed 025.2245 025.2246 Scanbody 025.0000 025.0001 / 3.5mm 4.6mm Angle 0 0 Angled 023.2754 023.4756 023.4757 Screw-retained PLAN Abutment (in 2.5mm G only) / 3.5mm 4.6mm 4.6mm Angle 0 0 17 30 0 17 30 025.2648-04 025.2650-04 Type A 025.2655-04 Type A 025.2653-04 Type A 025.4649-04 Type A 025.4653-04 Type B 025.2658-04 Type B 025.2660-04 Type B 025.4650-04 Type B 025.4660-04 Abutment / 3.5mm 4.6mm 4.6mm Angle 0 0 17 30 0 17 30 1mm 022.2745 022.2747 - - 022.4745 - - 2.5mm 022.2746 022.2748 Type A 022.2749 Type A 022.2751 022.4746 Type A 022.4747 Type A 022.4749 Type B 022.2750 Type B 022.2752 Type B 022.4748 Type B 022.4750 4mm 022.2753 022.2754 Type A 022.2755 Type A 022.2757 022.4751 Type A 022.4752 Type A 022.4754 Type B 022.2756 Type B 022.2758 Type B 022.4753 Type B 022.4755 29 5 Coping Screws 3.5mm 4.6mm Bridge Gold* 023.2752 023.4754 Ti 023.2749 023.4751 Polymer 023.2755 023.4758 Bar Gold* 023.2753 023.4755 Ti 023.2750 023.4752 Bridge Gold* 023.2751 023.4753 Ti 023.2747 023.4747 Polymer 023.2748 023.4748 / Occlusal 023.4763 Basel Screw Straight G 1mm 023.4749 G 2.5mm 023.4750 G 4mm 023.4760 Basel Screw Angled 025.0002 Surgical Guide* 026.0016 99-04 = Pack of 4 V2 = Pack of 2 V4 = Pack of 4 V20 = Pack of 20 *Scheduled for Q3 2014 IPS e.max is a registered trademark of Ivoclar Vivadent AG, Liechtenstein. VITA CA-Temp is a trademark of VITA Zahnfabrik, Germany.
New Screw-retained Solutions from Straumann Createch Medical Createch Medical is a dental engineering company Straumann has partnered with to provide a wide range of CACAM structure solutions for implant-borne dental prostheses. Their expertise is available as a remote design service to any dental laboratory. Simply send your model to Createch Medical for measurement and design; review and approve the proposed design, and get a high-quality, fully milled restoration ready for finishing in the lab in around 7 working days (including shipping). Prosthetic choice Titanium Cobalt Chrome Original Straumann connections Fixed or removable Implant or abutment-level connection Resin restorations ybrid (advanced and basic) Bars Telescopic hybrid Removable telescopic Ceramic restorations Anatomic bridge Abutment hybrid
An excellent combination of scientifically proven implants and sleek prosthetic components The new Straumann Screw-retained Abutment provides a wide range of prosthetic options for screw-retained restorations. Various angulations and gingiva heights offer the flexibility to provide an individual solution for edentulous patients, including restoring posterior-tilted implants.* Straumann Screw-retained Abutment Same connector design for all diameters allow for a streamlined portfolio of tertiary components Abutment angulations of 0, 17 and 30 Only 2 diameters to cover complete Straumann Bone Level product line Product design allows abutment-level impression Simplified handling with the CrossFit connection ifferent gingiva heights of 1 mm, 2.5 mm and 4 mm Straumann Bone Level Implants Our unique Roxolid material has been specifically designed for dental implantology and delivers outstanding mechanical results In combination with the Straumann SLActive surface, Straumann delivers an excellent implant system with outstanding osseointegration and healing properties Final restorations Straumann offers components for conventional screw-retained frameworks, and CACAM customised frameworks for both implant and abutment-level through our Leipzig milling centre, or via our partnership with Createch Medical *Freiberger I., Al-Nawas B. Non-Interventional Study on Success and Survival of TiZr Implants. European Association of Osseointegration 20th Annual Scientific Meeting, Copenhagen, enmark, October 2012: Poster presentation. Other Source: ata base Non-interventional study, data on file.
Straumann Ltd 3 Pegasus Place Gatwick Road Crawley West Sussex R10 9AY Tel: +44 (0) 1293 651230 Fax: +44 (0) 1293 651230 www.straumann.com