Reimagine Tomorrow! Products Experience

Reimagine Tomorrow! Products Experience

ISOCYANATES ( PU Rigid - Flexible Foam and CASE ) Product Description NCO Content % wt Main Applications P-MDI M-MDI L-MDI OP-50 Polymethylene polyphenyl isocyanate Diphenylmethane 4,4 Diisocyanate carbo-diimide modified 4,4'- diphenylmethane-diisocyanate Liquid MDI monomeric diphenylmethane diisocyanate (MDI) containing higher 2,4 -, 2,2 diphenylmethane diisocyante percentage 30,0-32,0 33,4 min 27,5-28,5 33,4 min Rigid insulating foams, semi-rigid integral skin, structural foams, elastomers and adhesives. Elastomers, adhesives, coatings, fibres, flexible-and semi-flexible integral foams and thermoplastic polyurethanes Microcellular elastomers, RIM elastomers, coatings and cast elastomers. Used in coating, paint, floor and for manufacture many household and sporting goods as a row material TDI 80-20 TDI 65-35 Description Toluene diisocyanate isomer mixture Toluene diisocyanate isomer mixture 2,4 Isomer content % wt Main Applications 79 min Flexible foams, coatings or adhesives. 65 min Flexible foams, coatings or adhesives. TDI 100 Toluene diisocyanate 98,5 min Coatings or adhesives. Product Description NCO Content % wt Main Applications NDI 1,5-Naphthylene diisocyanate 40 Elastomer and microcellular XDI HDI IPDI H12 MDI 1,3-Bis(isocyanatomethyl)benzene Hexamethylene-1,6-diisocyanate (Isophorone diisocyanate better resistance to yellowing than those from aromatic diisocyanates, such as tolylene diisocyanate (TDI) and diphenyl methane diisocyanate (MDI). igher reactivity HDI is used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous dispersible polyurethane polymers (PUD) showing exceptional weathering resistance and flexibility IPDI is used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous dispersible polyurethane polymers (PUD) showing exceptional weathering resistance

POLYOLS ( PU Rigid - Flexible Foam ) Product Functi onalit y Eq. Hydroxy value mg KOH/g Viscosity at 25 C mpa.s S 360 4,7 360-400 2000-3500 S 400 5-5,5 400-450 4000-6000 S 480 5-5,5 460-490 6500-9000 M 410 4,5 400-450 M 500 4 480-520 6000-13000 9000-16000 G 36 3 33-39 700-1000 G 28 3 25-31 800-1000 G 160 3 150-170 260-300 G 400 3 360-410 380-430 G 250 3 230-270 240-300 P 48-Standard 3 47-49 500-550 PP 10 3 39-43 800-1050 PP 15 3 37-41 1100-1300 PP 27 3 33-37 2200-4200 Description (Sucrose Based) (Sucrose Based) (Sucrose Based) Aromatic Polyol (Mannich Based) Aromatic Polyol (Mannich Based) (Glycerol Based) M.W. 4700 (Glycerol Based) M.W.6000 (Glycerol Based) M.W.1000 (Glycerol Based) M.W.420 (Glycerol Based) M.W.670 non-reactive polymer polyol 3500 MW non-reactive polymer polyol, about 10% solid substance non-reactive polymer polyol, about 15% solid substance non-reactive polymer polyol, about 27% solid substance Main Applications Rigid Pu foam. Building and Industrial Thermal Insulation, Packaging, Wood imitation. Rigid Pu foam. Building and Industrial Thermal Insulation, Packaging, Wood imitation. Rigid Pu foam. Building and Industrial Thermal Insulation, Packaging, Wood imitation. Rigid systems for panels in continuous and discontinuous, Spray with better fire resistance. Rigid systems for panels in continuous and discontinuous, Spray with better fire resistance. Semi-Rigid/Integral Skin self-skinning foam for automotive industry. Semi-Rigid/Integral Skin self-skinning foam for automotive industry used in cold moulding (high resilience foam). Low viscosity polyol used in combination with other polyols. For Pu compact/structural in furnishing. Low viscosity polyol used in combination with other polyols. For Pu compact/structural in furnishing. Blending polyol suitable for high contents of water rigid systems. SLAB - flexible polyurethane foam SLAB - flexible polyurethane foams SLAB - flexible polyurethane foams SLAB - flexible polyurethane foam Product Description Main Applications SORBITOL Polyols AMMINIC Polyols ESTER Polyols B IO - Polyols s (Sorbitol Based) s (Amines Based) Aromatic Polyester polyols (different MW, on request) Bio Polyol based (different MW, on request) Rigid Pu foam. Building and Industrial Thermal Insulation, Packaging, Wood imitation. Rigid Pu foam. Building and Industrial Thermal Insulation, Packaging, Wood imitation. Rigid Foams Flexible Face Lamination (FFL) Rigid Pu foam. Building and Industrial Thermal Insulation, Packaging, Wood imitation.

POLYOLS ( PU - CASE ) Product Molecul ar Weight Hydroxy Number mg KOH/g PTMG 650 650±50 - PTMG 1000 1000±50 106,9-118,1 PTMG 2000 2000±50 54,7-57,5 PTMG 3000 3000±50 36,2-38,7 Description Polytetramethylene ether glycol Polytetramethylene ether glycol Polytetramethylene ether glycol Polytetramethylene ether glycol Main Applications High performance PU TPU's elastomers, coatings and elastomeric fibers. High performance PU TPU's elastomers, coatings and elastomeric fibers. High performance PU TPU's elastomers, coatings and elastomeric fibers. High performance PU TPU's elastomers, coatings and elastomeric fibers Product Description Main Applications ESTER polyols Aromatic Polyester polyols (different MW, on request) High performance PU TPU's elastomers, coatings and elastomeric fibers. B IO - Polyols Bio Polyol sbased (different MW, on request) High performance PU TPU's elastomers, coatings and elastomeric fibers. Product Description Main Applications PPG 250 (A) Polypropylene glicol (PPG M.W. 400) (A) = FDA GRADE Polypropylene glycol (PPG M.W. 1000) PPG 120 (A) (A) = FDA GRADE Elastomers, coatings. Blending polyol for low viscosity rigid foam. Flexible foam, adhesives, antifoaming agent, lubrication, polyesters syntesis. PPG 56 (A) Polypropylene glycol (PPG M.W. 2000) (A) = FDA GRADE Flexible foam, elastomers, coatings, adhesives, antifoaming agent, lubrication. PEG 200 Polyethylene glycol (M.W. 200) Microcellular, elastomers. PEG 300 Polyethylene glycol (M.W. 300) Microcellular, elastomers. PEG 400 Polyethylene glycol (M.W. 400) Microcellular, elastomers. GLICERINA Glycerine Various.

Wide Progressing Efficiency(High, Medium, Low) Suitable for FR Foams General Purpose High Density Low Density Low volatility SILICONES ( PU Rigid - Flexible Foam and CASE ) PU FLEXIBLE FOAM Conventional Foam High Resilience Foam Product type Product Description AK-6678 L AK-6688/ AK-6689 M low activity silicone surfactant, suitable for density 25~45kg/m 3 formulation middle activity silicone surfactant,, suitable for density 13~30kg/m 3 formulation AK-6610 H high activity f silicone surfactant,, suitable for density below 6-25kg/m 3 formulation AK-7335 Low efficiency, low volatility silicone surfactant for high density HR TDI and MDI systems. AK-7333 General purpose HR slab silicone, low volatility AK-7330 High efficiency HR slab silicone for extra stability

Cell Size(Very Fine, Fine, Medium Emulsification(High, Medium, Low) Foam Flow ability(high, Medium, Low) Improve Dimensional Stability Iso Compatible(Capped Surfactant) General Purpose 141b Appliance Pentane Appliance HFC Appliance 141b Lamination Pentane Lamination HFC Lamination All water blowing agent Block Foam Spray /packing One Component Foam (1K) PIR PU RIGID FOAM Performance Character Application Suggestion Product type Product Description AK-8801 M M M suitable for HCFC-141b system AK-8802 F M H AK-8803 V M H Suitable for cyclopentane system. with good emulsifying property and nucleation, has high cost performance suitable for cyclopentane and HCFC-141b system, with good nucleation and fluidity AK-8804 M H Excellent FR properties. AK-8805 V M H AK-8806 M H M Very wide application filed. Suitable for HCFC-141b, cyclopentane and water systems. used for polyester polyurethane rigid foam plastic, will make polyester have good compatibility with other mixed

components, no layer for long storage AK-8808 V H H AK-8809 V H H AK-8810 M H H AK-8811 M H M AK-8812 V L H AK-8818 M H H AK-8825 F M H AK-8830 V L H AK-8832 V M H suitable for HFC-365/227 system, foam has low thermal conductivity suitable for HFC-245fa system, foam has good synthetical performance suitable for iso-cyclopentane, with good nucleation and fluidity suitable for HCFC-141b system, foam has good synthetical performance suitable for HCFC-141b system, strong nucleation bring foam low thermal conductivity Suitable for all water and pentane system, with good emulsifying property and good effect to remove surface voids suitable for iso-cyclopentane, with good nucleation and fluidity Has good synthetical characters, suitable for pentane blowing agent to produce foam with low thermal conductivity and superior adhesive strength suitable for 141b system, with good nucleation and fluidity, foam has uniform density distribution AK-8839A M M M Suitable for packaging materials. AK-8872 M L M AK-8882 F H H AK-8889 V M H suitable for one component adhesive manufacture with stronger nucleation to obtain very fine cellular structure and high amount of closed cells, bring foam low thermal conductivity and enhance thermal insulation Reduce surface voids and make foam products have good synthetical performs

Cell open ability low Cell open ability medium Cell open ability strong Polyether Based Systems Polyester Based Systems High Density Low Density Fine cell Structure Improved Dimensional Stability Improved Surface Appearance PU - ELASTOMER Product Type Product Description AK-8804 AK-8840 AK-8841 General Purpose for shoe sole manufacture Surfactant providing excellent cell structure and improved surface appearance in low density systems. Surfactant providing excellent dimensional stability in low density systems. OPENER FOR PU - RIGID FOAM Product Type Product Description AK-9901 used in the production of rigid polyurethane foams, cell opened ability low AK-9903 used in the production of rigid polyurethane foams, cell opened ability high AK-9905 used in the production of rigid polyurethane foams, cell opened ability middle

CROSS LINKERS ( PU CASE ) Product CAS number Description Main Application MOCA HR 101-14-4 MOCA MS 101-14-4 4,4 Methylene bis (2- chloroaniline) GRANULES - PELLETS 4,4 Methylene bis (2- chloroaniline) MICROSPHERE Curing and crosslinking agent for elastomer. Curing and crosslinking agent for elastomer. ETA 100 68479-98-1 Diethyltoluenediamine (DETDA) Misture of : 3,5 diethytoluene-2,4-diamine 3,5 diethytoluene-2,6-diamine Curing and crosslinking agent for elastomer, chain extender. ETA 300 106264-79-3 DI(METHYLTIO) TOLUENDIAMINE (DMTDA) Misture of : 1,2 benzenediamine,4 methyl 2,6 bis (methyl tio) 1,3 benzenediamine,2 methyl 4,6 bis (methyl tio) Curing and crosslinking agent for elastomer. Product CAS number Description Main Application 1,4 BDO 110-63-4 1-4 Butanediol Chain extender for elastomer and microcellular. Product CAS number Description Main Application D- 2000 POLYETHERAMINE Polyurea T- 5000 POLYETHERAMINE Polyurea D -230 POLYETHERAMINE Epoxy T- 403 POLYETHERAMINE Polyurea D - 400 POLYETHERAMINE Polyurea FLAME RETARDANTS ( PU Rigid - Flexible Foam ) Product CAS number Description Main Applications TCPP/TMCP 13674-84-5 Trichloropropylphosphate Flexible foams. TEP 78-40-0 Triethyl phosphate Plasticizer for tough, fire-resistant plastics.

CATALYSTS - AMINES ( PU Rigid - Flexible Foam and CASE ) Product CAS number Description Main Applications A1 23% 3033-62-3 Bis (2-Dimethylaminoethyl) ether 23 % dipropylene glycol Catalysis of the blowing reaction. A1 70% 3033-62-3 Bis (2-Dimethylaminoethyl) ether 70 % dipropylene glycol Catalysis of the blowing reaction. DEA 90-10 111-42-2 Diethanolamine 90% TEA 102-71-6 Triethanolamne 85% TEDA 33 DPG 280-57-9 TEDA 33 MEG 280-57-9 Triethylene diamine 33% (DPG ) Triethylene diamine 33% (MEG) Absorbent for acidic gases, textiles specialities, emulsifiers, cosmetics, inks, cleaners, polishes. Surface active agent, textile specialties, waxes, polishes, herbicides, petroleum demulsifier. Catalyst. Catalyst. TEDA 100 280-57-9 Triethylene diamine Multi-purpose amine catalyst, gelation catalysis. DMEA 108-01-0 Dimethylethanolamine MDEA 105-59-9 Methyldiethanolamine DMCHA 98-94-2 Dimethyl cylohexylamine DMBA 103-83-3 N,N Dimethylbenzylamine DMDEE 6425-39-4 2.2 Dimorpholinodiethylether JD 10 Triazina 15875-13-5 N,N,N -Dimethylaminopropyl hexahydro triazine Catalyst PU industry, water purification, curing agent for alkid resins, unsaturated polyester. Detergents, Treatment of acidic gases, Coatings,Textiles,Paper, Pharmaceuticals. Tertiary amine catalyst. rigid form, half-rigid form and soft form. Intermediate in organic synthesis, counteract reagent of acid, lost H catalysis and synthesize catalyst for polyurethane rigid foam. Amine blowing catalyst for one and two component rigid foam sealant systems, flexible slabstock. Catalyst PU and PIR reaction. used in spray. Named also as PC-41. DMI 80-73-9 Dimethyl-2-Imidazolidinone Catalyst PU. DMIPA 996-35-0 Dimethylisopropylamine Catalyst PU. PMDTA 3030-47-5 Pentamethyl diethylenetriamine Flexible and rigid foam plastics of polyurethane.

EPOXY RESINS STANDARD LIQUID TYPE Medium Viscosity Standard Liquid Epoxy Resin Product EEW (gr/eq) 128 184-190 Viscosity (cps at 25 c) 11500-13500 Hy-Cl (wt %) Specific Gravity *1 (20 C) Color (G ) Characteristics/use 0,5 max 1,17 0,5 max Standard Type 127 180-190 8000-11000 0,5 max 1,17 0,5 max General uses STANDARD SOLID TYPE - POWDER COATING Powder Coating Epoxy Resin Powder Coating Resin Powder Coating Resin Standard Solid Resin High Molecular Epoxy Resin Powder Coating Resin Product EEW (gr/eq) Melt Viscosity CPs 150 C Softening Point-(C) KD AS 25 Relative Density Color (G ) 012 600-700 800-1600 75-85 1,16-1,20 0,5 max 013 780-840 1500-4000 88-95 1,16-1,20 0,5 max 014 017 019 900-1000 1750-2100 2500-3800 3000-7000 91-102 1,16-1,20 0,5 max 115-125 1,16-1,20 1 max 120-150 1,16-1,20 1 max 213 730-840 3000-7000 88-98 1,16-1,20 0,5 max Characteristics/use hybrid system in combination with polyester resin or straight epoxy system. God gloss, flow, mechanical properties and chemical resistance hybrid system in combination with polyester resin or straight epoxy system. Good gloss, flow, mechanical properties and chemical resistance. hybrid system in combination with polyester resin or straight epoxy system. Good gloss, flow, mechanical properties and chemical resistance unmodified Bisphenol-A type solid Epoxy Resin designed for use in high performance, Typical uses are process equipment coating enamels, collapsible tube coatings, can coating, metal furniture finishes, and wire enamels. unmodified Bisphenol-A type solid Epoxy Resin designed for use in high performance one-package baking finishes. Typical uses include process equipment coating enamels, collapsible, tube coatings, can coating, PCM, metal furniture finishes, and wire enamels. hybrid system in combination with polyester resin or straight epoxy system.good gloss, mechanical properties and chemical resistance.

SPECIALTIES Product Description Main Application PREPOLIMER 15% NCO Prepolymer based on Diphenylmethane 4,4 diisocyanate liquid at room temperature Polyurea Spray Coating POLIOL-CAT PP Poliols Mix Polyurea Spray Coating POLIOL-CAT PI Poliols Mix Ibrid - Polyurea Spray Coating Product Description Main Application HOT and COLD PU CASTING ELASTOMERS PU system: TDI and MDI based Chain extender : MOCA and 1.4 BDO Machines: MIXER-ONE Suitable for moulding of PU - cast elastomers GREEN CHEMICALS Product Description Supplier Latex Spec Low Ammonia Latex Spec High Ammonia 60% LAL 60 % DRC concentrated Low Ammonia 60% HAL 60% DRC concentrated High Ammonia Thailand Thailand TRADING Product CAS number Description Supplier BPA 80-05-7 Bisphenol A BPF 2467-02-9 Bisphenol F Various. Used primarily to make polycarbonate plastic and epoxy resins Various Used for epoxy resins ADIPIC ACID ANHYDRIDE