W&H oral surgery Intelligent design is apparent from the detail
2 W&H Implantmed
The intelligent drive unit from W&H What does it take to make an intelligent piece of equipment like the comprehensively updated Implantmed superior to any other drive unit for dental surgical applications? Is it simplicity of operation? The remarkable number of programs? The sophisticated software? The powerful motor? The ergonomic design? It is of course all of these. But also it is the W&H brand name. Because at W&H, your requirements and those of your patients take priority. And this means that every W&H product is a well thought out piece of precision workmanship, whose intelligent design is also clearly apparent, down to the minutest detail. Implantmed the well thought out, complete solution for dental surgical work, which goes beyond basic tooth removal, and which opens up new possibilities for oral, dental and maxillofacial surgery W&H Implantmed 3
Well thought out from overall design to smallest detail The large display provides a clear overview; the status display is monochrome and easy to read. Program Treatment stage (e. g.) Instrument Factory setting Adjustment range Factory setting Adjustment range Speed rpm rpm Torque Ncm Ncm 1 Wisdom tooth removal or similar 1:1 35,000 300 40,000 max. 5.5 2 Pilot drilling 20:1 1,200 15 2,000 max. 3 Implant drilling 20:1 800 15 2,000 max. 4 forward Implant tapping 20:1 15 20 Ncm 5 50 Ncm Insert implant WS-75 E/KM (5 Ncm steps + WI-75 E/KM intermediate stage 32 Ncm) WI-75 LED G 4 reverse Implant tapping 20:1 30 50 Ncm 5 50 Ncm Remove implant WS-75 E/KM (5 Ncm steps + WI-75 E/KM intermediate stage 32 Ncm) WI-75 LED G 5 Endo Root canal preparation WD-79 M 2:1 E1 300 E1 6.0 function with NiTi files E2 300 E2 3.5 E3 300 E3 2.5 E4 300 E4 1.5 E5 300 E5 0.7 Endo function for root canal preparation. A corresponding W&H Endo contra-angle handpiece is available as an accessory. Implantmed is available in either blue or green. Its elegant and smooth design is both stylish and easy to clean. 4 W&H Implantmed
Very short and correspondingly light The Implantmed motor is quiet-running and fully sterilizable. The associated motor holder can be secured to the stand. Implantmed foot control with program switching, on and off switching of the coolant pump, clockwise/anticlockwise running, on/off function and smoothly variable motor control up to the preselected maximum speed. W&H Implantmed 5
Top quality Of course, the Implantmed already offers familiar features: for example the torque limitation for dental implantations (5 50 Ncm). And the wide speed range of 300 40,000 rpm. And a maintenance-free motor. And the integrated coolant pump. And of course with the Implantmed you have a product that not only meets but exceeds all quality requirements. Therefore we offer a 12 month warranty. Hygiene and maintenance Motor, cable, stand and handpiece holder can be sterilized at 135 C. The motor, cable and instruments can be stored, protected and sterilized in an optionally available sterilization cassette. The foot control and the Implantmed case can be disinfected with standard solutions. Data Matrix Code Read with appropriate equipment for simple product identification and traceability, for example within hygienic maintenance routines. Standardized and tested Naturally, the Implantmed complies with the European directives for Class IIa medical products. In addition, foot control and motor are AP-tested. As a result they can be used in operating theatres where this test is essential for their use in Zone M areas. Suitable for operating theatres Implantmed complies with all relevant standards and directives for use in an operating theatre: > IEC 60601-1 safety standards > EMC-tested > AP-tested > CE 0297 6 W&H Implantmed
Perfect results Specially matching straight and contra-angle handpieces for perfect treatment results. Specifically recommended as accessories for the Implantmed: WS-75 E/KM Surgical contra-angle handpiece 20:1 Removable spray clip. Can be completely dismantled for comprehensive hygiene. Indication: implantations, segment osteotomies WI-75 LED G with LED and generator WI-75 E/KM Implantology contra-angle handpiece 20:1 Removable spray clip. Indication: implantations WD-79 M The perfect contra-angle handpiece 2:1 from the Endo NiTi series for mechanical root canal preparation Revolution starts in the head With the patent pending hexagon chucking system, W&H is again establishing its leading role in innovative, customer-orientated solutions. Get the new standard: with the 20:1 surgical contra-angle handpiece WS-75 E/KM or the 20:1 implantology contra-angle handpieces WI-75 E/KM or WI-75 LED G. > Application safety at high torques > No deformation or jamming of rotary instruments at torques above 30 Ncm > Transmission of torques to well above 100 Ncm possible > Longer life of rotary instruments and contra-angle handpiece > Future-proof solution > Existing burs and rotary instruments can continue to be used W&H Implantmed 7
Technical data Type: Supply voltage: Max. output power / Torque at the motor: Motor speed: Motor cable: Intended straight and contra-angle handpieces: Coolant flow: Height / width / depth: Weight complete: SI-923 220 240 V, 50 / 60 Hz 70 W / 5.5 Ncm 300 40,000 rpm 1.8 m Reduction 1:1, 20:1 (exclusively with WI-75 E/KM, WI-75 LED G or WS-75 E/KM) ISO connection 3964 (DIN 13.940), Program 5 WD-79 M approx. 100 ml / min 90 x 252 x 254 mm 3.30 kg Implantmed accessories 1 Transportation case ST-K 29 for transport of unit and accessories to other locations 2 Sterilization cassette with appropriate compartments for motor, cable, straight and contra-angle handpieces 3 Step wedge increases the slope of the foot control by 4 degrees 1 4 4 Practical mobile treatment trolley with shelves 2 3 Pictures are for illustrative purposes only. Additional equipment and accessories are not included with the item. W&H Dentalwerk Bürmoos GmbH Ignaz-Glaser-Straße 53, Postfach 1 5111 Bürmoos, Austria Order your Implantmed through your dental supplier. t +43 (0) 6274 6236-0 f +43 (0) 6274 6236-55 office@wh.com wh.com ISO 13485 93/42/EEC Annex II 20276 AEN Rev. 006 / 16.01.2008 Subject to alterations