MATERIAL SAFETY DATA SHEET SECTION 1. PRODUCT & COMPANY INFORMATION Brand Name : MetaClaw DS Product Name : Ethylene Di Amine Tetra - Acetic Acid Di Sodium CAS No. : 6381-92-6 Supplier : Satyajit Chemicals Pvt Ltd. 306, Devavrata, Sector- 17, Vashi, Navi Mumbai 400703. INDIA Tel:+91-22-61331900 Fax:+91-22-61331999 Email: info@satyajitchemicals.com Date of issue/last Rev : 01/01/2011 SECTION 2. PHYSICAL PROPERTIES Physical form Odour : Powder : Odourless SECTION 3. CHEMICAL PROPERTIES ph 1% solution : 4.0 to 5.0 Assay as EDTA 2Na : 99% min. Chelation value : 270 mg/gm of CaCO3
SECTION 4. STABILITY & REACTIVITY Boiling point Melting point Stability Hazardous Decomposition Product Hazardous Polymerization Incompatibilities Conditions to Avoid : Not available : Not available : Stable under ordinary conditions of use and storage. : Carbon dioxide and carbon monoxide may form when heated to decomposition. : Will not occur. : Strong oxidizers, strong acids and bases. : Heat and high temperatures. SECTION 5. HEALTH HAZARDS IDENTIFICATION Inhalation Ingestion Skin Contact Eye Contact Chronic Exposure : Causes irritation to the respiratory tract. Symptoms may include coughing, shortness of breath. : Large oral doses may cause irritation to the gastrointestinal tract. : Causes irritation to skin. Symptoms include redness, itching, and pain. : Causes irritation, redness, and pain. : None. Section 6. FIRST AID MEASURES Inhalation Ingestion Skin Contact Eye Contact : Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention. : Induce vomiting immediately as directed by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention. : Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse. : Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
Section 7. FIRE FIGHTING MEASURES Fire Explosion Fire Extinguishing Media : As with most organic solids, fire is possible at elevated temperatures or by contact with an ignition source. : Fine dust dispersed in air in sufficient concentrations, and in the presence of an ignition source is a potential dust explosion hazard. Water spray, dry chemical, foam, or carbon dioxide. Section 8. ACCIDENTAL RELEASE MEASURES Vacuum or wet sweeping may be used. Section 9. EXPOSURE CONTROLS/PERSONAL PROTECTION Air borne exposure limits Ventilation System Skin Protection Eye Protection : Not established. : A system of local and / or general exhaust is recommended. : Wear impervious protective clothing, including boots, gloves, lab-coat, apron or coveralls as appropriate to prevent skin contact. : Use chemical safety goggles, maintain eye wash fountain and quick drench facilities in work area.
Section 10. HANDLING & STORAGE Store in a cool dry place. Protect against physical damage. Wear face mask to protect from dust. Use chemical safety goggles. Avoid Incompatibles. Section 11. TOXICOLOGICAL INFORMATION Acute Effects Chronic Effects Carcinogenecity Section 12. ECOLOGICAL INFORMATION Environmental Fate Environmental Toxicity Section 13. DISPOSAL CONSIDERATIONS Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing use or contamination of this product may change the waste management options. State and local disposal regulations may differ from Federal disposal regulations. Dispose of container and unused contents in accordance with Federal, State and local requirements. Section 14. TRANSPORT REGULATIONS Not regulated.
Section 15. REGULATORY INFORMATION Not applicable Section 16. OTHER INFORMATION Information contained in this MSDS is believed to be reliable but no representation guarantee or warranties of any kind are made as to its accuracy, suitability for a particular application or results to be obtained from them. The user of this material should decide what safety measures are necessary to safely use this material either alone or in combination with other materials. Satyajit Chemicals Pvt Ltd, makes no warranties expressed or implied in respect of the adequacy of this document for any particular purpose. (Authorized Signatory)