Restorative Solutions Easier gets better Raising the bar for posterior fillings
Posterior Restorations made simple! True simplification involves excellent handling properties while eliminating complicated workflows, additional layers and multiple steps, all without compromising wear resistance or stress relief. is your one-step placement posterior composite solution designed to improve productivity by allowing fast and easy restorations. Excellent handling and sculptability One-step placement up to 5 mm Excellent adaptation Excellent wear resistance Stress relief High radiopacity NEW UNIQUE CAPSULE DESIGN BETTER ACCESS to deep cavities FLEXIBLE CAPSULE TIP allows BETTER ADAPTATION especially in hard to reach areas Excellent polish retention
150 European Dentists were asked to test stands out 3M ESPE Internal Data. Average placement time vs. incremental composites in a simulated operatory. Feedback:** * vs. incrementally placed composite ** 3M ESPE internal data. Data available on request at 3M ESPE. Contact see back side. without AFM During light cure: stress stress with AFM AFM-molecules stress AFM RELIEVES STRESS without compromising wear resistance. Filtek Bulk Fill uses the same TRUE nanofiller technology that s been time-proven by other leading Filtek restorative products. Not only does this technology contribute to high strength, excellent handling and better wear resistance, but also to restorations that are fast and easy to polish. In addition to this TRUE nanofiller technology, Filtek Bulk Fill also contains two innovative methacrylate monomers that, in combination, act to lower polymerization stress, without compromising wear. The combination of these two technologies results in an easy-to-use, one-step placement, restorative material designed to simplify your posterior restorations. After polymerization Excellent handling for adaptation and sculptability. EASY AND FAST POLISH + EXCELLENT POLISH RETENTION Filtek Bulk Fill Posterior SonicFill TetricEvoCeram Bulk Fill After 6,000 tooth brushing cycles (3M ESPE internal laboratory testing). Alert Quixx X-tra fil
Designed to improve productivity from start to finish 1 2 3 Sof-Lex 4 Scotchbond Universal Adhesive Versatile, high bond strength and virtually no post-operative sensitivity. Simplicity of bulk placement up to 5 mm deep, low wear for durability and stress relief. Elipar S10 LED Curing Light Fast, deep cure and a unique ergonomic design. Spiral Finishing and Polishing Wheels Easily adapts to irregular, convex and concave tooth surfaces, for fast and easy finishing and polishing.
Simplify your day and reduce chair time with faster, easier posterior restorations
Flowable Restorative If you are looking for a bulk fill flowable, our award-winning 1 Flowable Restorative should be your first choice. It is up to 50% stronger than the leading bulk fill flowable 2 and offers over 3 the wear resistance 2. Excellent for use as 3 : a liner for Class I and Class II restorations a fast bulk fill base up to 4 mm for Class I and Class II restorations as a wear-resistant solution for small, non-stress-bearing occlusal surfaces, Class III and Class V 1. Dental Barometer Testphase 05/2014 and Zahnmedizin Report 06/2014 five-star rating 2. Compared to SureFil SDR flow. 3M ESPE in vitro data on file 3. Refer to Instructions for Use for complete list of indications Ordering Information Item No. Product Information 4864TK Capsule Procedure Kit Kit includes: 40 0.2g capsules: 20 each of A2 and A3; 5.0 ml vial Scotchbond Universal Adhesive; Instructions for Use; 10 Sof-Lex Spiral Finishing Wheels; 10 Sof-Lex Spiral Polishing Wheels; 1 RA Mandrel; Technique Guide; Instructions for Use 4863TK Syringe Procedure Kit Kit includes: 2 4g syringes: 1 each of A2 and A3; 5.0 ml vial Scotchbond Universal Adhesive; Instructions for Use; 10 Sof-Lex Spiral Finishing Wheels; 10 Sof-Lex Spiral Polishing Wheels; 1 RA Mandrel; Technique Guide; Instructions for Use Refills SHADE SYRINGE CAPSULE A1 4863A1 4864A1 A2 4863A2 4864A2 A3 4863A3 4864A3 B1 4863B1 4864B1 C2 4863C2 4864C2 SYRINGE SHADE REFILLS include 1 4g syringe; CAPSULE SHADE REFILLS include 20 0.2g capsules; Refill Shade A1 (4864A1) Capsule Procedure Kit (4864TK) Flowable Restorative Refills SHADE SYRINGE CAPSULE A1 4862A1 4861A1 A2 4862A2 4861A2 A3 4862A3 4861A3 Universal 4862U 4861U Item No. Product Information 3740T Dispensing Tips 20 19-gauge dispensing tips SYRINGE SHADE REFILLS include 2 2g syringes; 20 dispensing tips; CAPSULE SHADE REFILLS include 15 0.2g capsules; 3M Deutschland GmbH Location Seefeld 3M ESPE ESPE Platz 82229 Seefeld Germany info3mespe@mmm.com www.3mespe.com www.3mespe.com/filtek 3M, ESPE, Elipar, Filtek, Scotchbond and Sof-Lex are trademarks of 3M Company or 3M Deutschland GmbH. Used under licence in Canada. All other trademarks are owned by other companies. 2014, 3M. All rights reserved. XX (0X.2014)