DENKA EVA TEX DENKA EVA TEX / Composition Composition types are also available for DENKA EVA TEX and provide better performance and workability than basic types. Typical Composition Grades Grade NA410 NA500 NA610 NA630 83PLD Typical Application & Characteristics Adhesive for Plastic Film Overlaid Plywood, Low Viscosity Adhesive for Plastic Film Overlaid Plywood, Medium Viscosity Adhesive for Plastic Film Overlaid Plywood, High Viscosity Adhesive for Plastic Film Overlaid Plywood, Medium Viscosity, Heat Resistance Mortar Reinforcing Agent (Comply with JIS A 6203) Solid Content (w%) Emulsion Properties Viscosity ** (mpa s) ph 46 52 1,500 2,500 *1 4.5 6.5 54 59 15,000 21,000 *2 4.5 6.5 53 58 35,000 45,000 *1 4.5 6.5 52 57 15,000 21,000 *2 4.5 6.5 45 48 800 1,200 4.5 6.5 DENKA EVA TEX Vinyl Acetate Ethylene Copolymer Emulsion NPS2 Anti-Flow Agent for Coal 38 41 - - * 4 VOCs: Toluene, Xylene, Ethylbenzene and Styrene ** Viscosity: BM type Viscometer, 30 rpm 30 *1 : BH type 10 rpm 23, *2 : 12 rpm 23 Notes about the information contained in this catalog The information contained in this catalog is based on typical test values and investigation results, and is not in any way guaranteed by DENKA. Before using any of the products described in this catalog, customers should test them to determine whether they suit the customer's purpose of use and to ensure safety. The DENKA products described in this catalog and any products in which they are incorporated must be disposed of in compliance with all applicable lows and regulations. Before using any of the products described in this catalog, obtain and check the applicable technical information and product safety data sheet for information and precautions on the use of these products. These documents can be obtained from DENKA upon request. Please note that the content described in this catalog may be modified without notice based on new information. Cautions DENKA EVA TEX must be stored at the temperature from 5 to 40 degrees C. Please guard from direct sunlight and high temperatures, but also from frost in the winter. Denki Kagaku Kogyo Kabushiki Kaisha Styrene & Acetyl Chemicals Department DENKA Corporation DENKA Chemicals GmbH
DENKA EVA TEX DENKA EVA TEX / Basic Grades <Systematic Chart> DENKA EVA TEX is copolymer emulsion of vinyl acetate and ethylene developed by DENKA's own technology. DENKA EVA TEX has good adhesion properties with a variety of materials including wood, paper, concrete and plastics. As a result, DENKA EVA TEX can be widely used in a variety of fields. 80 81 82 60 170 65 135 75 55N 59 50 50S 100 90 77H 70 Typical Basic Grades Applications Emulsion Properties Film Properties Grade Characteristics Adhesive Civil Engineering Paint Electric Charge Solid Content (w%) Viscosity (mpa s) ph MFT ( ) Tg ( ) Tensile Strength (MPa) Elong-ation (%) Grade 50 General Purpose, Low Viscosity Nonionic 54 56 1,500 3,000 4.5 6.0 0 0 5.0 850 50 50S General Purpose, Low Viscosity Nonionic 54 56 1,100 1,600 *1 4.0 7.0 0 0 5.0 850 50S 55N Medium-High Ethylene Nonionic 54 56 1,000 5,000 4.5 6.0 <0-10 2.5 1,300 55N 59 High Ethylene, Good Plastic Adhesion Nonionic 55 57 800 3,000 4.5 6.5 <0-18 2.5 1,300 59 60 General Purpose, Adhesive Use Nonionic 55 57 3,700 5,000 4.5 6.0 0 0 4.5 800 60 65 High Solid Content & Initial Strength Nonionic 65 66 3,000 7,000 4.5 6.0 0 0 4.0 850 65 70 Medium Viscosity, Good Cold Adhesion Nonionic 55 57 2,000 5,000 4.5 6.0 0 0 3.0 900 70 75 Medium-High Ethylene Nonionic 55 59 2,000 6,000 4.5 6.5 <0-12 3.0 1,300 75 77H Paper Adhesion, Good Application Properties Nonionic 54 58 1,500 3,500 *2 4.5 6.0 0-5 4.0 1,100 77H 80 High Viscosity Nonionic 55 59 24,000 35,000 *3 4.5 6.0 0 0 5.0 1,000 80 81 High Viscosity Nonionic 55 57 10,000 15,000 4.5 6.0 0 0 5.0 1,000 81 82 Good Adhesion to Porous Material & PVC Nonionic 55 57 6,000 10,000 4.5 6.0 0 0 5.0 1,000 82 90 Mortar Admixture, Good Alkali Resistance Nonionic 55 57 3,000 5,000 4.5 6.5 0 1 7.0 700 90 100 Good Mixibility with Filler, Adhesive Use Nonionic 54 56 1,000 2,000 4.5 6.5 0-3 6.5 800 100 135 Medium-High Ethylene, High Viscosity Nonionic 58 62 10,000 20,000 *2 4.5 6.5 <0-12 2.5 1,300 135 170 High Solid Content & Initial Strength Nonionic 69 71 500 4,000 4.5 6.5 0 0 5.0 1,000 170 Viscosity : BM-type Viscometer, 30 rpm 30 *1 : 60 rpm 25, *2 : 12 rpm 23, *3 : 12 rpm 30 Mean Particle Diameter : Laser Diffractometry