SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SHERWIN-WILLIAMS AUTOMOTIVE FINISHES CORP. Testing Laboratory 4440 Warrensville Center Road Warrensville Heights, OH 44128 David Allerton Phone: 216 332 8379 MECHANICAL Valid To: April 30, 2019 Certificate Number: 1176.01 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following tests on paints: Test Description: Abrasion / Scuff / Wear Resistance ASTM D4060; FLTM BN 108-02, FLTM BN 108-04; GMW 3208; SAE J365, SAE J948; Toyota TSH3130G (4.14); GMW 14125 (Appendix K) Accelerated Artificial Weathering ASTM G151, ASTM G154, ASTM G155, ASTM D4587; FLTM BO 101-01, FLTM BO 116-01; GM9125P (Inactive 2013) 1 ; SAE J1885 (Inactive 2008) 1, SAE J1960 (Inactive 2008) 1, SAE J2020, SAE J2527, SAE J2412; Toyota TSH 3130 (4.17) Adhesion ASTM D3359; FLTM BI 106-01, FLTM BI 106-02; GMW 14829; ISO 2409; JIS D0202; John Deere JDH 612; Navistar GT-5A, Navistar GT-5C; Toyota TSH 1503G; Volvo STD 1029-5472; Appearance Evaluation ASTM D714, ASTM D1654, ASTM D610; ISO 4628-2, ISO 4628-1; Volvo STD 1027-051 Brittleness Evaluation Freightliner 49-00023; GM9506P (Inactive 2013) 1 (A2LA Cert. No 1176.01) 07/20/2017 Page 1 of 4
Chemical Resistance / Spot Tests ASTM D1308, ASTM D5402, ASTM D4752; Chrysler: LP-463KC-21-01, LP-463PB-31-01; Ford: FLTM BI 113-01, FLTM BI 113-02, FLTM BI 113-06, FLTM BI 113-07, FLTM BI 113-08, FLTM BI 152-01, FLTM BO 101-05; Ford: WSS-M15J14-A (3.5.13), WSS-M99J385-A (3.7.16), WSSM-M15J15-A (3.5.13), WSSM-M15J16-A (3.5.13), WSSM2P188-A (3.4.14); GM9240P (Inactive 2013) 1, GM9500P (Inactive 2010) 1, GM9501P (Inactive 2010) 1, GM9517P (Inactive 2012) 1, GM9736P (Inactive 2011) 1, GMN10033 (Inactive 2011) 1 ; GMW 14333, GMW 14701, GMW 14864, GMW 15516 (Effect of Cleaners), GMW 15520 (Effect of Cleaners), GMW 14445, GMW 14334, GMW 15891; ISO 2812-1; Mack Truck 617GS120; Navistar CEMS GT-14A; Paccar CS0033 (9.23.2); Toyota: TSH1509G, TSH3130G, TSH1508G (2.1.1 and 2.1.2); Volvo STD 1026-8177 Chip Resistance (Gravelometer) ASTM D3170; GMW 14700 (Methods B and C); SAE J400; Volvo STD 1024-7132 Conductivity / ph ASTM E70; Navistar GT-18; Paccar CS0033 (9.24) Crockmeter Evaluation FLTM BN 108-10, FLTM BN 107-01; ISO 20433; SAE J861 Environmental Cycles Chrysler LP-463PB-22-01; FLTM BQ 104-07; Ford: WSS-M15J14-A (3.5.7), WSS-M15J15-A (3.5.7), WSS-M15J16-A (3.5.7), WSS-M2P188-A (3.4.8), WSS-M99J385-A (3.7.7); GMW 14124; Volvo STD 1027-3375 Evaluation of Color Differences ASTM D2244; ISO 7724/3, 2, 1; JIS L0805 (A2LA Cert. No 1176.01) 07/20/2017 Page 2 of 4
Flexibility Resistance (Mandrel) ASTM D522; Ford WSS-M15J15-A (3.5.20); GM9503P; ISO 6860; Toyota TSH 1504G Fogging Resistance GMW 3235; SAE J1756; Toyota TSM 0503G Gloss ASTM D523; FLTM BI 110-01; ISO 2813; JIS Z8741; Navistar CEMS GT-6B; Toyota TSH1519G; Volvo STD 1026-5272 Hardness Evaluation ASTM D3363; FLTM BN 108-13; GM9507P (Inactive 2011) 1 ; LP-463-DD-18-01; Navistar CEMS GT-4D; Toyota TSH 1539G Impact Resistance ASTM D2794, ASTM D3763 (-30 C to 0 C), ASTM D5420; FLTM BO 117-02; ISO 6272-2; Toyota TSH 1504G (2.1) Mar Resistance Chrysler LP-463PB-54-01; FLTM BI 161-01; GMN3943; GMW 14698; Navistar GT-12 Measurement of Dry Film Thickness ASTM D4138 (Method B) Migration Staining / Print Resistance / Soiling & Cleanability FLTM BN 103-01, FLTM BN 112-08; GM9141P; Toyota TSH 3111G, Toyota TSH 1501G (2.1) Odor Evaluation / Mildew Growth FLTM BO 131-01, FLTM BO 131-03; GMW 3205; SAE J1351 (A2LA Cert. No 1176.01) 07/20/2017 Page 3 of 4
Oven Aging / Heat Resistance GMW 15516 (Oven Age), GMW 15520 (Oven Age); Ford: WSS-M15J14-A (3.5.6), WSS-M15J15-A (3.5.6), WSSM-M15J16-A (3.5.6), WSS-M2P188-A (3.7), WSS-M99J385-A (3.7.6) Salt Fog (Spray) / Corrosion ASTM B117, ASTM G1; FLTM BI 103-01, FLTM BI 123-01; GM4298P; SAE J2334 Water Fog / Humidity / Condensation Exposure ASTM D1735, ASTM D2247, ASTM D4585; GMW 14729; Navistar CEMS GT-7E; Toyota TSH 3130G (4.7) Water Immersion ASTM D870; FLTM BI 104-01; ISO 2812-2; Navistar CEMS GT-7G; Toyota TSH1505G The laboratory is only accredited for the test methods listed above. The accredited test methods are used in determining compliance with the material specifications listed below. The inclusion of these material specifications on this Scope does not confer laboratory accreditation to the material specifications nor does it confer accreditation for the method(s) embedded within the specifications: Material Specifications Ford: WSS-M15J14-A, WSS-M15J15-A, WSS-M15J16-A, WSS-M2P188-A; Freightliner 49-00087, 49-00023; GMW14867; Mack Truck 617GS120; Toyota TSH 3130G 1 This laboratory s Scope contains inactive, withdrawn or superseded methods. As a clarifier, this indicates that the applicable method itself has been withdrawn or is now considered historical and not that the laboratory s accreditation for the method has been withdrawn. (A2LA Cert. No 1176.01) 07/20/2017 Page 4 of 4
Accredited Laboratory A2LA has accredited SHERWIN-WILLIAMS AUTOMOTIVE FINISHES CORP. Warrensville Heights, OH for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Presented this 25 th day of May 2017. President and CEO For the Accreditation Council Certificate Number 1176.01 Valid to April 30, 2019 For the tests to which this accreditation applies, please refer to the laboratory s Mechanical Scope of Accreditation.