Pages: Page 1 of 10 SAMPLE INFORMATION: Description: Two-Way Traveler's Tumbler Assortment: Clear, Translucent Aqua, Purchase Order Number: R01447-1 Translucent Lime Green, Translucent Orange Item No.: PL-4073 Vendor: CDI International Prime Report PO No.: A27219, A26728, A26489 Country of Origin: China Country of Distribution: - Labeled Age Grade: - Quantity Submitted: 3 pcs per style Recommended Age Grade: - Testing Period: 04/27/2015 05/06/2015 Tested Age Grade: - OVERALL RESULT: At the request of the client, the following tests were conducted: CONCLUSION TEST(S) CONDUCTED CPSIA Section 101, Total Lead in Substrate Materials California Proposition 65, Total Lead in Substrate Materials FDA 21 CFR 177.1210, Closures with Sealing Gaskets for Food Containers # FDA 21 CFR 177.1520, Polypropylene Copolymers (Food Simulating Solvents Extraction Only) FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Styrene Copolymers ANSECO GROUP (HK) LIMITED Vincent Chow Wai Kit Manager, Chemical Laboratory
Pages: Page 2 of 10 CPSIA Section 101, Total Lead in Substrate Materials Analysis performed by Inductively Coupled Plasma-Optical Emission Spectrometry to determine compliance with the above referenced regulation. [Referenced Test Method: CPSC-CH-E1001-08.2 (Metal) and/or CPSC-CH-E1002-08.2 (Non-Metal)] Specimen No. 1+2+3 5 6+7+8 9+10+11 12+13 Limit Total Total Pb ND ND ND ND ND 100 Specimen No. 14 15 --- --- --- Limit Total Total Pb ND ND --- --- --- 100 --- --- --- Pb = Lead ppm (Parts per million) = mg/kg (Milligrams per kilogram) ND = Not detected (Reporting Limit = 20ppm) Composite results are based on specimen of least mass resulting in highest potential concentration.
Pages: Page 3 of 10 California Proposition 65, Total Lead in Substrate Materials Analysis performed by Inductively Coupled Plasma-Optical Emission Spectrometry to determine compliance with the above referenced regulation. [Referenced Test Method: CPSC-CH-E1001-08.2 (Metal) and/or CPSC- CH-E1002-08.2 (Non-Metal)] Specimen No. 1+2+3 5 6+7+8 9+10+11 12+13 Limit Total Total Pb ND ND ND ND ND 100 Specimen No. 14 15 --- --- --- Limit Total Total Pb ND ND --- --- --- 100 --- --- --- Pb = Lead ppm (Parts per million) = mg/kg (Milligrams per kilogram) ND = Not detected (Reporting Limit = 20ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. The specification is quoted from client s requirement.
Pages: Page 4 of 10 FDA 21 CFR 177.1210, Closures with Sealing Gaskets for Food Containers Analysis performed by food simulating solvents extractions to determine compliance with above referenced regulation. [Referenced Test Method: FDA 21 CFR 177.1210 # ] Specimen No. 14 RL Specification Distilled water extractive Fill boiling, cool to 100 F 60 minutes ND 10 50 Distilled water extractive Specimen No. 15 F = Degree Fahrenheit ppm (Parts per million) = mg/kg (Milligrams per kilogram) ND = Not detected. value is less than reporting limit (RL). The specification is quoted from 21 CFR 177.1210 Table 2 Section 2. RL Specification Fill boiling, 2 hours 38 10 50 cool to 100 F
Pages: Page 5 of 10 FDA 21 CFR 177.1520, Polypropylene Copolymers (Food Simulating Solvents Extraction Only) Analysis performed by food simulating solvents extractions to determine compliance with above referenced regulation. [Referenced Test Method: FDA 21 CFR 177.1520] Specimen No. 10 RL Specification n-hexane extractive (% w/w) 50 o C 2 hours ND 0.4 5.5 Xylene extractive (% w/w) 25 o C 1 hour 20.1 1 30 Specimen No. 11 RL Specification n-hexane extractive (% w/w) 50 o C 2 hours ND 0.4 5.5 Xylene extractive (% w/w) 25 o C 1 hour 18.5 1 30 C = Degree Celsius g/cc = Grams per cubic centimeter % w/w = Percent by weight NA = Not applicable ND = Not detected. value is less than reporting limit (RL). The specification is quoted from 21 CFR 177.1520 (c) 3.1a.
Pages: Page 6 of 10 FDA 21 CFR 177.1520, Polypropylene Copolymers (Food Simulating Solvents Extraction Only) Analysis performed by food simulating solvents extractions to determine compliance with above referenced regulation. [Referenced Test Method: FDA 21 CFR 177.1520] Specimen No. 12 RL Specification n-hexane extractive (% w/w) 50 o C 2 hours ND 0.4 5.5 Xylene extractive (% w/w) 25 o C 1 hour 22.0 1 30 Specimen No. 13 RL Specification n-hexane extractive (% w/w) 50 o C 2 hours ND 0.4 5.5 Xylene extractive (% w/w) 25 o C 1 hour 16.1 1 30 C = Degree Celsius g/cc = Grams per cubic centimeter % w/w = Percent by weight NA = Not applicable ND = Not detected. value is less than reporting limit (RL). The specification is quoted from 21 CFR 177.1520 (c) 3.1a.
Pages: Page 7 of 10 FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Styrene Copolymers Analysis performed by food simulating solvents extractions and Headspace-Gas Chromatography/Mass Spectrometry to determine compliance with above referenced regulation. [Referenced Test Method: FDA 21 CFR 180.22 and 181.32] Acrylonitrile Monomers: Specimen No. 1 RL Specification Distilled water extractive (mg/in 2 ) 120 o F 2 Hours ND 0.001 0.003 3% Acetic acid extractive (mg/in 2 ) 120 o F 2 Hours ND 0.001 0.003 Specimen No. 2 RL Specification Distilled water extractive (mg/in 2 ) 120 o F 2 Hours ND 0.001 0.003 3% Acetic acid extractive (mg/in 2 ) 120 o F 2 Hours ND 0.001 0.003 F = Degree Fahrenheit mg/in 2 = Milligrams per square inch ND = Not detected. value is less than reporting limit (RL). The specification is quoted from 21 CFR 181.32 (b) (3).
Pages: Page 8 of 10 FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Styrene Copolymers Analysis performed by food simulating solvents extractions and Headspace-Gas Chromatography/Mass Spectrometry to determine compliance with above referenced regulation. [Referenced Test Method: FDA 21 CFR 180.22 and 181.32] Acrylonitrile Monomers: Specimen No. 3 RL Specification Distilled water extractive (mg/in 2 ) 120 o F 2 Hours ND 0.001 0.003 3% Acetic acid extractive (mg/in 2 ) 120 o F 2 Hours ND 0.001 0.003 Specimen No. 4 RL Specification Distilled water extractive (mg/in 2 ) 120 o F 2 Hours ND 0.001 0.003 3% Acetic acid extractive (mg/in 2 ) 120 o F 2 Hours ND 0.001 0.003 F = Degree Fahrenheit mg/in 2 = Milligrams per square inch ND = Not detected. value is less than reporting limit (RL). The specification is quoted from 21 CFR 181.32 (b) (3).
Pages: Page 9 of 10 SPECIMEN DESCRIPTION: Specimen No. Specimen Description Location 1 Translucent blue plastic (AS) Inner wall/ lid (translucent aqua style) 2 Translucent green plastic (AS) Inner wall/ lid (translucent lime green style) 3 Translucent orange plastic (AS) Inner wall/ lid (translucent orange style) 4 Clear plastic (AS) Inner wall/ lid (clear style) 5 Clear plastic Inner wall/ lid (clear style); outer wall (all styles) 6 White plastic Flip top (clear style) 7 Blue plastic Flip top (translucent aqua style) 8 Green plastic Flip top (translucent lime green style) 9 Orange plastic Flip top (translucent orange style) 10 Clear plastic (PP-co) Straw (clear style) 11 Transparent blue plastic (PP-co) Straw (translucent aqua style) 12 Transparent green plastic (PP-co) Straw (translucent lime green style) 13 Transparent orange plastic (PP-co) Straw (translucent orange style) 14 Black soft plastic Gasket of flip top (all styles) 15 Translucent soft plastic Gasket of lid (all styles)
Pages: Page 10 of 10 SAMPLE PHOTO: -End Report-