Compact Distal Radius System. Consolidated solution for Distal Radius Plating Systems Designed to allow customized system configurations Variable Angle (VA) and Locking Compression Plate (LCP ) options available Layout of instrumentation is focused on order of use Instruments and implants approved by the AO Foundation
Variable Angle Compact Distal Radius Instrument and Implant Set Stainless Steel (01.119.050) and Titanium (01.119.053) Graphic Case 60.119.050 Graphic Case 60.119.012 Variable Angle Implant Rack Instruments 03.110.000 1.8 mm Universal Variable Angle Locking Drill Guide 03.110.005 Handle, for torque limiting attachment 03.110.021 1.8 mm Drill Guide with measuring, for guide block, 2 ea. 03.111.005 Depth Gauge, for 2.0 mm, 2.4 mm and 2.7 mm screws Guide Blocks, for two-column plate 03.111.600 6 hole head, right 03.111.601 6 hole head, left 03.111.700 7 hole head, right 03.111.701 7 hole head, left 292.12 1.25 mm Kirschner Wire, 150 mm, trocar point (10/pkg.) 292.16 1.6 mm Kirschner Wire, 150 mm, trocar point, (10/pkg.) 310.21 2.0 mm Drill Bit, quick coupling, 125 mm, 2 ea. 310.509 1.8 mm Drill Bit with depth mark, quick coupling, 110 mm, 2 ea. 311.43 Handle, with quick coupling 314.453 Short StarDrive Screwdriver Shaft, T8, self-holding, quick coupling, 55 mm 314.467 StarDrive Screwdriver Shaft, T8, 105 mm 319.39 Sharp Hook 323.029 Threaded LCP Drill Guide, for LCP distal radius plates, 1.8 mm, 2 ea. 323.202 2.4 mm Universal Drill Guide 323.26 2.7 mm Universal Drill Guide 398.41 Reduction Forceps with points, broad, ratchet, 132 mm 399.18 Hohmann Retractor, 6 mm width, small, short narrow tip, 160 mm length For detailed cleaning and sterilization instructions, please refer to: www.synthes.com/cleaning-sterilization In Canada, the cleaning and sterilization instructions will be provided with the Loaner shipments. Synthes Compact Distal Radius System
399.481 Periosteal Elevator, 3 mm width, curved blade, round edge 399.49 Hohmann Retractor, for small fragments, 15 mm width, broad shank, 160 mm length 399.97 Reduction Forceps, with points, 130 mm length, ratchet 511.776 Torque Limiting Attachment, 0.8 Nm, quick coupling Implants 2.4 mm Variable Angle LCP Two-Column Volar Distal Radius Plates Head Shaft Stainless Steel Titanium Holes Holes 02.111.620 04.111.620 6 2 right 02.111.621 04.111.621 6 2 left 02.111.630 04.111.630 6 3 right 02.111.631 04.111.631 6 3 left 02.111.720 04.111.720 7 2 right 02.111.721 04.111.721 7 2 left 02.111.730 04.111.730 7 3 right 02.111.731 04.111.731 7 3 left 1.8 mm Variable Angle Locking Buttress Pins, 02.210.080 04.210.080 10 02.210.082 04.210.082 12 02.210.084 04.210.084 14 02.210.086 04.210.086 16 02.210.088 04.210.088 18 02.210.090 04.210.090 20 02.210.092 04.210.092 22 02.210.094 04.210.094 24 02.210.096 04.210.096 26 02.210.098 04.210.098 28 2.4 mm Variable Angle Locking Screws, with T8 StarDrive recess Qty. 02.210.110 04.210.110 10 5 02.210.112 04.210.112 12 5 02.210.114 04.210.114 14 10 02.210.116 04.210.116 16 10 02.210.118 04.210.118 18 10 02.210.120 04.210.120 20 10 02.210.122 04.210.122 22 10 02.210.124 04.210.124 24 5 02.210.126 04.210.126 26 5 02.210.128 04.210.128 28 5 Titanium Grade 4 * Titanium alloy (Ti-6Al-7Nb) Compact Distal Radius System Synthes 1
Variable Angle LCP (VA-LCP) Compact Distal Radius Instrument and Implant Set Stainless Steel (01.119.050) and Titanium (01.119.053) 2.4 mm Cortex Screws, self-tapping, 201.760 401.760 10 201.762 401.762 12 201.764 401.764 14 201.766 401.766 16 201.768 401.768 18 201.770 401.770 20 201.772 401.772 22 201.774 401.774 24 201.776 401.776 26 201.778 401.778 28 2.7 mm Cortex Screws, self-tapping, 202.870 402.870 10 202.872 402.872 12 202.874 402.874 14 202.876 402.876 16 202.878 402.878 18 202.880 402.880 20 202.882 402.882 22 202.884 402.884 24 202.886 402.886 26 202.888 402.888 28 Accessories Length Marker Push Pins, (5/pkg.) Length (mm) 60.116.451 Blank 60.116.310 10 60.116.312 12 60.116.314 14 60.116.316 16 60.116.318 18 60.116.320 20 60.116.322 22 60.116.324 24 60.116.326 26 60.116.328 28 Screw Type Push Pins, (5/pkg.) 60.116.507 Cortex 60.116.521 Variable Angle Locking 60.116.525 Variable Angle Buttress Label Sheets 60.116.554 Label Pack, for 2.4 mm screws and instruments 60.116.555 Label Pack, for 2.7 mm screws and instruments Note: Addition of the LCP Implant and Screw Set (01.119.017/01.119.019) upgrades sets (01.119.050) and (01.119.053) to a VA and LCP Compact Distal Radius Instrument and Implant Set. * Titanium alloy (Ti-6Al-7Nb) 2 Synthes Compact Distal Radius System
LCP Compact Distal Radius Instrument and Implant Set Stainless Steel (01.119.051) and Titanium (01.119.054) Graphic Case 60.119.050 Graphic Case 60.119.015 LCP Implant Rack Instruments 03.110.000 1.8 mm Universal Variable Angle Locking Drill Guide 03.110.005 Handle, for torque limiting attachment 03.110.011 Attachment Screw for Guide Block T8, 2 ea. 03.110.021 1.8 mm Drill Guide with measuring, for VCP Guide Block, 2 ea. Guide Blocks, for volar column distal radius plate 03.110.028 7 hole head, right 03.110.029 7 hole head, left 03.110.016 8 hole head, right 03.110.017 8 hole head, left 03.111.005 Depth Gauge, for 2.0 mm, 2.4 mm and 2.7 mm screws 292.12 1.25 mm Kirschner Wire, 150 mm, trocar point (10/pkg.) 292.16 1.6 mm Kirschner Wire, 150 mm, trocar point (10/pkg.) 310.21 2.0 mm Drill Bit, quick coupling, 125 mm, 2 ea. 310.509 1.8 mm Drill Bit with depth mark, quick coupling, 110 mm, 2 ea. 311.43 Handle, with quick coupling 314.453 Short StarDrive Screwdriver Shaft, T8, self-holding, quick coupling, 55 mm 314.467 StarDrive Screwdriver Shaft, T8, 105 mm 319.39 Sharp Hook 323.029 Threaded LCP Drill Guide, for LCP Distal Radius Plates, 2 ea. 323.035 1.8 mm Threaded Drill Guide, short, 1.8 mm, 2 ea. 323.202 2.4 mm Universal Drill Guide 323.26 2.7 mm Universal Drill Guide 398.41 Reduction Forceps with points, broad, ratchet, 132 mm Compact Distal Radius System Synthes 3
LCP Compact Distal Radius Instrument and Implant Set Stainless Steel (01.119.051) and Titanium (01.119.054) 399.18 Hohmann Retractor, 6 mm width, small, short narrow tip, 160 mm length 399.481 Periosteal Elevator, 3 mm width, curved blade, round edge 399.49 Hohmann Retractor, for small fragments, 15 mm width, broad shank, 160 mm length 399.97 Reduction Forceps, with points, 130 mm length, ratchet 511.776 Torque Limiting Attachment, 0.8 Nm, quick coupling Implants 2.4 mm LCP Volar Column Distal Radius Plates Head Shaft Stainless Steel Titanium Holes Holes 02.110.830 04.110.830 7 3 right 02.110.831 04.110.831 7 3 left 02.110.840 04.110.840 7 4 right 02.110.841 04.110.841 7 4 left 02.110.430 04.110.430 8 3 right 02.110.431 04.110.431 8 3 left 02.110.440 04.110.440 8 4 right 02.110.441 02.110.441 8 4 left 1.8 mm LCP Buttress Pins, 3 ea. 200.190 400.190 12 200.191 400.191 14 200.192 400.192 16 200.193 400.193 18 200.194 400.194 20 200.195 400.195 22 200.196 400.196 24 200.197 400.197 26 200.198 400.198 28 2.4 mm Locking Screws, self-tapping, with T8 StarDrive recess Qty. 212.810 412.810 10 5 212.812 412.812 12 5 212.814 412.814 14 10 212.816 412.816 16 10 212.818 412.818 18 10 212.820 412.820 20 10 212.822 412.822 22 10 212.824 412.824 24 5 212.826 412.826 26 5 212.828 412.828 28 5 Titanium Grade 4 * Titanium alloy (Ti-6Al-7Nb) 4 Synthes Compact Distal Radius System
2.4 mm Cortex Screws, self-tapping, 201.760 401.760 10 201.762 401.762 12 201.764 401.764 14 201.766 401.766 16 201.768 401.768 18 201.770 401.770 20 201.772 401.772 22 201.774 401.774 24 201.776 401.776 26 201.778 401.778 28 2.7 mm Cortex Screws, self-tapping, 202.870 402.870 10 202.872 402.872 12 202.874 402.874 14 202.876 402.876 16 202.878 402.878 18 202.880 402.880 20 202.882 402.882 22 202.884 402.884 24 202.886 402.886 26 202.888 402.888 28 Accessories Length Marker Push Pins, (5/pkg.) Length (mm) 60.116.451 Blank 60.116.310 10 60.116.312 12 60.116.314 14 60.116.316 16 60.116.318 18 60.116.320 20 60.116.322 22 60.116.324 24 60.116.326 26 60.116.328 28 Screw Type Push Pins, (5/pkg.) 60.116.503 Buttress 60.116.507 Cortex 60.116.513 Locking Label Sheets 60.116.554 Label Pack, for 2.4 mm screws and instruments 60.116.555 Label Pack, for 2.7 mm screws and instruments Note: Addition of the VA Implant and Screw Set (01.119.016/01.119.018) upgrades sets (01.119.051) and (01.119.054) to a VA and LCP Compact Distal Radius Instrument and Implant Set. * Titanium alloy (Ti-6Al-7Nb) Compact Distal Radius System Synthes 5
Also Available Sets 01.119.052/ VA and LCP Compact Distal Radius 01.119.055 Instrument and Implant Set (stainless steel and titanium) 01.119.016/ VA Implant and Screw Set 01.119.018 (stainless steel and titanium) 01.119.017/ LCP Implant and Screw Set 01.119.019 (stainless steel and titanium) Graphic Cases 60.119.011 Instrument Tray, 2/3 Length 60.119.012 VA Implant Rack 60.119.013 Lid for VA Implant Rack 60.119.014 Plate Tray for VA Implant Rack 60.119.015 LCP Implant Rack 60.119.016 Lid for LCP Implant Rack 60.119.017 Plate Tray for LCP Implant Rack 60.119.018 Guide Block Tray 60.119.051 Lid, 2/3 Length Note: 60.119.012 (VA Implant Rack) includes 60.119.013 (lid) and 60.119.014 (plate tray), and is included in the Variable Angle Compact Distal Radius Instrument and Implant Sets (01.119.050/01.119.053) and VA and LCP Compact Distal Radius Instrument and Implant Sets (01.119.052/01.119.055). 60.119.015 (LCP Implant Rack) includes 60.119.016 (lid) and 60.119.017 (plate tray), and is included in the LCP Compact Distal Radius Instrument and Implant Sets (01.119.051/01.119.054) and VA and LCP Compact Distal Radius Instrument and Implant Sets (01.119.052/01.119.055). Instruments 319.006 Depth Gauge for 2.0 mm and 2.4 mm cortex screws 02.111.500.10 1.25 mm Plate Reduction Wire, threaded tip with small stop, 150 mm 02.111.501.10 1.25 mm Plate Reduction Wire, threaded tip with large stop, 150 mm Implants All distal radius plates may be added to the sets. For product numbers and additional information, please refer to the corresponding technique guides: 2.4 mm LCP Distal Radius System 2.4 mm Variable Angle LCP Distal Radius System 2.4 mm Variable Angle LCP Dorsal Distal Radius Plates 2.4 mm Variable Angle LCP Volar Rim Distal Radius Plates Synthes USA 1302 Wrights Lane East West Chester, PA 19380 Telephone: (610) 719-5000 To order: (800) 523-0322 Fax: (610) 251-9056 Synthes (Canada) Ltd. 2566 Meadowpine Boulevard Mississauga, Ontario L5N 6P9 Telephone: (905) 567-0440 To order: (800) 668-1119 Fax: (905) 567-3185 www.synthes.com 2012 Synthes, Inc. or its affiliates. All rights reserved. LCP and Synthes are trademarks of Synthes, Inc. or its affiliates. Printed in U.S.A. 12/12 J12023-A