ACTIVITY SCANNER 3D Dental Scanner made in Germany NEW ACTIVITY SOFTWARE OPTICAL DENTAL SCANNER ERGONOMIC PRECISION INNOVATION CRANIUM-BASED MEASUREMENT FAST KNOW HOW EASE OF USE OPEN INTERFACE www.smartoptics.de
WORKFLOW Order Management Plaster Model Scanner ORDER ACTIVITY SERIES The latest generation of three dimensional scanners from smart optics leads the market with high quality and precision within compact design. With exceptional 10-micron accuracy, our white-light scanners provide fully-open STL scans which result in the best fit and finest detail for all kinds of dental CAD restorations. The Activity Series was developed in collaboration with dental laboratories and clinics for everyday use in practice. Many years of hands-on experience have been factored into the design, such as an ergonomic pull-out drawer for the convenient and safe storage of tools, adapters and more. The new fully-automated 3D calibration feature simplifies both the user operation and automatic calculation of implant positions for the design of implant bars. The latest user software is the basis for accurate constructions, for example, crowns, inlays and implant restorations. with the fully automatic 3D calibration ensures accuracy. 02
Milling CAD Design Rapid Prototyping THE PRODUCTIVE SCANNER FOR EACH LABORATORY: ACTIVITY 855 The Activity 855 convinces with impressive speed and accuracy. The scan of a single die lasts less than 60 seconds, the digitization of an entire jaw or three-unit bridge just 90 seconds. The scanning of twelve individual dies with the multicase module lasts only 80 seconds, setting new standards in terms of speed. The developed, larger measurement field and fully-automatic two-axis system ensures pinpoint accuracy of long bridges and implant bars. The removable object holder and tool drawer ensures ergonomic operating of the Activity 855, scan bodies, screws and tools close to hand. While scanning, bite registrations and model segments can be stored safely. Activity 855 Fast, fully-automatic scanner Large measurement field Perfect for directly screwed implant bars with long spans Very fast scanning and calculation times Highly accurate results by automated 3D calibration Removable object holder Accuracy up to 6 microns Output in the open STL file format No license fees 03
THE SCANNER FOR THE RIGHT SKULL VIRTUAL ARTICULATION: ACTIVITY 885 Building on the success of the Activity 880, the Activity 885 leads dental laboratories and orthodontic practices into new territory. The fast two-axis system with patented ScanFixator provides accurate capture of cranio-facial information from physical articulators. With dentprogress or dentcreate! CAD software, the scan models, jaw joint positions, and articulator settings are accurately transferred from the physical articulator to the CAD software. The resulting dynamic occlusion design creates highly-functional restorations, saving the dentist valuable chairside time. The SAM, Artex, Baumann and Gamma articulation systems are currently supported. The Activity 885 is a patented dental scanner for the scanning of jaw models in craniofacial coordinates. Models that have been previously aligned in an articulator (using a face bow) can be positioned within the scanner using the corresponding magnetic spacer plates. After scanning the upper and lower jaws separately, the two models are placed in occlusal relation to one another by means of the ScanFixator and digitized. The Activity software provides the digital scan models, along with the patient-specific condyle position. The scan data and positions are saved in the open STL format, allowing them to be processed immediately by CAD software, including dentprogress and dentcreate!. With the Virtual Articulator module and patient-specific pecific data, the models can be used to simulate protrusive and lateral jaw movements to automatically construct occlusal surfaces for all kinds of restorations. Activity 885 Fast, fully-automatic scanner Transfer of jaw joint position into virtual articulator ScanFixators for Articulators SAM, Artex, Baumann, Gamma Large measurement field Highly-accurate results by automated 3D calibration Perfect for longer directly screwed implant bars Accuracy up to 6 microns Output in the open STL file format No license fees 04
THE SCANNER FOR HIGH PRECISION DEMANDING USERS: ACTIVITY 888 When it comes to accuracy, implant bars and bridges are the most complex indications in dental prosthetics. For this reason, smart optics has developed the Activity 888 Dental Scanner High Performance for ambitious dental laboratories and implantology practices who put great emphasis on the highest precision and level of detail. By using the RPS procedure (reference positioning system), which was developed by smart optics, the already high precision of the Activity product range was increased even further. The referenced measuring object is also captured during the scanning process of a jaw, so that the measuring body is included in the calculation, ensuring an ever higher level of precision. The Activity 888 enables high-precision digitization of even the most complex implant works with ease within a very short period of time. Whether it s implant-borne bar constructions or directly screwed implantborne bridges, the user is equipped to handle any dental restoration work with the Activity 888 and the proven smart optics Activity scan software. Of course the High Performance scanner Activity 888 uses the well-established modules of the Activity range, such as seconddie and multicase, but also the patented scan fixators which ensure a craniallysituated rendering of the condylar positions. Activity 888 High-Performance-Scanner Highest accuracy and brilliant details ScanFixatores for Artex, SAM, Baumann,Gamma available Correct transmission of the condyle in virtual articulators High ease of use Removable object holder and tool drawer ensures ergonomic operating Accuracy up to 4 microns Output in the open STL file format No license fees 05
ACTIVITY MODULE multicase The Activity software module multicase, in conjunction with the multicase adapter digitizes twelve single dies automatically very quickly. Offset crowns can be scanned much more efficiently, and for more than one patient at a time. multicase* Increase in productivity 80 seconds scan time for 12 dies Optimal support for high throughput to offset and Offset crowns Scope of delivery contains software module and multicase adapter ACTIVITY MODULE seconddie The software module seconddie increases the efficiency of the scanning process. A fully-segmented saw-cut-model can be digitized in just three steps. Manual intervention by the user is reduced to a minimum. Time savings of up to 30% and hands-free scanning is the result at all, in combination with our fully-automatic Activity scanners. Using the strategy, up to sixteen segments can be scanned at one. seconddie* Reduced time spent at large saw-cut models Increases effectiveness up to 30% Only three steps to scan up to 16 segments * Ask your dealer which version of the modules are supported CAD SOFTWARE dentprogress A free demo version can be used at www.dentprogress.de! Adapted to the needs of dental laboratories, the 3D design software dentprogress2015 focuses on ease of operation as well integration with the scanners of the Activity series. Those looking for an effective and performance-oriented software for both beginners and professionals soon arrive at results due to the intuitive software: all functions and tools of the software can be accessed rapidly via direct access. The interfaces remain unobtrusive in the background and only become visible when desired and approached with the mouse. We are happy to provide additional information on the disposal to dentprogress. 06
OVERVIEW NEW Model Activity 855 Activity 885 Activity 888 Accuracy 6 µm 6 µm 4 µm Implant Bar accuracy (according to DIN 12836, measured distance of 50.8 mm) 8 µm 8 µm 6 µm Dimensions (W x H x D) mm 490 x 430 x 440 490 x 430 x 440 490 x 430 x 440 Measurement field (X x Y x Z) mm 80 x 60 x 85 80 x 60 x 85 60 x 45 x 60 Complete Jaw Measurement Time 90 sec. 90 sec. 110 sec. Single Tooth Measurement Time 55 sec. 55 sec. 60 sec. Measurement Time 3-unit bridge 90 sec. 90 sec. 95 sec. Weight 32 kg 32 kg 34 kg Windows 7, 64-Bit Windows 8, 64-Bit ScanFixator available multicase available seconddie available System Tool Drawer Power Supply Voltage Interfaces Housing Color (other colors available) 100 240 VAC, 50 /60 Hz RAL 9003 USB RAL7016 Compatibility with dentcreate! Ideal for dentprogress Deliveries include Connector cable set Software CD with installation program Printed operation manual Stone model for fully-automated 3D-calibration Our scanner software is multilingual, selectable as a system property: English, German, French, Italian, Spanish, Portuguese, Greek, Turkish, Russian, Japanese and Chinese. Other language packs on request. For the best use of Activity Scanner, we recommend a Dell workstation with the operating system Windows 7 / Windows 8; configured and build for smart optics solutions. 07
smart optics Owner-operated smart optics was founded in 1996 and is certified in accordance with the ISO13485 and ISO 9001 standards. The high technology development and production enterprise is located in Bochum, Germany in the heart of the Ruhr river valley, an area transitioning from heavy industry on to research and engineering. The primary research areas of the company are in electro-optical systems, mechanics, and software development, where novel custom solutions are created for customers and partners worldwide. With a team consisting of engineers, physicists, software developers, machinists, technicians and mechanics, smart optics produces testing and 3D measurement systems for both direct sales and OEM partners in a wide variety of industries. Our electronics product verification and quality control systems have been deployed at many international corporations. Smart optics 3D measurement systems have been adopted in the dental and medical industries in clinics, laboratories, and production plants around the globe. Smart optics is happy to provide a list of local resellers upon request. Activity series dental scanners can be purchased from authorized dealers. smart optics Sensortechnik GmbH Lise-Meitner-Allee 10 44801 Bochum, Germany Phone + 49 234 / 29 828-0 Fax + 49 234 / 29 828-20 E-mail: info@smartoptics.de www.smartoptics.de smart optics 02.15 Subject to technical changes/modifications without notice. Errors and omissions excepted.