Advanced Prophy and Cavity Preparation Without Rotation
The Aquacut Quattro enables you to perform a fast and effective cleaning of your patient s mouth to give a much quicker and more accurate diagnosis of their dental condition. At the twist of a switch, the Aquacut Quattro changes into a powerful cutting tool that can cut hard tissue quickly. Unlike conventional rotary cutting instruments, however, the Aquacut Quattro is not in direct contact with the tooth structure. There is no vibration, heat generation, turbine noise or smell. Moreover, in most cases the gentle action of the Aquacut Quattro removes the need for local anaesthesia, saving you time and making the whole experience far less traumatic for your patient. CAVITY PREPARATION TO PROPHY AT THE TWIST OF A SWITCH POWDER CONTROL SPEED CONTROL
C U T, WA S H A N D D R Y POWDER C ARTRIDGES E AS Y TO US E AN D V E R SATIL E The handpiece is autoclavable and comes in five colour-coded cutting nozzle sizes. The long-life tungsten carbide cutting nozzles can be easily changed - depending on treatment. 0.8mm 0.6mm 0.4mm FO OT CO N T R O L The unique 3-way foot control enables cut, clean, wash and dry operations to be carried out through the same handpiece without withdrawing from the mouth - a great time saver. 29 MICRON ALUMINIUM OXIDE CAVITY PREPARATION Self-contained disposable, gama-irradiated powder cartridges allow for quick and easy replacement. The cartridge has an inbuilt feed system that ensures zero maintenance as it is automatically replaced at each change. 53 MICRON ALUMINIUM OXIDE COMPOSITE RESTORATION H YDRO PA RT ICLE T E CH N OLOGY The Aquacut s high-speed fluid stream, fed from a small reservoir, provides a continuous cavity wash during cutting and virtually eliminates airborne powder and tooth debris. This unique technology gives outstanding cutting efficiency and minimal patient discomfort. SODIUM BICARBONATE POLISHING / PROPHY SYLC FOR AQUACUT DESENSITISING CLEANING AND STAIN REMOVAL
CLEAN I N G P OL ISH I NG BEFORE C AVIT Y P REPAR ATION AND P ROP HYL AXIS The AQUACUT QUATTRO is ideal for use in conjunction with modern dental adhesives and filling materials. It rapidly and efficiently removes composites or hard tooth tissue, leaving cavity surfaces ready to receive the latest resins. It is an exceptional tool for the repair of composites and enables fast repair of existing fillings that have begun to fail. The design of the AQUACUT QUATTRO allows you to change instantly from cutting mode to stain removal - without changing the handpiece. This facility makes the AQUACUT QUATTRO equally useful to dentists and hygienists. TREATING CUT TING AND SUPPLIED COMPLETE AND READY TO USE TREATMENT The AQUACUT QUATTRO system is supplied with handpiece, foot control pedal and two grades of cutting media, plus stain removal powder. R E S TOR AT ION All that is required is compressed air (clean, dry and up to 7 bar in pressure). A suitable air compressor can be purchased as an optional extra. SAFE FOR TEETH AFTER The AQUACUT QUATTRO cuts very conservatively, minimising the removal of sound tooth material. There is no direct contact with the tooth - the risk of chipping or stress fracturing is eliminated. BEFORE TREATMENT AFTER TREATMENT FINISHED RESTORATION
ADVANTAGES OF THE AQUACUT QUAT TRO THE PERFECT INSTRUMENT FOR MINIMALLY INVASIVE DENTISTRY 1. 2. 3. 4. 5. 6. 7. 8. No chipping or stress fractures, plus minimal removal of sound tooth material Quick and efficient - reduced treatment times Versatile able to clean, treat, wash and dry Dr. R. Narendranath Patient friendly no heat, noise, vibration or smell Reduces the need for local anaesthesia More conservative than a hard tissue laser and at a fraction of the cost Dr. J. Patel Fully portable and easy to operate requires only an air supply A unique product, using advanced patented technology Dr. S. Hargreaves
SPECIFICATIONS External Supplies: Clean, dry, compressed air, 6 bar (90psi) minimum, 7.5 bar (110psi) maximum. Inlet air supply connection Ø 4mm push-in fitting. Foot Control : Three-way multi-functional foot valve for cut, wash and dry control. 2m (6ft), three-core pneumatic supply tube. Output Pressure: Infinitely variable cutting/polishing air pressure between 0-7 bar (100psi), controllable via rotating switch and pressure gauge. Cutting Media: 53 and 29 micron Aluminium Oxide. Powder rate infinitely variable between 0 and 6g / min (0.2oz) via rotating switch and pressure gauge. Polishing Media: Handpiece: Sodium Bicarbonate, Sylc For Aquacut Anodised Aluminium with separate integral powder and fluid channels (both operated by foot control). Nozzles made from stainless steel tube with Tungsten Carbide tip. Handpieces incorporate quick release system for convenient changeover of cutting sizes. Colour coded handpieces for simple tip-size identification: Green - 0.4mm (optional extra) Silver - 0.6mm (supplied with the Aquacut QUATTRO) Gold - 0.8mm (optional extra) CERTIFICATION: CLASS IIA HOMOLOGATION CE0120 CLASS IIA UNITED STATES FDA CLASS II CANADA TPD CLASS II AUSTRALIA TGA US PATENT NO.6676409 Parallel Patents Pending DIMENSIONS Depth: 240mm / 9.4 Height: 240mm / 9.4 Width: 300mm / 11.8 Weight: 4.1kg / 9.0lbs 2010 VELOPEX INTERNATIONAL UNITED KINGDOM UNITED STATES OF AMERICA FRANCE VELOPEX is a registered Trademark of Medivance Instruments Limited, United Kingdom. The design of the VELOPEX products is protected by patent in all major countries. Medivance reserves the right to make changes and improvements in its products which may vary the specifications from those in this brochure.
INTERNATIONAL FRENCH OFFICE VELOPEX INTERNATIONAL 14 route de Montreuil le Gast B.P. 45 35520 Melesse Tel. +33 (0)2.99.13.22.59 Fax. +33 (0)2.99.13.22.60 www.velopex.fr UNITED KINGDOM (HEAD) OFFICE MEDIVANCE INSTRUMENTS LTD. Barretts Green Road London NW10 7AP Tel. +44 (0)20 8965 2913 Fax. +44 (0)20 8963 1270 www.velopex.com USA OFFICE VELOPEX INTERNATIONAL 105 East 17th Street Saint Cloud Florida 34769 Tel. +1 (407) 957 3900 Fax. +1 (407) 957 3927 www.velopexusa.com aqb23.12.10rpc