Strong bonds create beautiful and long-lasting restorations
As the system for complete restorative simplicity, Celtra Press Zirconia-reinforced Lithium Silicate (ZLS) and Calibra Universal Self-Adhesive Resin Cement perform best when used together. Individually, both materials provide high strength, exceptional esthetics, and ease of use, resulting in superior restorations.
Celtra Press Zirconia-reinforced Lithium Silicate (ZLS) and Calibra Universal Self-Adhesive Resin Cement For your Restorations with Preparations Unmatched performance for an effortless workflow When the 500+ MPa* strength of Celtra Press (ZLS) is combined with the one-step cementation of Calibra Universal Cement, the result is a remarkably strong and long-lasting bond that you can rely on without the need for a separate etchant or adhesive! Designed to perform as one simple system, both materials have been engineered to deliver unique benefits. To complement the esthetics of Celtra Press (ZLS), Calibra Universal Cement is formulated with Shade Stable technology, providing you with 5 beautiful shades to choose from. Together, Celtra Press (ZLS) and Calibra Universal Cement optimize the workflow for a seamless restorative procedure, case after case. *Celtra Press (ZLS) 3-point bending strength test results.
From beginning to end, working with Celtra Press (ZLS) and Calibra Universal Cement is simple STEP 1: Create a retentive preparation Preparation with adequate cervical-occlusal height (>4mm) Taper between 10-20 Short clinical crown (<3mm) Over-tapered preparation greater than 20 STEP 2: Apply Calibra Universal Cement STEP 3: Seat restoration STEP 4: Tack cure and remove excess cement Strong bonds are built on trust.
Easy cleanup with Calibra Universal Cement Even a tiny bit of excess cement left behind can cause big problems. With Calibra Universal Cement, benefit from the speed of tack curing without the stress of over-curing. Tack cure with confidence: up to 10-second tack cure window 1,2 More cleanup time: up to 45-second extended gel phase 2 Indications for cementation usage* (Calibra Universal Cement is intended for use on crowns with retentive preparation) Material Indication Preparation Calibra Cement Composite/Glass Ceramic Crown Calibra Ceram High Strength Glass Ceramic Crown, Bridge Calibra Universal Ceram Zirconia/Metal Crown, Bridge Calibra Universal Endodontic Post Calibra Universal Inlay, Onlay Veneer Calibra Veneer *Your sample of Calibra Universal Cement is intended for use on crowns with retentive preparation. For all other indications, refer to the chart above or visit calibracement.com and use the Calibra Cement Selection Tool to find the right cement for your case.
Contact your Dentsply Sirona representative to order Calibra Universal Self-Adhesive Resin Cement. Visit dentsplysirona.com and calibracement.com to find the right cement for every one of your clinical cases. For more information on how to use Calibra Universal Cement, and other product details such as technical specifications and formulation, please call 1-800-532-2855; local 57249. 1 10-second tack cure window equals 5-second wave cure per surface 2 For excess cement cleanup, monowave output LED lights with a single peak output around 470nm are recommended. High power, dual, or broad spectrum lights may cause premature hardening of excess cement. Check curing light effect on mixed cement in the laboratory prior to clinical use. 2017 Dentsply Sirona Inc. All rights reserved. ML070016B (R 8/24/17)