CPT 6 Stainless Steel Primary Hip System Surgical Technique The proven, simple solution
1Osteotomy of the Femoral Neck Superimpose the Osteotomy Guide on the proximal femur. Position the guide over the center of rotation of the femoral head. Mark the location of the neck cut. Remove the guide and make the cut. 2Open the Medullary Canal Use the Starter Awl to open the canal in line with the femoral axis. Insert the Charnley Awl to confirm alignment and remove medial trochanteric bone. 3Open Lateral Canal Use the Box Osteotome to cut laterally into the lateral femoral neck and medial trochanteric bone. 4Rasp the Femoral Canal Pass the smallest femoral rasp down the intramedullary canal, and use sequentially larger rasps until templated size is reached. Note: Size selection should avoid oversizing and allow for an adequate bed of cancellous bone.
5Trial Reduction and Range of Motion Assemble cone provisional and trial head. Perform trial reduction. 6Cement Preparation Plug the distal canal. Inject bone cement and pressurize using femoral pressurizer seal and pressurizer plate. 7Insert Femoral Component Attach centralizer and assemble femoral component onto stem inserter. Insert femoral component to align etch mark at osteotomy level. Remove stem inserter as soon as stem is seated. Place cement restrictor seal and plate around stem and press against osteotomy cut to restrict cement during polymerization. 8Reduce Hip Once cement has fully polymerized, remove seal and plate, impact femoral head, and reduce hip. Note: The thumb should be placed over the medial femoral neck to maintain cement pressure during stem insertion.
Ordering Information Implants CPT Femoral Stems Standard Offset 00-8011-000-05 CPT SS 6 Degree Taper, petite 00-8011-001-00 CPT SS 6 Degree Taper, size 1 00-8011-002-00 CPT SS 6 Degree Taper, size 2 00-8011-003-00 CPT SS 6 Degree Taper, size 3 00-8011-004-00 CPT SS 6 Degree Taper, size 4 00-8011-005-00 CPT SS 6 Degree Taper, size 5 Extended Offset 00-8011-002-20 CPT SS 6 Degree Taper, Extended Offset, size 2 00-8011-003-20 CPT SS 6 Degree Taper, Extended Offset, size 3 00-8011-004-20 CPT SS 6 Degree Taper, Extended Offset, size 4 32-8333-055-00 CPT Hip Centralizer 32-8333-056-00 CPT Revision Centralizer 00-1109-009-00 Intramedullary Poly Plug, Small 00-1109-019-00 Intramedullary Poly Plug, Large CPT Cement Accessories 00-5069-054-00 Miller Bone Cement Injector Flexible Nozzle 32-8334-010-01 Femoral Pressurizer Seal, Large (Blue) 32-8334-010-02 Femoral Pressurizer Seal, Small (Natural) 32-8334-012-00 Cement Restrictor Seal Long Stems 00-8011-007-00 CPT SS 6 Degree Taper, Long Stem, size 2 00-8011-008-00 CPT SS 6 Degree Taper, Long Stem, size 3 Stainless Steel Femoral Heads 00-8011-001-22 Zimtron Head, 6 Degree Taper, 22mm, Short Neck 00-8011-002-22 Zimtron Head, 6 Degree Taper, 22mm, Medium Neck 00-8011-003-22 Zimtron Head, 6 Degree Taper, 22mm, Long Neck 00-8011-001-26 Zimtron Head, 6 Degree Taper, 26mm, Short Neck 00-8011-002-26 Zimtron Head, 6 Degree Taper, 26mm, Medium Neck 00-8011-003-26 Zimtron Head, 6 Degree Taper, 26mm, Long Neck 00-8011-001-28 Zimtron Head, 6 Degree Taper, 28mm, Short Neck 00-8011-002-28 Zimtron Head, 6 Degree Taper, 28mm, Medium Neck 00-8011-003-28 Zimtron Head, 6 Degree Taper, 28mm, Long Neck 00-8011-001-32 Zimtron Head, 6 Degree Taper, 32mm, Short Neck 00-8011-002-32 Zimtron Head, 6 Degree Taper, 32mm, Medium Neck 00-8011-003-32 Zimtron Head, 6 Degree Taper, 32mm, Long Neck 00-8011-001-36 Zimtron Head, 6 Degree Taper, 36mm, Short Neck 00-8011-002-36 Zimtron Head, 6 Degree Taper, 36mm, Medium Neck 00-8011-003-36 Zimtron Head, 6 Degree Taper, 36mm, Long Neck 00-8011-001-40 Zimtron Head, 6 Degree Taper, 40mm, Short Neck 00-8011-002-40 Zimtron Head, 6 Degree Taper, 40mm, Medium Neck 00-8011-003-40 Zimtron Head, 6 Degree Taper, 40mm, Long Neck CPT Optional Accessories 32-5014-053-00 316L Stainless Steel Wire Mesh 6 x 6 Instrumentation CPT Primary Instrumentation 31-8334-002-01 CPT Hip Rasp, Size 1 x 180mm 31-8334-002-02 CPT Hip Rasp, Size 2 x 180mm 31-8334-002-03 CPT Hip Rasp, Size 3 x 180mm 31-8334-002-04 CPT Hip Rasp, Size 4 x 180mm 31-8334-002-05 CPT Hip Rasp, Size 5 x 180mm 31-8334-003-00 CPT Cone Provisional 31-8334-004-00 CPT Stem Inserter 31-8334-011-00 Femoral Pressurizer Plate 31-8334-013-00 Cement Restrictor Plate 00-7896-004-00 Charnley Awl 00-6551-060-00 T-Handle (Zimmer Chuck) 00-6601-005-00 Rasp Handle 00-6601-006-02 Saddle Locator 00-6601-006-12 Osteotomy Guide 12/13mm 00-6601-036-00 Starter Awl 00-6601-054-00 Box Osteotome (small) 006601-056-00 Box Osteotome (large) 00-8334-095-00 CPT Instrument Case
Ordering Information Instrumentation (cont.) CPT Revision Instrumentation 31-8334-006-01 CPT Hip Revision Tamp, Size 1 x 165mm 31-8334-006-02 CPT Hip Revision Tamp, Size 2 x 165mm 31-8334-006-03 CPT Hip Revision Tamp, Size 3 x 165mm 31-8334-006-04 CPT Hip Revision Tamp, Size 4 x 165mm 31-8334-006-05 CPT Hip Revision Tamp, Size 5 x 165mm 31-8334-007-10 CPT Femoral Packer, 10mm x 40cm 31-8334-007-12 CPT Femoral Packer, 12mm x 40cm 31-8334-007-14 CPT Femoral Packer, 14mm x 40cm 31-8334-007-16 CPT Femoral Packer, 16mm x 40cm 31-8334-008-02 Proximal Packer (small) 31-8334-008-03 Proximal Packer (medium) 31-8334-008-04 Proximal Packer (large) 31-8334-003-00 CPT Cone Provisional 31-8334-004-00 CPT Stem Inserter 31-8334-005-00 Stem Extractor 31-8334-009-00 CPT Guide Wire 21 31-8334-009-01 CPT Guide Wire 16 31-8334-011-00 Femoral Pressurizer Plate 31-8334-013-00 Cement Restrictor Plate 00-6601-005-00 Rasp Handle 00-5011-008-00 Trochanteric Reamer 00-8334-095-00 CPT Instrument Case
Please refer to package insert for complete product information, including contraindications, warnings, precautions and adverse effects. Contact your Zimmer representative or visit us at www.zimmer.com 2002, 2009 Zimmer, Inc. 0805-H12 3/19/2009 LL