Alpha-Bio Tec specializes in the development and production of advanced dental solutions, focusing on the fields of implants and prosthetics. Over the past few years the world of implantology has greatly advanced. Starting with smooth implants, advancing to slightly tapered and threaded implants and to today's upscale technology using pronouncedly tapered, double and variable threaded implants with rough implant surfaces. Alpha-Bio Tec was the first to introduce a tapered, conical implant with a large thread step and unique features never seen before in the world of implantology. At first, the uniquely shaped Spiral Implant - the SPI - was met with suspicion. But this faded quickly. Those who tried the SPI were immediately impressed by its features, especially by its incredible primary stability, its ability to change direction during placement and its notable success rate. Today, the SPI is Alpha-Bio Tec's most widely used implant. Those who used the SPI implant testify: "It's the easiest, most convenient implant to use. It provides very high primary stability. No wonder so many have tried to imitate it." We live in a high paced world, where time is of the essence. Patients nowadays seek quick and easy dental solutions that provide them with aesthetically pleasing results in a short period of time. Patients would like to leave the dental clinic with teeth that look and feel real. Alpha-Bio Tec's implants have been design and developed to provide a variety of aesthetic solutions, with strong emphasis on immediate implantation and immediate loading. The NanoTec implant surface promotes healing and growth of tissues adjacent to the implant surface, resulting in an accelerated and improved osseointegration process, shorter healing period and a longlasting and durable aesthetic solution for the patients. Alpha-Bio Tec pays close attention to its customers needs. Simplicity, comfort and ease of use are of the utmost importance to our customers. The SPI, Alpha-Bio Tec's leading implant, is easy to insert, provides better control during placement and reaches very high primary stability. 2
Coronal Part Design Features: l Micro rings l Bone platform shifting l Rough surface to the top l Threads reaching the top of the implant l Greater surface area l Less crestal resorption l Better load distribution l Decreased crestal stress Improved Internal Hex Design Features: l Extremely precise internal hex l One platform for all diameters l Perfect implant-abutment connection l Simple restoration process Implant Body and Core Design Features: l Tapered body l Tapered core more pronounced than the threads l Osteotome like condensing body l Bone condensing l Primary stabilization l Easy insertion Implant Threads Design Features: l Double thread design 2X2.1mm l Wide thread step l Threads increase in the apical direction l Variable threads design: l Coronal thick square threads l Middle thinner square threads l Apical V threads The coronal threads condense the bone of the apical threads Apical Part sesign Features: l Sharp and deep threads l Narrow core l Apical blade l Straight apical border l Condensing tapper l Easy insertion l High primary stability l Bone condensing l Self drilling l Self tapping l Self tapping l Self drilling l Easy insertion l Helps prevent damage to anatomical structures l Enables the implant to penetrate small diameter prepared sites 3
Achieves extremely high primary stability Enables changing direction during placement Can penetrate smaller diameter prepared sites Ideal for immediate implantation Ideal for immediate loading Ideal for soft bone The spiral implant is indicated for all situations, bone types and surgical protocols. The clinical advantages of the SPI implant make it ideal for all implantology procedures - from the most simple single tooth restoration to the most complicated full mouth rehabilitation. Its unique qualities make it ideal for immediate implantation and for immediate loading procedures. Alpha-Bio Tec. Implant Surface - Implant surface process: Sand-blasting to create a macro surface of 20-40 microns Double thermal acid etching process to create micro pitting between 1 and 5 microns NanoTec advantages: Increased early bone to implant contact Increased stability Shorter healing period Higher predictability Histology after 2 months SEM of surface 4
Bone condensing property and very high initial stability Enables smaller osteotomy which results in minimal bone loss and reduced trauma Enables narrow ridge expansion Reduces the risk of damaging neighboring teeth Self-directing in line of insertion Enables changing direction for optimal restorative position Reduces the risk of perforating the lingual or buccal cortex The SPI's unique features and advantages facilitate its placement in clinically demanding situations and make it ideal for use in complicated cases, for immediate implantation, immediate loading and in soft bone. Small changes in parallelism The ability to redirect the implant's position during implant placement helps achieve parallelism between implants and optimize implant placement. The unique self drilling capabilities of the SPI implant make it possible to change the direction of the implant during placement. Implant redirection is simple - rotate the implant backward 2-3 turns and then insert it into its desired position. Fig. 1 Fig. 2 Fig. 3 5
Stabilization in soft bone and in wide sockets The implant's ability to reach very high primary stability in minimal bone and in very soft bone is desirable in most clinical situations. The unique SPI implant core, threads design and apical part allow it to be anchored and stabilized in minimal bone and in soft bone due to the implant's ability to penetrate prepared sites much narrower in diameter than required for regular implants. Stabilization in soft bone Fig. 1 Fig. 2 Fig. 3 Stabilization in wide sockets Fig. 4 Fig. 5 Fig. 6 Fig. 7 6
Catalog 0.5 mm 3.75 mmd SPI 3.3 3.75 SPI 3.75 SPI 4.2 SPI 5 SPI 6 3.75 3.75 3.75 3.75 1.55 mmd 2 mmd 2.2 mmd 2.6 mmd 3.5 mmd Platform Shifting 1.55 mmd SPI 3.3 3.3 mmd 5 mmd Length 8 mm 10 mm 11.5 mm 13 mm 16 mm Length 8 mm 10 mm 11.5 mm 13 mm 16 mm Cat.no 1308 1300 1301 1303 1306 Cat.no 1348 1340 1341 1343 1346 Bone type IV DR 2.0 Bone type III, IV DR 2.0 2.8 3.2 3.65 4.3 Bone type II, III DR 2.0 2.8 Bone type I, II DR 2.0 2.8 3.2 3.65 4.3 5.2 Bone type I DR 2.0 2.8 3.2 3.75 mmd Length 8 mm 10 mm 11.5 mm 13 mm 16 mm Cat.no 1358 1350 1351 1353 1356 Bone type III, IV DR 2.0 2.8 3.2 Bone type I, II DR 2.0 2.8 3.2 3.65 6 mmd Length 8 mm 10 mm 11.5 mm 13 mm Cat.no 1368 1360 1361 1363 Bone type III, IV DR 2.0 2.8 3.2 3.65 4.3 5.2 Bone type I, II DR 2.0 2.8 3.2 3.65 4.3 5.2 If the cortical bone is hard, you may use this drill as a countersink. 4.2 mmd Length 8 mm 10 mm 11.5 mm 13 mm 16 mm Cat.no 1338 1330 1331 1333 1336 Bone type III, IV DR 2.0 2.8 3.2 3.65 Bone type I, II DR 2.0 2.8 3.2 3.65 4.3 CST implant cover screw Included with all implants. Use Hex Driver HTD 1.25 mm (0.050in). For HS healing abutment, see page 13 in the product catalog. Code CST Cat.No 111 Titanium 4204 DRX 2 4284 DRX 2.8 4324 DRX 3.2 4654 DRX 3.65 4664 DRX 4.3 4684 DRX 5.2 3.3 mm 3.75 mm 4.2 mm 5 mm 6 mm 13 mm 11.5 mm 10 mm 8 mm 13 mm 11.5 mm 10 mm 8 mm 13 mm 0-1 0 Important: If you feel strong resistance at the time of placing the implant, remove the mount and place the insertion tool 2.5mm, rotate back (counter-clockwise) 2-3 turns then continue to screw clockwise. The implant will drill and tap itself. 7
Our warranty - Your peace of mind Alpha-Bio Tec's high quality products meet strict international standards. This is why we can provide you with a Lifetime Warranty for our wide range of implants. In any case of a defect in the product, implant rejection, fracture or contamination of the product, subject to filing a complaint report, Alpha-Bio Tec shall replace the defective merchandise. exactdesign.co.il Warranty: Alpha-Bio Tec warrants that all products will be free of defects in materials and/or workmanship. This warranty applies to the original purchaser only. There are no warranties, express or implied, except this warranty, which is given in lieu of any other warranties, express or implied, including any implied warranty of fitness for a particular purpose. Important - Read instructions before use. A complaint report is available at Alpha-Bio Tec s customer service and will be sent upon demand. 995-0132 R3/04.2011 Alpha-Bio Tec's products are cleared for marketing in the USA and are CE-marked in accordance with the Council Directive 93/42/EEC and Amendment 2007/47/EC. Alpha-Bio Tec complies with ISO 13485:2003 and the Canadian Medical Devices Conformity Assessment System (CMDCAS). Alpha-Bio Tec Ltd. 7 Hatnufa St. P.O.B. 3936 Kiryat Arye, Petach Tikva 49510, Israel Israel T+972-3-9291000 F+972-3-9235055 sales@alpha-bio.net International T+972-3-9291055 F+972-3-9291010 export@alpha-bio.net 5 Beaumont Gate, Shenley Hill, Radlett, Herts WD7 7AR. England Tel / Fax: +44 1923859810