Manufacturer/supplier : Tagros Chemicals India Limited

Similar documents
MATERIAL SAFETY DATA SHEET Ant Vanish Granules

MATERIAL SAFETY DATA SHEET RATSHOT Rodenticide blocks

SAFETY DATA SHEET (91/155/EC) IDENTIFICATION OF THE SUBSTANCE /

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET. Roban Rodenticide Blocks

Product. Recommended Uses: Company SHARDA WORLDWIDE EXPORTS PVT LTD. 1. Identification of the substance/preparation and company/undertaking

REVISION MATERIAL SAFETY DATA SHEET

Safety Data Sheet. 1. Identification. 2. Hazard Identification. 3. Composition / Information on Ingredients. Report Date. 16-Feb-16.

SAFETY DATA SHEET ARALDITE RAPID STEEL HARDENER

Hop Oil Emulsion Safety Data Sheet

SAFETY DATA SHEET THE BIG CHEESE RAT AND MOUSE KILLER ALL-WEATHER BLOCK BAIT. BAIT (HSE No.: 8794)

Material Safety Data Sheet

Safety Data Sheet 1511BR

Bayer Environmental Science

PRODUCT: CHEMSET 800 SERIES EPOXY ANCHORING ADHESIVE HARDENER

SAFETY DATA SHEET STAINLESS STEEL PUTTY (ST) HARDENER.

WARNING! FLAMMABLE. Keep away from open flame. WARNING! IRRITANT. May be irritating to skin and mucous membranes.

Material Safety Data Sheet. טרופר - Trooper. Name CAS no. Quantity (%) Cyromazine (N-cyclopropyl-1,3,5- triazine-2,4,6-triamine)

SAFETY DATA SHEET EVO-STIK EPOXY RAPID HARDENER

SAFETY DATA SHEET ARALDITE FUSION HARDENER

Thiophanate-methyl -MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIALS SAFETY DATA SHEET. BRIGAND - Bromadiolone Pellets

Material Safety Data sheet

MATERIAL SAFETY DATA SHEET

Safety Datasheet (according to EC regulation 453/2010/EC) Exosex SPTab Date SDS290 Exosex SPTab

Safety Data Sheet Brigand SB

SAFETY DATA SHEET Loxeal Adesivo 34

MATERIAL SAFETY DATA SHEET (MSDS) ZINC SULFATE

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET EVO-STIK EPOXY EXPRESS RESIN

SAFETY DATA SHEET. Vertox Excel (HSE No 8708.)

1. Identification of the substance / preparation and of the company. Trade name: Enzymatic cleaning. Part number:

Safety Data Sheet ADDCURE 943S

This SDS adheres to the standards and regulatory requirements of Great Britain and may not meet the regulatory requirements in other countries.

Material Safety Data Sheet SunClean Concrete Tile Cleaner

This SDS adheres to the standards and regulatory requirements of Great Britain and may not meet the regulatory requirements in other countries.

SAFETY DATA SHEET CLEAR EPOXY GEL COAT & HARDENER

SAFETY DATA SHEET EPOXY COATING RESIN

Bayer Environmental Science

Safety Data Sheet Vulcan P5 DP

Version No: 3 SAFETY DATA SHEET

SAFETY DATA SHEET Anglo Safe-T-Epoxy, Resin

SAFETY DATA SHEET. Section 1: Identification of the substance/mixture and of the company/undertaking. Section 2: Hazards identification

0800 POISON HSNO Classifications: 6.1C, 6.3A, 6.9A, 8.1A, 9.1A, 9.3C

Material Safety Data Sheet

In case of poisoning contact national or local poison information centre (London telephone no )

Material Safety data sheet

Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET ARALDITE RAPID RESIN

(02) (Mon Fri 8am 5pm EST) Emergency Telephone Number: (24 hours) (EMERGENCIES ONLY) Not Scheduled Not a Dangerous Good

SAFETY DATA SHEET (according to EC directive 1907/2006) Update : Version: 1.3 Date : BREAK-THRU S 240

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET 1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF THE COMPANY / UNDERTAKING

Material Safety Data Sheet 47Industrial Park, Lilydale, Victoria 3140 Phone: Fax:

: Corian Joint Adhesive Kit - Component A

Bayer Environmental Science

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET. Brick Kleen. Section 1: Identification of the substance/mixture and of the company/undertaking

RATSAK 1 SHOT RAT & MOUSE BLOCKS

SAFETY DATA SHEET 1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF THE COMPANY / UNDERTAKING

SAFETY DATA SHEET WICKES METAL EPOXY PUTTY

Bayer Environmental Science

MATERIAL SAFETY DATA SHEET WILKINSONS GROUT CLEANER

PHA Topnotes in PG Safety Data Sheet

SAFETY DATA SHEET. Revision Date: Previous date: Page: 1/5

Material Safety Data Sheet (MSDS)

SAFETY DATA SHEET FILDEK FLEXIBLE DECK COATING HARDENER

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET : KIWI SELECT -SMOOTH LEATHER- SELFSHINE CREAM

SAFETY DATA SHEET ONE PART DIPPING EPOXY

Material Safety Data Sheet Conforms to 91/155/EEC and ISO

SAFETY DATA SHEET ARALDITE RAPID RESIN

Material Safety Data Sheet

SAFETY DATA SHEET Zinc Chloride Page 1 Issued: 11/11/2012 Revision No: 1

SAFETY DATA SHEET BRONZE PUTTY HARDENER

NON-Hazardous Chemical, NON-Dangerous Goods

SAFETY DATA SHEET. Allyl phenoxyacetate

Foam Quat Page 1of 5 Foam Quat SAFETY DATA SHEET (2) HAZARD(S) IDENTIFICATION

Abbey Animal Health Pty Ltd Material Safety Data Sheet

Material safety data sheet Profenofos 40% EC+ Cypermethrin 4 %

SAFETY DATA SHEET Page 1 of 5. : Knock Down

PRODUCT NAME POLYESTER BASECOAT

PRODUCT: Ethyl alcohol (denatured) CHEMICAL ABSTRACT NO.: Mixture. Ethyl alcohol ppm Flammable

Ingredient CAS Number Weight % ACGIH TLV PEL STEL Natural Enzymes Not Known 4-11 % Not established Not Established Not Established

SAFETY DATA SHEET Safety Coat - Resin, Antibacterial

Material Safety Data Sheet (Baclofen)

SAFETY DATA SHEET. Section 1: Identification of the substance/mixture and of the company/undertaking. Section 2: Hazards identification

Ident-No: HARDENER HV 998

DARENT WAX COMPANY LIMITED SAFETY DATA SHEET

SAFETY DATA SHEET Break-Free CLP-E

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET EVO-STIK HARD AND FAST METAL PUTTY

Safety Data Sheet according to (EC) No 1907/ ISO

SAFETY DATA SHEET. Section 1: Identification of the substance/mixture and of the company/undertaking. Section 2: Hazards identification

SAFETY DATA SHEET. 1 Identification of the substance or preparation and of the company/undertaking

MATERIAL SAFETY DATA SHEET BLACKCURRANT 543 Page 1(4) Date: 6 April 2004 MSDS Revision: 02 Date created: 12/07/02

Transcription:

MATERIAL SAFETY DATA SHEET IMIDACLOPRID 35% SC 1. IDENTIFICATION OF THE SUBSTANCE AND OF THE COMPANY Identification of the substance : Imidacloprid 35% SC Use of the substance : Insecticide Manufacturer/supplier : Tagros Chemicals India Limited Address : Tagros Chemicals India Ltd. Jhaver Centre, Rajah Annamalai Building, IV Floor, 72, Marshalls Road, Egmore, Chennai-600 008, India Emergency telephone number : +91-44-42007400 Fax number : +91-44-28587873 E-mail : info@tagros.com 2. HAZARDS IDENTIFICATION POTENTIAL HEALTH EFFECTS: EMERGENCY OVERVIEW Eyes : Mild irritant to eyes. Skin : May cause skin irritation. Ingestion : Harmful when swallowed. Inhalation : No hazard in normal use. Product is unlikely to cause any discomfort or irritation. May cause irritation to nose and throat. Environment : Toxic to aquatic organisms

3. COMPOSITION / INFORMATION ON INGREDIENTS Chemical name CAS No. EC No. Classification Con. % w/v Imidacloprid (ISO); 1-(6-chloropyridin-3-ylmethyl)-Nnitroimidazolidin-2-ylidenamine 138261-41-3 428-040-8 Others --- --- 4. FIRST AID MEASURES Xn; R22 N; R50/53 35.0 --- 65.0 Contact with eyes : Hold eye open and rinse slowly and gently with water for 15-20 minutes. Avoid exposing affected eyes to bright light. Seek medical advice and show the container or this material safety data sheet. Contact with skin : Remove contaminated clothing and wash the affected area with water and soap. Call a doctor for treatment advice. Ingestion : Do not induce vomiting. Do not give anything by mouth. Obtain medical attention immediately. If the person is alert, rinse mouth thoroughly with water. Inhalation : If vapours or mists have been inhaled, remove the source of contamination or move victim to fresh air. The patient should be kept under observation and obtain medical attention if irritation persists.

5. FIRE FIGHTING MEASURES Extinguishing media : If product is involved in a fire, use water spray, foam, dry powder, carbon dioxide or sand. Special exposure hazards : Fire may produce irritating or poisonous vapours (toxic compounds of carbon, nitrogen and chlorine), mists or other products of combustion. Protective equipment for fire-fighting : Do not breathe fumes. Wear full protective clothing & self-contained breathing apparatus. Fire fighting guidance : Keep out of smoke. Fight fire from upwind position. Cool closed containers/tanks exposed to fire with water spray. Do not allow run-off to enter drains or water courses. 6. ACCIDENTAL RELEASE MEASURES Personal precautions : Avoid contact with spilled material or contaminated surfaces. If ordinary clothing becomes contaminated, remove it immediately. When dealing with the spillage do not eat, drink or smoke and wear personal protective clothing as detailed in section 8. Environmental precautions : Keep people and animals away. Prevent entry into drains, sewers and watercourses. Methods for cleaning up : Small Spill: Sweep or vacuum up spillage and collect in suitable container for disposal. Large Spill: Liquid spills on floor or other impervious surfaces should be contained and should be absorbed with attapulgite, bentonite or other absorbent clays. Collect contaminated absorbent, place in plastic-lined metal drum and dispose of in accordance with instructions Provided. Thoroughly scrub floor or other impervious surface with a strong industrial type detergent solution and rinse with water.

7. HANDLING AND STORAGE Handling : Wear chemically impervious gloves, safety glasses, goggles or face shield. Mechanical ventilation should be used when handling this product in enclosed spaces. Wash hands thoroughly with soap and water after handling and before eating, drinking, chewing gum, using the toilet. Remove personal protective equipment (PPE) immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing. Read all precautions and instructions on the label. Storage : Store the material in a well ventilated, secure area out of reach of children and domestic animals. Do not store food, beverages or tobacco product in the storage area. Prevent eating, drinking, chewing and cosmetic application in areas where there is a potential for exposure to the material. Wash thoroughly with soap and water after handling. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Exposure limit value : ADI: (JMPR) 0.06 mg/kg bw (2001) Engineering controls : Mechanical ventilation should be used when handling this product in closed spaces Respiratory protection : Use a NIOSH approved respirator in absence of mechanical ventilation. Hand protection : Wear chemical-resistant gloves such as nitrile, neoprene rubber, polyvinyl chloride (PVC).

Eye protection : Wear safety goggles with imperforated side shield and face shield. Skin protection : Avoid contact with skin. Wear apron, boots and full protective suit. Environmental exposure controls : Keep away from food, drink and animal feed stuff. This material and its container must be disposed off as hazardous waste. Avoid release to the environment. Refer to special instructions/safety data sheet. 9. PHYSICAL AND CHEMICAL PROPERTIES Physical state : Liquid Color : White to off-white Odour : Slight characteristic Molecular Weight : 255.7 (Imidacloprid) Relative density : 1.15 Solubility in water : Completely miscible Persistent foam : Maximum: 40 ml after 1 min. Wet sieve test : Maximum: 0.1% retained on a 75 m test sieve.

10. STABILITY AND REACTIVITY Stability : Stable for a period of 2 years under normal warehouse conditions. Conditions to avoid : Avoid excessive heat and flame. Materials to avoid : Avoid contact with strong oxidising agents. Incompatibility : Incompatible with oxidizing agents. 11. TOXICOLOGICAL INFORMATION Acute toxicity Rat LD 50 oral, Rats : 695.74 mg/kg bw (technical) Rat LD 50 dermal, Rats : >2000 mg/kg bw(technical) Skin irritation : Non-irritant to skin of rabbits Eye irritation : Mild-irritant to eye of rabbits Skin sensitization : Non-sensitiser to skin of Guinea pigs Long term studies Carcinogenicity : Non-carcinogenic in rat and mice Mutagenicity : Non-mutagenic Reproductive toxicity : Non-reprotoxic and teratogenic

12. ECOLOGICAL INFORMATION Ecotoxicity Fish, golden orfe : LC 50 (96 h): 237 mg/l (Imidacloprid) : LC 50 (48 h) 85 mg/l (Imidacloprid) Algae, Bees : EC 50 : >100 mg/l (Imidacloprid) : Imidacloprid is harmful to honeybees by direct contact, but no problems expected when not sprayed into flowering crop or when used as a seed treatment. Earthworms, LC 50 :10.7 mg/kg dry soil. (Imidacloprid) Birds, Japanese Quails Mobility Persistence and degradability LD 50 : 31 mg/kg (Imidacloprid) : Imidacloprid and soil metabolites are to be classified as immobile; leaching into deeper soil layers is not to be expected if Imidacloprid is used as recommended. : Environmental DT50 c. 4 h. Besides sunlight, the microbial activity of a water/sediment system is an important factor for the degradation of Imidacloprid. 13. DISPOSAL CONSIDERATIONS Product disposal : Do not empty into drains or waterways. Disposal of product would usually be by incineration in an appropriate licensed commercial incinerator. Advice may be obtained from local waste regulation authorities. Container disposal : Puncture container to avoid re-use. Dispose of empty container in a sanitary landfill or by incineration, or, if allowed by local authorities, by burning.

14. TRANSPORT INFORMATION UN number : 2902 UN class : 6.1 UN packaging group : III Proper Shipping Name : PESTICIDE,LIQUID, TOXIC, NOS Additional information : Imidacloprid designated as marine pollutant. 15. REGULATORY INFORMATION Classification : Xn: Harmful N: Dangerous for the environment Risk Phrases : R20/22: Harmful by inhalation and if swallowed. R 21: Harmful in contact with skin. R 36/37/38: Irritating to eyes, respiratory system and skin. R50/53: Very toxic to aquatic organisms and may cause long-term adverse effects in the aquatic environment. Safety Phrases : S1/2: Keep locked up and out of reach children. S13: Keep away from food, drink and animal feeding stuffs. S24/25: Avoid contact with skin and eyes. S57: Use appropriate containment to avoid environmental contamination S60: This material and its container must be disposed of as hazardous waste S61: Avoid release to the environment. Refer to special instructions/safety data sheets S62: If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label. Reference regulation : Regulation (EC) No 1907/2006

16. OTHER INFORMATION MSDS first issued : 08 th April 2002 MSDS data revised : 07 th February 2012 DISCLAIMER The above information is intended to give general health and safety guidance on the storage and transport of the substance or product to which it relates. It is not intended to apply to the substance or product for which purposes the substance or product label and any appropriate technical usage literature available should be consulted and any relevant licenses, consents or approvals complied with. The requirement or recommendation of any relevant site or working procedure, system or policy in force or arising from any risk assessment involving the substance or product should take precedence over any of the guidance contained in this safety data sheet where there is a difference in the information given. The information provided in this safety data sheet is accurate at the date of publication and will be updated as and when appropriate. No liability will be accepted for any injury loss or damage resulting from any failure to take account of information or advice contained in this safety data sheet.