TM
A Legacy of Serving the Surgical Community Step By Step Instructions For over half a century, Stryker has been developing products based on the expressed needs of leading practitioners. Introducing SMARTLock Hybrid MMF A revolutionary, patented product designed to combine the strength and rigidity of arch bars with the safety and efficiency of MMF screws. With nine potential points of fixation along the plate, posterior fixation and vector control are enhanced when compared to traditional MMF screws. The self-drilling, locking technology of the screws allows for purchase into both the bone and the plate for additional stability. This plate and screw combination omits the need for interdental wiring that is required with arch bars, and thereby reduces the chance of wire stick injuries for health care providers. Contour the plate. 1 You will only find this unique design from Stryker Craniomaxillofacial. US Pat. 8,118,850 FEATURE Reinvented versatile arch bar plate design BENEFIT Eliminates interdental wiring POTENTIAL VALUE Improves OR efficiency Reduces risk of wire stick injuries Eliminates risk of tooth loosening Eliminates need for OR based removal Optimized self-drilling screw with patented SMARTLock technology Minimizes risk of screw backout Rigid plate-to-screw construct Strong, stable anterior and posterior fixation Dedicated instrumentation Ability to fixate with patient specific anatomical structures in mind Reduces risk of tooth root injuries Reduces risk of pressure necrosis US Pat. 6,322,562 Adjust the length of the locking plate with the cutter. 2 Insert locking screw into the center of the plate hole while positioning the spacer instrument between the mucosa and the metal rim of the plate hole. The bar of the middle plate hole is marked to provide midline orientation. 3
A Legacy of Serving the Surgical Community Step By Step Instructions For over half a century, Stryker has been developing products based on the expressed needs of leading practitioners. Introducing SMARTLock Hybrid MMF A revolutionary, patented product designed to combine the strength and rigidity of arch bars with the safety and efficiency of MMF screws. With nine potential points of fixation along the plate, posterior fixation and vector control are enhanced when compared to traditional MMF screws. The self-drilling, locking technology of the screws allows for purchase into both the bone and the plate for additional stability. This plate and screw combination omits the need for interdental wiring that is required with arch bars, and thereby reduces the chance of wire stick injuries for health care providers. Contour the plate. 1 You will only find this unique design from Stryker Craniomaxillofacial. US Pat. 8,118,850 FEATURE Reinvented versatile arch bar plate design BENEFIT Eliminates interdental wiring POTENTIAL VALUE Improves OR efficiency Reduces risk of wire stick injuries Eliminates risk of tooth loosening Eliminates need for OR based removal Optimized self-drilling screw with patented SMARTLock technology Minimizes risk of screw backout Rigid plate-to-screw construct Strong, stable anterior and posterior fixation Dedicated instrumentation Ability to fixate with patient specific anatomical structures in mind Reduces risk of tooth root injuries Reduces risk of pressure necrosis US Pat. 6,322,562 Adjust the length of the locking plate with the cutter. 2 Insert locking screw into the center of the plate hole while positioning the spacer instrument between the mucosa and the metal rim of the plate hole. The bar of the middle plate hole is marked to provide midline orientation. 3
Complementary Products Verify that all plate holes are directed away from or placed in-between the tooth roots. Use the bender instrument for in-situ adjustments of the plate holes, if needed. 4 Insert a locking screw into at least every other plate hole while using the spacer instrument to avoid compression on the gingiva. 5 Use the hooks of the locking plates as anchor points to apply the wires between the mandible and maxilla. 6 Universal II System The Leibinger Universal CMF Trauma System represents the next generation of bone fixation for all Craniomaxillofacial fractures, orthognathic, and reconstructive needs. Implant modules for specific anatomical areas Fully customizable for clinician and hospital needs Color coordinated "universal" instrumentation & implants SMARTLock locking technology CMF Customized Implants CMF Customized Implants (CI) are designed specifically for each patient to correct trauma and/or defects in maxillofacial or craniofacial bone. Stryker CI technology offers excellent anatomical fit and contour allowing surgeons to create exceptional cosmetic results. PEEK Customized Cranial Implant Kit is intended to replace bony voids in the cranial and craniofacial skeleton. PEEK MEDPOR Reconstructive Implants MEDPOR Porous Polyethylene Implants provide surgeons with an expanding range of options for reconstruction and augmentation. MEDPOR is a biocompatible, porous polyethylene material. The interconnecting, omni-directional pore structure may allow for fibrovascular in-growth and integration of the patient s tissue. More than 400,000 procedures have been performed with MEDPOR Biomaterial, with more than 350 published clinical reports in cranial, reconstructive, oculoplastic and cosmetic applications. Craniofacial reconstruction and repair of the craniofacial skeleton Implants with titanium mesh embedded in the MEDPOR Biomaterial are designed to help the implant retain its shape when bent and contoured to meet a specific patient defect May be trimmed and cut with surgical scissors. Easily fixated with plates/screws and designed to stay in place Colorado Needle The Colorado Microdissection Needle has an ultra-sharp tip for clean, precise soft tissue dissection. The heat resistant tungsten alloy maintains tip sharpness, and is highly polished for easy cleaning. We offer a wide selection of needle electrodes and standard shaft sizes for use in standard handpieces. Precise electro-cutting and coagulation during electrosurgery
Ordering Information PART NO. DESCRIPTION PART NO. DESCRIPTION 55-02950 SmartLock Hybrid MMF Plate 62-00604 SmartLock Hybrid MMF Bender 50-20596 Locking Screws, SD, 2.0x6mm 62-00605 SmartLock Hybrid MMF Spacer 50-20598 Locking Screws, SD, 2.0x8mm OPTIONAL 50-20358 50-20362 MMF Screws, SD, 2.0x8mm MMF Screws, SD, 2.0x12mm 01-03490 Ligature Wires, Blunt, 0.5x160mm, 24 gauge 01-03492 Ligature Wires, Blunt, 0.64x160mm, 22 gauge 60-16526 Twist Drill 1.6x58mm, 20mm WL, Stryker End 62-20130 2.0/2.3 Screwdriver Blade for Self-Drilling Locking Screws 62-20135 MMF Screwdriver Blade and Grasping Sleeve, Assembled 62-20290 Screwdriver Handle, Ratcheting 62-18330 In-situ Plate Cutter 36-06720 Automatic Wire Twister 15cm 29-20420 SmartLock Hybrid MMF Module with Lid 29-20421 SmartLock Hybrid MMF Inlay 29-20426 SmartLock Hybrid MMF Container Lid, Quarter Size 29-15031 Universal Container, Quarter Size, Two-layer 29-15036 Accessory Tray, Quarter Size 29-15037 Silicone Mat For Accessory Tray, Quarter Size
Ordering Information PART NO. DESCRIPTION PART NO. DESCRIPTION 55-02950 SmartLock Hybrid MMF Plate 62-00604 SmartLock Hybrid MMF Bender 50-20596 Locking Screws, SD, 2.0x6mm 62-00605 SmartLock Hybrid MMF Spacer 50-20598 Locking Screws, SD, 2.0x8mm OPTIONAL 50-20358 50-20362 MMF Screws, SD, 2.0x8mm MMF Screws, SD, 2.0x12mm 01-03490 Ligature Wires, Blunt, 0.5x160mm, 24 gauge 01-03492 Ligature Wires, Blunt, 0.64x160mm, 22 gauge 60-16526 Twist Drill 1.6x58mm, 20mm WL, Stryker End 62-20130 2.0/2.3 Screwdriver Blade for Self-Drilling Locking Screws 62-20135 MMF Screwdriver Blade and Grasping Sleeve, Assembled 62-20290 Screwdriver Handle, Ratcheting 62-18330 In-situ Plate Cutter 36-06720 Automatic Wire Twister 15cm 29-20420 SmartLock Hybrid MMF Module with Lid 29-20421 SmartLock Hybrid MMF Inlay 29-20426 SmartLock Hybrid MMF Container Lid, Quarter Size 29-15031 Universal Container, Quarter Size, Two-layer 29-15036 Accessory Tray, Quarter Size 29-15037 Silicone Mat For Accessory Tray, Quarter Size
Complementary Products Verify that all plate holes are directed away from or placed in-between the tooth roots. Use the bender instrument for in-situ adjustments of the plate holes, if needed. 4 Insert a locking screw into at least every other plate hole while using the spacer instrument to avoid compression on the gingiva. 5 Use the hooks of the locking plates as anchor points to apply the wires between the mandible and maxilla. 6 Universal II System The Leibinger Universal CMF Trauma System represents the next generation of bone fixation for all Craniomaxillofacial fractures, orthognathic, and reconstructive needs. Implant modules for specific anatomical areas Fully customizable for clinician and hospital needs Color coordinated "universal" instrumentation & implants SMARTLock locking technology CMF Customized Implants CMF Customized Implants (CI) are designed specifically for each patient to correct trauma and/or defects in maxillofacial or craniofacial bone. Stryker CI technology offers excellent anatomical fit and contour allowing surgeons to create exceptional cosmetic results. PEEK Customized Cranial Implant Kit is intended to replace bony voids in the cranial and craniofacial skeleton. PEEK MEDPOR Reconstructive Implants MEDPOR Porous Polyethylene Implants provide surgeons with an expanding range of options for reconstruction and augmentation. MEDPOR is a biocompatible, porous polyethylene material. The interconnecting, omni-directional pore structure may allow for fibrovascular in-growth and integration of the patient s tissue. More than 400,000 procedures have been performed with MEDPOR Biomaterial, with more than 350 published clinical reports in cranial, reconstructive, oculoplastic and cosmetic applications. Craniofacial reconstruction and repair of the craniofacial skeleton Implants with titanium mesh embedded in the MEDPOR Biomaterial are designed to help the implant retain its shape when bent and contoured to meet a specific patient defect May be trimmed and cut with surgical scissors. Easily fixated with plates/screws and designed to stay in place Colorado Needle The Colorado Microdissection Needle has an ultra-sharp tip for clean, precise soft tissue dissection. The heat resistant tungsten alloy maintains tip sharpness, and is highly polished for easy cleaning. We offer a wide selection of needle electrodes and standard shaft sizes for use in standard handpieces. Precise electro-cutting and coagulation during electrosurgery
A surgeon must always rely on his or her own professional clinical judgment when deciding whether to use a particular product when treating a particular patient. Stryker does not dispense medical advice and recommends that surgeons be trained in the use of any particular product before using it in surgery. The information presented is intended to demonstrate the breadth of Stryker product offerings. A surgeon must always refer to the package insert, product label and/or instructions for use before using any Stryker product. Products may not be available in all markets because product availability is subject to the regulatory and/or medical practices in individual markets. Please contact your Stryker representative if you have questions about the availability of Stryker products in your area. Stryker Corporation or its divisions or other corporate affiliated entities own, use or have applied for the following trademarks or service marks: Colorado, Leibinger, MEDPOR, SMARTLock, Stryker. All other trademarks are trademarks of their respective owners or holders. Literature Number 9410-400-374-SSP Rev. None Stryker Australia 8 Herbert Street St Leonards NSW 2065 Australia Ph: + 61 2 9467 1000 Fax: + 61 2 9467 1010 Stryker New Zealand 515 Mt Wellington Highway Auckland 1060 New Zealand Ph: + 64 9 573 1890 Fax: + 64 9 573 1891 www.stryker.com Copyright 2012 Stryker Printed in Australia