If you re still using a powder-liquid liner 1 Like VITREBOND... FORGET ABOUT IT.
Introducing GC Fuji LINING LC Paste Pak
GC Fuji LINING LC Paste Pak
GC Fuji LINING LC Paste Pak Radiopaque Light-Cured Glass Ionomer Lining Material
PRODUCT DESCRIPTION Light-Cured Glass Ionomer Lining Material Used as base or liner under composite resin or amalgam restorations Paste-Paste Formulation Bonds well to tooth structure, composite and metal Minimizes sensitivity Provides long-term fluoride release
THE IDEAL DENTIN SUBSTITUTE Flexes and absorbs the stresses caused by polymerization shrinkage, as well as thermal expansion and contraction of composite resin materials. Toothlike coefficient of thermal expansion maintains the marginal integrity. Acts as a thermal insulator.
EXCLUSIVE PASTE PAK DISPENSING SYSTEM Anyone can dispense exact mixing ratio No droplet sizing. No half scoop calculations. No waste. MORE LESS Adjust the metering slide and dispense the exact amount of material needed.
EXCLUSIVE PASTE PAK DISPENSING SYSTEM Squeeze out as little or as much as needed - Paste Pak delivers exact mixing ratio for optimized physical properties. Anyone can get a good mix with Fuji Lining LC Paste Pak.
SIMPLE TO USE AND EASY TO MIX Insert Paste Pak into dispenser - twist into position. Dispense desired amount of material. Replace cap to keep material fresh. Mix with spatula for 10 seconds.
PERFECT MIX EVERY TIME Paste Pak Dispensing System always attains 1.0:1.1 Mix Ratio. Ideal Mix Ratio for best possible physical properties. E h t i l f Enough material for 120-150 applications.
LIGHT-CURES IN 20 SECONDS S Standard Curing Light (470nm) Restoration can be completed Restoration can be completed immediately with amalgam or composite.
EXCELLENT HANDLING Mixed to ideal consistency every time. Does not slump when used as a liner. Spreads easily to level floor or walls of a prepared cavity.
HIGHER FLUORIDE RELEASE Sustained, long-term fluoride release helps prevent secondary caries and recurrent decay. Reduces risk of decay at margins. Fluoride release is recharged with use of fluoridated Fluoride release is recharged with use of fluoridated rinse or dentifrice.
STRONG IONIC BOND Very high bond strength, tensile bond strength and diametral tensile strength. Strong bond to tooth structure, composite resin and metal. Reduces the likelihood of marginal fractures. Optimizes i marginal seal of the final restoration. ti
STRONG IONIC BOND
MINIMIZES SENSITIVITY One of the most predictable methods of preventing postoperative tooth sensitivity. Acts as a thermal insulator. Toothlike coefficient i of thermal expansion maintains i marginal integrity. Low modulus of elasticity enables material to flex and Low modulus of elasticity enables material to flex and absorb stresses.
RADIOPAQUE AND BIOCOMPATIBLE Radiopacity similar to dentin. Completely biocompatible - not irritating to tooth structure, soft tissue or pulp.
STARTER PACKAGE One Fuji Lining LC Paste Pak Cartridge One Mixing Pad One Mixing Spatula. One Paste Pak Dispenser
GC Fuji LINING LC Paste Pak Use as a BASE or LINER under composite resin or amalgam restorations to minimize sensitivity, provide fluoride release and...
...FORGET ABOUT POWDER-LIQUID!
BROCHURE
BROCHURE
ADVERTISEMENT
Radiopaque Light-Cured Glass Ionomer Lining Material
Sure there are a few things we still could use powder-liquid for.