LCP Periprosthetic System. Part of the Synthes locking compression plate (LCP) system. 4.5 mm LCP curved broad plates 5.0 mm periprosthetic locking screws Orthopaedic cable components
LCP Periprosthetic System The LCP Periprosthetic System consists of key instruments from the orthopaedic cable system, the 4.5 mm LCP curved broad plates, and 5.0 mm periprosthetic locking screws, and is intended to treat periprosthetic fractures. 4.5 mm Curved Broad LCP Plates Precontoured to mimic the anterior-posterior bow from the lateral aspect of the femur Tapered, rounded tip facilitates application during minimally invasive surgical procedures Limited-contact design reduces the plate-to-bone contact and the adverse impact on the periosteum A suture hole allows temporary fixation Available with 12 to 26 Combi holes (20 to 26 holes in 2 hole increments) Available in stainless steel or titanium Available sterile or nonsterile Synthes LCP Periprosthetic System
5.0 mm Periprosthetic Locking Screws For use with 4.5 mm LCP plates T25 StarDrive recess Self-tapping flutes Blunt tip allows unicortical fixation of fractures when an intramedullary implant is present Available in 8 mm, 10 mm, 12 mm, 14 mm, and 18 mm lengths Available in stainless steel or titanium Available sterile or nonsterile Locking compression plates (LCP) Combi holes The Combi hole combines a dynamic compression unit (DCU) hole with a locking screw hole. The Combi holes allow placement of conventional cortex and cancellous bone screws on one side or threaded conical locking screws on the opposite side of each hole. This provides the flexibility of conventional screw fixation (such as axial compression) or fixed-angle constructs, and gives the surgeon the ability to handle diverse and difficult fractures with one plating system. Fixed-angle stability Locking screws engaged in the plate create a fixed-angle construct that improves fixation, especially in osteopenic bone and multifragment fractures. When compared to conventional plate-and-screw constructs, the angular and axial stability of locking screws increase the strength of the construct under load and do not require precise anatomical contouring. Load (compression) and neutral screw positions 50 of longitudinal screw angulation 14 of transverse screw angulation Uniform hole spacing Synthes
Indications The Synthes Curved Broad Plates are intended for the fixation of various long bones, such as the humerus, femur and tibia. They are also for use in fixation of periprosthetic fractures, osteopenic bone, and nonunions or malunions. The Synthes 5.0 mm Periprosthetic Locking Screws are intended for fixation of various long bones, such as the humerus, femur and tibia, in conjunction with Synthes locking plates that accept 5.0 mm locking screws. They are also for use in fixation of periprosthetic fractures, osteopenic bone, and fixation of nonunions or malunions. Synthes LCP Periprosthetic System
Instruments 391.104 Large Cable Passer, curved 391.107 Large Cable Passer 391.108 Large Cable Passer, 45 angle 391.201 Cable Tensioner 391.882 Cable Crimper 391.883 Attachment Bit 391.884 Provisional Tensioning Device 391.906 Cable Cutter, large Synthes
LCP Periprosthetic System Stainless Steel (01.225.602) and Titanium (01.225.604) Graphic Case 690.413 Graphic Case, for LCP Periprosthetic System Implants 4.5 mm Curved Broad LCP Plates Stainless Steel Titanium Holes Length (mm) 226.622 426.622 12 229 226.632 426.632 13 247 226.642 426.642 14 265 226.652 426.652 15 282 226.662 426.662 16 300 226.672 426.672 17 318 226.682 426.682 18 336 5.0 mm Periprosthetic Locking Screws, self-tapping, with T25 StarDrive recess, 8 ea. Stainless Steel Titanium Length (mm) 02.221.508 04.221.508 8 02.221.510 04.221.510 10 02.221.512 04.221.512 12 Instruments 391.104 Large Cable Passer, curved 391.107 Large Cable Passer 391.108 Large Cable Passer, 45 angle 391.201 Cable Tensioner, 2 ea. 391.882 Cable Crimper 391.883 Attachment Bit, 4 ea. 391.884 Provisional Tensioning Device, 4 ea. 391.906 Cable Cutter, large Required Sets 115.401 Large Fragment LCP Instrument Set 115.403 Large Fragment LCP Screw Set 146.403 Large Fragment Titanium LCP Screw Set These implants are available nonsterile and sterile-packed. Add S to catalog number for sterile product. Synthes LCP Periprosthetic System
Also Available 4.5 mm Curved Broad LCP Plates, sterile Stainless Steel Titanium Holes Length (mm) 226.702S 426.702S 20 372 226.722S 426.722S 22 408 226.742S 426.742S 24 443 226.762S 426.762S 26 479 Cerclage Buttons, sterile Stainless Steel Titanium 02.221.002S 04.221.002S fits in T15 StarDrive, 2.5 mm hex 02.221.003S 04.221.003S fits in T25 StarDrive, 3.5 mm hex 5.0 mm Periprosthetic Locking Screws, self-tapping with T25 StarDrive recess Stainless Steel Titanium Length (mm) 02.221.514 04.221.514 14 02.221.518 04.221.518 18 Cable with Crimp, 750 mm, sterile Stainless Steel Titanium Diameter (mm) 298.800.01S 498.800.01S 1.0 298.801.01S 611.105.01S* 1.7 4.5 mm Cerclage Positioning Pins, sterile Stainless Steel Titanium 298.803S 498.803S threaded 298.839S 498.839S nonthreaded * Cobalt chromium cable with titanium crimp. These implants are available nonsterile and sterile-packed. Add S to catalog number for sterile product. Synthes
Synthes (USA) 1302 Wrights Lane East West Chester, PA 19380 Telephone: (610) 719-5000 To order: (800) 523-0322 Fax: (610) 251-9056 Synthes (Canada) Ltd. 2566 Meadowpine Boulevard Mississauga, Ontario L5N 6P9 Telephone: (905) 567-0440 To order: (800) 668-1119 Fax: (905) 567-3185 www.synthes.com 2005 Synthes, Inc. or its affiliates. All rights reserved. Combi, LCP and Synthes are trademarks of Synthes, Inc. or its affiliates. Printed in U.S.A. 8/09 J5793-E