Airmid Health Group Limited t/a Airmid Health Laboratory Unit 5, Trinity Enterprise Campus, Grand Canal Quay, Dublin 2 Testing Laboratory Registration number: 284T is accredited by the Irish National Board (INAB) to undertake testing as detailed in the Schedule bearing the Registration Number detailed above, in compliance with the International Standard ISO/IEC 17025:2005 2 nd Edition General Requirements for the Competence of Testing and Calibration Laboratories (This Certificate must be read in conjunction with the Annexed Schedule of ) Date of award of accreditation: 31:05:2011 Date of last renewal of accreditation: 03:02:2016 Expiry date of this certificate of accreditation: 03:02:2021 This shall remain in force until further notice subject to continuing compliance with INAB accreditation criteria, ISO/IEC 17025 and any further requirements specified by the Irish National Board. Manager: Dr Adrienne Duff Chairperson: Issued on 16 January 2014 Mr Tom O Neill Organisations are subject to annual surveillance and are re-assessed every five years. The renewal date on this Certificate confirms the latest date of renewal of accreditation. To confirm the validity of this Certificate, please contact the Irish National Board. The INAB is a signatory of the European co-operation for (EA) Testing Multilateral Agreement (MLA) and the International Laboratory Cooperation (ILAC) Mutual Recognition Arrangement. Edition 7, 19/12/2017 284T Page 1 of 5
Schedule of (Annex to Certificate) Airmid Health Laboratory Chemical TestingLaboratory Initial Registration Date : Postal Address: (Address of other locations as they apply) 31-May-2011 Unit 5, Trinity Enterprise Campus, Grand Canal Quay, Dublin 2 Telephone: +353 (0)1 6336820 Fax: +353 (0)1 6729846 E-mail: Contact Name: Facilities: vmahon@airmidhealthgroup.com Vivienne Mahon Public testing service Edition 7, 19/12/2017 284T Page 2 of 5
Schedule of THE IRISH NATIONAL ACCREDITATION BOARD (INAB) is the Irish body for the accreditation of organisations including laboratories. Laboratory accreditation is available to testing and calibration facilities operated by manufacturing organisations, government departments, educational institutions and commercial testing/calibration services. Indeed, any organisation involved in testing, measurement or calibration in any area of technology can seek accreditation for the work it is undertaking. Each accredited laboratory has been assessed by skilled specialist assessors and found to meet criteria which are in compliance with ISO/IEC 17025 or ISO 15189 (medical laboratories). Frequent audits, together with periodic inter-laboratory test programmes, ensure that these standards of operation are maintained. Testing and Calibration Categories: : Permanent laboratory calibration and testing where the laboratory is erected on a fixed location for a period expected to be greater than three years. Category B: Category C: Category D: Site calibration and testing that is performed by staff sent out on site by a permanent laboratory that is accredited by the Irish National Board. Site calibration and testing that is performed in a site/mobile laboratory or by staff sent out by such a laboratory, the operation of which is the responsibility of a permanent laboratory accredited by the Irish National Board. Site calibration and testing that is performed on site by individuals and organisations that do not have a permanent calibration/testing laboratory. Testing may be performed using (a) (b) (c) (d) portable test equipment a site laboratory a mobile laboratory or equipment from a mobile or site laboratory Standard Specification or Test Procedure Used: The standard specification or test procedure that is accredited is the issue that is current on the date of the most recent visit, unless otherwise stated. Glossary of Terms Facilities: Public calibration/testing service: Conditionally available for public calibration/testing: Normally not available for public calibration/testing: Commercial operations which actively seek work from others. Established for another primary purpose but, more commonly than not, is available for outside work. Unavailable for public calibration/testing more often than not. Laboratory users wishing to obtain assurance that calibration or test results are reliable and carried out to the Irish National Board criteria should insist on receiving an accredited calibration certificate or test report. Users should contact the laboratory directly to ensure that this scope of accreditation is current. INAB will, on request, verify the status and scope. Edition 7, 19/12/2017 284T Page 3 of 5
Scope of t/a Airmid Health Laboratory Chemical Testing Laboratory INAB Classification number (P9) Materials/products tested Sample Type Type of test/properties measured Range of measurement Standard specifications Equipment/techniques used 797.99 Miscellaneous materials and products Other tests Dust Filters Textiles ELISA for quantification of allergen from house dust mites, Dermatophagoides pternonyssinus, in sample extracts (dust, filters and textiles). Range: 1.0-31.25 ng/ml Detection limit: 1 ng/ml SP300 ELISA kit (Indoor Biotechnologies) which is based on Lucyzynska CM et al. A two-site monoclonal antibody ELISA for the quantification of the major Dermatophagoides spp. Allergens, Der p1 and Der f 1. J. Immunol. Methods 1989; 118(2):227-235 Extract Dust based on a standard extraction volume (2.5ml PBST) and a standard weight of dust (0.1g) ELISA for quantification of allergen from domestic cats, Felis domesticus, in sample extracts (dust, filters and textiles). Range: 0.13-8.13 ng/ml. detection limit: 0.13ng/ml 31.25-1.00 ng/ml 8.125-0.13ng/ml 0.781-0.025 µg/g 0.14-0.003µg/g SP301 ELISA kit (Indoor Biotechnologies) which is based on Chapman MD et al. Monoclonal anitbodies to major feline allergen Fel d1. II. Single step affintiy purification of Fel d1, N- terminal sequence analysis, and development of a sensitive two-site immunoassay to assess Fel d1 exposure. J. Immunol 1988: 140 (3):812-818 Fibre Filter Based on a standard extraction volume (4ml PBST) 0.13-0.004 µg TRA 0.03-0.001µg TRA Edition 7, 19/12/2017 284T Page 4 of 5
Scope of t/a Airmid Health Laboratory Chemical Testing Laboratory INAB Classification number (P9) Materials/products tested Sample Type Type of test/properties measured Range of measurement Standard specifications Equipment/techniques used Mitest Filter (>half full) Based on a standard extraction volume (5ml PBST) 0.16-0.01 µg TRA 0.04-0.001 µg TRA Mitest Filter (<half full) - Based on a standard extraction volume (2.5ml PBST) 0.08-0.003 µg TRA 0.02-0.0003µg TRA Appliance Filter (10cm x 15cm size) Based on a standard extraction volume (250ml PBST) 7.81-0.25 µg TRA 2.03-0.03 µg TRA 819.99 Other Materials Airborne samples and sample extracts from filters and hard surfaces Influenza A NCP-ELISA 10.0-156 ng/ml SP600 Influenza A NCP ELISA (Virusys) Edition 7, 19/12/2017 284T Page 5 of 5