DUMONT 0.10 mm x 0.06 mm, No. 11251-20 0.05 mm x 0.02 mm, No. 11252-20 0.10 mm x 0.06 mm, No. 11251-30 0.05 mm x 0.02 mm, No. 11252-30 0.10 mm x 0.06 mm, Dumostar, No. 11295-00 0.08 mm x 0.04 mm, cannot be autoclaved, Carbon, No. 11251-10 0.05 mm x 0.02 mm, Dumostar, No. 11295-10 0.05 mm x 0.02 mm, Titanium, No. 11252-40 Dumont #5SF Same as the #5 forceps but with the finest tips ever produced by Dumont. Super Fine Tip, 0.025 mm x 0.005 mm, No. 11252-00 Dumont #5 Fine Tips The tips are expertly finished under 40x magnification and polished on the inside. The shanks are shaped so that the tips close flat for 3 mm and therefore are less likely to open under excess pressure. 0.05 x 0.01mm No. 11254-20 Ceramic Coated Dumont #5 Provides no reflection while working under the microscope. The scratch and corrosive resistant coating guarantees a long lasting pair of forceps. 0.05 mm x 0.01 mm, Inox with ceramic coating, No. 11252-50 Dumont #5 Bevelled, very fine shanks for best visibility Additional Information: For information on Dumont special alloys and tip styles, see page 95. For sharpening stones designed for Dumont forceps, see page 128 and 129. For information on Titanium see page 5. PRICES SHOWN IN THIS CATALOG ARE IN US CURRENCY SEE INSIDE FRONT COVER FOR ORDERING INFORMATION 87
Dumont microsurgery forceps with microblunted, atraumatic tips Dumont #L5 Outils Dumont S.A., Switzerland, has supplied their regular forceps to the research and medical professions for many years. Now, in design collaboration with a foremost European supplier of microvascular instruments, Dumont puts their over one-hundred years of experience with hand fashioned tools into these precision instruments. The sides of these forceps are distinctively ribbed providing a better holding surface for maximum control of the instrument. The shanks are arched toward each other to transmit more holding strength to the points. The smooth inside surfaces at the tips will, with gentle pressure, close flat for 5 mm, increasing the total holding area considerably. The microscopically matched tips are gently blunted to prevent tissue puncture. The Inox steel alloy optimizes both stain resistance and hardness. From the middle of the shank to the tips of the instrument the inside and outside surfaces are highly finished under the microscope. These special microsurgery forceps are also recommended as micro needle holders because of their gently blunted, atraumatic tips. Medical #5, Straight tip, 0.10 x 0.06 mm, No. 11253-20 Medical #5/45, 45 tip, 0.10 x 0.06 mm, No. 11253-25 Medical #5A, Off-center tip, 0.13 x 0.08 mm, 11.5 cm No. 11253-21 No. 11253-20 Medical #7, Curved tip, 0.17 x 0.10 mm, Inox, 11.5 cm No. 11273-20 Medical #5/90, 90 tip, 0.10 x 0.06 mm, No. 11253-29 Medical #7S, Short curve tip, 0.17 x 0.10 mm, No. 11273-22 Dumont #5 Inox microdissection forceps, with slide for holding tips together so that specimens may be securely held and retained. Slide may also be locked in place so that forceps can be used in regular fashion. With gently blunted, atraumatic tips, fully autoclavable. Tip 0.10 x 0.06 mm, No. 11253-27 88 USA 1-800-521-2109 CANADA 1-800-665-5355 GERMANY +49 (0) 62 21 90 50 50 FINESCIENCE.COM
DUMONT Dumont #5 Mirror Finish Forceps Dumont #5CO Dumont #55 Bevelled, as #5 but with extra light and fine shanks Dumont #5XL The last 5 mm of the inside of the tips are highly polished to reduce tissue sticking to the forceps. Ideal for embryos, nerves, or any other adhesive tissue. The mirror finish handle is an identifying mark. 0.10 x 0.06 mm, Inox No. 11251-23 0.05 x 0.02 mm, Inox No. 11252-23 Similar to the number #5 forceps but designed specially for extra precise work. The entire forceps have been honed down to make this the lightest and most precise Dumont forceps available. 0.05 mm x 0.01 mm, Dumostar No. 11295-20 0.05 mm x 0.02 mm, No. 11255-20 0.05 mm x 0.02 mm, Dumostar, No. 11295-51 Longer version of the #5 microsurgery forceps, 0.10 x 0.06 mm 15 cm No. 11253-10 PRICES SHOWN IN THIS CATALOG ARE IN US CURRENCY SEE INSIDE FRONT COVER FOR ORDERING INFORMATION 89
Dumont #5/45 45 tips for improved visibility and control Dumont #5/45 Cover Slip Forceps Teflon Coated Dumont #5 Dumont #4 Similar to #5, but with broader shanks 400% 0.13 mm x 0.08 mm, No. 11241-30 0.10 mm x 0.06 mm, No. 11251-35 Designed to pick up cover slips out of multi-well plates. The bottom tip is biologie thin for easier insertion. The tip width is squared for a better grip. 1 mm from tip to bend, Upper tip: 0.10 x 0.08 mm, Lower tip: 0.10 x 0.02 mm, 11.5 cm No. 11251-33 Teflon coated #5 forceps, anti-magnetic, ideal for use in cryogenic environments and for EM samples. Tip 0.10 mm x 0.06 mm, No. 11626-11 0.06 mm x 0.04 mm, No. 11242-40 0.13 mm x 0.08 mm, Dumostar, No. 11294-00 90 USA 1-800-521-2109 CANADA 1-800-665-5355 GERMANY +49 (0) 62 21 90 50 50 FINESCIENCE.COM
DUMONT Dumont #7 Fine Tips The tips are expertly finished under 40x magnification and polished on the inside. The shanks are shaped so that the tips close flat for 3 mm and therefore are less likely to open under excess pressure. Dumont #7 Large radius curved shanks Ceramic Coated Dumont #7 Dumont #7b Dumont #6 Sharply angled tips for access to difficult areas 0.17 mm x 0.10 mm, 11.5 cm No. 11271-30 0.07 mm x 0.04 mm, 11.5 cm No. 11272-30 0.07 mm x 0.04 mm, Titanium, 11.5 cm No. 11272-40 0.17 mm x 0.10 mm, Dumostar, 11.5 cm No. 11297-00 0.07 x 0.03 mm, No. 11274-20 0.07 mm x 0.04 mm, Dumostar, 11.5 cm No. 11297-10 0.07 mm x 0.04 mm, Inox with ceramic coating, 11cm No. 11272-50 Standard tip with serrations, 0.17 mm x 0.10 mm, No. 11270-20 0.17 mm x 0.10 mm, 11.5 cm No. 11260-30 For more information on titanium, see page 5. PRICES SHOWN IN THIS CATALOG ARE IN US CURRENCY SEE INSIDE FRONT COVER FOR ORDERING INFORMATION 91
Dumont Self-Closing Forceps Ideal for lifting and holding EM grids. They also have many other applications where consistent pressure at the tips is important. Correctly tensioned cross-over stainless steel shanks come to a microscopically matched point. Dumont #3 Tapered and especially sturdy shanks Biologie tip with medium tension, 0.08 mm x 0.04 mm, 11.5 cm No. 11261-30 0.10 mm x 0.06 mm, No. 11262-30 0.20 mm x 0.12 mm, 11.5 cm No. 11267-30 0.17 mm x 0.10 mm, No. 11231-20 0.17 mm x 0.10 mm, No. 11231-30 0.17 mm x 0.10 mm, Dumostar, No. 11293-00 92 USA 1-800-521-2109 CANADA 1-800-665-5355 GERMANY +49 (0) 62 21 90 50 50 FINESCIENCE.COM
DUMONT Dumont SS Forceps with a very special feel. They have strong, thick shanks falling off sharply to points of 0.10 mm x 0.06 mm. The tips are smooth on the inside for a gentle grip. Applying full strength will not separate tips and a strong hold on the smallest specimen is assured. Dumont #45 Dumont Ceramic Tipped Forceps Dumont AA 45 angle, tip 0.20 x 0.12 mm, 13.5 cm No. 11203-25 Delicate pattern straight tip, 0.20 x 0.12 mm, 13.5 cm No. 11203-23 13.5 cm No. 11200-33 Standard tip with serrated grip, 0.20 mm x 0.12 mm, No. 11245-30 Ceramic is six times harder than stainless steel so the tip will hold its geometry better than other forceps. It is also static-free, electromagnetic discharge safe without carbon/metal additives, chemically inert, and working temperature resistant to 1500 C. Tip size 0.4 mm x 0.2 mm. 13.5 cm No. 11210-60 Replacement tips for 11210-60 No. 11210-61 Sold only by the dozen. Not available individually. Slip-proof acid and electric shock resistant epoxy coating covering 17.5 mm from the tips, 0.4 mm x 0.2 mm, Inox 12.5 cm No. 11210-10 Polished Inox alloy without epoxy covering. 12.5 cm No. 11210-20 PRICES SHOWN IN THIS CATALOG ARE IN US CURRENCY SEE INSIDE FRONT COVER FOR ORDERING INFORMATION 93
Dumont #2 Mouse Laminectomy Forceps Epoxy Coated Dumont #2AP Dumont Mini Forceps Style 3, 0.12 mm x 0.07 mm, 7 cm No. 11200-10 Style 4, 0.14 mm x 0.06 mm, 7 cm No. 11200-12 Style 5, 0.09 mm x 0.05 mm, 8.2 cm No. 11200-14 O-Rings for Forceps These forceps can be used to break off delicate bone during mouse laminectomies, as well as fine skull bone removal. 0.40 x 0.02 mm, No. 11223-20 These epoxy covered forceps provide good insulation for up to 220 AC voltage work and show high imperviousness to chemical solutions. Low transmittance of cold makes them ideal for work with frozen sections. Super cold sections will not adhere to the gripping surfaces. Tips 1.5 mm wide, No. 11220-21 These rubber o-rings fit our Dumont forceps and keep them closed with variable degrees of pressure on the tips. Pkg. of 10 No. 11200-00 94 USA 1-800-521-2109 CANADA 1-800-665-5355 GERMANY +49 (0) 62 21 90 50 50 FINESCIENCE.COM
DUMONT When choosing Dumont forceps, consider: 1. The style and shape of forceps you want 2. The fineness of the tips you require 3. The alloy best suited to your work Styles Dumont forceps come in a wide variety of shapes and sizes, from the world famous straight #5 to the extremely popular curved #7. Below you will find a brief description of the most popular styles. Dumont 2: Straight forceps with wide but thin tips often referred to as Mouse Laminectomy Forceps because of their popularity for breaking off delicate bone during mouse laminectomies. Dumont 3: Long straight forceps with course tips. Very popular in low magnification procedures or where longer, thicker forceps are needed. Dumont 4: Straight forceps very similar to the #5 but with broader shanks and a slightly courser tip. Dumont 5: The most popular style of Dumont straight forceps with fine tips which come in several styles including #55, #5CO, #5SF, #5XL and #5/45. 55: Similar to #5 but with lighter shanks which give the forceps a lighter spring action. 5CO: Similar to #55 but with even finer shanks producing the lightest spring action and longest meeting surface of any Dumont. 5SF: Standard #5 but with the finest tips ever produced by Dumont. 5XL: Similar to #5 but longer. 5/45: Standard #5 but angled 45. Dumont 6: Sharply angled forceps with courser tips. Perfect for access to difficult areas. Dumont 7: Large radius, curved forceps with fine tips. The most popular curved style. Medical: Available in almost any style. Denotes distinctive ribbing in the handle to maximize grip. Tip Profiles Once you have decided which style Dumont is right for you, choose the right tip profile for your application. While not all styles come in all tip profiles, below is a guide to help you decide which is right for you. The dimensions of these tips vary with each style. For specific dimensions please see each item. Standard The standard Dumont tips are designed for the most exacting work under the microscope. In general, standard tips are used under magnification up to 20X. Biologie The imprint Biologie identifies forceps especially produced for the biological sciences. In overall shape and dimension these forceps are identical in style but have the added feature of tips which are approximately twice as fine. Dumont s finest tips We are frequently asked for the Dumont forceps with the finest tip. These forceps are four times finer than Biologie tipped Dumonts. Please see page 87 and 91 for these items. Alloys Now that you have selected the right style and tip of forceps, you can move on to picking the right alloy for your application. Carbon Will stand hard use of the tips but has the disadvantages of staining easily, not being autoclavable, and being highly magnetic. Inox Is an alloy which has a certain amount of chromium added to carbon steel. This results in some loss of hardness but offers good stainless qualities. Inox forceps are magnetic. Dumoxel Is a patented Dumont alloy which provides optimal stainless steel features while still retaining adequate hardness. This combination makes it the most requested type of metal in Dumont forceps. Dumoxel is nonmagnetic. Titanium Forceps have several distinct advantages. They are fully corrosion resistant. For instance, salt water is non-reactive to this alloy. Although not as hard as it is a more flexible metal. It is also 40% lighter than stainless steel and 100% nonmagnetic. Dumostar After years of research and testing, Dumont has developed this advanced alloy for the express purpose of maintaining fine tips. Made of 40% cobalt, Dumostar is much more durable and elastic than the best stainless steels. It has a very high resistance to corrosive solvents such as sea water and strong acids and also has a temperature resistance of up to 550 C (1022 F). FST has tested Dumont s alloys in everyday use by some of our best customers and found Dumostar forceps to last, on average, four times longer than Dumoxel and Inox. We believe that, despite its higher initial cost, Dumostar is the most cost effective alloy for the research lab. Dumostar forceps are nonmagnetic. PRICES SHOWN IN THIS CATALOG ARE IN US CURRENCY SEE INSIDE FRONT COVER FOR ORDERING INFORMATION 95
The Most Finely Executed Points Produced Anywhere! Two of the most popular forceps are Nos. 11370-40 and 11370-42. They have the most finely executed points available on forceps. They are extremely light and superbly balanced. The spring action is gentle to provide an extended fatigue-free working period. The shanks are slim for better visibility and arched in such a way as to extend the maximum force to the tips. The tips close flat for 6 mm from the points to give a larger than usual holding area. The tips themselves have been expertly finished under the microscope at 40x magnification. Nos. 11399-80 and 11399-87 are extra delicate for precision microsurgery or dissection. The bottom part, which provides gentle spring action, is also slim to reduce weight. The grip portion is built up to give the right weight to the fingers. The holes provide a good finger-hold and also help to reduce weight. The tips have been finished to exceptional fineness under 40x magnification. MORIA MC40, No. 11370-40 Curved, MORIA MC40/B, No. 11370-42 MORIA 9980, 13 cm No. 11399-80 Curved, MORIA 9987, 13 cm No. 11399-87 96 USA 1-800-521-2109 CANADA 1-800-665-5355 GERMANY +49 (0) 62 21 90 50 50 FINESCIENCE.COM
MORIA Delicate MORIA Forceps These forceps are made from a special alloy of Swedish steel to give them strength, flexibility and lightness. The various patterns are designed to give added ease of operation. Length, balance, spring action and type of tip are perfectly matched. The forceps on this page have the inside tip surfaces either smooth or with atraumatic micro-serrations. All tips are 0.5 mm and blunt. Micro-serrations, MORIA MC31, No. 11370-31 Smooth, MORIA MC31/B, No. 11373-12 Micro-serrations, MORIA MC32, No. 11370-32 Smooth, MORIA MC32/B, No. 11373-22 PRICES SHOWN IN THIS CATALOG ARE IN US CURRENCY SEE INSIDE FRONT COVER FOR ORDERING INFORMATION 97
SuperGrip Forceps The tips are processed with MicroCrystals, a method developed by S&T to infuse tungsten carbide on stainless steel. The formation of this ultra-fine coating will guarantee atraumatic handling of tissue while improving the grip dramatically. The inset illustrates the gripping surface similar to a match head. The recommended use is where forceps are utilized as needle holders or when slippery tissues might be encountered. Pierse Fixation Forceps Tip width 0.3 mm x 0.25 mm, straight, No. 00108-11 Tip width 0.3 mm x 0.25 mm, angled 45, No. 00109-11 Tip width 0.3 mm x 0.25 mm, straight, No. 00632-11 Tip width 0.3 mm x 0.25 mm, angled 45, No. 00649-11 For exceptional gripping power with no damage to sclera, vascular sheath and epineurium. Has minute tissue retention hole of 0.3 mm. behind tips. Flat gripping surfaces are 0.1 x 0.4 mm. 13 cm No. 18155-13 98 USA 1-800-521-2109 CANADA 1-800-665-5355 GERMANY +49 (0) 62 21 90 50 50 FINESCIENCE.COM
FINE The platform depicts the usable area with guaranteed parallel closure. In this way a reliable grip on sutures can be ensured. 5 mm Suture Tying Forceps Flat handle, 9 mm wide. Tip diameter 0.3 mm with tying platform, 13.5 cm No. 00272-13 Suture Tying Forceps with tip of 0.5 mm, 5 mm long tying platform, with stop to prevent too much pressure being applied, No. 18025-10 Vetro Grasping Forceps Serrated, tip diameter 0.7 mm, 14 cm No. 11900-14 EVO Forceps tip diameter 0.5 mm 15 cm No. 11800-00 EVO Forceps Curved, tip diameter 0.5 mm 15 cm No. 11800-01 The EVO Series An evolutionary series of ergonomic instruments which are lighter than titanium but still have all the benefits of stainless steel. The fully fenestrated spring body is designed with a stability rod to provide balance in your hand. PRICES SHOWN IN THIS CATALOG ARE IN US CURRENCY SEE INSIDE FRONT COVER FOR ORDERING INFORMATION 99
Tip width 0.5 mm Tip width 0.3 mm 20x magnification serrated, 7 cm No. 11064-07 1x2 teeth, 7 cm No. 11084-07 Serrated, 8.5 cm No. 11069-08 Tip width 0.4 mm Tip width 0.6 mm 1x2 teeth, 7 cm No. 11066-07 10x magnification 5 mm Curved, serrated, 7 cm No. 11065-07 Smooth, 7 cm No. 11083-07 1x2 teeth, 8.5 cm No. 11070-08 Model Bonn. The 1x2 forceps are by far the finest of their kind available. The teeth are only 0.1 mm wide and fit perfectly into each other. The smooth version features a very narrow 5 mm long platform. Delicate, smooth tips, angled 45, 9 cm No. 11063-07 Bishop-Harman. These forceps are provided with holes in the handles to make them extra light and to ensure a good grip. The tips are 0.5 mm wide, either delicately rounded with microserrations, or with 1x2 teeth, angled upward as shown. Curved, 1x2 teeth, 7 cm No. 11067-07 100 USA 1-800-521-2109 CANADA 1-800-665-5355 GERMANY +49 (0) 62 21 90 50 50 FINESCIENCE.COM
FINE Eye dressing forceps, serrated, tip width 0.8 mm 9.5 cm No. 11040-08 Curved, 9.5 cm No. 11041-08 Tip width 1mm The tips of these forceps arch toward each other, closing flat on a surface 1.3 mm wide x 0.2 mm high. A bar inside the shanks limits pressure applied. Exceptional gripping power is possible with minimal damage to tissue. 1.3 mm 3 mm Eye tissue forceps, with 1x2 teeth 0.8 mm 1 mm 9.5 cm No. 11042-08 Curved, 9.5 cm No. 11043-08 The octagon shaped grip on these forceps provides a particularly secure finger hold for the tough, yet delicate job. With sliding lock, smooth tips, straight, No. 11062-10 No. 11071-10 PRICES SHOWN IN THIS CATALOG ARE IN US CURRENCY SEE INSIDE FRONT COVER FOR ORDERING INFORMATION 101
Plastic Forceps These low cost fine plastic forceps are made of Acetyl. They are nonmagnetic, acid resistant and are able to withstand temperatures up to 464 F (240 C). Tips do not spread under pressure. Overall Length 11.5 cm Package of 10. Cover Glass Forceps 4 mm 10 mm 5 mm Sharp straight, 0.40 mm x 0.25 mm, Pkg. of 10 No. 11700-00 Round straight, 1.5 mm x 0.40 mm, Pkg. of 10 No. 11700-03 Sharp curved, 0.30 mm x 0.20 mm, Pkg. of 10 No. 11700-01 Round curved, 1.5 mm x 0.40 mm, Pkg. of 10 No. 11700-04 Sharp 45, 0.30 mm x 0.20 mm, Pkg. of 10 No. 11700-02 Angled, 10.5 cm No. 11073-10 10.5 cm No. 11074-02 Cross action tissue transport forceps with gentle action, closing flat on 4 mm wide and 8 mm deep. Inside surfaces are finely serrated. No. 11075-00 102 USA 1-800-521-2109 CANADA 1-800-665-5355 GERMANY +49 (0) 62 21 90 50 50 FINESCIENCE.COM
STANDARD Ring Forceps Ring forceps for transport of tissue and organs. Live Insect Handling Forceps Very delicate live insect handling forceps of18/8 stainless steel. 1 mm ID, 1.5 mm OD, with limit screw, 8.5 cm No. 11101-09 2.2 mm ID, 3 mm OD, with limit screw, 9 cm No. 11103-09 4.8 mm ID, 6 mm OD, with limit screw, 9 cm No. 11106-09 Narrow, No. 26029-10 Wide, No. 26030-10 PRICES SHOWN IN THIS CATALOG ARE IN US CURRENCY SEE INSIDE FRONT COVER FOR ORDERING INFORMATION 103
Micro-Adson. Our more delicate version of the popular Adson forceps, with tip width of 0.8 mm. Micro-Adson forceps with fenestrated handle. Our delicate Micro-Adson forceps, with five windows to aid in stability and easy finger adjustments. Adson forceps. Wide, strong grip with narrow, finely serrated tips 1.5 mm wide. Serrated, No. 11006-12 1.5 mm dia. Serrated, No. 11018-12 Serrated, No. 11020-12 1x2 teeth, No. 11027-12 1x2 teeth, No. 11019-12 tungsten carbide inlaid tip, No. 11506-12 For more information on tungsten carbide see page 19. 104 USA 1-800-521-2109 CANADA 1-800-665-5355 GERMANY +49 (0) 62 21 90 50 50 FINESCIENCE.COM
STANDARD Adson pattern, straight, with DeBakey serrations, 12.5 cm No. 11617-12 Adson-Brown, shark teeth, No. 11627-12 with DeBakey serrations, 15 cm No. 11616-15 Atraumatic DeBakey Serrations This tooth pattern, as shown, consists of one row of atraumatic teeth meshed with two opposite rows of atraumatic teeth. These two forceps are ideal for gentle and atraumatic gripping of vessels, tissue and other delicate structures. Adson-Graefe tissue forceps. Good hand grip on a light forceps; fine sharp teeth over 4.5 mm width, 12.5 cm No. 11030-12 PRICES SHOWN IN THIS CATALOG ARE IN US CURRENCY SEE INSIDE FRONT COVER FOR ORDERING INFORMATION 105
Eye dressing forceps, serrated, tip width 0.8 mm Eye dressing forceps, serrated, tip width 0.5 mm No. 11150-10 No. 11151-10 No. 11152-10 No. 11050-10 No. 11051-10 No. 11052-10 No. 11049-10 Tip width 1.2 mm Eye tissue forceps, 1x2 teeth, tip width 0.5 mm Titanium, No. 11650-10 Titanium, No. 11651-10 Titanium, No. 11652-10 Eye tissue forceps, 1x2 teeth, tip width 0.8 mm For more information on titanium, see page 5. No. 11153-10 No. 11154-10 No. 11155-10 No. 11053-10 No. 11054-10 No. 11055-10 Extra Fine Graefe Forceps This version of the Graefe forceps is similar to the standard pattern with the exception that it is lighter and finer. The width of the tips is only 0.5 mm instead of the regular 0.8 mm. They are well suited for a variety of situations where light, fine, forceps are required. Graefe Forceps The Graefe forceps are one of the most popular forceps for fine surgical procedures. They have a delicate pattern with an overall length of and 0.8 mm wide tips. Finely serrated or with fine 1x2 teeth and gentle spring action. 106 USA 1-800-521-2109 CANADA 1-800-665-5355 GERMANY +49 (0) 62 21 90 50 50 FINESCIENCE.COM
STANDARD Semken. Forceps are slim patterned with long, narrow shanks and finely serrated tips 1.3 mm and 1.7 mm wide. The spring action is gentle. Narrow pattern. Forceps have serrated tips 2 mm to 3.6 mm wide depending on length of instrument. Lighter spring action than standard pattern for grasping more delicate tissue. Standard pattern. Broad pattern forceps with serrated tips 2.5 mm to 4 mm wide depending on length of instrument. Strong spring action. Straight Curved Straight Curved Straight Curved Length cm Straight Price 13 11008-13 15 11008-15 Length cm Straight Price 12 11002-12 13 11002-13 14.5 11002-14 Length cm Straight Price 12 11000-12 13 11000-13 14.5 11000-14 16 11002-16 16 11000-16 18 11002-18 18 11000-18 15 11608-15 20 11002-20 20 11000-20 For more information on titanium, see page 5. 25 11002-25 25 11000-25 30 11000-30 14.5 11602-14 Length cm Curved Price Length cm Curved Price Length cm Curved Price 13 11009-13 15 11009-15 12 11003-12 13 11003-13 14.5 11003-14 16 11003-16 18 11003-18 20 11003-20 12 11001-12 13 11001-13 14.5 11001-14 16 11001-16 18 11001-18 20 11001-20 PRICES SHOWN IN THIS CATALOG ARE IN US CURRENCY SEE INSIDE FRONT COVER FOR ORDERING INFORMATION 107
3 mm 2 mm Length cm 1x2 Price 2x3 Price Slim, 1x2 Price 10 11023-10 12 11021-12 11023-12 14.5 11021-14 11022-14 11023-14 15.5 11021-15 11022-15 11023-15 Strong forceps. Curved, 1x2 teeth, used with rongeur No. 16021-14 (see page 36) in laminectomy to securely hold spinal column, 14 cm No. 11029-14 108 USA 1-800-521-2109 CANADA 1-800-665-5355 GERMANY +49 (0) 62 21 90 50 50 FINESCIENCE.COM
STANDARD 6 mm 1.5 mm 2 mm 11 mm Gillies. 1x2 teeth, straight, with serrations, 15 cm No. 11028-15 Russian. With special cupped pattern for superior grip, 15 cm No. 11026-15 Organ holding forceps. With thumb screw, 14.5 cm No. 11031-15 PRICES SHOWN IN THIS CATALOG ARE IN US CURRENCY SEE INSIDE FRONT COVER FOR ORDERING INFORMATION 109
16 mm For more information on titanium, see page 5. 18 cm No. 11014-18 Curved, 18 cm No. 11015-18 Angled, 16 cm No. 11080-02 16 cm No. 11602-16 Gerald Forceps With serrated, slightly rounded tips, very narrow shanks to 2.5 cm from tips, and a tip width of 1.4 mm. 110 USA 1-800-521-2109 CANADA 1-800-665-5355 GERMANY +49 (0) 62 21 90 50 50 FINESCIENCE.COM
STANDARD Taylor Forceps. Slim design with tips 1.5 mm wide. Serrated and smooth versions available. Mouse Handling Forceps Prevents injuries while handling small rodents. serrated tips, 17 cm No. 11010-17 with 1x2 teeth, 18 cm No. 11024-18 serrated, 18 cm No. 11012-18 Curved, serrated tips, 17 cm No. 11011-17 21 cm No. 11012-21 25 cm No. 11012-25 smooth tips, 17 cm No. 11016-17 Curved, smooth tips, 17 cm No. 11017-17 Curved, with 1x2 teeth, 18 cm No. 11025-18 Curved, serrated, 18 cm No. 11013-18 21 cm No. 11013-21 80% actual size The smooth tipped forceps are easier to clean than serrated tips, making them ideal for use in situations where tissue or paraffin would tend to adhere to serrations. Potts-Smith Forceps serrated, tip width 2 mm x 1.6 mm Long handles prevent injury from bites and make picking up small rodents easy. Serrated rubber gripping surface (15 mm x 20 mm) for maximum hold and minimal trauma. 21 cm No. 11035-20 PRICES SHOWN IN THIS CATALOG ARE IN US CURRENCY SEE INSIDE FRONT COVER FOR ORDERING INFORMATION 111