17065:2012 to provide product conformity certification Unit 1 Pendle Place Skelmersdale West Lancashire WN8 9PN Contact: Mr Simon Barrowcliff Tel: +44 (0)1695 556666 Fax: +44 (0)1695 557077 E-Mail: Simon.Barrowcliff@element.com Website: www.element.com Locations where certification activities covered by the above Accreditation are undertaken Unit 1 Pendle Place Skelmersdale West Lancashire WN8 9PN Assessment Manager: GC Page 1 of 13
DETAIL OF ACCREDITATION s components and systems intended for use in and in conjunction with potentially explosive atmospheres Conformity with standards applicable to the explosion safety of such products, components and systems General requirements IEC 60079-0:2011 (Edition 6) EN 60079-0:2012 + A11/2013 IEC 60079-0:2007 (Edition 5) EN 60079-0:2009 IEC 60079-0:2004 (withdrawn) EN 60079-0:2006 (withdrawn) EN 50014:1997 (withdrawn) Flameproof enclosures d IEC 60079-1:2014 (Edition 7) EN 60079-1:2014 IEC 60079-1:2007 (Edition 6) EN 60079-0:2007 IEC 60079-1:2003 (withdrawn) EN 50018:2000 (withdrawn) Pressurised apparatus p IEC 60079-2:2014 (Edition 6) EN 60079-2:2014 IEC 60079-2 Ed5 (2007) EN 60079-2:2007 IEC 60079-2:2007 (Edition 5) EN 60079-2:2007 EN 60079-2:2004 (withdrawn) EN 50016:2002 (withdrawn) Assessment Manager: GC Page 2 of 13
Oil immersion o IEC 60079-6:2007 (Edition 3) EN 60079-6:2007 Increased safety e IEC 60079-7:2015 (Edition 5) EN 60079-7:2015 IEC 60079-7:2006 (Edition 4) EN 60079-7:2007 EN 60079-7:2003 (withdrawn) EN 50019:2000 (withdrawn) Intrinsic safety i IEC60079-11:2011 (Edition 6) EN 60079-11:2012 IEC 60079-11:2006 (Edition 5) EN 60079-11:2007 EN 50020:2002 (withdrawn) Equipment protection by pressurized room 'p' IEC 60079-13:2010 (Edition 1) EN 60079-13:2010 Type of protection n IEC 60079-15:2010 (Edition 4) EN 60079-15:2010 IEC 60079-15:2005 (Edition 3) EN 60079-15:2005 EN 60079-15:2003 (withdrawn) EN 50021:1999 (withdrawn) Assessment Manager: GC Page 3 of 13
Encapsulation 'm' IEC 60079-18:2015 (Edition 4) EN 60079-18:2015 IEC 60079-18:2009 (Edition 3) EN 60079-18:2010 IEC 60079-18:2004 (Edition 2) EN 50028:1987 (withdrawn) Equipment with equipment protection level (EPL) Ga IEC 60079-26:2006 (Edition 2) EN 60079-26:2007 Protection of equipment and transmission systems using Optical Radiation IEC 60079-28:2015 (Edition 2) EN 60079-28:2015 IEC 60079-28:2015 Ed 2.0 IEC 60079-28:2006 (Edition 1) EN 60079-28:2007 Non-electrical equipment for explosive atmospheres Basic method and requirements ISO 80079-36:2016 EN ISO 80079-36:2016 Non-electrical equipment for explosive atmospheres Non electrical type of protection constructional safety c, control of ignition source b, liquid immersion k ISO 80079-37:2016 EN ISO 80079-37:2016 Protection by enclosure t IEC 60079-31:2013 (Edition 2) EN 60079-31:2014 IEC 60079-31:2008 (Edition 1) EN 60079-31:2009 Electrical Apparatus for use in dust atmospheres General requirements IEC 61241-0:2004 (Edition 1) Assessment Manager: GC Page 4 of 13
Protection by enclosure td IEC 61241-1:2004 (Edition 1) EN 50281-1-1:1999 (withdrawn) Protection by purge and pressurisation pd IEC 61241-4:2001 (Edition 1) Protection by intrinsic safety id IEC 61241-11:2005 (Edition 1) Protection by encapsulation md IEC 61241-18:2004 (Edition 1) Non Electrical Equipment General Requirements EN 13463-1:2009 EN 13463-1:2001 Protection by constructional safety c EN 13463-5:2011 EN 13463-5:2003 (withdrawn) Protection by control of ignition source 'b' EN13463-6:2005 Protection by liquid immersion 'k' EN13463-8:2003 Potentially explosive atmospheres. Application of quality systems EN ISO IEC 80079-34:2011 EN 13980:2002 (withdrawn) Electrical and Electronic Equipment Conformity with standards applicable to the Electrical and Electronic Equipment Audio, video and similar electronic apparatus IEC 60065:2014 (Edition 8) EN 60065:2014 Assessment Manager: GC Page 5 of 13
Audio, video and similar electronic apparatus (cont d) IEC 60065:2001 + A2:2010 (Edition 7.2) EN 60065:2002 + A12:2011 Electrical equipment for measurement, control and laboratory use IEC 61010-1:2010 (Edition 3) EN 61010-1:2010 IEC 61010-1:2001 (Edition 2) Heating appliances - laboratory IEC 61010-2-010:2014 (Edition 3) EN 61010-2-010:2014 IEC 61010-2-010:2003 (Edition 2) EN 61010-2-010:2003 Particular requirements for testing and measuring circuits IEC 61010-2-030:2010 (Edition 1) EN 61010-2-030:2010 Automatic and semi-automatic laboratory equipment for analysis IEC 61010-2-081:2015 (Edition 3) EN 61010-2-081:2015 IEC 61010-2-081:2001 + A1:2003 (Edition 2.1) EN 61010-2-081:2002 In vitro diagnostic (IVD) medical equipment IEC 61010-2-101:2015 (Edition 2) IEC 61010-2-101:2002 (Edition 1) EN 61010-2-101:2002 Household and Similar Electrical Appliances general requirements IEC 60335-1:2010 + A1:2013 (Edition 5.1) EN 60335-1:2012 + A11:2014 IEC 60335-1:2004 + A2:2013 (Edition 4.2) EN 60335-1:2004 + A15:2011 Particular requirements for vacuum cleaners and water-suction cleaning appliances IEC 60335-2-2:2009 + A1:2012 (Edition 2.1) EN 60335-2-2:2009 + A1:2012 Assessment Manager: GC Page 6 of 13
Hair dryers IEC 60335-2-23:2002 + A2:2012 (Edition 2.2) EN 60335-2-23:2003 + A2:2012 Battery chargers IEC 60335-2-29:2002 + A2:2009 (Edition 4.2) EN 60335-2-29:2004 + A2:2010 Water heaters IEC 60335-2-35:2002 + A2:2011 (Edition 4.2) EN 60335-2-35:2003 + A2:2011 Wet and Dry Vacuum Cleaners (excluding floor IEC 60335-2-69:2012 (Edition 4) scrubbing apparatus) EN 60335-2-69:2012 Particular requirements for floor treatment machines for commercial use IEC 60335-2-67:2012 (Edition 4) EN 60335-2-67:2012 Particular requirements for spray extraction machines, for commercial use IEC 60335-2-68:2012 (Edition 4) EN 60335-2-68:2012 Automatic Machines for Floor Treatment IEC 60335-2-72:2012 (Edition 3) EN 60335-2-72:2012 Fans IEC 60335-2-80:2002 + A2:2008 (Edition 2.2) EN 60335-2-80:2003 + A2:2009 Service machines and amusement machines IEC 60335-2-82:2002 (Edition 2) EN 60335-2-82:2002 Information technology equipment IEC 60950-1:2005 + A2:2013 (Edition 3.2) EN 60950-1:2006 +A12:2013 EN 60950-1:2001 (withdrawn) Assessment Manager: GC Page 7 of 13
Information technology equipment installed outdoors IEC 60950-22:2005 (Edition 1) EN 60950-22:2005 Audio/video, information and communication technology equipment IEC 62368-1:2014 (Edition 2) EN 62368-1:2014 Batteries IEC 62133:2012 Edition 2 EN62133:2013 IEC 62133:2001 (Edition 1) EN 62133:2002 Medical electrical equipment General requirements IEC 60601-1:2005 + A1:2012 (Edition 3.1) EN 60601-1:2006 + A12:2014 Medical electrical equipment Usability IEC 60601-1-6:2010 + A1:2013 (Edition 3.1) EN 60601-1-6:2010 + A1:2015 IEC 60601-1-6:2010 (Edition 3) EN 60601-1-6:2010 Medical electrical equipment Alarms IEC 60601-1-8:2006 + A1:2012 (Edition 1.1) EN 60601-1-8:2007 + A1:2013 Medical electrical equipment Home healthcare IEC 60601-1-11:2010 (Edition 2) EN 60601-1-11:2010 Medical electrical equipment Infusion pumps IEC 60601-2-24:2012 (Edition 2) EN 60601-2-24:2015 Medical electrical equipment Non-laser light sources IEC 60601-2-57:2011 (Edition 1) EN 60601-2-57:2011 Assessment Manager: GC Page 8 of 13
Where IEC or EN standards have exact equivalents in BS, EN or BS EN s, these are also included in the accreditation. END is recorded as issuing UKAS accredited certificates to organisations in the countries listed below. This list is current at the time of issue of this schedule. Australia European Union United Kingdom United States of America Assessment Manager: GC Page 9 of 13
Accreditation for the purpose of Notified Body Activity taking into account EA2/17 Directive / Regulation Conformity Assessment procedure/ Module/article Category of products or individual products Essential requirements: specification / Properties/s Machinery Directive 2006/42/EC Implemented in UK Law by: SI 2008 No. 1597 The Supply of Machinery (Safety) Regulations 2008 EC Type Examination (Annex IX) Annex IV items 9 10, 11, 20 The Electromagnetic Compatibility Regulations 2016 (SI 2016/1091) Electromagnetic Compatibility Directive2014/30/EU EU-type examination (Annex III) Industrial Equipment Information Technology Equipment Alarm Systems AV Equipment Railway Systems Laboratory and Test Equipment Air Traffic Management Transmission Systems Maritime Equipment Automotive Systems Domestic Appliances Military Equipment Assessment Manager: GC Page 10 of 13
Accreditation for the purpose of Notified Body Activity taking into account EA2/17 Directive / Regulation Conformity Assessment procedure/ Module/article Category of products or individual products Essential requirements: specification / Properties/s The Radio Equipment Regulations 2017 (SI 2017/1206) Radio Equipment Directive 2014/53/EU EU-type examination (Annex III) Air Traffic Management (ATM) Equipment Base station for mobile network Broadcast Citizens Band Cordless telephone Distress/Position Indicating Beacon Fixed link Fixed Wireless Access Industrial, Scientific and Medical within the scope of the directive Maritime (for non - SOLAS vessels only) Paging Private/Professional Mobile Radio Radar Radio Frequency Identification (RFID) Radio Local Area Network Short Range Device Telemetry/Telecommand TTE for fixed (wired) network (all types) Ultra wideband Applications (including Ground Probing Radar) Wireless Telephone Assessment Manager: GC Page 11 of 13
Accreditation for the purpose of Notified Body Activity taking into account EA2/17 Directive / Regulation Conformity Assessment procedure/ Module/article Category of products or individual products Essential requirements: specification / Properties/s Equipment Intended for use in Potentially Explosive Atmospheres (ATEX) 94/9/EC (As Amended) Implemented in UK law by: The Equipment and Protective Systems intended for use in Potentially Explosive Atmospheres Regulations 1996, (No 192) (As Amended) Equipment and protective systems intended for use in potentially explosive atmospheres (ATEX) 2014/34/EU Modules: Annex III EC-Type examination Annex VII ion QA Annex V verification Annex VI Conformity to type Annex IV QA Annex IX Unit verification Group I M1 and M2; Group II Cat 1, 2 and 3, Classes G and D; Protective Systems; Safety Devices; Components; Article 8(1)b for technical files. For the essential health and safety requirements including the following protection concepts: - Electrical Equipment d, e, i, m, n, o, p, q, t pd, id, md and td Non-electrical Equipment b, c and k Mutual Recognition Agreement between the European Union and Canada (OJEC L 280 of 16/10/98) Foreign Certification Body Radio Scope 1 Licenceexempt Radio Frequency Devices Mutual Recognition Agreement between the European Union and the USA (OJEC L 31 of 4/02/1999) Telecommunication Certification Body (TCB) TCB Scope A1, A2, A3, A4, B1, B2, B4 & C TCB Scheme of the Federal Communications Commission (FCC) of the United States of America, (47 CFR Sections 2.960 to 2.962) Assessment Manager: GC Page 12 of 13
Accreditation for the purpose of Notified Body Activity taking into account EA2/17 Directive / Regulation Conformity Assessment procedure/ Module/article Category of products or individual products Essential requirements: specification / Properties/s Mutual Recognition Agreement between the European Union and Australia and New Zealand (OJ L 229 of 17/08/1998, OJ L 359 of 29/12/2012 and OJ L 356 of 22/12/2012) Conformity Assessment Body (CAB) Low Voltage Equipment (LVD) sectoral annex Electromagnetic compatibility (EMC) sectoral annex Mutual Recognition Agreement between the European Union and Japan (OJ L 284 of 29/10/2001) Recognised Foreign Conformity Assessment Body (CAB) 1.Terminal equipment for the purpose of calls; 2. Terminal equipment except the preceding item; 3 All equipment specified in Article 38-2, paragraph 1, item 1, 2 & 3 of the Japanese Radio Law. END Assessment Manager: GC Page 13 of 13