BIOSTATISTICS Mahmoud Al Hussami, PhD., DSc. Associate Professor of Epidemiology
Unit One INTRODUCTION
Biostatistics It can be defined as the application of the mathematical tools used in statistics to the fields of biological sciences and medicine. It is a growing field with applications in many areas of biology including epidemiology, medical sciences, health sciences, educational research and environmental sciences. 3
Concerns of Biostatistics Biostatistics is concerned with collection, organization, summarization, and analysis of data. We seek to draw inferences about a body of data when only a part of the data is observed. 4
Purposes of Statistics To describe and summarize information thereby reducing it to smaller, more meaningful sets of data. To make predictions or to generalize about occurrences based on observations. To identify associations, relationships or differences between the sets of observations.
Data Data are numbers which can be measurements or can be obtained by counting. Biostatistics is concerned with the interpretation of the data and the communication of information about the data. 6
Sources of data Data are obtained from Analysis of records Surveys Counting Experiments Reports 7
Source of knowledge Traditions. It involves the handing down of knowledge from one generation to another. Authority. Experts. Clinical Experience, Trial and Error, and Intuition. Logical reasoning (inductive vs. deductive) Disciplined research (borrowed research).
Ways of Knowing There are many ways to obtain information, including sensory experience, agreement with others, expert opinion, logic, and the scientific method. The scientific method is considered by researchers the most likely way to produce reliable and accurate knowledge.
Ways of Knowing (continue) The scientific method involves answering questions through systematic data collation and analysis. The scientific research uses empirical data (data gathered through the senses) and is a systematic orderly and objective method of seeking information.
Logical Reasoning Is a method of knowing combines experience, intellectual faculties, and formal systems of thought. Inductive Reasoning. Is the process of developing generations from specific observations. E.g., a nurse may observe the anxious behavior of (specific) hospitalized children and conclude that (in general) children's separation from their parents is stressful. Deductive Reasoning. Is the process of developing specific perditions from general principles.
Inductive vs. Deductive Inductive : from particular to generalization Deductive : from general to specific, the conclusion are valid not true NO ONE ALONE IS ENOUGH, BOTH ARE A COMPLEMENTARY PARTS.
Deductive Reasoning Deductive Reasoning A type of logic in which one goes from a general statement to a specific instance. The classic example All men are mortal. (major premise) Socrates is a man. (minor premise) Therefore, Socrates is mortal. (conclusion)
Inductive Reasoning Inductive Reasoning, involves going from a series of specific cases to a general statement. The conclusion in an inductive argument is never guaranteed. Example: What is the next number in the sequence 6, 13, 20, 27, There is more than one correct answer.
PHILOSOPHIES OF RESEARCH The word science means knowledge. The word philosophy means wisdom. All research is based on philosophical beliefs about the world world view or paradigm. The perceived view is the basis of naturalistic (qualitative) research; the received view is the basis of empirical analytical (quantitative) research.
Paradigms for Health Research Paradigm: Is a world view; a general perspective on the complexities of the real world, with certain assumptions about reality. Paradigms for human inquiry are characterized in terms of the ways in which they respond to basic philosophical questions? Ontology: the nature of reality Epistemology: The relationship between inquirer and that being studied Axiology: role of values in the inquiry Methodology: how to obtain knowledge
Major Paradigms Positivism (also modernism, logical positivism) There is a reality out there that can be studies and known Phenomenon is not haphazard or random Highly objective in pursuit of knowledge Rooted in 19 th century thought. Guided by such philosophers as Mill, Newton, & Locke. Naturalism (also phenomenologic, constructive) Putting structures and ideas in a new ways Reality is not fixed Subjectivity is the primary way of understanding the phenomenon of interest. Began as a countermovement to positivism with writers such as Weber & Kant.
Assumption: Ontologic what is the nature of reality? Positivist Paradigm Reality exists; there is a real world driven by real natural causes. Naturalistic Paradigm Reality is multiple and subjective, mentally constructed by individuals.
Assumption: Epistemologic How is the inquirer related to those being researched? Positivist Paradigm The inquirer is independent from those being researched; findings are not influenced by the researcher. Naturalistic Paradigm The inquirer interacts with those being researched; findings are the creation of the interactive process.
Assumption: Axiologic What is the role of values in the inquiry? Positivist Paradigm Values and biases are to be held in check; objectivity is sought. Naturalistic Paradigm Subjectivity and values are inevitable and desirable.
Assumption: Methodologic How is knowledge obtained? Positivist Paradigm Deductive processes Emphasis on discrete, specific concepts. Verification of researchers hunches. Fixed design. Tight controls over contexts. Emphasis on measured, quantitative information; statistical analysis. Seeks generalizations. Naturalistic Paradigm Inductive processes. Emphasis on entirely of some phenomenon, holistic. Emerging interpretations grounded in participants experiences. Flexible design. Context-bound. Emphasis on narrative information; qualitative analysis. Seeks patterns.
Methods of Research Research methods are the techniques used by researchers to structure a study and to gather and analyze information relevant to the research question. Quantitative research, which is most closely allied with the positivist tradition. Qualitative research, which is most often associated with naturalistic inquiry.
Quantitative Research o Associated with positivism. o Use a scientific approach. o Mainly to understand the phenomenon of interest. o Use deductive reasoning to generate hunches that are tested in the real world. o Use mechanisms designed to control the study. o Researchers gather empirical evidence. o Must focus on human beings, who are inherently complex and diverse.
Qualitative Research Mainly to understand the human experience. Rich and in-depth information. Flexible. Associated with naturalistic paradigm. Use Inductive reasoning.
Variables 1.A variable is an object, characteristic, or property that can have different values. 2.A quantitative variable can be measured in some way. 3.A qualitative variable is characterized by its inability to be measured but it can be sorted into categories. 25
Random Variables 1. A random variable is one that cannot be predicted in advance because it arises by chance. Observations or measurements are used to obtain the value of a random variable. 2. Random variables may be discrete or continuous. 26
Discrete Random Variable 1. A discrete random variable has gaps or interruptions in the values that it can have. 2. The values may be whole numbers or have spaces between them. 27
Continuous Random Variable 1. A continuous random variable does not have gaps in the values it can assume. 2. Its properties are like the real numbers. 28
Populations and Samples 1. A population is the collection or set of all of the values that a variable may have. The entire category under consideration. 2. A sample is a part of a population. The portion of the population that is available, or to be made available, for analysis. 29
Population and Sampling Sampling: the process of selecting portion of the population. Representativeness: the key characteristic of the sample is close to the population. Sampling bias: excluding any subject without any scientific rational. Or not based on the major inclusion and exclusion criteria.
Example Studying the self esteem and academic achievement among college students. Population: all student who are enrolled in any college level. Sample: students college at the University of Jordan.
What is sampling? Sampling is the selection of a number of study units/subjects from a defined population.
Questions to Consider Reference population to whom are the results going to be applied? What is the group of people from which we want to draw a sample (study population)? How many people do we need in our sample (Sample Size)? How will these people be selected(sampling Method)?
Sampling - Populations Reference Population Study Population Sampling Frame Study Subjects
Population Is a complete set of persons or objects that possess some common characteristic that is of interest to the researcher. Two groups: The target population The accessible population
Target Population The entire group of people or objects to which the researcher wishes to generalize the findings of a study. Target population should meet the criteria of interest to the researcher Example: all people who were admitted to the renal unit for dialysis in Al- Basheer hospital during the period of 2014 2016.
Accessible Population The group of people or objects that is available to the researcher for a particular study
SAMPLING STUDY POPULATION SAMPLE TARGET POPULATION 38
Sampling Element: The single member of the population (population element or population member are used interchangeably) Sampling frame is the listing of all elements of a population, i.e., a list of all medical students at the university of Jordan, 2014-2016.
Sampling Methods Sampling depends on the sampling frame. Sampling frame: is a listing of all the units that compose the study population.
Primary vs Secondary Data Primary data. It is the data that has been compiled by the researcher using such techniques as surveys, experiments, depth interviews, observation, focus groups. Types of surveys. A lot of data is obtained using surveys. Each survey type has advantages and disadvantages. Mail: lowest rate of response; usually the lowest cost Personally administered: can probe ; most costly; interviewer effects (the interviewer might influence the response) Telephone: fastest Web: fast and inexpensive
Primary vs Secondary Data Secondary data. The data that has been compiled or published elsewhere, e.g., census data. The trick is to find data that is useful. The data was probably collected for some purpose other than helping to solve the researcher s problem at hand. Advantages: It can be gathered quickly and inexpensively. It enables researchers to build on past research. Problems: Data may be outdated. Variation in definition of terms. Different units of measurement. May not be accurate (e.g., census undercount).
Survey Errors Response Errors. Data errors that arise from issues with survey responses. subject lies question may be too personal or subject tries to give the socially acceptable response (example: Have you ever used an illegal drug? Have you even driven a car while intoxicated? ) subject makes a mistake subject may not remember the answer (e.g., How much money do you have invested in the stock market? interviewer makes a mistake in recording or understanding subject s response interviewer cheating interviewer wants to speed things up so s/he makes up some answers and pretends the respondent said them. interviewer effects vocal intonation, age, sex, race, clothing of interviewer may influence response. An elderly woman dressed very conservatively asking young people about usage of illegal drugs may get different responses than young interviewer wearing jeans with tattoos on her body and a nose ring.
Types of Sampling Methods Probability Sampling Methods. Involves the use of random selection process to select a sample from members or elements of a populations. Simple Random Sampling Systematic sampling. Stratified sampling. Multistage sampling. Cluster sampling.
Probability Sampling Methods Involves random selection procedures to ensure that each unit of the sample is chosen on the basis of chance All units of the study population should have an equal or at least a known chance of being included in the sample Requires a sampling frame Listing of all study units
Simple Random Sampling This is the simplest of probability sampling Make a numbered list of all units in the population Decide on the sample size Select the required number of sampling units using the lottery method or a random number table
Systematic Sampling Individuals are chosen at regular intervals from the sampling frame Ideally we randomly select a number to tell us the starting point every 5th household every 10th women attending ANC Sampling fraction = Sample size Study population Interval size= study population Sample size
Stratified Sampling If we have study units with different characteristics which we want to include in the study then the sampling frame needs to be divided into strata according to these characteristics Ensures that proportions of individuals with certain characteristics in the sample will be the same as those in the whole study population Random or systematic samples of predetermined sample size will have to be obtained from each stratum based on a sampling fraction for each stratum
Multistage Sampling Involves more than one sampling method Is therefore carried out in phases Does not require a initial sampling frame of whole population NEED TO KNOW SAMPLING FRAME OF CLUSTERS E.G. PROVINCES Require sampling frames of final clusters final clusters Applicable to community based studies e.g. interviewing people from different villages selected from different areas, selected from different districts, provinces
Cluster Sampling Selection of study units (clusters) instead of the selection of individuals All subjects/units in the cluster who meet the criteria will be sampled. Clusters often geographic units e.g. schools, villages etc Usually used in interventional studies E.g. assessing immunization coverage Advantages sampling frame is not required in this case Sampling study population scattered over a large area
Nonprobability Sampling Methods Nonprobability sampling: the sample elements are chosen from the population by nonrandom methods. More likely to produce a biased sample than the random sampling. This restricts the generalization of the study findings. Most frequent reasons for use of nonprobability samples involve convenience and the desire to use available subjects.
Types of Sampling Methods Nonprobability Sampling Methods: Convenience sampling. Snowball sampling. Quota sampling. Purposive sampling.
Convenience sampling (Accidental or incidental sampling): People may or may not be typical of the population, no accurate way to determine their representativeness Most frequently used in health research Advantages: Saves time and money
Snowball sampling: a method by which the study subjects assist in obtaining other potential subjects (networking) Useful in topics of research where the subjects are reluctant to make their identity known, Drug users, Aids patients, etc.
Quota sampling Similar to stratified sampling in that the first step involves dividing the population into homogeneous strata and selecting sample elements from each of these strata In Stratified random sampling the sample is done by random selection (a percentage of each strata selected randomly) In quota sampling, the sample is selected by convenience (the first 50% of males and 50% of females) A mean for securing potential subjects from these strata
In a quota sampling variables of interest to the researcher (include subject attributes), such as age, gender, educational background are included in the sample
Purposive sampling (handpicking, judgmental): Subjects are chosen because they are typical or representative of the accessible population, or because they are experts (more knowledgeable) in the field of research topic. Qualitative researchers use Purposive sampling
Variables represent information that must be collected in order to meet the objectives of a study Measurable characteristic of a person, object or phenomenon which can take on different values Weight Distance Monthly income Number of children Color Outcome of disease Types of food Sex Variables allow clear definition of the core problem and influencing factors by introducing the concept of value
Types of Variables Continuous (e.g., height) Discrete (e.g., number of children) Categorical (e.g., marital status) Dichotomous (e.g., gender) Attribute variable vs. Active variable Attribute Variable: Preexisting characteristics which researcher simply observes and measures. E.g. blood type. Active Variable: Researcher creates or manipulates this. E.g. experimental drug.
Types of Variables (cont.) Independent variable the presumed cause (of a dependent variable) Dependent variable the presumed effect (of an independent variable) Example: Smoking (IV) Lung cancer (DV)
Levels of Measurement Nominal Ordinal Interval Ratio
Levels of Measurement
Nominal Level of Measurement Categories that are distinct from each other such as gender, religion, marital status. They are symbols that have no quantitative value. Lowest level of measurement. Many characteristics can be measured on a nominal scale: race, marital status, and blood type. Dichotomous. Appropriate statistics: mode, frequency We cannot use an average. It would be meaningless here.
Ordinal Level of Measurement The exact differences between the ranks cannot be specified such as it indicates order rather than exact quantity. Involves using numbers to designate ordering on an attribute. Example: anxiety level: mild, moderate, severe. Statistics used involve frequency distributions and percentages. Appropriate statistics: same as those for nominal data, plus the median; but not the mean.
Interval level of Measurement They are real numbers and the difference between the ranks can be specified. Equal intervals, but no true zero. Involves assigning numbers that indicate both the ordering on an attribute, and the distance between score values on the attribute They are actual numbers on a scale of measurement. Example: body temperature on the Celsius thermometer as in 36.2, 37.2 etc. means there is a difference of 1.0 degree in body temperature. Appropriate statistics same as for nominal same as for ordinal plus, the mean
Ratio level of Measurement Is the highest level of data where data can categorized, ranked, difference between ranks can be specified and a true or natural zero point can be identified. A zero point means that there is a total absence of the quantity being measured. All scales, whether they measure weight in kilograms or pounds, start at 0. The 0 means something and is not arbitrary (SUBJECTIVE). Example: total amount of money.
What Type of Data To collect? The goal of the researcher is to use the highest level of measurement possible. Example: Two ways of asking about Smoking behavior. Which is better, A or B? (A) Do you smoke? Yes No (B)How many cigarettes did you smoke in the last 3 days (72 hours)? (A) Is nominal, so the best we can get from this data are frequencies. (B) is ratio, so we can compute: mean, median, mode, frequencies.
Parameter and Statistic Parameter is a descriptive measure computed from the data of the population. The population mean, μ, and the population standard deviation, σ, are two examples of population parameters. If you want to determine the population parameters, you have to take a census of the entire population. Taking a census is very costly. Parameters are numerical descriptive measures corresponding to populations. Since the population is not actually observed, the parameters are considered unknown constants. Statistic is a descriptive measure computed from the data of the sample. For example, the sample mean, x, and the standard deviation, s, are statistics. They are used to estimate the population parameters.
Statistics It is a branch of applied mathematics that deals with collecting, organizing, & interpreting data using welldefined procedures in order to make decisions. The term parameter is used when describing the characteristics of the population. The term statistics is used to describe the characteristics of the sample. Types of Statistics: Descriptive Statistics. It involves organizing, summarizing & displaying data to make them more understandable. Inferential Statistics. It reports the degree of confidence of the sample statistic that predicts the value of the population parameter
Descriptive Statistics Those statistics that summarize a sample of numerical data in terms of averages and other measures for the purpose of description, such as the mean and standard deviation. Descriptive statistics, as opposed to inferential statistics, are not concerned with the theory and methodology for drawing inferences that extend beyond the particular set of data examined, in other words from the sample to the entire population. All that we care about are the summary measurements such as the average (mean). This includes the presentation of data in the form of graphs, charts, and tables.
Descriptive Statistics Measures of Location Measures of Central Tendency: Mean Median Mode Measures of noncentral Tendency-Quantiles: Quartiles. Quintiles. Percentiles. Measure of Dispersion (Variability): Range Interquartile range Variance Standard Deviation Coefficient of variation Measures of Shape: Mean > Median-positive or right Skewness Mean = Median- symmetric or zero Skewness Mean < Median-Negative of left Skewness
Statistical Inference Is the procedure used to reach a conclusion about a population based on the information derived from a sample that has been drawn from that population. 74
Inferential Statistics Inferential statistics are used to test hypotheses (prediction) about relationship between variables in the population. A relationship is a bond or association between variables. It consists of a set of statistical techniques that provide prediction about population characteristics based on information in a sample from population. An important aspect of statistical inference involves reporting the likely accuracy, or of confidence of the sample statistic that predicts the value of the population parameter.
Inferential Statistics Bivariate Parametric Tests: One Sample t test (t) Two Sample t test (t) Analysis of Variance/ANOVA (F). Pearson s Product Moment Correlations (r). Nonparametric statistical tests: Nominal Data: Chi-Square Goodness-of-Fit Test Chi-Square Test of Independence Nonparametric statistical tests: Ordinal Data: Mann Whitney U Test (U Kruskal Wallis Test (H)
Research Hypothesis A tentative prediction or explanation of the relationship between two or more variables It s a translation of research question into a precise prediction of the expected outcomes In some way it s a proposal for solution/s In qualitative research, there is NO hypothesis
Research Hypothesis States a prediction Must always involve at least two variables Must suggest a predicted relationship between the independent variable and the dependent variable Must contain terms that indicate a relationship (e.g., more than, different from, associated with)
Hypotheses Criteria Written in a declarative form. Written in present tense. Contain the population Contain variables. Reflects problem statement or purpose statement. Empirically testable.
A hypothesis is made about the value of a parameter, but the only facts available to estimate the true parameter are those provided by the sample. If the statistic differs (and of course it will) from the hypothesis stated about the parameter, a decision must be made as to whether or not this difference is significant. If it is, the hypothesis is rejected. If not, it cannot be rejected. H 0 : The null hypothesis. This contains the hypothesized parameter value which will be compared with the sample value. H 1 : The alternative hypothesis. This will be accepted only if H 0 is rejected. Technically speaking, we never accept H 0 What we actually say is that we do not have the evidence to reject it. 80
Two types of errors may occur: α (alpha) and β (beta). The α error is often referred to as a Type I error and β error as a Type II error. You are guilty of an alpha error if you reject H 0 when it really is true. You commit a beta error if you accept H 0 when it is false. 81
Types of Errors If You Reject the null hypothesis Reject the null hypothesis Accept the null hypothesis Accept the null hypothesis When the Null Hypothesis is True (there really are no difference) False (there really are difference) False (there really are difference) True (there really are no difference) Then You Have. Made a Type I Error Made Type II Error
TRADEOFF! 1. There is a tradeoff between the alpha and beta errors. We cannot simply reduce both types of error. As one goes down, the other rises. 2. As we lower the error, the β error goes up: reducing the error of rejecting H 0 (the error of rejection) increases the error of Accepting H 0 when it is false (the error of acceptance). 83
Quality Control. A. A company purchases chips for its smart phones, in batches of 50,000. The company is willing to live with a few defects per 50,000 chips. How many defects? B. If the firm randomly samples 100 chips from each batch of 50,000 and rejects the entire shipment if there are ANY defects, it may end up rejecting too many shipments (error of rejection). If the firm is too liberal in what it accepts and assumes everything is sampling error, it is likely to make the error of acceptance. C. This is why government and industry generally work with an alpha error of.05 84
1. Formulate H 0 and H 1. H 0 is the null hypothesis, a hypothesis about the value of a parameter, and H 1 is an alternative hypothesis. e.g., H 0 : µ=12.7 years; H 1 : µ 12.7 years 2. Specify the level of significance (α) to be used. This level of significance tells you the probability of rejecting H 0 when it is, in fact, true. (Normally, significance level of 0.05 or 0.01 are used) 3. Select the test statistic: e.g., Z, t, F, etc. 4. Establish the critical value or values of the test statistic needed to reject H 0. DRAW A PICTURE! 5. Determine the actual value (computed value) of the test statistic. 6. Make a decision: Reject H 0 or Do Not Reject H 0. 85
I Hope This Will Help