Institute-Wise Time Table for WINTER Government Polytechnic for Distance Learning, Pune. Date: Day: 1 Morning

Similar documents
Institute-Wise Time Table for WINTER Government Polytechnic for Distance Learning, Pune. Date: Day: 1 Morning

09:30 A.M. to 01:30 P.M ESTIMATING & COSTING CC-3-A, CC-3-S, CC-3-N, CC-4-N ELECTRICAL POWER SYSTEM - II METROLOGY AND QUALITY CONTROL

Institute Wise Time Table for SUMMER 2017

Institute-Wise TENTATIVE Time Table for WINTER Government Polytechnic, Thane TOUR OPERATION MANAGEMENT WESTERN WORLD TOURIST DESTINATION

Institute-Wise Time Table for SUMMER 2018

GOVERNMENT POLYTECHNIC PUNE (An Autonomus Institute of Govt. of Maharashtra) Theory Time Table for First Shift, Second Shift and Part Time

BHARATH INSTITUTE OF HIGHER EDUCATION AND RESEARCH ODD SEMESTER UNIVERSITY EXAMINATION TIME TABLE / NOV

Bundelkhand Institute of Engineering & Technology, Jhansi. B. Tech.-First Semester (Common to all Branches)

( Engg./Arch./Pharm. Tech. Old syllabus, for the session (for 2 ND -Final Yr) New syllabus, for the session (for 1st Yr)

PRACTICAL EXAMINATION, TIME-TABLE FOR FEBRUARY-MARCH-2019 EXAMINATIONS

PRACTICAL EXAMINATION, TIME-TABLE FOR JULY 2015 EXAMINATIONS

PRACTICAL EXAMINATION, TIME-TABLE FOR JULY-AUGUST 2017 EXAMINATIONS

LUCKNOW. (*Schedule for Students Enrolled with formerly GBTU, Lucknow) M. TECH. (FIRST/THIRD SEMESTER) THEORY EXAMINATION SCHEDULE SESSION

LINGAYA S VIDYAPEETH, Faridabad Under Section -3 of UGC Act-1956 Date Sheet of End Semester Examination (Re-appear) May / June- 2018)

UTTARAKHAND TECHNICAL UNIVERSITY DEHRADUN

Final Invigilation Schedule, Semester 1/2017 Rajamangala University of Technology Srivijaya, College of Industrial Technology and Management

Installation Instructions

MUE247 Alignment Methods and Application H.H. Sheik Sultan Tower (0) Floor Corniche Street Abu Dhabi U.A.E

UTTER PREDESH TECHNICAL UNIVERSITY ODD SEMESTER EXAMINATION rd SEMESTER. Agriculture Engg

RLS/E-EV MX SERIES. Low NOx Modulating Dual Fuel Burners FIRING RATES

DOUBLE-DEGREE Program 1A 2A

HANDBOOK OF VAPOR DEGREASING

Education, Event & Networking Sponsorship

Frequently Asked Questions

We Provide Solutions for Electrical, Electronic,T&M,Process Instrumentation.We Are Authorised Regional Reprentavtive For

Technology. Reinforced Earth Wall Typical Section. Traffic Barrier. Roadway. Select Granular Material. Facing Panel Random Backfill.

Model of R&D and inovation in the holding company

2014 National Curriculum Science Band 1

Mechanical Vibration Causes, Effect, Analysis & Prevention Techniques

The design and development of a force comparator standard machine to provide national traceability in force measurement to industry.

RL/B MZ SERIES. Two Stage Light Oil Burners FIRING RATES LIGHT OIL RL 300/B MZ RL 400/B MZ. 600/ kw 1000/ kw

Event: Sonographic Examination of the Rotator Cuff Tendons 2. Event: Duplex Examination of Carotid Arteries 3

: : .. : / / : Prof. Samy Jimmy Ebeid Page 1/5

ELECTRICAL: COMMERCIAL INSIDE WIREMAN

Maximizing Machinery Reliability vibration awareness

Variable Frequency Drives Lessons Learned

Media Briefing. Damage to Majuba power station coal storage silo. 03 November Tshediso Matona Chief Executive

ASCO Power Control Systems Overview

SEMICON West Standards Meeting Schedule San Francisco Marriott Marquis and Moscone Center (North Hall), San Francisco, CA. Sunday, July 8, 2012

SEMICON West Standards Meeting Schedule San Francisco Marriott Marquis and Moscone Center (North Hall), San Francisco, CA. Sunday, July 8, 2012

LANH25 SQA Unit Code H Maintain the health of sports turf

For ATBU postgraduate programmes admission requirements, method of application, duration and other details, go to

Standards. n Built in accordance with NEMA, ANSI, UL and CSA standards

EIE inter 2 A(40) Thu CB2405 Asst.Prof.Dr.PINIT KUMHOM Mon2 Oct 2017 Wed6 Dec

Numerical analysis of the embedded abutments of integral bridges

20 Kinesiotherapy. Types of base system:

PROBE CONDITIONING SYSTEM- P/N FOR BATCH FURNACES

Science skills progression KS2

Energy efficiency and renewable options for dairy farms

Appendix I Teaching outcomes of the degree programme (art. 1.3)

Vibration Analysis & Practical Solutions

Industrial Flow Measurement 3rd Edition. David W. Spitzer

A Comparative Reliability Analysis of Bulldozers arriving at workshop in Eastern India: A Case Study.

For JUNIOR ENGINEER. (Electrical /Mechanical/Civil /Electronics Engineering) [Degree /Diploma Holders] Join India's # 1 Online /Offline Test series

Handbook Of Lubrication And Tribology - Volume Ii Theory And Design 2nd Edition

This sudden release of uncontrolled energy could send a lethal projectile amongst men working close by and even penetrate bullet proof glass etc.

CONCEPTUAL SPECIFICATION TARGET COLLIMATOR LONG DISPERSION SUPPRESSOR P7 [TCLD]

8 th International Conference on Industrial Tribology CONFERENCE SUMMARY

AQC93, 47 th Annual Quality Congress, Boston, Massachusetts, May 24-26, 1993

RLS/BP MX SERIES. Low NOx Modulating Dual Fuel Burners FIRING RATES. RLS 300/BP MX 600/ kw RLS 400/BP MX 800/ kw DUAL FUEL.

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

FINAL July Reassessment Examination Timetable

ADVANCED MANUFACTURING CAREER CLUSTER

High current plug-in connector

Analysis of the human risk factor which affects the reliability and safety of machinery

DOELAP On-Site Assessment Requirements Checklist Page 1 of 24 Participant:

Timetable detailed schedule Term 3 and

COURSE LISTING. Courses Listed. Training for Cloud with SAP Hybris in Service Cloud (C4C) 23 August 2018 (06:31 BST) Fortgeschrittene.

Practical Investigation of Cool Chair in Warm Offices

Company Products Automation Service References. 1 Copyright SCHNUTZ GmbH

Tel. : / Fax :

PERSONAL FITNESS INSTRUCTIONAL GUIDE: PERSONAL FITNESS

Techniques and innovation in NDT of wind turbines. Manfred Johannes CSIR

CC032 Techniques for Pavement Rehabilitation

Class 3. Year A. Autumn Term Spring Term Summer term Invaders and Settlers (Saxons, Vikings and Romans) Science Year 3 Magnets and friction

Reduction in Organic Solvent Emissions at a Lighting Fittings and Fixture Manufacturing Industry. Sweden 1990 Full scale

Kadi Sarva Vishwavidyalaya Gandhinagar

Science curriculum: Reception. Working Scientifically - Skills. Plants and Animals

High Grade Universal Testing Machines

MAXPRO200 Plasma Cutting System Acoustic Noise Level Measurements

Dr. D. R. Nandanwar Principal. Date:- 11/04/2018

THE FACTORIES AND OTHER PLACES OF WORK ACT. (Cap. 514)

Distribution Partner Briefing: A Partnership for Profit. Welcome to Smartcool s information package for prospective channel partners.

Fans for the petrochemical industry Engineering, fabrication, installation and service

ALERT SERVICE BULLETIN Alert Service Bulletin No. 072

CASTELLINI Culture

Capacitive Sensors 17

Eye Of SOLDERLESS INTERCONNECT TECHNOLOGY GUIDELINE. the Needle

Prepared for: Butte County Department of Water Resource Conservation (BCDWRC) Project No: County of Butte Contract Number: 18050

IRMER Ionising Radiation Medical Exposure Regulations

Embry-Riddle Aeronautical University - Worldwide. BS in Technical Management Program Plan File (PPF) Category I

RLS/M MZ SERIES. Modulating Dual Fuel Burners FIRING RATES DUAL FUEL

ACCELERATED BRIDGE REPLACEMENT

Pettit Center Figure Skating Schedule SEPTEMBER 2018

The Nondestructive Testing Education in China: Current Status, Development Objectives and Strategies

Non-Destructive Test (NDT) and Non-Destructive Evaluation (NDE) Requirements

Health & Safety, Edinburgh Napier University

1 2 3 Based on the contents detailed below, assess the substantial equivalence to a legally marketed predicate device. In that case, the standards, et

ALERT SERVICE BULLETIN Alert Service Bulletin No. 072 Rev. A

Transcription:

Maharashtra State Board of Technical Education, Mumbai. Government Polytechnic Building,49, Kherwadi, Bandra (E), Mumbai 400 051. TIMETABLE FOR WINTER 2016 EXAMINATION Institute-Wise Table for WINTER 2016 Government Polytechnic for Distance Learning, Pune Date: 16-11-2016 Day: 1 Morning Name 09:30 A.M. to 12:30 P.M. 0851 INDUSTRIAL SAFETY MC-4-N 09:30 A.M. to 12:30 P.M. 17201 COMMUNICATION SKILLS 09:30 A.M. to 12:30 P.M. 17916 COMMUNICATION SKILLS 09:30 A.M. to 12:30 P.M. 17979 IRRIGATION CC-6-G 09:30 A.M. to 12:30 P.M. 17987 09:30 A.M. to 12:30 P.M. 17988 02:00 P.M. to 05:00 P.M. 12801 INDUSTRY ELECTRICAL SYSTEMS-II FLUID MECHANICS & MACHINARY EC-1-A, MC-1-A, CC-1-A, CC-1-S, MC-1-S, EC-1- S, CC-1-N, MC-1-N, EC-1-N CC-2-G, EC-2-G, MC-2-G, MC-3-E, CC-3-E, EC-3- E EC-6-G MC-6-G Date: 16-11-2016 Day: 1 Afternoon Name FUNDAMENTALS OF ELECTRONICS 02:00 P.M. to 05:00 P.M. 12877 MANAGEMENT MC-4-E, MC-4-C CC-8-E, EC-8-E, MC-8-E, MC-8-C, CC-8-C, EC-8- C 02:00 P.M. to 05:00 P.M. 17410 THERMAL MC-3-A, MC-2-S, MC-3-N, EC-3-N 02:00 P.M. to 05:00 P.M. 17415 ELECTRICAL MACHINES - I EC-3-A, EC-3-S, EC-2-N 02:00 P.M. to 05:00 P.M. 17418 TRANSPORTATION SYSTEM Date: 17-11-2016 Day: 2 Morning Name CC-3-A, CC-3-S, CC-3-N 09:30 A.M. to 12:30 P.M. 12838 A. C. MACHINES EC-6-E, EC-6-C 09:30 A.M. to 12:30 P.M. 12845 09:30 A.M. to 01:30 P.M. 12849 FLUID MECHANICS & MACHINERY DESIGN OF STEEL STRUCTURES MC-6-E, MC-6-C CC-7-E, CC-7-C 09:30 A.M. to 12:30 P.M. 17609 MANUFACTURING SYSTEM EC-4-A, MC-3-A, MC-3-S, EC-4-S, MC-3-N 09:30 A.M. to 12:30 P.M. 17917 MATHEMATICS 09:30 A.M. to 01:30 P.M. 17980 ESTIMATING & COSTING CC-6-G 09:30 A.M. to 12:30 P.M. 17984 INDUSTRIAL INSTRUMENTATION CC-2-G, EC-2-G, MC-2-G, EC-2-E, MC-2-E, CC-2- E, EC-2-C, MC-2-C, CC-2-C EC-6-G

09:30 A.M. to 12:30 P.M. 17989 MEASUREMENT & MC-6-G Date: 17-11-2016 Day: 2 Afternoon Name 02:00 P.M. to 06:00 P.M. 12783 BUILDING DRAWING CC-4-E, CC-4-C 02:00 P.M. to 05:00 P.M. 12802 STRENGTH OF MATERIALS MC-4-E, MC-4-C 02:00 P.M. to 05:00 P.M. 12888 02:00 P.M. to 05:00 P.M. 17416 02:00 P.M. to 05:00 P.M. 17424 02:00 P.M. to 05:00 P.M. 17947 02:00 P.M. to 05:00 P.M. 17948 POWER ELECTRONICS AND DRIVES ELECTRICAL INSTALLATION SYSTEM ELECTRICAL TECHNOLOGY APPLIED ELECTRONICS TRANSPORTATION ELECTRICAL CIRCUITS & NETWORK EC-8-E, EC-8-C EC-4-A, EC-4-S MC-2-A, MC-3-S, MC-2-S, MC-2-N CC-4-G EC-4-G 02:00 P.M. to 05:00 P.M. 17956 STRENGTH OF MATERIALS MC-4-G Date: 18-11-2016 Day: 3 Morning Name 09:30 A.M. to 12:30 P.M. 12758 (CIVIL) CC-2-E, CC-2-C 09:30 A.M. to 12:30 P.M. 12761 09:30 A.M. to 12:30 P.M. 12765 (ELECTRICAL) (MECHANICAL) EC-2-E, EC-2-C MC-2-E, MC-2-C 09:30 A.M. to 12:30 P.M. 12835 INSTRUMENTATION EC-6-E, EC-6-C 09:30 A.M. to 12:30 P.M. 12846 ADVANCED MANUFACTURING PROCESS 09:30 A.M. to 01:30 P.M. 17205 DRAWING 09:30 A.M. to 12:30 P.M. 17608 FLUID POWER MC-3-A MC-6-E, MC-6-C CC-1-A, MC-1-A, CC-1-S, EC-1-S, MC-1-S, CC-1- N, EC-1-N, MC-1-N 09:30 A.M. to 12:30 P.M. 17637 ELECTRICAL MACHINES - II EC-4-A, EC-4-S, EC-3-S, EC-4-N, EC-3-N 09:30 A.M. to 11:30 A.M. 17918 09:30 A.M. to 11:30 A.M. 17921 09:30 A.M. to 11:30 A.M. 17924 (PHYSICS) ( PHYSICS) ( PHYSICS) CC-2-G MC-2-G EC-2-G 09:30 A.M. to 12:30 P.M. 17981 CONCRETE TECHNOLOGY CC-6-G 09:30 A.M. to 12:30 P.M. 17985 SWITCH GEAR & PROTECHTION EC-6-G 09:30 A.M. to 12:30 P.M. 17990 POWER MC-6-G Date: 18-11-2016 Day: 3 Afternoon Name 02:00 P.M. to 05:00 P.M. 12784 CONCRETE TECHNOLOGY CC-4-E, CC-4-C

02:00 P.M. to 05:00 P.M. 12792 ELECTRICAL CIRCUITS AND NETWORKS 02:00 P.M. to 05:00 P.M. 12803 02:00 P.M. to 05:00 P.M. 12889 02:00 P.M. to 05:00 P.M. 12904 02:00 P.M. to 05:00 P.M. 17417 02:00 P.M. to 05:00 P.M. 17420 02:00 P.M. to 05:00 P.M. 17945 MECHANICAL ENGINEEING MATERIALS HEATING, VENTILATION & AIR CONDITIONING REFRIGERATION & AIRCONDITIONING SYSTEM - I CONCRETE TECHNOLOGY & SOIL MECHANICS MECHANICS OF STRUCTURES EC-4-E, EC-4-C MC-4-E, MC-4-C EC-8-E, EC-8-C MC-8-E, MC-8-C EC-3-A, EC-3-S, EC-3-N CC-3-A, CC-3-S, CC-3-N CC-4-G 02:00 P.M. to 05:00 P.M. 17949 INDUSTRY ELECTRICAL SYSTEMS-I EC-4-G 02:00 P.M. to 05:00 P.M. 17957 ELECTRICAL MC-4-G Date: 19-11-2016 Day: 4 Morning Name 09:30 A.M. to 12:30 P.M. 12827 IRRIGATION CC-6-E, CC-6-C 09:30 A.M. to 12:30 P.M. 12836 09:30 A.M. to 12:30 P.M. 12847 ELECTRICAL ESTIMATION & COSTING MEASUREMENTS & 09:30 A.M. to 12:30 P.M. 17204 APPLIED MECHANICS 09:30 A.M. to 12:30 P.M. 17612 09:30 A.M. to 11:30 A.M. 17919 09:30 A.M. to 11:30 A.M. 17922 09:30 A.M. to 11:30 A.M. 17925 REFRIGERATION AND AIR- CONDITIONING (CHEMISTRY) (CHEMISTRY) (CHEMISTRY) EC-6-E, EC-6-C MC-6-E, MC-6-C CC-2-A, MC-2-A, EC-2-A, CC-2-S, MC-2-S, EC-2- S, EC-2-N, CC-2-N, MC-2-N MC-4-A, MC-4-N, MC-4-N CC-2-G MC-2-G EC-2-G 09:30 A.M. to 12:30 P.M. 17982 HIGHWAY CC-6-G 09:30 A.M. to 12:30 P.M. 17986 A. C. MACHINES EC-6-G 09:30 A.M. to 12:30 P.M. 17991 02:00 P.M. to 05:00 P.M. 12785 ADVANCE MANUFACTURING PROCESS MC-6-G Date: 19-11-2016 Day: 4 Afternoon Name MECHANICS OF STRUCTURE CC-4-E, CC-4-C 02:00 P.M. to 05:00 P.M. 12804 ELECTRICAL MC-4-E, MC-4-C 02:00 P.M. to 06:00 P.M. 12878 DESIGN OF STRUCTURES CC-8-E, CC-8-C 02:00 P.M. to 05:00 P.M. 12890 MICROPROCESSORS & MICROLERS EC-8-E

02:00 P.M. to 06:00 P.M. 12903 DESIGN OF MACHINE ELEMENTS MC-8-E, MC-8-C 02:00 P.M. to 05:00 P.M. 17412 THEORY OF MACHINES MC-3-A, MC-3-N 02:00 P.M. to 05:00 P.M. 17421 HYDRAULICS CC-3-A, CC-3-S, CC-3-N 02:00 P.M. to 06:00 P.M. 17946 BUILDING DRAWING CC-4-G 02:00 P.M. to 04:00 P.M. 17950 ELEMENTS OF MECHANICAL EC-4-G 02:00 P.M. to 05:00 P.M. 17958 THERMAL MC-4-G Date: 21-11-2016 Day: 5 Morning Name 09:30 A.M. to 12:30 P.M. 12829 HIGHWAY CC-6-E, CC-6-C 09:30 A.M. to 12:30 P.M. 12837 SWITCHGEAR AND PROTECTION EC-6-E, EC-6-C 09:30 A.M. to 12:30 P.M. 12848 POWER MC-6-E, MC-6-C 09:30 A.M. to 01:30 P.M. 17610 MACHINE DESIGN MC-4-A, MC-4-S, MC-4-N 09:30 A.M. to 12:30 P.M. 17643 ELECTRICAL MATERIALS & WIRING 09:30 A.M. to 12:30 P.M. 17920 CONSTRUCTION MATERIALS CC-2-G EC-3-A, EC-2-S 09:30 A.M. to 01:30 P.M. 17923 DRAWING MC-2-G, MC-2-E, MC-2-C 09:30 A.M. to 12:30 P.M. 17927 02:00 P.M. to 05:00 P.M. 12786 02:00 P.M. to 05:00 P.M. 12793 FUNDAMENTALS OF ELECTRICAL Date: 21-11-2016 Day: 5 Afternoon Name TRANSPORTATION GENERATION EC-2-G, EC-2-E, EC-2-C CC-4-E, CC-4-C EC-4-E, EC-4-C 02:00 P.M. to 06:00 P.M. 17422 THEORY OF STRUCTURE CC-4-A, CC-4-S, CC-3-N 09:30 A.M. to 12:30 P.M. 12756 ENGLISH Date: 22-11-2016 Day: 6 Morning Name 09:30 A.M. to 01:30 P.M. 12828 ESTIMATION & COSTING CC-6-E, CC-6-C 09:30 A.M. to 12:30 P.M. 17213 ELECTRONICS - I EC-2-N 09:30 A.M. to 12:30 P.M. 17214 FUNDAMENTAL OF ELECTRICAL ENGINNERING Date: 22-11-2016 Day: 6 Afternoon Name EC-2-E, MC-2-E, CC-2-E, EC-1-C, MC-1-C, CC-1- C EC-2-A, EC-2-S, EC-2-N 02:00 P.M. to 05:00 P.M. 12791 APPLIED ELECTRONICS EC-4-E, EC-5-C Date: 23-11-2016 Day: 7 Morning

Name 09:30 A.M. to 12:30 P.M. 12850 CONTRACT & ACCOUNTS CC-7-E, CC-7-C 09:30 A.M. to 12:30 P.M. 12859 09:30 A.M. to 01:30 P.M. 21001 TESTING & MAINTENANCE OF ELECTRICAL MACHINES DESIGN OF STEEL STRUCTURES EC-7-E, EC-7-C CC-7-G 09:30 A.M. to 12:30 P.M. 21008 ILLUMATION 09:30 A.M. to 12:30 P.M. 21011 METROLOGY & QUALITY MC-7-G Date: 23-11-2016 Day: 7 Afternoon Name 02:00 P.M. to 05:00 P.M. 12768 COMMUNICATION SKILLS EC-2-C, CC-2-C, MC-2-C 02:00 P.M. to 05:00 P.M. 17301 APPLIED MATHEMATICS Date: 24-11-2016 Day: 8 Morning Name EC-2-A, CC-2-A, MC-2-A, EC-2-S, CC-2-S, MC-2- S, CC-2-N, MC-2-N, EC-2-N 09:30 A.M. to 12:30 P.M. 17911 ENGLISH MC-1-G, CC-1-G, EC-1-G 02:00 P.M. to 05:00 P.M. 12807 02:00 P.M. to 05:00 P.M. 12814 02:00 P.M. to 05:00 P.M. 12823 Date: 24-11-2016 Day: 8 Afternoon Name GEO TECHNICAL ELECTRICAL MEASAUREMENT THEORY OF MACHINES & MECHANISMS CC-5-E, CC-5-C EC-5-E, EC-4-C MC-5-E, MC-5-C 02:00 P.M. to 06:00 P.M. 17501 ESTIMATING & COSTING CC-3-A, CC-3-S, CC-3-N, CC-4-N 02:00 P.M. to 05:00 P.M. 17508 02:00 P.M. to 05:00 P.M. 17530 02:00 P.M. to 05:00 P.M. 17965 02:00 P.M. to 05:00 P.M. 17967 02:00 P.M. to 05:00 P.M. 17971 SYSTEM - II METROLOGY AND QUALITY GEO TECHNICAL ELECTRICAL & ELECTRONIC MEASUREMENT BASIC ELECTRONICS & MECHATRONICS Date: 25-11-2016 Day: 9 Morning Name EC-4-A, EC-4-S, EC-4-N MC-4-A, MC-4-S, MC-3-N CC-5-G EC-5-G MC-5-G 09:30 A.M. to 12:30 P.M. 12871 INDUSTRIAL FLUID POWER MC-7-E, MC-7-C 09:30 A.M. to 12:30 P.M. 21002 09:30 A.M. to 12:30 P.M. 21009 PUBLIC HEALTH MODERN ELECTRIC TRACTION CC-7-G

09:30 A.M. to 12:30 P.M. 21012 AUTOMOBILE MC-7-G Date: 25-11-2016 Day: 9 Afternoon Name 02:00 P.M. to 05:00 P.M. 12759 MECHANICS CC-2-E, CC-3-C 02:00 P.M. to 05:00 P.M. 17304 STRENGTH OF MATERIALS MC-3-A, MC-3-S 02:00 P.M. to 06:00 P.M. 17309 02:00 P.M. to 05:00 P.M. 17323 CIVIL DRAWING ELECTRICAL CIRCUITS & NETWORKS 02:00 P.M. to 05:00 P.M. 17929 MECHANICS 09:30 A.M. to 12:30 P.M. 17104 CC-2-A, CC-2-S, CC-2-N EC-2-A Date: 28-11-2016 Day: 10 Morning Name MATHEMATICS 09:30 A.M. to 11:30 A.M. 17912 BASIC SCIENCE (PHYSICS) Date: 28-11-2016 Day: 10 Afternoon Name 02:00 P.M. to 05:00 P.M. 12806 ADVANCE SURVEYING CC-5-E, CC-5-C CC-3-G, MC-3-G, EC-3-G, EC-3-E, MC-3-E, MC-3- C, EC-3-C MC-1-A, CC-1-A, EC-1-A, CC-1-S, EC-1-S, MC-1- S, MC-1-N, CC-1-N, EC-1-N CC-1-G, EC-1-G, MC-1-G, EC-1-E, MC-1-E, CC-1- E, MC-1-C, CC-1-C, EC-1-C 02:00 P.M. to 05:00 P.M. 17502 IRRIGATION CC-4-A, CC-4-S, CC-4-N 02:00 P.M. to 05:00 P.M. 17527 ADVANCED MANUFACTURING PROCESSES 02:00 P.M. to 05:00 P.M. 17966 HYDRAULICS CC-5-G 02:00 P.M. to 05:00 P.M. 17968 TRANSMISSION & DISTRIBUTION OF MC-3-A, MC-3-S, MC-3-N EC-5-G 02:00 P.M. to 05:00 P.M. 17972 THEORY OF MACHINES MC-5-G 09:30 A.M. to 12:30 P.M. 12851 09:30 A.M. to 12:30 P.M. 12860 09:30 A.M. to 12:30 P.M. 12872 Date: 29-11-2016 Day: 11 Morning Name ENVIRONMENT ILLUMINATION PRODUCTION TECHNOLOGY 09:30 A.M. to 12:30 P.M. 21003 CONTRACTS & ACCOUNTS CC-7-G 09:30 A.M. to 12:30 P.M. 21010 ELEMENTS OF INDUSTRIAL AUTOMATION CC-7-E, CC-8-C EC-7-E, EC-7-C MC-7-E, MC-7-C 09:30 A.M. to 12:30 P.M. 21013 INDUSTRIAL FLUID POWER MC-7-G Date: 29-11-2016 Day: 11 Afternoon Name

02:00 P.M. to 05:00 P.M. 17303 ENGG. MATERIAL MC-2-N 02:00 P.M. to 05:00 P.M. 17310 SURVEYING CC-2-A, CC-2-S, CC-2-N 02:00 P.M. to 05:00 P.M. 17322 ELECTRICAL MEASUREMENT & INSTRUMENTATION EC-3-A, EC-3-S, EC-2-S, EC-3-N, EC-4-N 02:00 P.M. to 05:00 P.M. 17931 BUILDING CONSTRUCTION CC-3-G, CC-3-E, CC-3-C 02:00 P.M. to 05:00 P.M. 17933 02:00 P.M. to 06:00 P.M. 17940 BASIC ELECTRONICS (ELECTRICAL) MECHANICAL DRAWING EC-3-G Date: 30-11-2016 Day: 12 Morning Name 09:30 A.M. to 11:30 A.M. 17102 APPLIED PHYSICS 09:30 A.M. to 11:30 A.M. 17913 BASIC SCIENCE (CHEMISTRY) Date: 30-11-2016 Day: 12 Afternoon Name MC-3-G, MC-3-E, MC-3-C 02:00 P.M. to 05:00 P.M. 12808 HYDRAULICS CC-5-E, CC-5-C 02:00 P.M. to 05:00 P.M. 12824 PRODUCTION PROCESSES MC-5-E, MC-5-C 02:00 P.M. to 05:00 P.M. 17503 02:00 P.M. to 05:00 P.M. 17528 ENVIRONMENTAL SYSTEM MECHANICAL MEASUREMENTS 02:00 P.M. to 05:00 P.M. 17963 ADVANCED SURVEYING CC-5-G 02:00 P.M. to 05:00 P.M. 17969 02:00 P.M. to 05:00 P.M. 17973 D. C. MACHINES & TRANSFORMERS MANUFACTURING PROCESSES CC-1-A, EC-1-A, MC-1-A, MC-1-S, CC-1-S, EC-1- S, MC-1-N, CC-1-N, EC-1-N CC-1-G, EC-1-G, MC-1-G, EC-1-E, MC-1-E, CC-1- E, MC-1-C, CC-1-C, EC-1-C CC-4-A, CC-4-S, CC-4-N MC-4-A, MC-4-S EC-5-G MC-5-G Date: 01-12-2016 Day: 13 Morning Name 09:30 A.M. to 12:30 P.M. 12863 INDUSTRIAL AUTOMATION EC-7-E, EC-7-C 09:30 A.M. to 12:30 P.M. 21005 09:30 A.M. to 12:30 P.M. 21014 02:00 P.M. to 06:00 P.M. 17305 MICROLER AND APPLICATIONS PRODUCTION & ROBOTICS MC-7-G Date: 01-12-2016 Day: 13 Afternoon Name MECHANICAL DRAWING MC-2-A, MC-2-S, MC-2-N 02:00 P.M. to 05:00 P.M. 17321 INDUSTRIAL ELECTRONICS EC-2-A, EC-2-S, EC-2-N, EC-3-N 02:00 P.M. to 05:00 P.M. 17932 SURVEYING CC-3-G, CC-3-E, CC-3-C

02:00 P.M. to 05:00 P.M. 17934 GENERATION EC-3-G 02:00 P.M. to 05:00 P.M. 17939 BASIC ELECTRONICS EC-3-E, EC-3-C 02:00 P.M. to 05:00 P.M. 17941 09:30 A.M. to 11:30 A.M. 17103 MECHANICAL MATERIALS MC-3-G Date: 02-12-2016 Day: 14 Morning Name CHEMISTRY OF MATERIAL 09:30 A.M. to 12:30 P.M. 17914 BASIC MATHEMATICS Date: 02-12-2016 Day: 14 Afternoon Name 02:00 P.M. to 05:00 P.M. 12809 THEORY OF STRUCTURE CC-5-E, CC-5-C 02:00 P.M. to 05:00 P.M. 12815 D. C. MACHINES & TRANSFORMERS CC-1-A, MC-1-A, EC-1-A, CC-1-S, MC-1-S, EC-1- S, EC-1-N, MC-1-N, CC-1-N CC-1-G, EC-1-G, MC-1-G, EC-1-E, MC-1-E, CC-1- E, MC-1-C, CC-1-C, EC-1-C EC-5-E, EC-5-C 02:00 P.M. to 05:00 P.M. 17507 UTILISATION SYSTEM EC-4-A, EC-3-S, EC-4-N 02:00 P.M. to 05:00 P.M. 17526 AUTOMOBILE MC-4-A, MC-4-S 02:00 P.M. to 06:00 P.M. 17964 THEORY OF STRUCTURES CC-5-G Date: 03-12-2016 Day: 15 Morning Name 09:30 A.M. to 12:30 P.M. 12873 AUTOMOBILE MC-7-E, MC-7-C 09:30 A.M. to 12:30 P.M. 12879 09:30 A.M. to 12:30 P.M. 21006 02:00 P.M. to 05:00 P.M. 17308 ADVANCED CONSTRUCTION TECHNIQUES & EQUIPMENTS ENERGY CONSERVATION & AUDIT CC-8-E, CC-7-C Date: 03-12-2016 Day: 15 Afternoon Name BUILDING CONSTRUCTION SYSTEM 02:00 P.M. to 05:00 P.M. 17930 APPLIED MATHEMATICS 02:00 P.M. to 05:00 P.M. 12816 Date: 05-12-2016 Day: 16 Afternoon Name TRANSMISSION AND DISTRIBUTION OF ELECTRIC POWER CC-3-A, CC-2-S, CC-2-N CC-3-G, EC-3-G, MC-3-G, EC-3-E, MC-3-E, CC-3- E, EC-3-C, CC-3-C, MC-3-C EC-5-E, EC-5-C 02:00 P.M. to 05:00 P.M. 12825 THERMAL MC-5-E, MC-5-C 02:00 P.M. to 06:00 P.M. 17505 DESIGN OF STRUCTURE CC-4-A, CC-4-S, CC-4-N 02:00 P.M. to 05:00 P.M. 17509 MICROPROCESSOR & EC-3-A

Date: 06-12-2016 Day: 17 Morning 09:30 A.M. to 12:30 P.M. 12858 09:30 A.M. to 12:30 P.M. 12870 09:30 A.M. to 12:30 P.M. 21007 02:00 P.M. to 05:00 P.M. 17311 Name UTILIZATION OF ELECTRICAL ENERGY METROLOGY & QUALITY TESTING & MAINTENANCE OF ELECTRICAL EQUIPMENTS EC-7-E, EC-7-C MC-7-E, MC-7-C Date: 06-12-2016 Day: 17 Afternoon Name MECHANICS OF STRUCTURE CC-3-A, CC-3-S, CC-2-N POINTS TO BE NOTED : The PROPOSED Table for WINTER 2016 was displayed on M.S.B.T.E. Portal for the information of students,institutes and all concerned.the final table for WINTER 2016 after incorporating necessary changes along with date of examination is being displayed herewith... The duration of WINTER 2016 Examination is 18 working days. The Examinations are scheduled for all days excluding 4th Saturday i.e 26th Nov 2016 and Sundays i.e.20 Nov 2016,27 Nov 2016 and 04 Dec 2016. Any correction still needed can be communicated along with justification by mailing to timetable@msbte.com Examination of different semesters scheduled on same day but in different slots shall not be considered as clash.